MCQ

1. Er. Sunil Kumar Yadav Page 1
Drawing technique 10%
From RKS
1. The isometric length of the edge of the edge of a cube is :*
a) Less than actual length
b) Equal to actual length
c) More than actual length
d) All of the above
2. Drawing is the engineers :*
a) Tool
b) Language
c) Machine
d) All of above
3. The needle point of the compass should be ……….the lead point :
a) Equal to
b) Longer than
c) Shorter than
d) All of above
4. Drawing pins/ cello tapes are used to :
a) Draw a drawing
b) Move the drawing
c) Fix the drawing
d) All of the above
5. To draw or measure angles, we use :*
a) Set square
b) T –square
c) Protractor
d) All of the above
6. The projection of any feature on the horizontal plane s called :
a) Plan
b) Elevation
c) Map
d) All of the above
7. The purpose of making the drawing board with seasoned soft wood :*
a) Easy to carry
b) For fixing of drawing paper with the help of drawing pin
c) To match with T- square
d) All of the above
8. In case of aligned method of dimensionsioning , they can be readable from :*
a) Bottom and right side of drawing sheet
b) Bottom and left side of drawing sheet
c) Bottom and top side of drawing sheet
d) All of the above
9. The main objective of writing letters/ alphabets on the drawing is to make the drawing :*
a) More fantastic
b) More informative
c) More expansive
d) All the above
10. In case of perspective projection , picture plane is placed : *
a) Between eye and object
b) Outside of eye towards eye
c) Outside of object towards object
d) All of the above
11. Hatching line is a line which makes an angle of 450
with :*
a) Horizontal
b) Vertical
c) Main line of the section
d) All of the above
12. The techniques for freehand sketch to drawing straight line is :*
a) Fixing two end point b) Fixing length of the line

2. Er. Sunil Kumar Yadav Page 2
c) Fixing the center of line d) All of the above
13. The point if intersection of co-ordinate axis is called :*
a) Zero-point
b) Origin
c) Cross point
d) All of the above
14. Topographic map is used to represent the :*
a) Artificial detail
b) Natural detail
c) Construction detail
d) All of the above
15. Concept drawing is normally provided for the work of :*
a) Before construction
b) Simultaneously with construction
c) After construction
d) All of the above
16. As built drawing is normally construction :
a) Before construction
b) Simultaneously with construction
c) After construction
d) All of the above
17. When a drawing is made to the same size of the object , the name of the scale is :
a) Enlarged
b) Full size
c) Reducing scale
d) All of the above
18. To draw small objects the scale used is :
a) Enlarged
b) Full size
c) Reducing scale
d) All of the above
19. The ratio of distance on the drawing sheet and corresponding actual distance of the object
is known as :
a) Reducing size scale
b) Full size scale
c) Representative factor (RF)
d) All of the above
20. The point in space where parallel lines meet are called :*
a) Station point
b) Vanishing point
c) Origin
d) All of the above
21. An isometric projection is pictorial drawing of :
a) One view
b) Two view
c) Three view
d) All of the above
22. The receding lines in an isometric projection are drawn :
a) Parallel
b) Perpendicular
c) Inclined to each other
d) All of these
23. Orthographic projection means :
a) Projection in 300
b) Projection in 450
c) Projection in right angle triangle
d) None of above
24. One of the characteristic features of a perspective drawing is that objects are drawn :
a) Same size irrespective of distance
b) Larger as their distance from the observer increases
c) Smaller as their distance from the observer increases
d) One of these

3. Er. Sunil Kumar Yadav Page 3
D PRADAD
25. The edge of drawing board where T- square is made to slide is called :
a) Sliding edge
b) Fixing edge
c) Working edge
d) All of the above
26. Working edge of drawing board is kept ……………of the user :
a) Left
b) Right
c) Ahead
d) All of the above
27. Set squares are not used to draw :
a) Straight line
b) Vertical line with T-squre
c) Horizontal line
d) All of the above
28. Drawing pin/cello tapes are used to :
a) Draw a drawing
b) Moves the drawing
c) Fix the drawing
d) All of the above
29. The shape of scales are :
a) Flat and triangular
b) Flat and rectangular
c) Flat and square
d) All of the above
30. Dashed (dotted ) lines is used for indication :
a) Edge of the object
b) Hidden edge of the object
c) Center lines of the object
d) All of the above
31. Perspective projection is used to represent :
a) Real exact size of object
b) Real exact shape of object
c) Natural view of the object
d) All of the above
32. Picture plane is :
a) Transparent
b) Opaque
c) Semi transparent
d) all of the above
33. Why perspective drawing is done by engineer :
a) It is easy to express in the market
b) Shape is confirmed
c) Exact size is not measured
d) All of the above
34. View of circle in orthographic is :
a) Ellipse
b) Circle
c) Ellipse and circle
d) Triangle
35. Axonometric drawing is a drawing like :
a) Parallel to the plane
b) Perpendicular to the plane
c) Inclined to the plane
d) All of the above
36. Concept drawing is normally provided for the work of :
a) Tender
b) Construction
c) Revise estimate
d) All of the above
37. For drawing of small objects , the scale used is :
a) Enlarged
b) Full size
c) Reducing
d) All of the above
38. The principal of oblique view drawing is to keep :
a) Width axes of 900
b) Width and height axes at 900

4. Er. Sunil Kumar Yadav Page 4
c) Width ,height and depth axes at 900
d) All of the above
39. Engineers prefer to make …………..sketches than to pictorial sketches to clean the shape
of an object :
a) Orthographic
b) Perspective
c) Auto CAD
d) All of the above
40. Pencil drawings are generally corrected or revised with the help of :
a) Razon blade
b) Eraser shield
c) Ink
d) All of the above
41. The free hand drawing of a ordinary room is generally :
a) One point perspective
b) Two point perspective
c) Three point perspective
d) All of the above
42. Which one is not drafting equipment :
a) Drafter
b) Dust cloth
c) Scale
d) None of the above
43. French curve is used to draw :
a) Regular curve
b) Circle
c) Irregular curve
d) None of the above
All the best
Answer:
1 A 11 C 21 C 31 C 41 B
2 B 12 A 22 A 32 A 42 D
3 B 13 B 23 D 33 A 43 C
4 C 14 B 24 C 34 C
5 C 15 A 25 C 35 B
6 A 16 C 26 A 36 A
7 B 17 B 27 C 37 C
8 A 18 A 28 C 38 B
9 B 19 C 29 A 39 A
10 A 20 B 30 B 40 B