The document describes Medical Design, a company that manufactures and exports dental implants and orthodontic instruments. It lists over 30 orthodontic instruments that Medical Design produces, including pliers, cutters, band removers, and more. Contact and ordering information is provided at the end.

2. MEDICAL DESIGN®
( Worldwide Dental Health care Supporting Company )
• Medical Design is in the business of manufacturing and exporting Dental Implants
Instruments, Orthodontic Instruments. E. G Orthodontic Pliers, Orthodontic
instruments, Distal end cutter, ligature cutter, hard wire cutter, bird beak plier,
tweed plier, weingart plier, arch forming plier, T-plier, three prong plier, bracket
removing plier, step plier etc .
• Medical Design is a well reputed name, committed to this profession and can be
relied upon for its very fair dealings, the workmanship and the skill it has and at the
top the speedy and in time service it renders. We assure you that you shall never
regret having business relation with Medical Design.
• Official site Medical Design (Pakistan). Here you can order the whole range of
products and services or to find contact information.
http://www.medicaldesignpk.com
MEDICAL DESIGN
Address : Amir Street, Ali Ul Haq Road, Call / Whats app : 0092 345 6768889
Model Town Sialkot 51310 Pakistan Email : info@medicaldesignpk.com

3. T3-Jaw Plier
• Precision tips for accurate wire and clasp adjusting and
contouring
• Also excellent for bending of orthopedic appliances
• Box joint

4. Bird Beak Plier
• Versatile plier for orthodontic heavy wire bending
• Round and pyramid beaks are smooth to prevent wire
scoring
• Can also be used to form springs
• Tip sizes are .035” round and square

5. Arch Forming Plier (Angle)
• For bending, holding or torquing dimensional wires
• Stainless steel with hard carbide coated tip surfaces
• Box joint
• Offering maximum resistance against wear by torquing.

6. Cap Removal Plier
• This precision stainless steel instrument uses joint plier transfer to shear off convertible
caps effortlessly, and with one fluid motion
• The slender rail design allows doctors to easily access the buccal region with little obstruction
• The blade tips feature a filleted design allowing for an easy, low-force cap removal
• Can be used on any convertible buccal tubes as well as convertible brackets
• Each packaged instrument will include two replacement blades

7. Cinch Back Plier
• This plier is made with the optimum angle for working behind the buccal
tube
• Serrated tips are tapered to a fine point allowing
access to hard-to-reach areas

8. Closing Loop Plier
Nance:
• Extra hard stainless steel
• Four step loop forming beaks precision milled
• Radiused edges prevent wire damage
• Box joint
• Up to .028” (0.711mm) wire
Standard:
• Same use and same characteristics as the Nance, but permits
uniform vertical bendings
• Permits the simultaneous forming of two right angled bends
• Box joint
• Max wire .028” (0.711mm)

9. Contouring Plier
• For bands and anterior stainless steel crowns
• Stainless steel
• Box joint

10. Contouring Plier (Johnson)
• Concave and convex tips for contouring bands
• Stainless steel

11. Crimpable Hook Plier
• For attaching crimpable hooks securely to arch wires with
minimum

12. Direct Bond Remover – Angled
• Quickly and safely removes direct bond brackets.
• Angled precision edges allow for easy removal of brackets
and excess bonding.

13. Direct Bond Remover Straight
• Wedges between the base and the tooth surface and lifts
off with virtually no stress
• Precision diamond honed wedges work on all types of
brackets

14. Direct Bond Removing Plier
• Wedges between both edges of the base and the tooth surface and lifts off with
virtually no stress
• Grips firmly for occlusal-gingival or mesial-distal use
• Hard tool steel insert
• Available in a narrow & wide tip

15. Distal End Cutter Safety Hold
Distal End Cutter, Safety Hold
• Shear cuts hardwire and then safety holds the loose distal end to
prevent wire from going into tissue
• Hard tool steel insert
• Cut wire up to .021 x .025 (0.534mm x 0.635mm) and .026 (.66mm)
round
• Designed for intraoral cutting and lip safety
• Made from selected surgical stainless steel to provide lasting beauty
and durability
• Not recommended for braided wire

16. Flush Distal End Cutter with O-Ring
Flush Distal End Cutter with O-Ring
• Hardened insert
• Elastomeric o-ring
• Wire up to .022” x .028” (0.559mm x 0.711mm) and up to .026” (0.660mm) round
• Due to the o-ring, the cutting edges do not have direct contact which ensures longer
sharpness of the cutting edges

