1. Abdelfattah Mustafa Odeh, PMP, PEj, BSc Detailed Experience
Page 1 of 10
Date July 2012 to October 2016 Company QPM
Role Sr. Highway Engineer (Client Representative) Client Qatari Diar /LREDC
Project: Seconded Staff to LREDC – Lusail Design Department – Senior Highway Engineer
Project Description LREDC is Lusail Real Estate Development company which is responsible to build and deliver Lusail City including all the infrastructure related to design and
construction in coordination with all local Authorities.
The Road networks consist of many category of roads which varies from expressway to local roads and pedestrian network. Many types of intersections and
interchanges and dealing with many packages with different consultants and contractors.
Duty 1. Review the Highway design drawings, reports and specifications submitted by the Design Consultant at each Design Stage to ensure completeness,
and compliance with the approved Scope of Work.
2. Assess and seek clarification on constructability during early Design stages.
3. Review in a timely manner the Design Consultant(s) submittals and return comments.
4. Ensure the Design Consultant(s) incorporates the comments raised from previous stages.
5. Attend Technical meetings with the Client, PM, Design, other Sub-Consultants and Contractors.
6. Coordinate with PM’s to ensure that all documents are properly controlled.
7. Review alternatives to the Design concept submitted by the Design Consultant(s).
8. Review the change requests/variations.
9. Review completeness of Tender Documents, ensuring full compliance with Employer Requirements prior to issue.
10. Participate in the pre-qualification exercise of the construction contractors.
11. Participate in response to bidders clarifications and attend Technical Meetings along with PM and Design Consultants bidders during Tender stage.
12. Review tenders; participate in tender assessments and award of contract Post Contract.
13. Participate as required in technical workshops along with PM, Design Consultants and Contractors, ensuring continued compliance with ER’s
14. Participate as required with post contract site meetings.
15. Review/recommend changes to ER’s.
Date February 2005 to July 2012 Company Parsons International Limited
Role Key Performance Indicator controller & Highway Engineer Client Public Works Authority
Project: General Engineering Contract Area-4 Doha South
Project Description Parsons was awarded the Area of South Doha which consist of wide area of roads networks with different ROW. The status of each area also varies from
recently built to old areas that needs new roads or maintenance of the existing roads.
Duty As a KPI Controller:
1. Establish, update, maintain and monitor the Project Key Performance Indicator (KPI) and performance management system in co-ordination with the
PMC KPI Manager.
As a design team member (Highway Engineer),
2. Prepare designs drawings, specifications and relevant Contract documentation for the construction of the works to be extended
3. During construction to respond to requests for information,
4. Process change proposals,
5. Prepare the Drawings and reports related to highway geometric design for all stages ( Concept, Preliminary, Detailed and Tender. ) which include:
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
6. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,

2. Abdelfattah Mustafa Odeh, PMP, PEj, BSc Detailed Experience
Page 2 of 10
7. Land acquisition Drawings to be provided
8. Coordination with the geotechnical and Topographical surveyors.
9. Coordinate with other department for the interface areas.
10. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
11. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
12. Check and prepare the drawings related to Construction staging of the project
Role Deputy Project Manager/ Highway Design Leader Engineer Client Qatar Museum Authority (QMA) / Ateliers Jean Nouvel
Project: Peripheral Roads for New Qatar National Museum,
Project Description Design built project: Local roads surrounding the new museum in addition to 2 roundabouts and many junctions that connect the local distributor road with the
adjacent existing roads. The project is to prepare the drawings from Concept Design to IFC drawings and obtain all the authority approvals to allow the
contractor to build these roads.
Duty As a DPM,
1. Assist the PM for managing the project to be finalized on schedule
2. Coordinate with all stakeholders including MMUP, Ashghal, ASTAD and other Authorities.
3. Follow up to obtain related approvals.
4. Coordinate with all disciplines internally to make sure the deliverables are ready and as expected by the client.
5. Attend all the meetings related to the project internally and externally and prepare all minutes of meetings and progress reports.
