1. FG-1625/1625T
GLASSBREAK DETECTOR
The FG-1625 Glassbreak Detector uses the latest settings can compensate for the acoustics of any room.
technology to provide faster response and increased false Optimum operation can be quickly verified using the
alarm immunity. The FG-1625 is specifically designed to FG-701 Glassbreak Simulator.
allow fast, easy installation, while the adjustable sensitivity
FEATURES
• FlexCore™ Signal Processor • Selectable Sensitivity • Multiple Domain Signal Analysis
The FlexCore Signal Processor is Two DIP switches on the FG-1625 The FG-1625 performs Multiple
an Application-Specific Integrated make it easy to set the sensitivity to Domain Signal Analysis in which
Circuit (ASIC), which processes match the acoustics of the room. time, frequency and amplitude
sound data in parallel rather than Four different sensitivity levels are characteristics are evaluated for
sequentially for faster, more available, ranging from very low to signal qualification. This enables
accurate detection decisions. The high. The range can then be the detector to accurately
combination of proven FlexGuard ®
verified remotely with the FlexGuard discriminate false alarms from
performance with the speed of FG-701 Glassbreak Simulator. true glassbreak events.
FlexCore processing provides
• Mount the Detector Anywhere • Enclosed PC Board
unmatched false alarm immunity
Mounts on any wall, in the window The PCB is protected from potential
without compromising detection.
frame, or on the ceiling, with no damage during installation.
• Easy Installation and Setup minimum range and a maximum
• Patented Remote Test Mode
Honeywell’s patented technology range of 25' (7.6m) to the glass.
The Patented Remote Test Mode
allows remote activation of Test
• Covers All Glass Types can enabled or disable the
Mode (with simulator). The FG-1625
The FG-1625 works on all glass indicator LEDs using the FG-701
has a centered wire entry hole, 45°
types, including plate, tempered, Glassbreak Simulator. The unit
terminal blocks and EOL terminals.
laminated, wired, film-coated and automatically resets from Test
A hand-clap feature verifies that the
sealed insulating glass. Mode in five minutes.
detector is functioning.
• Mounting Locations
The FG-1625 can be mounted on
the ceiling, opposite wall, adjoining
wall or the same wall as the glass.

2. FG-1625/1625T
GLASSBREAK DETECTOR
SPECIFICATIONS
Physical Dimensions Power Requirements 1 Protected only if both plates of the unit
are broken.
• White high impact ABS plastic • 6 - 18VDC, 12mA typical at 2 Coated glass with security films, including films
housing 12VDC; 22mA max (Latched LED) for solar protection, up to 12mil. thick may be
• 3 7/8" H x 2 2/5" W x 7/8" D • AC ripple: 4V peak-to-peak at used. Film Technologies International, Inc.’s
GLASS-GUARD® GGLL 1200 has been
(98mm x 62mm x 21.8mm) nominal 12VDC evaluated with this product by Underwriters
Laboratories, Inc.
Weight RFI Immunity
3 In compliance with Underwriters Laboratories
• Product Only: 3.2oz (90g) • 30V/m, 10MHz - 1000MHz of Canada’s Standard for Intrusion Detection
• Pkgd Product: 4.1oz (116g) Units (CAN/ULC-S306-M89):
Operating Temperature a. Plate glass 3mm to 10mm can be used.
Range • 14° to 122° F (-10° to 50° C) b. ULC recognizes a maximum range for
protecting sealed insulated glass and
• 25' (7.6m) maximum, • Storage: -4° to 122° F (-20° to 50° C) coated glass of 12.5ft. (3.8m).
omnidirectional. Range is
Approvals and Listings
adjustable; no minimum range Note: The FG-1625/1625T detects
• FCC and IC verified
Alarm Relay • CE shattering of framed glass by direct
• FG-1625: Form A, 125mA max, • C-Tick impact. It may not consistently detect
25VDC max • UL Listed breakage by blows that only crack
• FG-1625T: Form C, 125mA max, • ULC Listed the glass, by high velocity projectiles
25VDC max such as bullets, or glass broken
Glass Type/Thickness without an impact.
Tamper Switch (FG-1625T only)
Type* Minimum Maximum
Accessories Description
• Combination cover/wall tamper
25mA max, 24VDC max Plate 3a 2.4mm (3/32") 10mm (3/8") • FG-701 P/N 0-000-701-0
Tempered 3mm (1/8") 10mm (3/8") Glassbreak Simulator
Alarm Duration Laminated 3mm (1/8") 14mm (9/16")
FlexGuard® Glassbreak
• Five seconds (unaffected by alarm Wired 6mm (1/4") 6mm (1/4")
Simulator/Tester
LED latching) Coated 2,3b 3mm (1/8") 6.4mm (1/4")
Sealed 3mm (1/8") 6mm (1/4") • The sound of breaking glass is
ESD Immunity digitally simulated by the FG-701.
Insulating 1,3b (Maximum overall 7/16")
• 10kV discharges of either polarity The FG-701 is compatible for
to exposed surfaces * Minimum size for all types is 28cm (11") square; testing all Honeywell glassbreak
glass must be framed in the wall or mounted in detectors. Honeywell highly
a barrier at least 0.9m (36") wide.
recommends testing glassbreak
detectors before final installation.
ORDERING
FG-1625 Glassbreak Detector
FG-1625T Glassbreak Detector with Tamper
Honeywell Security & Custom Electronics
Honeywell International Inc.
PO Box 9035
Syosset, NY 11791 L/FG1625/D
January 2007
www.honeywell.com © 2007 Honeywell International Inc.