CV Muhammad Afi Hassan 2015

RESUME MUHAMMAD AFI BIN HASSAN
1
MUHAMMAD AFI BIN HASSAN
No 14, Jalan Asli 8,
Taman Pasir Putih,
81700 Pasir Gudang.
Johor Darul Ta’azim
Email :muhdafi_88@yahoo.com
OBJECTIVE
A mechanical position with diploma in Mechanical Engineering in Manufacturing. As a
QC Inspector to make quality is the BEST in the part of your live!. And to gain more
experience and learn a new skills.
PERSONAL PARTICULARS
Gender : Male
I/C No : 880910-23-5617
Date of birth : 10 September 1988
Age : 27 years old
Place of birthday : Hospital Sultanah Aminah Johor Bharu
Marital Status : Married
Health : Good Health
Nationality : Malaysia
Interest : Adventure Game
Phone : 017-7685696
EDUCATION
1) Jan 2006 - Dis 2009
Politeknik Johor Bahru, Diploma in Mechanical Engineering
Pasir Gudang, Johor (Manufacturing).
2) 2004 – 2005
Sek. Men. Teknik Muar, Grade in Sijil Pelajaran Malaysia
Muar,Johor (SPM).

2
ATTENDED COURSE
1) June 2012
Johor Skill Development Center Welding Inspector (CSWIP 3.1)
(PUSPATRI)
2) April 2010
Johor Skill Development Center Welding Inspector (PCN Level 2)
(PUSPATRI)
WORK EXPERIENCE
1) Company Name : Flextronics (Penang) Sdn Bhd
Position Title : QA Asst Engineer (Assembly)
Industry : Manufacturing
Date Joined : June 2014 ~ Present
DUTIES AND RESPONSIBILITIES
• To ensure and monitor Qc Inspector (IPQC & OQA) carry out activity during and
after assembly
• Ensure production follow spec as a client requirement
• Prepare release package for each new model including result for each testing.
• Prepare checklist for Qc Inspector (IPQC & OQA) for their inspections referenced.
• Prepare QSI (Quality Standard Inspection) for each models including Sub-Assembly
and Main Assembly.
• Ensure incoming part in spec and no reject issues (painting and molding)
• Prepare Quality Alert for reference Trainer and Production especially operator to
follow the sequence that Engineer Process provided.
• Ensure jig or tools for testing are in good condition and inspect as follow
requirement from client.
• Prepare documentation for all finding either from client or internal and come out
with a methods.
• Ensure zero market claims.

3
2) Company Name : Seagull Engineering Sdn Bhd.
Position Title : QA/QC Inspector (WELDING)
Industry : Oil & Gas Fabrication
Date Joined : August 2010 ~ Febuary 2014
DUTIES AND RESPONSIBILITIES
• To carry out all QC Inspection in welding activities as directed by QC Head or
Manager in accordance with company’s QA/QC procedures.
• To carry out all inspection receiving material before production.
• To ensure and monitor welding activity during fabrication and visual after welding.
• To ensure and follow up the welding sequence.
• To perform all QC/Welding inspection of the works at site / shop as required.
• To coordinate with NDT team or subcontractor to perform NDT timely and as per
specification.
• To ensure that all fabrications work are performed to the quality as per specification.
• To ensure that all QC activities are performed timely with no delay to production.
• To perform any other duties that may be assigned to you by your superior /
management from time to time.
JOB RESPONSIBILITIES ( IN SEQUENCE )
• To interpreted fabrication drawing. (G.A., nozzle, internal, external detail).
• Perform material receiving inspection such as plate, flanges, forging, fitting, pipe,
tube sheet (heat exchanger), baffle plate (heat exchanger).
• Ensure all the material appearance such as width, length, thickness, stamping @
marking and heat number are available and comply with drawing
• Prepare line summary check list such as marking date, fit up inspection, visual after
welding date and clarify the joint number in order to monitor the progress in
workshop.
• Perform fit up inspection during pre-fabrication especially for longitude seam,
circumference seam, flange to nozzle neck joint, pipe joint, nozzle to shell and
attachment to pressure part joint. Ensure the alignment (hi-low), bevel preparation
and gap as per drawing fabrication.
• Monitor welding activity during fabrication and make sure all the document is
available and approved such as WPS and weld map before start the inspection.
• To monitor welding process such as SMAW, GTAW, FCAW, SAW and control the
welder, To ensure that only qualified welder to perform welding work during
production activity.
• Perform visual inspection after completed weld. Ensure that the reinforcement weld
is achieved as per fabrication drawing. Also determine defect such as spatter,
undercut, under fill and mark clearly so that remedial action can be taken.
• Coordinate with NDT department to perform examination such as PT, MT, and RT
after welding completed and visual inspection satisfactory. In accordance to ITP to
ensure the examination had performed to the specified joint.
• To understand the method of NDT and make sure it is done correctly.
• Review the NDT report and ensure it is tally with request and compile to the MDR.

