Abdul Halim Sadikun has over 15 years of experience in quality assurance roles in various industries including oil and gas, power plants, and steel construction. He holds a Diploma in Welding Technology and certifications in magnetic particle testing and dye penetrant testing. His most recent role was as a Quality Representative at RINA Inspection Services where he performed inspections, witnessed tests, and reviewed documentation. He is seeking a quality role where he can utilize his inspection, auditing, and project coordination skills.
1. Abdul Halim Sadikun
No.13 Lorong IM8/34, Taman Mahkota Putra, Bandar IM, 25200 Kuantan, Pahang, Malaysia.
+6019-7511451
NRIC: 760725-01-7363 / abdulhalim.sadikun@gmail.com
❶ Education:
UNIKL-MFI - Diploma in Welding Technology -2000
Kerian Vocational Secondary School Perak - MLVK Intermediate Level (Arc Welding) -1996
Batu Pahat Vocational School- SPMV / MLVK Certificate Basic Level (Arc Welding) -1993
❷ Certification:
Magnetic Particle Test Level II (Certificate No:IEIS-MT-150912)
Dye Penetrant Test Level II (Certificate No: IEIS-PT-150901)
❸ Career Objective:
An experienced professional Quality Representative & Project Expeditor with more than 15 years’ experience in in Oil
and Gas (Upstream and Down Stream) Power Plant, Shipping Construction, Mechanical Equipment and Steel Construction
Heavy Industry.
Seeking for a position such as Quality Coordinator, Quality Inspector, Project Expeditor, Quality Manager or any
position that is suitable with my working experience and my academic qualification where I can excel, deliver and
achieve mypotential.
❹ Employment History:
1. RINA Inspection Services - (July 2015 -Present)
Position: Quality Representative / Expeditor
Witness or monitor on-site welding procedure qualification testing and/or welder performance qualification testing.
Review and become familiar with Contractor / Sub-Contractor NDE procedures and NDE Personnel Qualifications
End User verification of every witness and Hold Point.
To attend Final Inspection, Witness Hydrostatic Test, Function Test (FAT) as per NOI from RINA.
Witnessed the Hydro Testing for Body, seat Leak test, Functional Test refer to approved project procedures/manufacture
recommended procedure.
Visual Inspection such as painting condition (visual and DFT check), parts installation as per Drawing and Specification
Sheet, Painting, Packing and review the related document as per client request
Review all Mill certs, NDE report, Dimensional Inspection, HT, Blasting Painting activity, MDRetc.
Witnessing incoming Material inspection to ensure that all incoming materials are as per project requirement and meet
specification.
Monitor and/or witness Post Weld Heat Treatment. Review heat treatment charts and documentation.
Monitor and/or witness hydrostatic or pneumatic pressure testing. Review pressure test charts and documentation.
Witnessed FAT for various sizes of control valves.
Perform activity stipulated in the Inspection Test Plan for various equipment, Pressure Vessel, Boiler, Steam Heaters, Con-
trol Valve, Choke Valve, Plates for rolling etc.
2. Laing O’Rourke Australia - (July 2014 - Apr 2015)
Position: Quality Coordinator
Ensure adherence to all relevant construction drawings, applicable specifications, work codes and safety manual.
Oversee/Assist QC Inspectors in the execution of their duties Plan daily site inspection schedule, Report and monitor QC
inspectors to project quality manager. Report on QC Inspector review preliminary WPS, conduct welding procedural test
qualification, compile test reports, and check correctness of updated WPS/PQR/WQ Register. Impart QC Knowledge to QC
Inspectors.
Update and maintain NCR program
Monitor implementation of approved procedures on the shop floor. Perform inspection and verity correctness of results.
Monitor and assess production/contractor’s workmanshipquality.
Ensure all inspection requirements are completed prior to issue/signing of release note for production or contractors.
Ensure all Advice Notes/Non-Conformances are reported and recorded to facilitate correctiveactions
Ensure all welding/inspection equipment is within calibrationrequirements.
Liaise with Dimension Controller & Inspection Data in-put
Sign off Inspection release Notice asrequired
2. 3. Krohne (M) Sdn. Bhd. - (Nov 2013 - Sept 2013)
Position: Quality Inspector / Expeditor
To perform an expediting activity right from Material, consumables, manpower loading and fabrication activity .
Review and become familiar with Contractor / Sub-Contractor Welding Procedure Specifications (WPS), WeldingQualifica-
tion Records (PQR), Weld Maps, and Welder Performance QualificationRecords.
Witness or monitor on-site welding procedure qualification testing and/or welder performance qualification testing.
Witness and/or monitor Positive Material Identification of piping components and completed weld deposits.
Monitor and/or witness in-process NDE such as liquid penetrant examination, magnetic particle examination, hardness
testing, Positive Material Identification, etc.
4. Black & Veatch Thailand - (Dec 2012 - Sept 2013)
Position: Quality Inspector / Project Expeditor
To perform an expediting activity right from Material, consumables, manpower loading and fabrication activity.
To ensure the most important item which is delivery date shall be met as percontract.
To generate weekly Shop Expediting Report and submit them to the top of client’s representative.
To ensure rectification is done based on the approved Drawing and Technical Specification.
