This document is a specification sheet for DP flow transmitters. It contains information about the tag number, service, line details, fluid properties, operating parameters, primary element details like the orifice plate or pitot tube, transmitter mounting, secondary instrument details, and calibration information. The primary element will be either an orifice plate or averaging pitot tube. Key parameters like maximum and normal flow, pressure, and temperature are specified. The transmitter will either be direct mounted or remote mounted.
1. S-1
DP Flow Transmitters
DP Flow Specification Sheet
00815-0100-4485, Rev AA
2013
DP Flowmeters SHEET__________ OF__________
SPEC. NO. REV.
NO BY DATE REVISION
CONTRACT DATE
REQ. - P.O.
BY CHK’D APPR.
Tag Number
Service
Line No./ Meter Location
Fluid
Line Size and Pipe Schedule OR
Pipe ID and Wall
Thickness
Pipe Material
Pipe Orientation
Fluid
Fluid State
Max Flow
Normal Flow
Normal Pressure
Normal Temp.
Base Pressure
Base Temp.
Specific Gravity at Base
Operating Specific Gravity
Mol. Weight Cp/Cv
Operating Viscosity
Quality % or Superheat
Base Press Base Temp.
Select Primary
Element
Check one and fill in corresponding information below:
Orifice Plate
Averaging Pitot Tube
Other:___________________________
Integral Temperature Yes No
2. DP Flow Specification Sheet
00815-0100-4485, Rev AA
2013DP Flow Transmitters
S-2
Orifice Primary
Element
Check one:
Standard (one hole plate)
Conditioning (multi-hole plate)
Beta = d/D
Orifice Bore Diameter
Line ID
Plate Material
Vent or Drain Hole
Plate Thickness
Connection Type
Plate Type
Tap Type
Flange Type
Flange Rating
Flange Material
Standard (AGA, etc)
Averaging
Pitot Tube
Primary Element
Line ID
Sensor Material
Mounting Style ___________________________________
Check all that apply:
Wafer Style
Compression Sealing Mechanism
Opposite Side Support Required
Flanged - Flange Rating________________________
Threaded
Hot-Tap
Other Primary
Element
Body Material
Wetted Material
Pressure Rating
Tap Type
Beta Ratio
Bore Size
Throat Size
Flow Coefficient
Standard/Approvals
Other Information:
Transmitter
Mounting
Check one:
Direct Mount
Remote Mount
Secondary
Instrument
Secondary Instr. Tag
Transmitter Type – Check one and fill out the corresponding calibration
information below:
Mass or Energy Flow(1)
- Compensation Level__________________________________
Differential Pressure
3. S-3
DP Flow Transmitters
DP Flow Specification Sheet
00815-0100-4485, Rev AA
2013
Flowmeter
Calibration
Differential Pressure LTV=_______________ UTV=_______________ Units=___________
Pressure LTV=_______________ UTV=_______________ Units=___________
Temperature LTV=_______________ UTV=_______________ Units=___________
Notes
(1)Transmitter that provides real-time fully compensated mass, energy, and totalized flow by measuring differential pres-
sure, static pressure, and process temperature