6. Prepare the tender documents and assist at Tendering period
As a Highway Design Leader Engineer,
1. Manage a team of Seniors and juniors engineers and CAD Draftsmen to finalize the Drawings and reports related to highway geometric design for all
stages:
a. Concept, b. Preliminary, c. Detailed and d. Tender.
which include
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Review Pavement calculations based on AASHTO and QHDM,
3. Coordinate with other department for the interface areas.
4. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
5. Coordination with the geotechnical and Topographical surveyors.
6. Review all the quantities to finalize the BOQ document and prepare the project specifications.
7. Check and prepare the drawings related to Construction staging of the project
8. Review all the Land acquisition Drawings
Role Deputy Project Manager / Highway Design Leader Engineer Client Qatar Government / BOTC Contracting Company
Project: State Mosque Access Roads,
Project Description The government of Qatar has awarded BOTC the design-build contract for the access roads for the $115 million State Mosque. This landmark mosque is located
on a 43-acre plot with a capacity of about 11,000 persons. Parsons’ scope of the design services includes the complete design of the access roads surrounding
this new mosque including geometry, traffic, signing, pavement marking, drainage and street lighting.
Duty As a DPM,
1. Assist the PM for managing the project to be finalized on schedule
2. Coordinate with all stakeholders.

3. Abdelfattah Mustafa Odeh, PMP, PEj, BSc Detailed Experience
Page 3 of 10
3. Follow up with Ashghal and other Authorities to obtain their approvals.
4. Coordinate with all disciplines internally to make sure the deliverables are ready and as expected by the client.
5. Attend all the meetings related to the project internally and externally and prepare all minutes of meetings and progress reports.
As a Highway Engineer,
1. Prepare the Drawings and reports related to highway geometric design for all stages:
a. Concept, b. Preliminary, c. Detailed and d. Tender.
which include
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of pavement design based on AASHTO and QHDM,
3. Coordinate with other department for the interface areas.
4. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
5. Coordination with the geotechnical and Topographical surveyors.
6. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
7. Check and prepare the drawings related to Construction staging of the project
8. Land acquisition Drawings to be provided
Role Deputy Project Manager / Maintenance of Traffic Leader / Highway Design Leader Engineer Client Midmac/Yuksel JV
Project: Maintenance of Traffic, Shop Drawings and Micro Tunneling Design Services.,
Project Description Parsons’ scope of the design services includes the detailed maintenance of traffic (MOT) plans and the designs of an approximately 1,350-m storm water pipe and
a 17-meter deep-bored micro tunnel, and prepares the shop drawings for Pavement, utilities and services for the project which includes (Electricity, water, Q-tel,
Storm water, Foul sewer, Arm Force Lines, QP lines, …etc.). It is a design built project which includes preparing the temporary roads and the detours to allow for
construction of new Salwa roads which contains 4 SPU intersections.
The detours shall cover all stages of construction and be coordinated with existing shops in addition to obtain all necessary approvals.
The project is to prepare the design and deliver it to the contractor to build these detours.
Duty As a DPM,
1. Assist the PM for managing the project to be finalized on schedule
2. Coordinate with all stakeholders including MMUP, Ashghal, ASTAD and other Authorities.
3. Follow up to obtain related approvals.
4. Coordinate with all disciplines internally to make sure the deliverables are ready and as expected by the client.
5. Attend all the meetings related to the project internally and externally and prepare all minutes of meetings and progress reports.
6. Prepare the tender documents and assist at Tendering period
As a Maintenance of Traffic Leader,
1. Deliver the detailed maintenance of traffic (MOT) plans covering all the stages
2. Coordinate with the Authorities to support the contractor obtaining all the approvals required.
As a Highway Design Leader Engineer,
1. Manage a team of Seniors and juniors engineers and CAD Draftsmen to finalize the Drawings and reports related to highway geometric design which
include

4. Abdelfattah Mustafa Odeh, PMP, PEj, BSc Detailed Experience
Page 4 of 10
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Review Pavement calculations based on AASHTO and QHDM,
