1. Curriculum Vitae
Position : QC Welding Inspector
Name : Mr. Phairat Into
Place of Birth : Singburi
Age : 43 Years
I.D. Card No. : 3170500031987
Nationality : Thai
Religion : Buddhism.
Height : 168 cm.
Weight : 63 kg.
Permanence Address : 1696 Moo.6, Soil Bearing 48, Sukumvit 107 Rd. Samrongnua
Muang Samutprakarn Thailand 10270.
Mobile Phone No. : +6681-4933301
E-mail : rat.into@hotmail.com
CERTIFICATIONS :
- CSWIP 3.2.2 Senior Welding Inspector with RI(Cert. 77417)
- API 653 Oil Storage Tank Inspector Cert. No. 42296
- API 570 Piping Inspector Cert. No. 45776
- Radiographic Testing ASNT Level III (RT) ID#192048
- Ultrasonic Testing ASNT Level III (UT) ID# 192048
- Magnetic Particle Testing Level III (MT)# 192048
- Visual and Optical Testing ASNT Level III (VT)#192048
- Dye Penetrant Testing Level II (PT)
( According to SNT-TC 1A Edition 2011)
- BOSIET: Basic Offshore Safety Induction & Emergency Training
(Cert. No 63745700151113946818)
- Radiographic Interpretation (Certificate of Attendance)
EDUCATION : - Bachelor’s degree from Dhurakijbundij UNV.
- High School.
JOB KNOWLEDGE :
QA/QC, Welding, Coating and NDT inspections for Piping fabrications,
Offshore pipeline subsea and piping installation, Tank fabrications, Pressure
equipment fabrications, reviewing and qualifying of welding procedures, visual
inspection, dimensional check, final inspection and witnessing hydrostatic
testing, pipeline, process piping, inspection of petroleum storage tank, valves,
heat exchanger, super heater coils boiler, pressure vessel, drums, tube sheet and
heavy structure fabrications.
Plant inspections for integrities of oil storage tank, process piping and
pressure vessel in compliance to the requirement of API standards and evaluated
the results of inspection and reports to clients. And recommended to client in
critical location for replacement or more frequency of inspections. Inspection of
repaired items of equipment.
NDT [ RT, UT, MT, PT ] hands on experience in diversified jobs.
Radiography interpretation, and witness testing weld joint by NDT. Review of
NDT reports supervising and monitoring of quality records/ test package and
related documents. interpretation of code , standard and specifications
preparation of quality plan and process flow chart..
Inspection of process piping in accordance with API 570
Inspection of oil storage tank in accordance with API 653

2. Inspection of pressure vessel and pressure equipment
WORKING EXPERIENCE
Nov, 2013-Present : QC Welding Inspector - OFFSHORE
COMPANY : NIPPON STEEL & SUMIKIN ENGINEERING K1 & K2 / OTI
PROJECT : PTTEP BONGKOT-ARTHIT FIELD LONG TERM CONTRACT
Responsibilities : Inspections of sub-sea pipeline laydown, offshore structural Jacket, deck
platform and facilities for BONGKOT which including following
activities;
- Inspection of received materials
- Inspection of weld preparations are in compliance to each WPS used
- Ensure all welding equipment and tools used are corrected as required
- Welding consumable control i.e. baking , holding and issued to welder
- Welding consumable qualification test.
- Preheat and inter pass temperature control before and during welding
- Ensure all parameter are compliance to WPS used.
- NDT request and review relevance reports
- Dimension check before and after welding are conformed to approved
DWG.
- Visual inspections after completion of welding
- NDT request and review relevant reports
Aug,2013-Dec,2013 : QC Inspector at Pipe Support Asia. (Thailand)
COMPANY : OMIC/MISUBISHI HEAVY INDUSTRY
PROJECT : POWER PLANTS/Saudi Rabigh Phase II
Responsibilities : Inspection of pipe support fabrications for power plant pipeline which
including following activities;
- Review of WPS as per code, standard and project specification,
- Witness and approval of welder qualification
- Conduct fit-up inspection, welding visual inspection and cross
verification of weld quality by NDT.
