1. 1
Mob – +919619379221, +918469074404
E-mail: jayantsinghbegu@gmail.com
E-mail: jayantsingh54@yahoo.com
PROFESSIONALEXPERIENCE
Total Working Experience in Year: 4 Years.
ORGANISATION#4: -L&T HEAVYENGINEERINGL.L.C,OMAN
Hiring Thru: AL Qiladah International Trading & Contracting L.L.C
Designation:QualityControlEngineer
Department:QualityControl
Location:SoharLLC Oman
Duration:29th March,2015–20th April-2016
SIGNIFICANTPROJECTSHANDLED
 Current Project: Leading the ORPIC [Oman Oil Refinery & Petroleum Industries Company] EPCC-2 Project
 (Pre-shutdown and shutdown work of LPG Merox Unit, PRU Unit, HMTD : Modification job for
existing/Installation of new equipment, piping modification ,Trays(Internals) replacement of
vessels, columns static, rotary equipment and heat exchangers)
 SIGNIFICANTPROJECTSHANDLED
 In hand experience on the following L&T OMAN (LLC) Projects
 Sour water stripper :
 Customer : DPJV,ORPIC (Oman Oil Refinery & Petroleum Industries Company EPCC-2 Project)
 STRIPPER (C-4603) :
 Customer : DPJV,ORPIC (Oman Oil Refinery & Petroleum Industries Company EPCC-2 Project)
 ISOMERATETANK :
 Customer : DPJV,ORPIC (Oman Oil Refinery & Petroleum Industries Company EPCC-2 Project)
 LPG PRODUCT TANK :
 Customer : DPJV,ORPIC (Oman Oil Refinery & Petroleum Industries Company EPCC-2 Project)
 HTHR BOILER (HIGH TEMPERATURE HEAT RECOVERY, DOUBLE TUBE BOILER) :
 Customer : RELIANCE INDUSTRIES LIMITED , JAMNAGAR , INDIA(J3-Package)
 STEAM DRUM :
 Customer: RELIANCE INDUSTRIES LIMITED , JAMNAGAR , INDIA(J3-Package)
 Riser and Down comer Piping :
 Customer : RELIANCE INDUSTRIES LIMITED , JAMNAGAR , INDIA(J3-Package)
 Coke Drum (4 Nos.):
 Customer : DPJV,ORPIC (Oman Oil Refinery & Petroleum Industries Company EPCC-2 Project)
JAYANT.SINGH

2. 2
RESPONSIBILITIES:-
 Ensuring quality standards as per ASME manual, ISO 9000-2008 quality manual are met by the department.
 Inspection of fabrication & welding of Carbon steel, Low Alloy steel, Stainless steel, Inconel, duplex tubes, plates, pipes and
forgings. (Thickness Min 1.63mm to Max 235mm).
 Inspection of welding processes such as SMAW, GTAW, SAW, ESSC, FCAW etc.
 Co-ordination with shops for the inspection coverage of the third party inspection agencies / customer representatives.
 Analysis of Non-conformity reports and implementation of corrective and preventive actions. (Use of system i.e. PLM for
flow of NCR)
 Preparation of Quality Control plan, testing procedures i.e., Hydro test, Pneumatic test, Visual test, PMI/chemical Analysis,
Ferrite test etc. as per customer specification/ codes.
 Inspection of weld edge preparation / fit ups as per approved drawings and codes.
 Verifying correctness of consumables and proper baking / storage.
 Ensuring proper preheating and monitoring welding parameters during welding as per approved WPS.
 Visual, dimensional inspection after completion of welding as per code/ specification.
 Verifying heat treatment procedures, witnessing heat treatment arrangement and reviewing heat treatment charts of
equipment as per HTR/code.
 Inspection of surface preparation and coating of finished equipment i.e. pickling and passivation, shot blasting and
painting.
 Witnessing hydro test/ Pneumatic Test as per hydro/pneumatic test procedure and code.
 Ensuring thickness, hardness, ferrite, material chemical composition through use of instruments.
 Updating seam wise and part wise clearance of equipment in system i.e. Baan.
 Dealing with third party / customer inspection agencies for the clearance of inspection stages as per Quality Control Plan.
 Preparation and submissionof quality control documents to customer after signing off TPI release note as per customer
requirements.
 Preparation of other inspection documents and submission to Quality Assurance for retention purpose.
 Dealing with third party inspection agencies like BV, TUV, Lloyds Registrar, Velosi etc. and Process licensors like FLOUR etc.
 Preparing & getting approved Indian Boiler Regulation Form-II, III ,IIIA & IVA for IBR equipment.
 Maintaining records of list of calibration of measuring instruments.
 Preparation of final dossier for all handled projects as per customer specification requirements.
ORGANISATION#3: BectochemLodigeProcessTechnologyPrivateLimited
Designation:Jr.QualityControl Engineer
Department:QualityControl
Location:Ankleshwar,Gujarat
Duration:9th April,2014–6thMarch,2015
RESPONSIBILITYPROFILE
o Monitor and Audit the Quality of all manufactured goods.
o Responsible for Quality System Maintenance.
o Responsible for continual improvement to enhance Quality System.
o FAT.( Factory Acceptance Test )