4
• Perform final inspection and final dimensional as a final inspection for QC inspector
before proceed to PWHT or hydrostatic test.
• To coordinate with:
• QA engineer (in order to implement all the related procedures).
• Design Engineer (Technical wise, drawing).
• Production (material, schedule).
• Purchasing (mill certificate, P.O and D.O).
PROJECT INVOLVED
1. Year : September 2013 to Febuary 2014
Job Number : 7.13M004
Client : TNB / Andritz / MMHE-ATB
Project Involved : Ulu Jelai Hydroelectric (Steel Liner) Project
Project in MMHE-ATB Snd Bhd
2. Year : August 2013 to December 2013
Job Number : 7.13S002
Client : PETRONAS / PROCESS GROUP / MMHE-ATB
Project Involved : Petronas Skid Piping FLNG Project
A-42-101- Producer Water Treatment Package
A-42-102- Desanding Package
3. Year : April 2013 to December 2013
Job Number : 7.12S052
Client : PETRONAS / MHI / MMHE-ATB
Project Involved : Sabah Ammonia Urea (SAMUR) Project
C-58-41- Demi Waste Water Stripping Tower
4. Year : December 2012 to December 2013
C-20-01- HP Scubber
C-20-02- LP Scubber
C-20-04- Stripper
C-21-01- Process Condensate
C-37-01- Stripping Tower

5
5. Year : December 2012 to December 2013
V-16-02- Syn 2nd
Intercooler Separator
V-16-03- Syn Gas After Separator
V-18-01- Ammonia Separator
V-18-04- Purge Gas Separator
6. Year : June 2012 to December 2012
Job Number : 7.12M039Q
Client : PETROFAC / MMHE-ATB
Project Involved : Cendor Phase 2 – FPSO Project for PETROFAC
V4101-Hot Oil Expansion Vessel
V4102-Hot Oil Drain Down Vessel
V4301-Fuel Gas Discharge Scrubber
A2001/2002-V01- 1st stage Suction Scrubber Train 1
A2001/2002-V02- 2nd stage Suction Scrubber Train 2
7. Year : July 2012 to November 2012
Job Number : 7.11M035L
E1001-Inlet Heater
E1002-Interstage Heater
8. Year : Sept 2012 to November 2012
Job Number : 7.12M041S
LP FWS Pig Receiver – 4 set
(V1004, V1005, V1006 & V1007)
9. Year : July 2012 to October 2012
Job Number : 7.12S042T
81-V5505- DryAir Receiver

6
10. Year : March2012 to July 2012
Job Number : 7.11S032I
Client : EXXON / MMHE-ATB
Project Involved : TAPIS EOR and Rejuvenation Project &
TELOK GAS Development Project.
Launcher & Receiver
(V370, V371, V372, V373, V374, V375, V376, V377,
V378, V382)
Project in MMHE-ATB Snd Bhd=
11. Year : February 2012 to June 2012
Job Number : 7.11M030G
Project Involved : Block PM304 Cendor Phase-2 Development Project for
PETROFAC ( Vessel )
V1001- HP Production Separator
V1002- LP Production Separator
V3101-Crude Degasser
V4601-HP Flare Knock-out Drum
V4701-LP Flare Knock-out Drum
Project in MMHE-ATB Sdn Bhd
12. Year : August 2010 to February 2012
Job Number : 7.10M023Z
Project Involved : Tocoma Water Gate
CTA-2002, 2003, 2004, 2008
CMA-2001, 2002, 2003, 2004, 2005
Project in MMHE-ATB Sdn Bhd
13. Year : March 2011 to July 2011
Job Number : 7.10M026C
Project Involved : Spillway Radial Gate
30062-D-0704, 0705, 0706_rb1, 0708, 0709, 0721
Project in MMHE-ATB Sdn Bhd.
14. Year : November 2010 to March 2011
Job Number : 7.10S025B / S.10S025B
Project Involved : Theun Hinboun Expansion Project ( Steel Liner )
30062-D-1503, 1518, 1519, 1520, 1521, 1522, 1604, 1609
Project in MMHE-ATB Sdn Bhd.

7
OTHER SKILL
 Proficient in computer Microsoft Word, Power Point and Excel.
 Familiar in AutoCAD drawing.
 Proficient in engineering mechanical.
 Knowledge in welding and welding procedure
 Knowledge in Visual Inspection and type of defects
 Basic knowledge in NDT
 Full clean driving licence (B2 & D)
 Ability to handle all inspection material like Welding Gauge, Thickness Gauge
(UT), Clamp Meter, Laser Distance and Hi-Low Gauge
PERSONEL CHARACTERISTIC
 High social engineering skill; able to deal with various levels of people.
 Adaptable to new environment in a short period of time and are able to work extra time
when necessary.
 Dedicated work ethic – flexible in schedule – goal oriented – self-guided.
 Have the flexibility of either working indoor or outdoor (out station when required).
 Work effectively, independently or as a part of a team.
LANGUAGE PROFICIENCY
SPOKEN
1. Language : Malay Overall : Excellent
2. Language : English Overall : Intermediate
WRITTEN
1. Language : Malay Overall : Excellent
2. Language : English Overall : Intermediate
REFERENCE
 Mr. Mohd Abdul Gani Bin Harun
Coordinator QC Inspector SEAGULL ENGINEERING Sdn. Bhd.
Tel : 016-7828468
 Mr. Md Najib HJ. Razali
QA/QC Inspector SAPURA KENCANA PETROLEUM
Tel : 019-6088478
 Mr. Wan Haziman
NDT Inspector MMHE-ATB Sdn. Bhd.
Tel : 017-6850150

8

9

10

11

12

13

CV Muhammad Afi Hassan 2015

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (20)

Similar to CV Muhammad Afi Hassan 2015

Similar to CV Muhammad Afi Hassan 2015 (20)

CV Muhammad Afi Hassan 2015