- Inspection for painting/coating hot dip galvanize.
- Dimension checked to ensure are in accordance with the drawing.
- Review and sign-off NDT reports i.e. MT, RT, UT and PT reports,
heat treatment chart and test packs.
- Non Conformity Reports Formalization and follow-up of the
corrective actions.
- Review and sign-off certificates of conformity.
Apr, 2013-June, 2013 : WELDING/PIPING INSPECTOR
COMPANY : CUEL Limited
PROJECT : CARIGALI HESS WHP 10 DEVELOPMENT- OFFSHORE
Responsibilities : Inspection of pipe riser and flow line installations and testing in according to
CARIGARI HESS project specifications and/or CUEL procedures and ASME
B 31.3. and inspection of structural installations in according to AWS D 1.1
Dec, 2009-Mar, 2013 : QA/QC MANEGER
COMPANY : PAE (THAILAND) Public Co., ltd.
PROJECT : PTTGC VAPOR RECOVERY UNIT PROJECT and PTTEP( S1)
Responsibilities : Directs activities of the quality control teams to ensuring that the team of
personnel work accurately and effectively to produce quality products or
services. Encouraging the team to follow methods and procedure of quality

3. control and production flowing at a consistent pace in compliance with
applicable code, standards and client’s project specification and control the
following activities:
- Plant inspections for integrities of oil storage tank, process piping and
pressure vessel in compliance to the requirement of API standards and
evaluated the results of inspection and reports to clients. And
recommended to client in critical location for replacement or more
frequency of inspections. Inspection/monitoring of repair items.
- Welding inspection of plant piping, pressure vessel and structural
fabrication and installation
- Implement project quality plan in assigned scope of works.
- Review of WPS, PQR, WPQR as per code, standard and project
specification,
- Monitoring constructions activities ensure compliance to the project
quality requirements.
- Review of WPS, PQR, WPQR as per code, standard and project
specification,
- Monitoring and controlling the project quality requirements.
- Interpretation of radiographic films and review of NDT reports
- Witness and approval of welder qualification, procedure qualification
- Ensure that the raw material and welding consumable are corrected in
compliance with the project specification and international standard
and code.
- Witnessing hydro test and mechanical testing of process piping and
weld test coupons.
- Inspection for painting/coating of piping and steel structure.
- Review and approval of quality record; i.e. Inspection test plan quality
work procedures, method statements, weld joint isometrics, weld
history documents and test packs.
- Conduct fit-up inspection, welding visual inspection and cross
verification of weld quality by NDT.
- Dimension checked to ensure are in accordance with the drawing.
- Observes testing of tank, piping and components for strength of
material and water/air tightness.
- Review and approval of NDT reports i.e. MT, RT, UT and PT reports,
heat treatment chart and test packs.
- Witness hydro test and flushing of tank and piping system etc.
- Liaise with classification society/inspection personnel for all
inspection activities.
- Conducting quality audit, verifying and suggesting for corrective and
preventive actions.
- Non Conformity Reports Formalization and follow-up of the
corrective actions.
Apr, 2008-Nov, 2009 :
POSITION : WELDING INSPECTOR/NDE SUPERVISOR
PROJECT : PLUTO LNG PROJECT
COMPANY : PAE TECHNICAL SERVICE Co., Ltd
(For STP& I Contract at Laemchabang Sea Port)
Responsibilities :
- Supervised an NDE teams (RT, UT, MT and PT) include technical
performance and documentations in accordance with the project
specification and as standard (as 2177.1, 2207, 1554.1, 2083).
- Record and reports for result to client and clarified of non-
conformance documents and Etc.,
- Witness WQT and PQR as per applicable procedure.

