Resume for Project & Engineering Manager

1. J. CALVIN JAMERSON, P.E.
Jamerson Project Services
10818 Elmdale Drive
Houston, Texas 77070
(281) 415-0529 cell
calvinj1960@gmail.com
PROFESSIONAL EXPERIENCE:
08/2013 to GULF PROCESS GASES, LLC, Houston, TX
06/2015
Engineering & Project Manager
• Generated project P&IDs from PFDs. Reviewed project PFDs, and P&ID's for
equipment, piping and instrumentation accuracy.
• Generated equipment specification sheets, and reviewed those created by
others, based upon Process Engineer's and/or customer's information: natural
gas fired reformer, deaerator, pressure vessels, heat exchangers, Hydrogen
membrane filtration, pressure swing absorption (PSA) process, Fischer-
Tropsch Reactor, distillation column, cooling water tower, pumps, compressors,
and instrumentation.
• Selected proposed vendors for equipment and sent RFQs for quotations.
• Created and co-signed purchase orders. Managed to save company
approximately $300,000. Saved company approximately $500,000 in new
contract negotiations.
• Created part number system for use in future parts ordering and inventory
implementation.
• Created major equipment tracking sheet, expedited vendor submittal drawings
and equipment delivery.
• Critiqued received vendor documents for accuracy to specs sheets, customer
requirements, and codes ASME Section VIII and B31.3.
• Generated document Management of Change (MOC).
• Experience with equipment: gas fired heaters, BMS skids, chemical
separation process towers, heat exchangers, ASME pressure vessels,
pumps, and Fischer-Tropsch.
• Walked down equipment per piping and instrumentation diagrams for
conformance to design.
09/2011 to OPTIMIZED PROCESS DESIGNS LLC, Katy, TX
08/2013
Project Manager
• Supported Senior Project Manager in multi-million dollar projects.
• Reviewed project PFDs and P&ID's for equipment, piping and instrumentation
accuracy.
• Generated equipment specification sheets based upon Process Engineer's
information.
• Created major equipment tracking sheet, expedited vendor submittal drawings
and equipment delivery.
• Critiqued received vendor documents for accuracy to specs sheets, customer
requirements, and codes ASME Section VIII and B31.3.
Page 1 of 2

2. J. CALVIN JAMERSON, P.E.
Jamerson Project Services
• Experience with equipment: gas fired heaters, BMS skids, NH3 injection skid
for NOX control, chemical separation process towers, heat exchangers, ASME
pressure vessels, cooling water towers.
• Walked down equipment, piping and instrumentation on-site for conformance
to design.
• Participated in Project Hazards Analysis “PHA”.
09/1999 to GLEX, INC., Houston, TX
08/2011
Senior Engineer (April 2009 to August 2011)
• Reviewed customer project specifications and P&IDs for manufactured
projects.
• Identified key specification requirements for project major equipment,
structure, piping, and electrical.
• Reviewed customer specifications to determine impact on project
design, fabrication, and cost.
• Quoted project to customer.
General Manager (June 2008 to April 2009)
• Supervision of shop personnel added.
• Technical staff increased to 6.
Engineering Manager (Sept 1999 to June 2008)
• Managed skid mounted process equipment projects from customer
order to equipment shipment, with backlog up to 14 projects.
• Prepared project quotations and negotiated customer contracts.
• Worked with P&IDs, PFDs, industry specifications, and project
specifications.
• Direct communications with customer during course of projects.
• Purchased major equipment for projects.
• Knowledge of ASME Section VIII, Chinese License, & B31.3.
• Direct supervision of 3 technical staff.
• Supervised preparation of drawings and other engineering functions.
• Managed contract engineering and outsourcing functions.
EDUCATION:
MBA - Finance, Texas Tech University, Lubbock, Texas.
BS - Mechanical Engineering, Texas Tech University, Lubbock, Texas.
ANCILLARY:
Computer: Windows 7, MS Excel/Word/Outlook/Project, PVElite, ShareFile,
DropBox, Smartsheet
Registered Professional Engineer – Texas (70591)
ASME Section VIII Division 1, B31.3
Industrial Safety Training Council - Basic Plus
Page 2 of 2