Senior Mechanical Engineer

1. DEEPAK M ARU
4438 Candlewick Cir Columbus, Oh 43230  614.448.7088  deepakmaru58@gmail.com
US Citizen
PROFESSIONAL PROFILE
 Expertise with 20 years of experience in the aerospace industry, oil and gas industries.
 Adept experience in project management experience including hands on experience with product life cycle
development.
 Extensive hydraulic and airframe structures experience in development, design, analysis and installation of
aircraft.
PROFESSIONAL ACCOMPLISHMENTS
 Project’s P & ID Piping Design per ASME B31.3,
B31.4, B31.8, B16.34, B16.5, 8, NACE, API, and
ASME Section VIII.
 Planning, scheduling, & process the project
 Manpower, costing, & estimated time
 Risk & implemented projects
 Fluid/Hydraulic/Pneumatic systems
 CATIA V5, R21 (20,000 Hours)
 Auxiliary Power Units & Engine Build Ups
 Auxiliary Power Units
 Electronic packaging
 PDM, Smart Team
 Cost analysis
 Actuator & solenoid valve design in
Aerospace & Oil /Gas Industry
 Autodesk inventor & stimulation
 Creo- 2, Pro-E (10,000 hours) & Wind-chill
PROFESSIONAL EXPERIENCE
Carlisle IT/Aerotek Franklin, Wisconsin 3/2016 - 11/2016
Mechanical Project Engineer
 Supported planning of customer requirements according to product developments.
 Used CATIA V5, R21 and Creo-2 for detailed design, installations and kit’s airbus aircraft.
 Developed design and writing certification reports to support master data list, structure substantiate
analysis, lightning strikes, weight and balanced reports.
GE Healthcare/Birlasoft Waukesha, Wisconsin 9/2015 - 03/2016
Senior Mechanical Engineer
 Designed, analyzed and created models of new Alpha and Beta MRI Machines for productions with heat
deception analysis of power distribution cabinets and rearranged the modules.
 Re-aligned the module sufficient air circulation, design including redesign new support, or modifying
existing support.
 Prototyped component supports build up and installed in prototype cabinet design. After installation with
all support through the cabinet with cable installation.
Parker Hydraulic Filter Division Metamora, Ohio 9/2014 - 6/2015
Senior Mechanical Engineer
 Designed, analyzed and created models of new product of F-16 Coolant Filter as well as Oil Filter of
military aircraft in aerospace filter products.
 Created project to facilitate product design completion specifications with analysis report of new product
with materials, design, manufacturing and prototype build-ups and cost.
UTC/LNT Rockford, Illinois 6/2014 - 9/2014
Senior Mechanical Engineer
 Developed, designed and selected components using CATIA V5, R21 needed to test bed calibration.
Performed the calibration and performance of hydraulic test bed for EMU generator test.

2.  Calculated overall cost of hydraulic test Bed EMU generator.
Komatsu North America Peoria, Illinois 11/2013 - 4/2014
Senior Mechanical Engineer/Project Engineer
 Designed, analyzed and created models of new product hoist cylinder analysis using Pro-E CAD tools
and wind-chill processes.
 Communicated on a weekly basis with the brakes system supplier and tested new brakes component,
brake’s caliper and pads to meet ISO 3456 specifications.
 Determined the root cause of U50 existing combo valve problem and advised suppliers to change design
of Combo valve with new material specification.
 Communicated on a weekly basis with the brakes system supplier and tested new brakes component,
brake’s caliper and pad to meet ISO 3456 specification.
Gulfstream Aerospace Co. Savannah, Georgia 5/2011 - 2/2013
Technical Specialist II (Contract)
 Designed and developed various mechanical systems such as landing gear, hydraulic systems, brakes
systems, ECS system of business jet aircraft using CATIA V5 and Smart Team Process. Supported all
phases of design review.
 Determined the root cause of U50 existing combo valve problem and advised supplier to change design
of Combo valve with new material specification.
Rolls Royce Energy System Mount Vernon, Ohio 8/2008 - 01/2011
Mechanical Engineer Specialist
 Managed various customers’ solution business projects.
 Developed top-level requirements definition, requirements flow-down, requirements decomposition,
technical risk identification and requirements verification and validation.
 Designed, analyzed, installed and tested solenoids operate valves for High.
 Executed design changes of power generation and mechanical applications consistent with the customer’s
specifications.
 Analyzed and designed process gas piping, for the Anti surge valve, solenoid control and engineering data
to determine feasibility of product proposals.
 Orchestrated, analyzed and designed process gas piping, for the Anti surge valve, solenoid control purge
valve, vent valve, and pressure safety valve using ASME VIII Div. 1 & 2, & specification B16.44, B31.5,
B31.6, and B31.8, NACE.
Textron Aviation Wichita, Kansas 8/1995 - 06/2008
Mechanical Engineer Specialist
 Designed and developed various mechanically controlled valves and manifolds of hydraulic systems
(landing gear, hydraulic systems, Solenoid operated parking brake valves, antiskid valve, brake metering
brake systems, ECS system etc.) of business jet aircraft.
 Prepared mechanized system requirement documentation as per FAA regulations. compliance reports and
test plans for FAA certification.
 Designed 3D models and assemblies in CATIA V5, V4 CAD software. Prepared detailed designs including
tolerances, clearance analysis and material specifications.
 Manage the hydraulic system schematic diagram per system modification of Citation Sovereign, CJ3, CJ4,
and Mustang projects.
EDUCATION/CERTIFICATIONS/AWARDS
 B.S. Mechanical Engineering – VJTI, Matunga, Mumbai, India July 16, 1986
 M.S. Mechanical Engineering – Wichita State University, Kansas – 21 Credit Hours Completed
Additional Training:
 FAA 21 & FAR 21 & 25 at Wichita FAA training center, Wichita, June 1998
 Hydraulic Engineering Training at Vickers Hydraulic Engineering School, Mumbai, India June
1989