3. Coordinate with other department for the interface areas.
Role Deputy Project Manager /Highway Design Leader Engineer Client Public Works Authority
Project: Al Waab Street
Project Description Reconstruction, Rehabilitation and Maintenance of Al Waab Street in Doha-Qatar. Al Waab Street is classified as primary road according to QHDM. The project is
about 6.5 Km length with 64m right of way. The existing roundabouts names are Al Bustan R/A, Wholesale R/A, Sports City R/A, Carrefour R/A and Al Manaseer
R/A (total 5 roundabouts). At Hyatt Plaza the new 4-legs signalized intersection is required to replace existing right in/out. The existing roundabouts along Al Waab
Street shall be converted to 4-legs signalized intersections. Service roads and geometry of the intersections should be studied and modified accordingly to suit the
road user’s requirements. Surface water drainage system is required for the whole road and treated sewer effluent system is also required. Foul sewer connection
is required at one roundabout only.
Duty As a DPM,
1. Assist the PM for managing the project to be finalized on schedule
2. Coordinate with all stakeholders.
3. Follow up with Ashghal and other Authorities to obtain their approvals.
4. Coordinate with all disciplines internally to make sure the deliverables are ready and as expected by the client.
5. Attend all the meetings related to the project internally and externally and prepare all minutes of meetings and progress reports.
As a Highway Engineer,
1. Prepare the Drawings and reports related to highway geometric design for all stages:
a. Concept, b. Preliminary, c. Detailed and d. Tender.
which include
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,
3. Coordinate with other department for the interface areas.
4. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
5. Coordination with the geotechnical and Topographical surveyors.
6. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
Role Deputy Project Manager / Highway Design Leader Engineer Client Public Works Authority
Project: Development of Roads and Infrastructure in Zone 54
Project Description The project is the study and full detailed design of the roads and infrastructure of Zone 54 in Doha City. Design works included ground investigation, topographic
survey, traffic surveys and studies, limited road corridor, conceptual design and presentation of conceptual options, preliminary and detailed design of the selected
option and tender and contract documents for 1400 ha, 90 km internal roads.
Duty As a DPM,
1. Assist the PM for managing the project to be finalized on schedule
2. Coordinate with all stakeholders.
3. Follow up with Ashghal and other Authorities to obtain their approvals.
4. Coordinate with all disciplines internally to make sure the deliverables are ready and as expected by the client.
5. Attend all the meetings related to the project internally and externally and prepare all minutes of meetings and progress reports.

5. Abdelfattah Mustafa Odeh, PMP, PEj, BSc Detailed Experience
Page 5 of 10
As a Highway Engineer,
1. Prepare the Drawings and reports related to highway geometric design for all stages:
a. Concept, b. Preliminary, c. Detailed and d. Tender.
which include
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,
3. Coordinate with other department for the interface areas.
4. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
5. Coordination with the geotechnical and Topographical surveyors.
6. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
7. Check and prepare the drawings related to Construction staging of the project
8. Land acquisition Drawings to be provided
Role Deputy Project Manager /Highway Design Leader Engineer Client Public Works Authority
Project: Development of Roads, Intersection and Infrastructure in West Bay, Zone 60 to 68
Project Description The project consists of new construction of part of the internal roads of zone 62 in addition to the construction of the 3 junctions which are at the intersection of
Markhiya Street and Majlis Al Taawon Street, intersection of Al Wahda Street and Al Jamiaa Street and intersection of Al Markhiya Street and Al Jamiaa Street.
The work includes complete infra structure. The existing pavement at the intersection will be demolished and the proposed modifications will include the
following:
 Provision of two dedicated left turning lanes on all four approaches.
 Provision of auxiliary lanes for right turn movements.
 Median widening from 4.00 to 10.70m along both approaches from Al Markhiya Street.
 Redesign of adjacent minor right-in/right-out junctions whose layout was affected with proposed major junctions design.
 Construction of Roads including: Earth works, Curbing works, footpaths and paved areas, and Landscape and irrigation works.
Duty As a DPM,
1. Assist the PM for managing the project to be finalized on schedule
2. Coordinate with all stakeholders.
3. Follow up with Ashghal and other Authorities to obtain their approvals.
4. Coordinate with all disciplines internally to make sure the deliverables are ready and as expected by the client.
5. Attend all the meetings related to the project internally and externally and prepare all minutes of meetings and progress reports.
