This presentation is about CINT Alarm systems. There are two types of alarm systems : Fire Alarm & Intruder Alarm.

1. www.cint.co.in www.cint.us

2. CINT Alarm System
Fire Alarm Panel
Heat Detectors
Optical Smoke Detector
Intruder Alarm
•CINT/AX-0/130/2007N
•CINT/04SEC-AS
•CINT/SG-16AS

3. CINT- Fire Alarm Panel
The Oriel series of Microprocessor based fire alarm panels are an upgraded version which provides a reliable and cost
effective solutions to fire detection, from small to large size installations which have 4, 6, 8 & could go up to 60 zones of
selecting models and features. These units have been designed to offer high standards of performance, reliability and
quality and comply with IS 2189: 1999 and tested by the ERTL (N) & System Sensor. The Oriel series panels are specially.
BASIC FEATURE
 Easy Installation
 Easy Operation
 Easy Maintenance
•Complies to IS 2189: 1999 and Tested by ERTL (N). and System Sensor.
•2X16 character backlit LCD display. (4 x 20 character, optional)
•64 /128 / 256 / 512 Events logging facility with real time clock and
keypad.
•2 wire Communication facility via RS 485 Port. (For Repeater Panel)
•Computer attachment with Printer Facility (Via RS 232 Port)
•BMS attachment.
•Lamp test feature.
•Complete with integral power supply and battery charger for sealed
lead acid battery.
PRODUCT FEATURES

4. Our AD-912 series detectors meet the requirements of UL 268 and EN 54-7/5 for use
in fire alarm signaling system. They are intended for use in 2-wire/4 wire Class A or B
supervised zone circuits. The AD-912 Series detectors are subject to panel
compatibility limits and compliance with corresponding NFPA 72E standards, local
codes, and ordinances. The conventional AD-912 series of Heat detectors were
designed with precise CPU control and thermistor detection. Its state of the art
combination of “Rate of Rise” and “Fixed Temperature” ensures the best quality of heat
detection in all environments.
All of our AD333 series detectors meet the requirements of UL 268 and EN 54-715
for use in Fire Alarm signaling systems. They are intended for use in 2 wirel4 wire
Class A or B supervised zone circuits. The AD 333 Series detectors are subject to
panel compatibility limits and compliance with corresponding NFPA 72E standards,
local codes, and ordinances. AD-333 series include 2 wire and 4 wire detectors,
which provide fast and reliable response to photoelectric smoke and heat (135°F)
detection. While the smoke and heat detection circuits operate independently, their
outputs being "OR" connected. The detector provide the fire detection performance
by acting as a smoke sensor and or a 135°F heat detector at the same location.
Heat Detector UL Certified
Optical Smoke Detector UL Certified

5. Intruder Alarm
CINT/AX-0/130/2007N
CINT/04SEC-AS
CINT/SG-16AS

6. CINT/AX-0/130/2007N
PREMIUM BASIC
AX-TN series is a compact designed photoelectric detector with IP65 high
durability rating and accurate optical alignment performance.
These features drastically reduces false alarms caused by severe outdoor
environmental changes and it provides a wide range of applications.
IP65 structure with high sealing rubber packing
Rubber packing is used for all conceivable points where water or
dust may penetrate, such as wiring holes, wire ports and the
outer chassis. Prevention from dust, bugs and water delivers
performance with higher reliability against false alarms and
breakdowns.
Lightning protection
An improved Electro-Magnetic Interference surge absorber and high surge resistive relay has been installed to protect from
lightning surges and maintain stable operation.
Anti-frost hood cover
A hood is installed to prevent frost forming on lower beams. It also makes the maintenance easy because the surface of cover is flat.
Easy angle adjustment
It allows the installer to finely adjust the beam easily.
High grade spherical lens
The high grade spherical lens creates more sharply defined and precise infrared beams compared to ordinary fresnel lenses.
9% beam blocking stability
Enables stable operation with as much as 99% loss of beam energy caused by heavy rain, dust storms, fog or snow.
A.G.C. (Automatic Gain Control) Circuit
A.G.C. circuit continually monitors for gradual changes in the signal’s strength caused by changing weather conditions. It adjusts the
sensitivity accordingly to maintain the proper signal level for the current environmental conditions.
Adjustable beam interruption period
The beam interruption time can be adjusted to fit any application. For example, when protecting a wall or fence, a longer
interruption time will catch intruders.