To assist vendor to speed up their fabrication to meet the deliveryschedule.
Surveillance to ensure correct application of NDT on both Structural and Piping. Review of NDT reports and radiographs.
5. VOGT Power US - (Mac 2012 - Sept 2012)
Position: Quality Inspector / Project Expeditor
To perform an expediting activity and to assist vendor to speed up their fabrication to meet the delivery schedule.
Review all Mill certs, NDE report, Dimensional Inspection, HT, Blasting Painting activity, MDRetc.
Witnessing incoming material inspection to ensure that all incoming materials are as per project requirement and meet
specification.
Witnessing marking and cutting activities to ensure all joint preparation according to the specification and requirements.
Material planning with production and other related parties in order to minimizepending/delay.
Ensure all equipments and tools sent to calibrated and valid during fabrication.
6. Moody International (M) (Seconded to Fluor Daniel (M) Sdn. Bhd.) - (Sept 2011 - Feb2012)
Position: Project Expeditor
Liaise with Engineering, Procurement, QA/QC, PMT , Production discussing delivery issue on weekly basis .
To ensure the most important item which is delivery date shall be met as percontract.
To ensure rectification is done based on the approved Drawing and Technical Specification.
To generate flash report on every items so that the fabrication of the items can be tracked correctly
7. Bumi Armada Bhd. - (Mac 2012 - Sept 2012)
Position: QAQC Inspector / Expeditor
Monitoring Daily Inspection activities as per approved ITP and QualityPlan.
Attend every PIM for every new project priorexecution.
Perform the Inspection as per WITP approved by Bumi Armada
To monitor equipment installation, visual Inspection, witnessed the Hydro Testing & FAT after final inspection.
8. NEM BV Holland - (June 2008 - Dec 2010)
Position: QAQC Engineer / Expeditor
Witnessed every Inspection done by contractor. Submit Weekly Inspection/Progress Report to HQ in Holland as a KPI
To review RT, MT, PT Hardness Report, PMI report dimensional Reportetc.
Familiarize IKZ, AMSE and other related technical specification fromclient.
9. Malaysia Marine & Heavy Engineering - (Apr 2006 - Apr 2008)
Position: QA Lead Piping & Mechanical
Involve directly developing a Quality Plan for Gumusut Kakap FPS Project base on the project requirement.
Develop all related procedure required for Gumusut Kakap FPS Project .
3. 10.Mentrade Marine & Equipments (M) Sdn. Bhd. - (May 2004 - Apr2006)
Position: QA Manager
To delegates the new project to the assistant Engineer
To conduct the inspection by the external body such as BVQI, ABS, NKK, LRS andetc.
Take overall responsibility for the proper and timely continued maintenance of the company's properties.
Participate in the internal audit as an auditor and auditee.
11.MHE Demag South (M) Sdn. Bhd. - (May 2002 - Mac 2004)
Position: QA Head / Production Engineer
Estimate production hours required for the job base on the previous standard records.
To Coordinate with the project department and Engineering department and externalparty
Ensure the releasing & administrate the production orders subsequent confirmation of activities and closing the job timely.
12.KNM Steel (M) Sdn. Bhd. - (Jan 2001 - Jan 2002)
Position: QC Inspector
To assist QA Engineer Conduct internal audits inter disciplines..
To ensure that the drawing, procedure and technical specification are up to date and latest revision to be utilized.
To conduct WQT to the new welders in variousprocesses.
❺ Training or Seminar Attended:
Internal Auditor QMS 9001:2000 Brain Elite Consultancy.
Radio graphic Interpreter attendance by TWI
SAP management System at MHE Demag.
Magnetic Particle Test Level II (Certificate No:IEIS-MT-150912)
Dye Penetrant Test Level II (Certificate No: IEIS-PT-150901)
❻ Skills & Proficiencies:
Computer Skills:
Microsoft Office Suite
SAP System
Language Skills:
Good command of English and Bahasa Malaysia.
Technical Skills:
Inspection equipments: Welding gauge, DFTgauge,
Tapper gauge & HT equipments
Technical Drawing Interpretation
Client Technical Specification/Client Code/ITP/Project
Requirement
Experience in all kind mechanical staticequipments
Welding Technology and Inspection.
Blasting & Painting
Experience in overhead crane & material handling equip-
ments
Auditing Skills.
Other Skills:
Ability to manage multiple projects simultaneously and underpressure.
Demonstrated ability to work with and support cross-functional projectteams
Goal-driven leader who maintains a productive climate and confidently motivates, mobilizes and coaches direct workers to
meet high performance standards.
Experience in various level of Quality, QA/QC Engineer, QA Engineer, Quality Lead, Quality Coordinator, Project Expeditor,
Quality Inspector, Internal Auditor, Project Engineer, Production Head andetc
❼ Job Preferences:
Current Salary: USD 350 per-day / Expectation: (Open for Nego) / Date of availability - After 1st December 2016
❽ References:
Rudyy Alfans Subakti - Site Quality Manager - Laing O’Rourke Australia - Tel:+6281317421567
Alan Fletcher - Regional QC Manager - Laing O’Rourke, Australia - Tel: +61407660866