As a Highway Engineer,
1. Prepare the Drawings and reports related to highway geometric design for all stages:
a. Concept, b. Preliminary, c. Detailed and d. Tender.
which include
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,
3. Coordinate with other department for the interface areas.

6. Abdelfattah Mustafa Odeh, PMP, PEj, BSc Detailed Experience
Page 6 of 10
4. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
5. Coordination with the geotechnical and Topographical surveyors.
6. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
Role Deputy Project Manager /Highway Design Leader Engineer Client Public Works Authority
Project: Development of Roads and Infrastructure in Al Shamal
Project Description Highway Design Engineer of Development of Roads and Infrastructure in Al Shamal at the north of State of Qatar. The total road length is about 100 km and
covering three towns named Abu Dholuf City, Al Shamal City and Al Ruwais City. The project scope consists of full detail design of roads and infrastructure of Al
Shamal area and also involves the evaluation and reporting of the offsite requirements to facilitate the supply and discharge of all utilities. The project include
extension of Al Shamal Corniche road with work associated with a promenade and sea defenses/sea wall the full extent of such requirements. The existing asphalt
roads shall be updated to meet the future planning requirements.
Duty As a DPM,
1. Assist the PM for managing the project to be finalized on schedule
2. Coordinate with all stakeholders.
3. Follow up with Ashghal and other Authorities to obtain their approvals.
4. Coordinate with all disciplines internally to make sure the deliverables are ready and as expected by the client.
5. Attend all the meetings related to the project internally and externally and prepare all minutes of meetings and progress reports.
As a Highway Engineer,
1. Prepare the Drawings and reports related to highway geometric design for all stages:
a. Concept, b. Preliminary, c. Detailed and d. Tender.
which include
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,
3. Coordinate with other department for the interface areas.
4. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
5. Coordination with the geotechnical and Topographical surveyors.
6. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
Role Deputy Project Manager /Highway Design Leader Engineer Client Public Works Authority
Project: West of Al Mashaf,
Project Description Full detail design of infrastructure of the 480,000 m2 subdivision located in the west of Al Mashaf in Zone 91 about 20 km south of central Doha. Design includes
12 Km proposed internal Urban Roads network, in addition to junctions, Roundabout and intersections
Duty As a DPM,
1. Assist the PM for managing the project to be finalized on schedule
2. Coordinate with all stakeholders.
3. Follow up with Ashghal and other Authorities to obtain their approvals.
4. Coordinate with all disciplines internally to make sure the deliverables are ready and as expected by the client.
5. Attend all the meetings related to the project internally and externally and prepare all minutes of meetings and progress reports.
As a Highway Engineer,
1. Prepare the Drawings and reports related to highway geometric design for all stages:

7. Abdelfattah Mustafa Odeh, PMP, PEj, BSc Detailed Experience
Page 7 of 10
a. Concept, b. Preliminary, c. Detailed and d. Tender.
which include
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,
3. Coordinate with other department for the interface areas.
4. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
5. Coordination with the geotechnical and Topographical surveyors.
6. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
Role Deputy Project Manager /Highway Design Leader Engineer Client Public Works Authority
Project: North East of Wakrah.
Project Description The project consists of full detailed design of the proposed Roads network of 13 Km internal roads of the northeastern subdivision of Wakrah located in Zone 90.
Duty As a DPM,
1. Assist the PM for managing the project to be finalized on schedule
2. Coordinate with all stakeholders.
3. Follow up with Ashghal and other Authorities to obtain their approvals.
4. Coordinate with all disciplines internally to make sure the deliverables are ready and as expected by the client.
5. Attend all the meetings related to the project internally and externally and prepare all minutes of meetings and progress reports.