4. - Welding inspection for process piping fabrication inspection in
accordance with ASME B31.3
Nov,2007-Mar,2008 :
POSITION : QC/NDE SUPERVISOR FOR PLANT
INSPECTION
COMPANY : PAE TECHNICAL SERVICE Co., Ltd
DETAIL :
- Inspection of process piping in accordance with API 570
- Inspection of oil storage tank in accordance with API 653
- Conditions and corrosion monitoring
- Witness and monitoring all welding activities to ensure in accordance
with applicable standard or client specifications including
workmanship and documentation control as QC required.
- Dimension checked to ensure are in accordance with the drawing.
- PQR. and WQT, review mill certification of material & welding
consumable review equipment conditions. Visual inspection before,
during and after welding as specified by WPS and code, standard or
client’s specification, report of results such as PQR, Mechanical test
NDT results and etc.,
- Witness and supervise NDE and review of reports
- Witness hydro test and flushing of tank and piping system etc.
- Inspection for painting/coating of piping and steel structure
Mar,2007-Oct,2007
POSITION : NDE SUPERVISOR (OFF-SHORE)
COMPANY : PAE TECHNICAL SERVICE Co., Ltd
(UT.,RT. AND MT. INSPECTOR SUPPLIED FOR HYUNDAI
HEAVY INDUSTRY FOR OFFSHORE THIRD TRANSMITTAL
SUB SEA PIPELINE PROJECT.)
DETAIL :
- Supervising an NDT teams
- Manual Ultrasonic Testing on pipe for sub-marine pipe line between
PRP, Arawanand and Arthit in accordance with API-1104 and Project
specification.
- RT film interpretation and reports submitted to HHI.
Jan,2007-Mar,2007
POSITION : WELDING/NDE INSPECTOR
COMPANY : Samsung Heavy Industries Co., Ltd
PROJECT : Trans Thai Malaysia Project
DETAIL :
- Welding inspections, witness and monitoring to ensure the sound
welds are produced in accordance with standard; code and the
requirement of client’s specification including workmanship and
document control.
- Films interpreter for trans Thai Malaysia Project at Songkla province
- PQR. and WQT. Review mill certification material & welding
consumable
- Review equipment calibration certificate documentation control as
QC required.

5. - Visual Inspection before during and after welding as specified in
WPS.
- Dimension checked to ensure are in accordance with the drawing.
- Collate of all reports and submitted to clients.
Oct,2006-Dec,2006
POSITION : NDE SUPERVISOR
PROJECT : IRPC TURN-AROUND
DETAIL :
- Pressure equipments and process piping inspection as required in
inspection test plans.
Sep,2003-Sep,2006
POSITION : QC/NDE INSPECTOR
PROJECT : THE SECOND BANGKOK INTERNATIONAL
AIRPORT. (STEEL STRUCTURE)
DETAIL :
- Welding inspection for steel structure fabrication and installation.
- Welding inspection for piping fabrication and installation in according
to project specification .
- Witness for welder qualification testing, review WPS and mill
certificate of raw material & consumable and witness for WQT.
- Review X-ray films in accordance with ASME-IX, AWS.D.1.1
- Monitoring during welding such as voltage &current control, welding
sequence, inter-pass temperature control to ensure perform accordance
to WPS.
- Randomly dimension check before and after complete welding
- Visual inspection and dimension check after welding
- 100% UT.at BUTT Joint and 25% at full penetration T-Joint in
accordance to AWS D.1.1
- Blasting and paint as project specification requirement.
Jun-Jul,2003
POSITION : UT. INSPECTOR/QC INSPECTOR
PROJECT : CALPERS AT THAI HERRIC FAB. SHOP
DETAIL :
- Review WPS. Mill certifications and welder certification.
- Inspection of welding equipment and consumable inter-pass
temperature, welding sequence to ensure that accordance to WPS.
