1. REY CATANE PUROL
BLK. 8 LOT 13, LAS CASAS ELENA BAAN 3, BUTUAN CITY, PHILPPINES
MOBILE: +639095775870 Roaming #:+639216943460
Mobile in abroad: +261338389715
Email add: rey_purol@yahoo.com
POSITION:
Instrument Supervisor Commissioning/Construction
OBJECTIVES:
To seek and obtain a challenging and rewarding position in the field of instrumentation and electrical which
satisfying my career, that will not allow to evince my abilities more fully, but will also enable to expand my
knowledge expertise and experiences that providing effective and efficient tools in facing different types of works
that acquires mental and physical job competence. Show my potential ability and capability which fit my qualification
as well.
EXPERIENCE CLASSIFICATION
Instrument Technician - 3 Years
Instrument foreman - 3 Years
Commissioning - 2 Years
QA/QC Inspector - 1 Year
INDUSTRY
Oil Rig - 1 Year
Oil and Gas - 2 Years
Mining - 4.7 Years
SUMMARY:
With my more than 6 years of experience in the Instrumentation Discipline I can successfully perform the
following activities:
 Site & Field Engineering
 Construction Field Supervision and Management of Multi-nationals
 Loop Testing, Pre-commissioning, Commissioning and Start-up
 Factory Acceptance Tests
 Inspections, Tests, Setting, Calibration and Tuning.
 Service, Maintenance and Shutdowns
 QA/QC inspection
 DCS Boardman
 Read and Interpret all forms of Engineering Documentation related to Instrumentation
 Good Mechanical aptitude
Professional Experience:
September 2015-present Sr.Instrument Commissioning /Maintenance Technician
(HPAL/Mix sulphide and refinery)
Ambatovy - Nickel, Cobalt mining, processing and refinery
Ambatovy - Sherritt
Toamasina, Dynatic Madagascar-S.A
March 2012- September 2015 Sr.Instrument Commissioning /Maintenance Technician
(HPAL/Mix sulphide and refinery)
Ambatovy - Nickel, Cobalt mining, processing and refinery
(Sub-con., Kentz Co.,Ltd.-Member SNC-LAVALIN group)
Toamasina, Dynatic Madagascar-S.A

2. Duties and Responsibilities:
 Plan, coordinate with the Instrument Technicians and Contractor craftsmen t o perform all Instruments with
other Sections and Operations in prioritizing, planning, scheduling in all related activities complying with all
HSE & PTW requirement.
 Monitors and ensures compliance with HSE policies and procedures. Active participant and champion of
behavior based safety within the area of responsibility. Ensuring that instrumentation and control systems
on facilities are operated in a safe and environmentally sound manner to comply with all applicable local
laws and regulations in accordance with company guidelines and policies.
 Demonstrate a positive attitude and willingness to the work to any client charter values.
Foster good relationships and team working ethic with national teams to promote safe working practices
and efficiency. Shaw a commitment to the team by coaching and training the National personnel as
directed line to the client.
 To develop and recommend innovative systems/procedures that contributes to improve the reliability,
availability and integrity of the plant and to the Nationals.
 Insuring to co-ordinate with “DCS” control operator, to perform live trouble shooting in the field for
corrective and preventive maintenance activities and conforming safety awareness.
 To organize and directs daily work for Instrument Technicians. Includes carrying out routine, planned
preventative maintenance and breakdown work on all instrumentation equipment by ensuring that tools,
equipment and suitable Technicians are available to carry out the work in a safe and cost effective manner.
 Analyzes equipment failures and prepare reports regarding findings and causes of failures.
 Develops action plans for remediation of instrument and control system failures, and follow up on
implementation of arrange actions.
 Coordinates in scheduling of major maintenance and shutdown activities or other technical operating
programs.
 To perform troubleshooting in the field in all instrument related, level, pressure, temperature, flow,
pneumatic valves, hydraulic valves, MOV, and control valves. As per operation related work request and
complying with safety measures.
 Perform modification of control circuits and/or control loops as per the plant change requests and
update all related plant drawings to reflect the actual changes.
 Valve servicing and overhauling.
REASON FOR LEAVING – PROJECT COMPLETE, END OF CONTRACT
May 21, ’11 – March 30,’12 Instrument Technician Commissioning /QA/QC Inspector
SNC-LAVALIN (supplied Kentz Co., Ltd.)
Ambatovy Project - Nickel, Cobalt mining processing and Refinery
Toamasina, Dynatic Madagascar-SARL
QA/QC scope of work
 Coordinate with the client representatives to ensure that inspection are carried out expediently,
 Generate client requests for Inspection(RFI) were required providing sufficient notice for hold, Witness and
inspection,
 Continually carry out surveillance on the project recording and documenting any and all deviations from the
project quality program and the Company Management System,
 Responsible to review the calibration status of any test equipment being utilized on the project ensuring the
equipment is within calibration prior to use,
 To review the comment design data for instrument prepared by vendor engineering company, i.e., P&ID
against the specification, and redline drawings.
 Generate punch list items for the work deviation against standard installation practice,
 To carry out RFI request from the construction, to inspect instruments installation and termination as per
ILD required as par as follows and all defects to be recorded on punch list,
 Review cable and ground measurement test data for the basis of acceptance.
 Monitor daily disciplined activities and verifies compliances to project procedures specifications and
standard, identity quality problems. Reject non-conforming items and initiate, recommend or provide
solutions to the problems with customer
 Sanction, appointments through designated channels
REASON FOR LEAVING – PROJECT COMPLETE, END OF CONTRACT