7. Model : AX-70TN AX-130TN AX-200TN
Maximum detection
range
20m (70ft) 40m (130ft) 60m (200ft)
Maximum arrival
distance
200m (700ft) 400m (1300ft) 600m (2000ft)
Detection method
Infrared beam
interruption detection
Infrared beam
interruption detection
Infrared beam
interruption detection
Interruption period
Selectable between 50,
100, 250, 500msec (four
steps)
Selectable between 50,
100, 250, 500msec (four
steps)
Selectable between 50,
100, 250, 500msec (four
steps)
Power supply 10.5 – 28V DC 10.5 – 28V DC 10.5 – 28V DC
Current Consumption 38mA max. 41 mA max. 45mA max.
Alarm period 2sec (±1) Nomina 2sec (±1) Nomina 2sec (±1) Nomina
Alarm output N.C. 28V DC, 0.2A max. N.C. 28V DC, 0.2A max. N.C. 28V DC, 0.2A max.
Tamper switch
N.C.; open when cover is
removed
28V DC, 0.2A max. 28V DC, 0.2A max.
Operating temperature
-35°C – +60°C (-31 °F –
+140°F)
-35°C – +60°C (-31 °F –
+140°F)
-35°C – +60°C (-31 °F –
+140°F)
Environment humidity 95% max. 95% max. 95% max.
Alignment angle
± 90° Horizontal, ± 5°
Vertical
± 90° Horizontal, ± 5°
Vertical
± 90° Horizontal, ± 5°
Vertical
Location of installation
Indoor / Outdoor : Wall /
Pole Mounting
Indoor / Outdoor : Wall /
Pole Mounting
Indoor / Outdoor : Wall /
Pole Mounting
Weight (Transmitter+
Receiver)
650g (22.9oz) 650g (22.9oz) 650g (22.9oz)

8. FEATURE
•Micro-controller based
•4 zone control panel
•On board key pad
•Two fully programmable codes (master and servant codes)
•20000 code combinations
•One delay zone, one immediate zones, one 24 hour panic
zone, one 24 hour fire zone
•Built in battery backup provision
•Zone omitting facility 9 led display
•5 leds indicate operational status
•4 leds indicate individual zone status
•Entry or exit time 2 to 255 seconds
•Sounder time 2 to 20 minutes
•Silent arming
•Night mode arming
•Intrusion log
•Dedicated panic and quick arm keys
•Power failure indication
•Blown fuse indication
•Non-volatile memory
•16 key backlit keypad
•Bell and strobe light outputs
•Open zone indication
•Zone status led indicators
•Automatic rearming after an intrusion
•Only three incorrect attempts allowed to disarm the system
after which the system goes into alarm state Musical audio
indication
•Multiple sounder outputs
•Elegant white abs body
CINT/04SEC-AS
Built in Speech Dialer
•Micro-controller based
•2 messages
•Separate intrusion message
•Separate fire message
•15 telephone numbers for intrusion message
•15 telephone numbers for fire message
•20 second recording time for each message
•Operates with both tone & pulse
•Message playback
•Telephone number check
•Non-volatile memory
•Power status led
•Dialing status led
•Silent Dialing
•Can work on EPABX line
•Self test on reset
•Line overriding
•Sound precision switch
•Musical audio indication
•In-built tamper switch

9. Electrical
•Quiescent current 75 mA typical
•current with dialing & message play: 160 mA
•Maximum sounder 1 current output: 1A
•Maximum sounder 2 current output: 1A
•Sounder saturation Voltage: Less than l Vat lA
•Remote keypads: Up to five
•Non-volatile Memory: Programming and Log
•Zone response time: Less than 500ms
•Zone Loop Resistance: Less than 5kohm for
NORMALLY CLOSED
TECHNICAL SPECIFICATIONS
Environmental
•Operating Temperature: 0°C to 45°C
•Storage Temperature: -20°C to 60°C
•Maximum humidity: 95% non-condensing
•Environment residential / commercial / light Industrial
•Physical
•Dimensions: 236mm x 226mm x 80mm
•Max Battery Dimensions: 150mm x 110mm x 64mm
Power Supply
•Mains supply Voltage:220+10%-15%50Hz
•Total current Output: 800mA at 220V AC (Fuse JA20mm
On Main Card)
•Regulation: Less than 9%
•Ripple: Less than 200mV RMS
•Battery Voltage: 12V DC
•Battery type: SMF Rechargeable
•Battery Recharge Voltage: 13.8V +/-0-2V DC
•Fuse: 250ma 20mm AC Mains on PS Card

10. Electrical
•Quiescent current :30 mA Max.
•Quiescent current with backlit LCD: 90 mAMax.
•MAIN CONTROLSTATION WITH ONE REMOTE KEY PAD
•Quiescent current: 300 mA
•Quiescent current with backlit LCD: 360 mA
•Current with dialing: 530 mA Max.
•Maximum sounder 1 current output :1A
•Maximum sounder 2 current output: 1A
•Remote key pads: Upto three
•Non-volatile Memory: Programming and Log
•Zone response time: <500ms
•Zone Loop Resistance: <5k ohm for NORMALLY CLOSED
Physical
•REMOTE KEY PAD
•Dimensions: 150mm x 121mm x 33mm
Main Control station
•Dimensions: 258mm x 230mm x 76mm
•Max Battery Dimensions: 150mm x 110mm x 64mm
Environmental
•Operating Temperature: 0°C to 45°C
•Storage Temperature: -20°C to 60°C
•Maximum humidity: 95% non-condensing
•Environment residential / commercial / light Industrial
GSM
•GSM Frequency: Dual Band 900MHz/ 1800 MHZ
CINT/SG-16AS
Power Supply
•Mains supply Voltage: 220+10%-15% 50Hz
•Total current Output: 2A at 220V AC or 4A at 220V AC
•BatteryVoltage:12VDC
•Battery type: SMF Rechargeable
•Battery Recharge Voltage: 13.8V+/-0.2V DC
•Operating Temperature: OC to 45C
•Storage Temperature: -20C to 60C
•Maximum humidity: 95% non-condensing
•Environment: residential / commercial / light Industrial