Harvey Tool designs application specific mold tools including tapered rib cutters for milling channels in molds at various angles from 5 to 30 degrees. They offer tapered rib cutters in ball and square shapes with lengths of cut up to 10 times the end diameter and various taper and coating options. They also offer mold cutters for aluminum and steels with short lengths of cut, tapered necks for rigidity, and various neck angles and coatings suited for common mold draft angles. Clearance cutters are designed for deep cavity profiling and are offered in square and ball shapes with tapered necks for rigidity and various coating options.

1. Mold Tool & Die
Harvey Tool’s Application Specific Designs
Products, Features, & Benefits

2. Designed to mill 5°, 10°, 15°, 20°, or 30° channels in molds.
Runner Cutters

3. Tapered Rib Cutters - Ball
New
Angles
Tapered Rib Cutters – Ball
• Length of cut 10x end diameter
• Stocked in 0.5° to 15° tapers
• Offered in Uncoated and AlTiN Nano Coated

4. Tapered Rib Cutters - Square
New
Sizes
Long length design for deep cavity machining.
Tapered Rib Cutters – Square
• Length of cut up to 10x end diameter
• Stocked in 13 angles per side
• Coated and AlTiN Nano Coating options

5. Mold Cutters Ball – For Aluminum
New
Angle
Excellent in Aluminum & Other Non-Ferrous Materials!
• Very short length of cut and solid tapered neck for maximum rigidity
• 1°, 1.5°, 3°, 5°, and 7° neck angles to address common draft angles for molds
• 45° helix, large flute valley, and sharper cutting edge for faster chip removal and
better finish
• Offered with TiB2 coating to minimize galling and enhance performance

6. Mold Cutters
Ball - For Steels
New
Sizes
Excellent in Readily Machinable Mold Steels, Stainless Steels. & Tool Steels!
• Very short length of cut and solid tapered neck for maximum rigidity
• Ideal for contour machining of mold and die cavities
• 1°, 1.5°, 3°, 5°, and 7° neck angles to address common draft angles in molds
• 35° helix for increased cutting performance
• Latest generation AlTiN Nano coating offers superior hardness and heat resistance

7. Clearance Cutters - Square
Maximum Reach! Maximum Rigidity!
• Designed for deep cavity profiling
• 2° tapered neck design minimizes deflection and maximizes wall clearance
• Offered uncoated, AlTiN Nano coated
• h6 shank tolerance for shrink fit holders

8. Maximum Reach! Maximum Rigidity!
• Designed for deep cavity profiling
• 2° tapered neck design minimizes deflection and maximizes wall clearance
• Offered in uncoated, AlTiN Nano coated, and Amorphous Diamond
Clearance Cutters - Ball
New
Sizes

9. Clearance Cutter
Interference Depth

10. Where to find Mold Tool & Die
in Harvey Tool’s Fall 2016 Catalog