1. FG-730
GLASSBREAK DETECTOR
Honeywell’s FlexGuard® FG-730 incorporates the most reliable, field-proven technology available – setting the industry standard in
glassbreak detectors.
FEATURES
• Field Proven Design • Broad Range • Alarm Memory
The world’s best selling Detects glass breakage from Alarm LED can be set to latch upon
glassbreak detector. distances up to 30' (9 m). alarm; helps identify which unit alarmed
The FlexGuard FG-730 detector in multiple detector applications.
• Dual Technology
sets the industry standard in
Flex-Audio Principle • RFI Immunity
glassbreak detectors.
Positively detects and confirms 100 watts at 3m (10') from all
breaking glass by analyzing both • Dual Flex/Audio Technology mobile bands 27–1000 MHz.
“flex” (impact) and “audio” (shattering) Provides excellent catch performance
• Easy Installation and Set-Up
frequencies. For an alarm to occur while virtually eliminating false alarms.
Mount within 9m (30') of the glass to
the flex signal must be followed by
• Indicator LEDs be protected. (Can be adjusted to suit
an audio signal within a prescribed
LED alarm indicator for testing flex characteristics of each location.)
time frame.
and audio technologies.
• Low Voltage Operation
• Signal Verification
• Burst Rejection Circuit 10–14VDC
Both flex and audio signals must
Ignores short flex/audio noise burst
register valid amplitude, duration and • Low Current Draw
signals present in some environments.
frequency for an alarm to occur. 25mA at 12VDC
• Circuit Protection
• Signal Filtering
Prevents shorts, overloads and
Thorough filtering and processing of
reverse-polarity connections from
all signals provides greater immunity
causing damage.
to false alarms.

2. FG-730
GLASSBREAK DETECTOR
SPECIFICATIONS
• Physical Dimensions • Power Requirements Type* Minimum Maximum
White, high impact, ABS 10–14VDC 25mA at 12VDC
Plate 2.4 mm (3/32") 6.4 mm (1/4")
plastic housing:
• Operating Temperature Tempered 3.2 mm (1/8") 6.4 mm (1/4")
10 cm H x 6.2 cm W x 2 cm D
0°–49° C (32°–120° F) Laminated* 3.2 mm (1/8") 14.3 mm (9/16")
(3-7/8" x 2-2/5" x 4/5")
• Set-Up Tester Wired 6.4 mm (1/4") 6.4 mm (1/4")
• Weight
FG-701 Glassbreak Simulator Coated** 3.2 mm (1/8") 6.4 mm (1/4")
85 g (3 oz)
Also works with FG-700 Sealed
3.2 mm (1/8") 6.4 mm (1/4")
Insulating*
• Range Glassbreak Simulator
9 m (30')
• Approvals and Listings * Laminated and sealed insulating
• Mounting Locations – UL Listed glass types are protected only if
Ceiling, opposite wall, adjoining wall, both plates of glass are broken.
• Glass Type/Thickness
same wall as glass
Minimum size for all glass types is
** For glass coated on the inner
• Alarm Relay 11" x 11" (28 cm x 28 cm) square;
surface with 3M Scotchtint™
Form C, 500mA max, 30VDC max glass must be framed in the wall of
type RE35NEARL or Hardglass
the room or mounted in a barrier of
• Tamper Switch Security Film, reduce maximum
36" (.9 m) minimum width.
Form A (NC) 50mA, 30VDC effective range to 15’ (4.6 m).
ORDERING
FG-730 Glassbreak Detector
FG-701 Glassbreak Simulator/Tester
Honeywell Security & Custom Electronics
Honeywell
2 Corporate Center Drive
Melville, NY 11747 L/FG730/D
June 2007
www.honeywell.com © 2007 Honeywell International Inc.