1. RESUME
A.RAM KUMAR, B.E.
Permanent Address: 97, Dharmapuram South Street,
Rajapalayam, Dist-Virudhunagar,
Tamilnadu.
Pin-626117
Tel (Res) Number : +91-8763529087
Current Location : Keonjhar, Odisa.
Mobile No. : +91 9937295172 E-Mail:ramkr0015@gmail.com
Objective
To develop my career as an executive where I will be a valuable team member,
contributing quality ideas and to work in an esteemed organization in order to exibit my
talents in a challenging work environment.
Computer Skills
Operating System:
• MS-Office
• AUTO CAD
Educational Qualification:
• Bachelor of Engineering (B.E) in Mechanical Engineering from SRI
CHANDRASEKHARENDRA SARASWATHI VISWA MAHAVIDYALAYA,
Kanchipuram, Tamilnaduin the year 2002-2006 having 7.23 CGPA (Deemed
University)
• Higher Secondary Education (XII) from N.A.A.M. HigherSecondary
School,Rajapalayam, Tamilnadu in the year 2002 having 71.25% (State
Board)
• S.S.L.C(X) from N.A.A.M. HigherSecondary School,Rajapalayam, Tamilnaduin
the year 2000 having 81.4 % (State board)
Present Experience:
• Name of Firm : ESSAR PROJECTS (I) LIMITED.
•
• Location : Keonjhar, Orissa
•
• Job Period : JULY 2013 – Till date
•
2. Departmant : Hydro testing
Designation : Deputy Manager, Regular Role.
Project : Joda-Paradeep Slurry Pipeline Project
(254 km), Orissa.
Client : Essar Steel Orissa Limited
Present Job Profile:
•
• Regular reporting like DPR on Hydrostatic testing progress.
•
• Cleaning, Gauging, Hydrotesting& Dewatering for 20” Diameter Pipeline.
•
• Pre-test & post hydrotesting of HDD Crossings.
•
• Identifying Leak detections during hydrotest.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Mainline welding and knowledge in pipe book preparation.
•
• Pre-test & post commissioning of 254 KM Long Iron Ore slurry line done
successfully within very short time.
• Commissiong work of various water loop line in ESSAR STEEL DABUNA
PLANT done.
• Modification works done from our side in case of any pressure loss in loop
lines.
• Commissiong of 28” inch water line from water Source River to Dabuna
steel plant done.
3. • 20” Dia Slurry line of 254 KM commissioning done within very short period
was completed.
•
•
Previous Experience:
•
• A.
•
• Name of firm : ESSAR PROJECTS (I) LIMITED.
•
• Job Period : NOVEMBER 2011 to JULY 2013
•
• Project : RANIGANJ COLD BED METHANE PROJECT
•
• Department : Hydro testing& commissioning Designation: DeputyManager
(Regular role)
•
• Client : M/s ESSAR OIL INDIA LTD
•
•
• Job Profile in JPSPL:
•
• Completed Cleaning, Gauging, Hydro testing & Dewatering For 18”, 16”, 12”, 8”
and 4”Pipeline of around 40Kms for product gas distribution.
• Leak detection done by calculating pressure drop differences and rectified.
• Comissining of pipelines completed after Nitrogen purging process.
• Minor hydrotesting for station piping which inculed number of MOVs done.
•
• B.
•
• Name of firm : ESSAR PROJECTS (I) LIMITED.
•
• Job Period : JUL-2010 to OCTOBER-2011
•
• Project : JodaParadeep Slurry Pipeline
•
• Department : Hydro testing Designation : Engineer.
•
• Client : M/s ESSAR STEEL ORISSA LTD
•
•
•
•
• Job Profile in JPSPL:
•
•
4. • Completed Cleaning, Gauging, Hydro testing & Dewatering For 20”Pipeline for
176Kms.
• Leak detection done and rectified.
• C.
•
• Name of firm : ESSAR CONSTRUCTIONS (I) LIMITED.
•
• Job Period : JUL-2009 to JUN-2010
•
• Project : VijaipurDadri Pipeline Project (VDPL) [Section A & C]
•
• Department : Hydrotesting Designation : Engineer.
•
• Client : M/s GAIL INDIA LTD Consultant : Engineers India Limited
(EIL)
•
•
• Job Profile in VDPL – Section A:
•
• Completed Cleaning, Gauging, Hydro testing & Dewatering For 48” Pipeline for 32
Kms.