17. Distal End Cutter Flush V Design
• Assures arch wire is cut flush with the end of a tube
• Safety hold is ideal for intraoral cutting and lip safety
• Cuts Elgiloy, S.S. and Niti .016” (0.406mm) to .018” x
.022”
(0.457mm x 0.559mm)
• Braided Wire .0175” (0.445mm)
• Box Joint

18. Distal End Cutter Flush
• Assures arch wire is cut flush with the end of a tube
• Safety hold is ideal for intraoral cutting and lip safety
• Cuts Elgiloy, S.S. and Niti .014” (0.356mm) to .018” x
.022”
(0.457mm x 0.559mm)
• Braided Wire .0175” (0.445mm)
• Box Joint

19. Distal End Cutter (with Long Handle)
• Cuts and holds arch wire within .5mm of the buccal tube
• Long handle design allows better control behind second
molars, also results in less
force to cut

20. Hard Wire Cutter
• 15° cutting angle for easy intraoral access
• The extra strong edges make it one of the most popular
cutters
• Designed to cut all arch wires
• Capability of cutting ligatures at the tip

21. Hard Wire Cutter 2
Hard Wire Cutter 2
• Designed to cut all arch wires
• Capability of cutting ligatures at the tip

22. Heavy Wire Cutter
• Hard tool steel insert
• Cutting capacity up to .040” (1.016mm) in the rear area,
.024” (0.610mm) in front
• Hard tool steel inserts

23. How Plier Straight
• 2.5mm tips
• Matching serrated pads assure a firm, positive grip
• Rounded tips for patient comfort and safety

24. How Plier Curved
• Same as Straight Plier only with curved beaks
• Curved beaks increase efficiency in posterior area
• Box joint

25. How Plier Straight
• Extra hard stainless steel
• Good all around utility plier has long slender lip-safe beaks
• Tips are serrated and hard carbide coated for additional grip
• Lip-safe edges at box and beaks
• Tips are precisely adjusted
• Box joint

26. Ligature and Hard Wire Cutter
• Stainless steel
• Pliers are designed for cutting wires with minimum force
• Cuts to maximum of .022” x .028” (0.559mm x 0.711mm)
• Hard tool steel inserts

27. Ligature Cutter
• Stainless steel
• Soft ligature wire only – up to .020” (0.508mm)
• All edges of lock are lip safe for intraoral use
• Fine tips for easy intraoral access
• Pliers will cut wires up to the very tip
• Hard tool steel inserts diamond honed

28. Ligature Tying Plier
Ligature Tying Plier (Coon)
• Semi-automatic
• Locking channel is chamfered and burr-free to allow wire
to slide before locking without being cut
• Tips are thin allowing close contact to bracket
• Up to .012” (0.305mm) soft wire

29. Light Wire Plier
• Longer, more gradually tapered beaks than the Bird Beak
plier
• For working light round wires up to .020” (0.508mm)
• Longer beaks make it easier to bend small diameter loops
• Box joint

30. Light Wire Plier Extra Long
• Extra long, narrow beaks for precise bends
• Designed for working with small wires and forming wire
springs
• Tapered beaks make it easy to bend small diameter loops
• Tip sizes are .030” round and square

31. Lingual Arch Forming Plier
• Designed to form double back and triple back bends in either
.030” (0.762mm) or .036” (0.914mm) wire for inserting in
lingual sheaths
• Double back groove is close to the plier joint to assure
adequate forming
• Also recommended for use with 3D Fixed/Removable to hold
palatal activation appliances

32. Lingual Arch Forming Plier
• Plier makes consistent and repeatable bends
• Forms double-back and triple-back bends in .030” and
.036” wire for use with
lingual sheaths
• Jaws of the plier have four grooves placed and sized for all
different sized larger wires

33. Loop Forming and Closing Plier
Nance Style
• Precision loop forming with four-step tip
(3, 4, 5, and 6mm)
• Serrated tips prevent wire slippage

34. Loop Forming Plier
Optical Type
• Extra hard stainless steel
• Cone and concave beaks for round wires
• Concave beak is contoured to ensure more uniform loops
• Round beak is precision ground to .047” at tip
• For working round wires at tip up to .020” (0.508mm)

35. Loop Plier Tweed
• Extra hard stainless steel
• Tips precision milled
• Three step loop former .049” (1.25mm), .065” (1.65mm),
.085” (2.15mm)
• Grooved and serrated opposing tip for very small loops
• Up to .020″ (0.508mm) wire
• Non-removable tip

36. Loop Plier Tweed Extra Replacement Tip
• Includes one extra replacement tip
• Hard tool steel inserts
• Round beak is heat-treated. It has two sections of .047”
(1.2mm), .059” (1.5mm)
• Concave beak prevents wire nicking and ensures more
uniform loops; for making Omega loops
• Up to .020” (0.508mm) wire