- Visual inspection of preparation before, during and after welding
in accordance with AWS D.1.1
- 100% UT. At completed joint penetration
May,2003
POSITION : NDE. INSPECTOR/QC INSPECTOR
PROJECT : NPC TURN AROUND
DETIAL :
- Inspection tube of boiler and pressure vessel. UTM. tube and shell
plate of boiler and water drum, UT. PT. and MT. at shell plate and
tube of water drum in accordance with ASME/ANSI B.31.1
- Arrange welding device and inter-pass temperature control
- Inspection for hydro-Static testing
-
Oct,2002-Apr,2003
POSITION : NDE INSPECTOR
PROJECT : BENCHAMAS EXPANSION PROJECT(CHEVRON-

6. OFF SHORE)
DETAIL :
- RT. Field welds of duplex pipe and interpreted films in
accordance with ASME/ANSI.B.31.3 and reported to Chevron’s
QA/QC Division
- UT., MT. at weld seams of platform expansion area in accordance
with AWS D.1.1
- PT. at duplex pipe in accordance with ASME/ANSI B.31.3
Sep,2001-Aug,2002
POSITION : NDE /QC INSPECTOR
COMPANY : HDS TECHNICAL SERVICE Co., LTD.
DETAIL :
- NDE supervised for inspection teams
- Review WPS and witness WQT for welder or welding operator
accordance to ASME-IX. AWS.D.1.1
- Monitoring during welding, joint preparation, inter-pass
temperature welding sequence and voltage/current check
- Dimensional check against AFC drawing and weld map.
- As-built drawing verifications.
- Inspection raw material for furnace and chemical piping.
- RT.,UT.,MT. and PT. for Viny-Thai turn around include
supervised inspection teams
- Witness for hydro-static testing for high pressure vessel.
Jun-Jul,2001
POSITION : NDE /QC INSPECTOR
PROJECT : ARC ON-STEAM
DETAIL :
- Survey locations and inspections of refinery pipe and pressure
vessel.
- UTM. To check wall thickness of pipe as required on ITP of
ARC requirements
Mar-Jun,2001
POSITION : NDE INSPECTOR
PROJECT : BONGKOT PHASE III-B DEVELOPMENT PROJECT.
(OFF-SHORE) PTTEP
DETAIL :
- Visual inspection of complete weld seams of piping and
structural in accordance with ASME/ANSI..B.31.3. AWS.D.1.1
- RT. At filed welds include modified pipe line between flare stack
and platform, review/interpretation films in accordance with
ANSI.B.31.3
- UT., MT., at weld seams of upper and flare stack in accordance
with AWS.D.1.1
Oct,2000-Feb,2001
POSITION : NDT SITE SUPERVISOR
PROJECT : TPI 150,000 BPSD REFINERY PROJECT. LUCKY
ENGINEERING
DETAIL :
- Supervise NDE teams in accordance to request specification
equipment and applicable code
- Interpret X-ray films in accordance with ANSI B.31.3 & B.31.1

7. - Witness WPS WQT for welder or welding operator
Mar,1998-Sep,2000
POSITION : NDE/WELDING INSPECTOR
PROJECT : MITSUBISHI HEAVY INDUSTRIAL/SIAM STRIP MILL
DETAIL :
- RT., UT., MT., PT. and holiday detector for H-Beam column
underground & above-ground piping in accordance with
AWS.D.1.1., ASWE/ANSI B.31.3
- Witness WQT. For welder or welding operator.
- Inspection for welding equipment and consumable, interpass
temperature control, welding sequence, voltage & current that
perform accordance to WPS.
- Visual inspection of completed weld seams.
- Blasting and painting inspection.
- Inspection for Pneumatic pressure teat.
- Coating and wrapping of underground piping inspection include
holiday detector inspection.
Familiar with codes and Standards:-
ASME Sec II, V, IX, VIII- Div 1 & 2, B31.1, 31.3, 31.4,31.8, 16.5, API 1104, 1107, 570, 571,574,
577, 578,579, 510,653,651,652,575,650
AWS D1.1,
EN 287, EN288,
AS 1554.1, 2207, 2177.1, 2177.2, 2062, 2083, 2980, 4037, 2314