• Commissioning activities Swabbing, Magnetic pigging, successful Electronic
Gauging Piging with TDWilliamson team (without a single damage), Vaccum drying
and Gas Charging of
• length 162 kms.
•
• Job Profile in VDPL – Section C :
• Completed Cleaning, Gauging, Hydro testing & Dewatering For 48”Pipeline for
102 Kms and Commissioning activities Swabbing, Magnetic pigging, successful
Electronic Gauging Piging with TDWilliamson team (without a single damage),
Vacuum drying and Gassing line of length 169 kms.
•
During this project I with my team has successfully completed HYDROTESTING of
a 38 km section which is one of largest Hydrotestsection of 48” dia pipeline.
•
• D.
•
• Name of firm : ESSAR CONSTRUCTIONS (I) LIMITED.
•
• Job Period : JUL-2008 to JUN-2009
•
• Project : Vadinar Bina Pipeline Project (VBPL)
5. •
• Department : Hydro testing Designation : Engineer.
•
• Client : M/s BHARAT OMAN REFINARIES LTD Consultant
:Engineers(I)Ltd
•
• Job Profile in VBPL Project:
•
• Completed Cleaning, Gauging, Hydro testing & Dewatering For 24”Pipeline for 346
Kms.
•
During this project myself with my team has successfully completed
HYDROTESTING of a 40 km section which crosses the DAHOD district difficult
terrain areas which was considered as the best work done and achievement by our
team.
_________________________________________________________________
_________
•
•
•
•
• E.
•
• Name of firm : NARMADA OFFSHORE CO PVT LTD, MUMBAI
•
• Job Period : JUL-2007 to JUN-2008
•
• Project : East WestPipeline Project (EWPL)
•
• Department : Hydro testing Designation : Junior
Engineer.
•
• Client : M/s RELIANCE Consultant : Reliance
Engineering
• Associate Ltd
(REAL)
•
• Job Profile in EWPL Project:
•
• Completed Cleaning,Gauging, Hydro testing & Dewatering For 48” Pipeline of 62
Kms OF 48” GAS PIPELINE.
• Electronic Gauging Piging with TDWilliamson team done between (48” 27 kms
Internal coated line) Mosi River to IP Station at Andhra Pradesh.
• Carried out Pigging (Cleaning, Gauging & Flooding) of onshore pipelines.
• Carried out Hydro testing of Onshore pipelines
• Carried out Dewatering, Swabbing.
6. • _____________________________________________________________________
___________
• F.
•
• Name of firm : CHENNAI METCO PVT LTD, AMBATTUR (CHENNAI)
•
• Job Period : MAY-2006 to JUL-2007
•
• A metallurgy based company that builds metallurgical lab machine and also one of the big
company in India.
• Designation : Service Engineer.
•
Job Profile:
•
• Production of Metallurgy and Metrology based machines.
• Servicing those Indian or Foreign made machines.
• Having very good experience in handling of hardness checking machines.
• Having good knowledge in sperating a specimen for a mother piece for hardness
cheching and microstructure checking process.Good experience in handle
metrological lab machines like Metal cutting machines ( with abrasive cutting wheel
) with cooling medium ,Table grinder ,
•
•
•
•
• Moulding machine (with bakalite), Polishing machine ( auto and manual ) upto
Etching process for GOOD MICROSTRUCTRE VIEW.
• Servicing those Indian or Foreign made machines
Work handled:
• Assembling of machine spares.
• Repair service, Machine installation and Demonstrations for operating.
• Exposure in Electrical and Basic Automation.
•
Personal Skills:
• Ability to deal with people delicately, Team Facilitator.
7. • Problem Solving abilities
• Willingness to learn new things
• Good listener with good communication skill.
•
Personal Profile:
Name : A.Ramkumar
Father’s Name : Mr. P.V.Arjuna Raja
Date Of Birth : 9thDecember 1984
Nationality : Indian
Marital Status : Single
Gender : Male
Languages Known : Tamil, Telugu, English and Hindi.
PASSPORT NO : G 1916321
PASSPORT VALIDITY : 12/03/2017
Declaration:
I hereby declare that the above particulars are true to the best of my knowledge
and I assure you that I will work in the right earnest and fulfill the expectations of
my superiors.
Place: ODISHA (A.
Ramkumar)