3. 3
o Vendor inspection.
ORGANISATION#2: LARSEN&TOUBROLIMITED,INDIA.
Hiring Thru: M/S Shree Krishna Engineering
Designation:QualityControlEngineer
Department:QualityControl
Location:Hazira (Surat),Gujarat
Duration:08st April-2013–01st May-2014,
SIGNIFICANTPROJECTSHANDLED
 In hand experience on the following L&T Projects
Key Features of AMMONIA CHILLER
o Equipment description: AMMONIA CHILLER
o Customer : IOWA ,USA.(AI+KBR)
o Equipment description: EO REACTOR , Sadaara Projects.
o SCRUBBER,CHAR VESSEL,TAR VESSEL & GASIFIER
o Customer : RELIANCE INDUSTRIES LIMITED , JAMNAGAR , INDIA(J3-Package)
RESPONSIBILITYPROFILE
o Verify the correctness of the raw materials like Plates, Pipes, Forgings, Fittings and Fasteners as per Purchase orders.
o Review the Mill Test certificates for compliance with Codes and Standards.
o Prepare Test Certificate Discrepancy Report (TCDR) and resolving the same.
o Physical verification of Raw materials by conducting Dimensional measurements and Visual inspection at receipt.
o Prepare Material Clearance Records (MCR) for pressure & non-pressure parts and get it reviewed by TPI/Customer representative.
o Prepare Quality Control Plan (QCP) w.r.t requirements of Customer specification and Codes.
o Prepare Inspection procedures like Hydrostatic test, PMI test and Hardness test w.r.t requirements of Customer specification and
Codes.
o Perform Stage inspections as per approved Quality Control Plan (QCP).
o Inspect Stage inspection like Set-up, Weld visual and Dimensional measurements.
o Prepare Stage Inspection records & Get it inspected by TPI/Customer.
o Review PWHT/LSR chart w.r.t Heat Treatment Request (HTR), Codes and standards.
o Conduct Hardness measurements by Portable Hardness tester.
o Witness Hydrostatic testing of Vessel/Vessel components.
o Perform unscheduled inspection (Spot check) to monitor welding parameters w.r.t WPS requirements
o Prepare Non-Conformity Report and resolving the same.
o Co-ordination with Third Party Inspectors on daily inspection activities
 ORGANISATION#1: SHAKTI Engineering & Fabrication
 Designation:QualityControl Engineer

4. 4
 Department:QualityControl
 Location:Hazira(Surat),L&T Gujarat
 Duration:25st May-2012–05st April-2013,
INDUSTRIAL VISIT
o Trainingon“powergenerationand oilrefining“inIndianOilCorporationLimited(RefineriesDivision)BarauniRefinery
(BIHAR)
o Managementtrainingfrom C&HAssociate(UAE)
o MemberofINDIAN SOCIETYOF MECHANICAL ENGINEERS
EDUCATION&TECHNICAL PROFICIENCIES
o Bachelor’s of Mechanical Engineering
Graduated (6.76) BE – Mechanical from ANNAMALAI UNIVERSITY, CHIDAMBARAM TAMILNADU
o MicrosoftOffice
o Microsoftwords
o Well conversantwith ERP (BAAN-QMS)
o (Systems, Applications & Products in Data Processing) SAP
PERSONAL DETAILS
Father's name : S.K. Singh
Date of Birth : 01/04/1989
Sex : Male
Marital Status : Single
Nationality : Indian
Proficiency in languages : English, Hindi
Postal Address : P.O.Box:400058- Andheri -mumbai
PassportNo. : K 0637434
Date:
o Place: Bihar
[Jayant Singh]