37. Mini Pin and Ligature Cutter
Mini Pin and Ligature Cutter
• Fine tips to easily access hard-to-reach areas
• Cuts wire ligatures, pins, and elastics

38. Miniature Cutter
• Stainless steel
• Soft ligature wire only – up to .012” (0.305mm)
• Hard tool steel inserts diamond honed
• Lip safe

39. Modular Omega Plier
• For adjusting the expansion or contraction of the Omega
loop on the Bimetric Distalizing Arch
• Hook on round end to hold Omega loop

40. Pin and Ligature Cutter
Pin and Ligature Cutter
• Concave design front for maximum vision when cutting

41. Plier Weingart Style
• Tips are delicate and meet precisely so that even small
attachments can be firmly held
• General purpose utility plier with curved beaks
• Inserted tempered tips for longer life
• Serrated and lip safe
• Tip length 10mm
• Up to .020” (.508mm)

42. Plier Weingart Style-Mini
• Tips are delicate and meet precisely so that even small attachments
can be firmly held
• General purpose utility plier with curved beaks
• Inserted tempered tips for longer life
• Serrated and lip safe
• Tip length 6mm
• Up to .016″ (0.406mm)

43. Posterior Band Remover
Posterior Band Remover
Wedges under the band while the 5mm replaceable Teflon
bumper rests on the occlusal surface for easy band removal.

44. Posterior Band Removing Plier
• Long chisel tip with carbide insert
• Facilitates removal of posterior bands
• With replaceable occlusal nylon pads
• Stainless steel
• Will stay sharp

45. Rectangular Arch Bending Plier
Tweed Style
• Ideal for forming square and rectangular arch wires
• Thin jaws are parallel at .020” opening
• Forms offsets and 90° bends on all types of arch wire

46. Safety Hold Distal End Cutter
• Safety hold is ideal for cutting wires within the patient’s mouth
• Plier shear-cuts and holds arch wire within .5mm of the buccal tube

47. Step Plier
• Step plier is equipped with a double-sided offset beak for
bayonet-style step bend
• Creates right hand or left hand step-up or step-downs

48. Three Jaw Clasp Adjusting Plier
Aderer Type
• Tips for rounded or dimensional wire up to .040” (1.016mm)
• Box joint
• Exact shape and position of beaks will avoid squeezing and
marking
of wire
• Made from extra hard stainless steel

49. Wire Contouring Plier
Smooth, non-grooved surface, with chamfered forming
surfaces for stress-free bending.

50. V-Bend Plier
• Special design makes 1mm “V” bends to shorten arch
wires or provide a positive stop
• Excellent for placing stops in nickel-titanium wires

51. Wire Bending Plier
Angle / Bird Beak Type
• Extra hard steel
• Tips meet very precisely
• Cone and pyramid shaped tips
• Carbide coated tips for better grip of wire and longer lifetime
• Round beak is precision ground to .039” (1.0mm) at tip
• Bends wire up to .022” x .025” (0.559mm x 0.635mm) and round up
to .028” (0.711mm)

52. Marshon Band Pusher
• Serrated stainless steel tip, non-removable
• Stainless steel handle – square with chamfered corners
• Tip end has square serrations

53. Band Seating and Removing Instruments
Manufactured from High Quality Medical Grade Stainless Steel
Precision Performance for Versatility
Full Autoclavable / Reusable
Manufactured for Optimum Performance and Longevity

54. Band Seater with tin insert
Fully autoclavable, Sterilizable and corrosion resistance
Tempered and hardened for a longer life
Handcrafted to precise specifications

55. Band Adapter/Seater
Fully autoclavable, Sterilizable and corrosion resistance
Tempered and hardened for a longer life
Handcrafted to precise specifications
Surgical Dental Instruments

56. Bracket Placing Tweezer
Easy release of both metal and plastic direct bond brackets
Fits narrow to wide twin
Manufactured from High Quality Medical Grade Stainless Steel
Full Autoclavable / Reusable

57. Orthodontic Mathieu Ligating Pliers
Ergonomic design provides consistent feel from one instrument to the next
Durable construction
Precise tolerances for accurate control at all times
High corrosion resistance without chrome plating - no risk of plating peeling off
Easy instrument care - all standard sterilization procedures are applicable

58. Bracket Positioning Star Boone & Height Gauge
Passivated Steel to prevent Corrosion
Fully autoclavable and Sterilizable
Tempered and hardened for a longer life
Handcrafted to precise specifications
Orthodontic Dental Instruments

59. Masquito Plier
Developed for ease and assurance in placing of elastic ligatures.
Precision tips and locking handles provide a positive, non-slip grip.