1. FG1625RFM
ROUND FLUSH MOUNT GLASSBREAK DETECTOR
The FG1625RFM Glassbreak Detector uses field proven the adjustable sensitivity settings can compensate for the
FlexGuard® technology to provide faster response and acoustics of any room. Optimum operation can be quickly
increased false alarm immunity. The FG1625RFM is verified using the FG701 Glassbreak Simulator.
specifically designed to allow a fast, easy installation, while
FEATURES
• FlexCore™ Signal Processor • Selectable Sensitivity • Multiple Domain Signal Analysis
The FlexCore Signal Processor is Two DIP switches on the The FG1625RFM performs Multiple
an Application-Specific Integrated FG1625RFM make it easy to set Domain Signal Analysis
Circuit (ASIC), which processes the sensitivity to match the in which time, frequency and
sound data in parallel rather acoustics of the room. Four amplitude characteristics are
than sequentially for faster, more different sensitivity levels are evaluated for signal qualification.
accurate detection decisions. The available, ranging from very low This enables the detector to
combination of proven FlexGuard® to high. The range can then be accurately discriminate false alarms
performance with the speed of verified remotely with the FlexGuard from true glassbreak events.
FlexCore processing provides FG701 Glassbreak Simulator.
• Patented Remote Test Mode
unmatched false alarm immunity
• Mount the Detector Anywhere The Patented Remote Test Mode
without compromising detection.
Flush mounts in any wall, or in the can enable or disable the indicator
• Easy Installation and Setup ceiling, with no minimum range and LEDs using the FG701 Glassbreak
Honeywell’s patented technology a maximum range of 25' (7.6 m) to Simulator. The unit automatically
allows remote activation of the glass. resets from Test Mode in five
Test Mode (with simulator). The minutes.
• Covers All Glass Types
FG1625RFM recesses in a 1.0"
The FG1625RFM works on • Mounting Locations
(26mm) diameter hole through
all glass types, including plate, The FG1625RFM can be flush
a false ceiling or sheetrock. A
tempered, laminated, wired, film- mounted in the ceiling, opposite
hand-clap feature verifies that
coated, and sealed insulating glass. wall, adjoining wall, or the same
the detector is functioning.
wall as the glass through a 1"
diameter hole.

2. FG1625RFM
ROUND FLUSH MOUNT GLASSBREAK DETECTOR
SPECIFICATIONS
• Physical Dimensions: • Operating Temperature: a. Plate glass 3mm to 10mm
- Small Front Cover: 1.8" (45mm) - 14° to 122° F (-10° to 50° C) can be used.
diameter - Storage: -4° to 122° F (-20° to 50° C)
b. ULC recognizes a maximum
- Large Front Cover: 2.5" (63.5mm) • Glass Type/Thickness:
range for protecting sealed
diameter
Type Minimum Maximum insulated glass and coated
- Wall Sleeve: For installation in 1.0"
Plate 3a 2.4 mm (3/32") 10 mm (3/8")
glass of 12.5 ft. (3.8 m)
(25mm) hole. Maximum depth,
Tempered 3 mm (1/8") 10 mm (3/8")
without wire 2.6" (66mm) Laminated 3 mm (1/8") 14 mm (9/16") Note: The FG-1608 detects the
Wired 6 mm (1/4") 6 mm (1/4") shattering of framed glass by direct
• Weight:
Coated 2,3b 3 mm (1/8") 6.4 mm (1/4")
- Product Only: 0.96 oz (27.2g) Sealed 3 mm (1/8") 6 mm (1/4") impact. It may not consistently detect
Insulating 1,3b (Maximum overall 7/16") breakage by blows that only crack
Pkgd Product: 1.90 oz (54g)
• Range: Minimum size for all types is 28 cm the glass, by high velocity projectiles
- 25' (7.6 m) maximum, (11") square; glass must be framed in such as bullets, or glass broken
omnidirectional. Range is the wall or mounted in a barrier at least without impact.
adjustable; no minimum range 0.9 m (36") wide. • Accessories/Description:
• Alarm Relay: - FG701 P/N 0-000-701-0
1. Protected only if both plates of the
- FG-1625: Form A, 90mA max, Glassbreak Simulator
unit are broken.
16VDC max • FlexGuard® Glassbreak
• Alarm Duration: 2. Coated glass with security films, Simulator/Tester:
- Five seconds (unaffected by alarm including films for solar protection, - The sound of breaking glass is
LED latching) up to 12 mil. thick may be used. digitally simulated by the FG701.
• ESD Immunity: Film Technologies International, Inc.’s The FG701 is compatible for testing
- 10kV discharges of either polarity GLASS-GARD® GGLL 1200 has all Honeywell brand glassbreak
to exposed surfaces been evaluated with this product detectors. Honeywell highly
• Power Requirements: by Underwriters Laboratories, Inc. recommends testing glassbreak
- 8 - 16VDC, 5mA typical at 12VDC; at the request of Honeywell. detectors before final installation.
12mA max (Latched LED)
3. In compliance with Underwriters
- AC ripple: 4V peak to peak at
Laboratories of Canada’s Standard
the normal 12VDC
for Intrusion Detection Units
- RFI Immunity
(CAN/ULC-S306-M89):
30V/m, 10 MHz -1000 MHz
ORDERING
FG1625RFM Round Flush Mount Glassbreak Detector
FG701 Glassbreak Simulator
Honeywell Security & Communications
Honeywell
2 Corporate Center Dr. Suite 100
P.O. Box 9040
Melville, NY 11747 L/FG1625RFM/D
July 2008
www.honeywell.com © 2008 Honeywell International Inc.