Presentacion Software flow applicator

1. 20/11/2012
Products Solutions Services
Applicator 10.14 Release notes
Focused on Flow
Slide 1 H.Freimark/MTP

2. 20/11/2012
Applicator 10.14 Release notes
Overview
• General
• Applicator Tutorial
• Applicator suitable for Tablet-PCs (e.g. iPad)
• Optional link to product configurator and online shop
• Selection Flow:
• Automatic setting of Turn-Down Class on requested
min/max flow
• New attributes and parameter help for dp-Flow
• New instruments within principle dp-flow
Venturi tubes, nozzles, special design orifices
• Sizing Flow:
• Pressure loss indication 2 digits after point
• Improvement for gas applications
• Free Air delivery
• New fluid calculation standard "Ideal gas"
• New fluid type: Natural gases
• Input of gas component share in Mole% or mass%
• Composition of humid gas mixtures
• Speed limits for gas oxygen applications
• Visibility of super critical gas data
• Custody transfer
• Improved sizing regarding MI-002 and
PTB 7.251
• New pulse value units and indication of
referenced data on printouts
• New units
• Mole%-Mass%
• Acre foot (AF)
• Cubic Foot (CF)
• Prosonic Flow
• Prosonic flow B 200
• Additional calibration option
• Order code fragment of gas type
• Sensor selection help for Prosonic Flow Clamp On
• Vortex
• Schedule 80 for Prowirl W
• Min. and max. values of Reynold and frequency
values
• Coriolis
• Limits for pressure loss calculation of new Proline
Promass products
Slide 2 H.Freimark/MTP

3. 20/11/2012
Applicator 10.14 Release notes
Overview
• dp-Flow
• Noise level calculation for orifices, venturi tubes and
restriction orifice
• Power loss calculation for all dp-flow instruments
(dp-flow password level: engineered solutions)
• Restriction orifice calculation
(dp-flow password level: engineered solutions)
incl. noise level, multihole and plate thickness
calculation.
• Improved parameter help
• Sizing Gamma:
Slide 3 H.Freimark/MTP

4. 20/11/2012
Applicator 10.14 Release notes
General – Applicator tutorial (Web based training)
Start the Applicator
tutorial right here.
The tutorial gives a general
overview, but is focusing
on the training of Sizing
flow
• Self learning
• Easy dig in for
Applicator newcomers
Slide 4 H.Freimark/MTP

5. 20/11/2012
Applicator 10.14 Release notes
Applicator suitable for Tablet-PCs
• Applicator Online version is easily operated by mobile devices
• Good experience could be made with
• the Apple I-Pad (OS6.0.1 or higher is recommended)
• and Samsung Galaxy Note 10.1 (OS Android 4.0)
• Ideal for quick product selection and sizing
Slide 5 H.Freimark/MTP

6. 20/11/2012
Applicator 10.14 Release notes
Optional link to product configurator and online shop
• Sizing button area with
two options:
• Configurator
• Add to shop basket
(First available with
next Online shop
release)
Slide 6 H.Freimark/MTP
• Link to product configurator
with one product
• Link to shop basket with one or
more products

7. 20/11/2012
Applicator 10.14 Release notes
Automatic setting of Turn-Down Class
• Automatic setting of
Turn-Down Class on
requested min/max flow
input
• Improvement of selection
process
Slide 7 H.Freimark/MTP

8. 20/11/2012
Applicator 10.14 Release notes
New attributes and parameter help for dp-Flow
• New attributes and
parameter help for dp-
Flow
• Easier determination and
selection of fitting primary
elements
• Improved parameter help
Slide 8 H.Freimark/MTP

9. 20/11/2012
Applicator 10.14 Release notes
New instruments within principle dp-flow
• DV61S
Venturi Tube
• DN61S
Venturi nozzle
• DN62S
ISA1932 nozzle
long radius nozzle
• DO69S Orifice
special designs
Slide 9 H.Freimark/MTP

10. 20/11/2012
Applicator 10.14 Release notes
Sizing Flow – Gas improvements
Free Air delivery
• is mainly used e.g. for compressed air applications, where the requested
flow is given in “free air delivery” condition
• Only supported by selected volumetric units e.g. m3/h, l/h…
1. Press “Calculated requested flow” button 2. Put in your Requested flow 0
Slide 10 H.Freimark/MTP

11. 20/11/2012
Applicator 10.14 Release notes
Sizing Flow – Gas improvements
New fluid calculation standard "Ideal gas“
• An easy way to define own user gases (Dummy-Gas)
• Reliable results of gas properties with operating pressure less 20 bar
• Just start with Dummy-Gas (Air based on Ideal gas
• Reduced input of gas data
• Molar mass or
• Density at 0°C and 1.013 bar_a
Slide 11 H.Freimark/MTP
This drop down
enables the
switch between
several fluid
standards