3. Dec. 11, 2010 - Jan. 06, 2011 E&I Sr. Foreman (kentech)
Instrument Inspector utilized - QA/QC
OIL RIG (DELBA-III) RIG III TDS2500
Semi-submersible – Oil and Gas (platform offshore)
SBM – SINGLE BOUY MOORING (Sub-con. Kentech Co.,Ltd.)
IMAC Shipyard, Abu Dhabi, UAE
Duties and Responsibilities
Coordinate with the client representatives to ensure that inspection are carried out expediently,
inspection cables specification in accordance to the clients, inspection instrument of its proper usage, do punch
listing, RFI,ITP,7Q’s, loop checking are perform in appropriately, calibration of instruments, acceptance test and
functional of instruments, valve calibration (like; PSV. PCV, PRV, pneumatic valve and control valve and perform all
related instrumentation activities.
REASON FOR LEAVING – PROJECT COMPLETE, END OF CONTRACT
Jan. 18, 2010 – Dec. 10, 2010 E&I Foreman (kentech)
OIL RIG NORBE- IV (ODEBRETCH) RIG II TDS2000
Semi-submersible – Oil and Gas (platform offshore)
SBM – SINGLE BUOY MOORING (Sub-con. Kentech Co.,Ltd.)
IMAC Shipyard, Abu Dhabi, UAE
Construction:
Instrumentation:
Work activities involving calibration, installation, testing of valves, hydraulic valves,
MOV and Pneumatic valve, flow, temperature, pressure and level instruments, pressure differential gauges, level
gauge and transmitters control valves, shutdown valves, safety relief valves, pressure control valve, fire and gas
suppression equipment, fabrication and installation of cable tray/ladder and runner. Pre-commissioning activities such
as preparation of checklist, loop folder, loop checking, interlock checking, reading P&ID and hook up drawings,
inspection impulse tubing, leak testing and adaptation of engineering techniques procedures and specifications.
Electrical:
Work activities involving installation and testing of minor electrical equipment,
lighting fixtures and low power system, navigation lights, Search lights, fog horn, charger/uninterruptible power
supply system, PAGA system. Pre-commissioning activities such as: ductor/torque test on bus bar joints, meager test
on power circuits, and continuity test on control circuits, verifying equipment mounting, tagging & cleanliness,
relay/breaker settings, tightness of all electrical connections, terminations and cable, inspection of Cables, Cable
trays, Panel Boards, Switches, Connectors, drawing code standards and client specifications.
REASON FOR LEAVING – PROJECT COMPLETE, END OF CONTRACT
Oct. 2008 – Oct. 2009 Instrumentation Foreman (kentech)
On Steam tracing
CNL/CCS EGTL Module Project
EGTL-KBR, Chevron Oil and Gas Project
GPC- Mussafah Yard, Abu Dhabi, UAE
Work activities involving fabrication and installation of bear tube/insulated tube and pipe line heat tracing. Do leak
testing from manifold to condensate header…
REASON FOR LEAVING – PROJECT COMPLETE, END OF CONTRACT

4. TRAININGS/CERTIFICATES:
Undergone training in Atex and environment training of its application
(PCA - Ambatovy training center), toamasina, Dynatic Madagascar-SARL
Undergone training in Permit receiver, Permit coordinator, Permit user and preparer
St Paul University, Tamatave, Madagascar – S.A
Undergone training in Robert Expert Actuator (REXA – Megapack, xpack) hydrualic valve
(PCA - Ambatovy training center), toamasina, Dynatic Madagascar-SARL
Undergone training in Rigging Management and application
(PCA - Ambatovy training center), toamasina, Dynatic Madagascar-SARL
Undergone training in Swagelok tube fitting installation training seminar
(Conducted by Swagelok representative)
(Central Maintenance-Ambatovy), toamasina, Dynatic Madagascar-SARL
Undergone training in Swagelok tube fitting installation, and Safety Seminar
(Conducted by Creximco) KENTECH HALL – GPC, Mussafah, Abu Dhabi.UAE
Undergone training in Fire Extinguisher and Fire Fighting Safety Drill training and Seminar
GPC Field, Mussafah Industrial City, Abu Dhabi, UAE
Undergone training in Basic Safety Training Course (survival at sea)
The Maritime Training Center of the Philippine
Undergone training in PLUMBING (TESDA) Padada, Davao del sur, Philippine
Field Instrument and Control System Exposure:
 Differential Pressure Transmitter: ABB, Rosemount, Yokogawa, Foxboro, and Honeywell
 Level Transmitter: Rosemount. ABB, and Honeywell, Endress and Hauser
 Flow Transmitter: Yokogawa, Rosemount, Honeywell, Endress and Hauser.
 Temperature Transmitter: thermocouple type(K/ J)Rosemount RTD
 Hart Communicator 375 and 475, ABB Communicator 619 HT, Druck DPI 620, Druck Hand Pump,
Temperature Calibrator (712 RTD Calibrator & 714 Thermocouple Calibrator)
 Pressure Gauges: Ashcroft, Wika
 Control Valves: Fisher Controls, Valtek Flow Serve, Neles Controls, slurry flow
 Distributed Control System (DCS) – TDC 3000 Honeywell and Honeywell GUS Display
 Triconex and Siemens S7
 Valves exposure: delta valve. Moagas. Clarkson, elomatic, bêtes, shafer hydraulic valves, Rexa actuator
caldera valves. And any several of valves related.
EDUCATION:
Mindanao State University, Philippines (MSU) ELECTRICAL ENGINEERING TECHNOLOGY (completed)
Mindanao State University, Philippines (MSU) Bachelor of Science in Agriculture (completed)