12. 20/11/2012
Applicator 10.14 Release notes
Sizing Flow – Gas improvements
New fluid type: Natural gases
• Quick selection of Applicator system gases
Slide 12 H.Freimark/MTP

13. 20/11/2012
Applicator 10.14 Release notes
Sizing Flow – Gas improvements
Input of gas component fraction in Mole% or Mass%
• Select your favorite unit for input the gas mixture fractions
• Mainly the process data are available in Mass%, but Applicator’s Gas Engine
and the t-mass needs Mole%
• On sizing print report both values are indicated
On Gas mixtures page:
On print report:
Slide 13 H.Freimark/MTP

14. 20/11/2012
Applicator 10.14 Release notes
Sizing Flow – Gas improvements
Composition of humid gas mixtures
• Up to now Applicator’s gas engine could handle dry gases only
• New: Humid gas mixtures with component water
• A warning message indicates the max. share of water based on 100% relative
humidity. In this case the share has to be reduced or process conditions
adapted.
• Restricted flow meter are marked (Red) on Gas mixture page
Slide 14 H.Freimark/MTP

15. 20/11/2012
Applicator 10.14 Release notes
Sizing Flow – Gas improvements
Speed limits for gas oxygen applications
• Increased safety in sizing of oxygen applications
• According standard EIGA IGC13/12 the check is executed
• The max. velocity in the flow meter is checked depending on process pressure
range
• Beside a general disclaimer dedicated warnings are created depending on the
selected sensor material
Slide 15 H.Freimark/MTP

16. 20/11/2012
Applicator 10.14 Release notes
Sizing Flow – Gas improvements
Super critical gas data on fluid pages and print reports
• Calculated fluid properties of super critical gases could
dissent in Applicator e.g. sound velocity
• User invitation to correct data manually
• Warning messages appear under supercritical conditions
incl. the documentation on print reports
Slide 16 H.Freimark/MTP

17. 20/11/2012
Applicator 10.14 Release notes
Sizing Flow – Custody transfer
Improved sizing of flow meters regarding approvals
MI-002 and PTB 7.251
• Pressing “Optimize operating range” leads to:
• Max. possible flow range is set
• Max. possible temperature is set
• Warning about pressure range is indicated
Goal: Achieve optimized
operating ranges for
• Flow
• Pressure
• Temperature
Slide 17 H.Freimark/MTP

18. 20/11/2012
Applicator 10.14 Release notes
Sizing Flow – Custody transfer
New Pulse value units for pulse value setting on Custody transfer page
indication of referenced data on print outs
Slide 18 H.Freimark/MTP

19. 20/11/2012
Applicator 10.14 Release notes
Prosonic Flow B 200
• Chart with new calibration
option
• Current: 3…30m/s 1.5%
• New: 1…30m/s 1.5%
• Example with pressure
loss including flow
conditioner
• Extended order code determination
Process connection, Calibration, Flow conditioner, Gastype
Slide 19 H.Freimark/MTP

20. 20/11/2012
Applicator 10.14 Release notes
Sensor selection help for Prosonic Flow Clamp On
Slide 20 H.Freimark/MTP
• pipe size
• process temperature
• pipe thickness
• pipe material
With a click on
the Flow sensor
selection table opens
with recommendations
depending on:

21. 20/11/2012
Applicator 10.14 Release notes
Vortex
Schedule 80 for Prowirl W
• Schedule selection option: 40/80
• Meter sizing with right dimensions
Slide 21 H.Freimark/MTP
Calculation min and max. Reynolds and Frequency values

22. 20/11/2012
Applicator 10.14 Release notes
Coriolis
Limits for pressure loss calculation of new Proline Promass products
• A reliable calculation of the pressure loss is possible between Re 50 and
10.000.000
• A warning message informs the user
Slide 22 H.Freimark/MTP

23. 20/11/2012
Applicator 10.14 Release notes
dp-Flow
• Noise level calculation for orifices, venturi tubes and restriction orifices
• Power loss calculation for all dp-flow instruments
(dp-flow password level: engineered solutions)
• Accessible in the ‘More Info DP’ - window
Slide 23 H.Freimark/MTP

24. 20/11/2012
Applicator 10.14 Release notes
dp-Flow
Slide 24 H.Freimark/MTP
• DR61S Restriction orifice calculation
dp-flow password level:
engineered solutions, incl.
• noise level calculation
• multihole calculation
• plate thickness calculation.

25. 20/11/2012
Products Solutions Services
Thank You!
Slide 25 H.Freimark/MTP