As a Highway Engineer,
1. Prepare the Drawings and reports related to highway geometric design for all stages:
a. Concept, b. Preliminary, c. Detailed and d. Tender.
which include
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,
3. Coordinate with other department for the interface areas.
4. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
5. Coordination with the geotechnical and Topographical surveyors.
6. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
Role Highway Design Leader Engineer Client ASTAD
Project: Sidra Medical and Research Centre,
Project Description The proposed Sidra Medical and Research Center project is located within Education City at the Northwest corner of Dukhan Highway and Al-Gharrafa Street on
an approximate site area of twenty two (22) hectares. The proposed scope of services to be performed by PARSONS International Limited included Internal
Roadway Network System, Internal Signing and Pavement Marking, Surface Water Drainage Design/Analysis associated with the internal roadway system,
Maintenance of Traffic during construction, At Grade Parking Layout, Soft and Hard Landscaping and Structural Design.
Duty As a Highway Design Leader Engineer,
1. Manage a team of Seniors and juniors engineers and CAD Draftsmen to finalize the Drawings and reports related to highway geometric design for all
stages:
a. Concept, b. Preliminary, c. Detailed and d. Tender.
which include

8. Abdelfattah Mustafa Odeh, PMP, PEj, BSc Detailed Experience
Page 8 of 10
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Review the Pavement calculations based on AASHTO and QHDM,
3. Coordinate with other department for the interface areas.
4. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
5. Coordination with the geotechnical and Topographical surveyors.
6. Review all the quantities to finalize the BOQ document and prepare the project specifications.
7. Check and prepare the drawings related to Construction staging of the project
8. Review all the Land acquisition Drawings
Role Highway Design Engineer Client Civil Aviation Authority – Qatar
Project: New Doha International Airport – Airfield Paving, Tunnel and Detention Ponds
Project Description Review the detailed design documents at 60%, 90% and completion of the detailed design phases. The proposed construction package CP10 included the detailed
design and building of Airfield access tunnels, east runway and taxiway, west runway and taxiway, general aviation apron, cargo apron, passenger terminal apron,
isolation pad, and access roads as well as the relevant surface water drainage systems including open channels, closed conduits, culvert crossings, detention
ponds, pump stations, fuel separators, sediment basins, tunnel storage and pumping facilities and sea outfalls. (Estimated Construction Cost = US$ 550 Millions).
Duty As a Highway Design Engineer,
1. Prepare the drawings and reports related to highway geometric design for all stages (Preliminary, Detailed and Tender. ) which include:
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,
3. Land acquisition Drawings to be provided
4. Coordination with the geotechnical and Topographical surveyors.
5. Coordinate with other department for the interface areas.
6. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
7. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
8. Check and prepare the drawings related to Construction staging of the project
Role Highway Design Engineer Client NDIA
Project: NDIA New Doha International Airport – Proposal of for Package 14 (Roads and Bridges)
Project Description The project consists of final design, procurement, construction, start up and commissioning of all elements of airside/landside roadways in addition to the creation
of a road corridor of the necessary width to accommodate the temporary realignment of the Ras Abu Abboud road which will fall outside of future construction
zones for the new Doha International Airport access motorway and interchanges.
Duty As a Highway Design Engineer,
1. Prepare the drawings and reports related to highway geometric design for all stages (Preliminary, Detailed and Tender. ) which include:
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,
3. Land acquisition Drawings to be provided
4. Coordination with the geotechnical and Topographical surveyors.
5. Coordinate with other department for the interface areas.
6. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.

9. Abdelfattah Mustafa Odeh, PMP, PEj, BSc Detailed Experience
Page 9 of 10
7. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
8. Check and prepare the drawings related to Construction staging of the project
Role Highway Design Engineer Client Public Works Authority
Project: Doha Expressway
Project Description The Doha Expressway is part of a strategic plan to modernize transportation for Greater Doha. These major new highway corridors link through the suburbs of
Qatar’s capital city with easy access to the new and old airports, the industrial area, and other major highway arteries such as Salwa Road, Dukhan Road, and
North Road.
Parsons performed the initial concept study for a 22-km alignment that was expanded to 90 km with 39 grade-separated interchanges to serve future
development and population growth. This project took into consideration many factors in developing the final alignment for the upgraded expressway, including
but not limited to cost, traffic flow, existing right-of-way, land acquisition, utility relocation, and overall plans for the future transportation network. The project’s 13
packages integrate complete design of major components: Controlled access highways, Frontage roads, Bridges, tunnels, and retaining walls, Traffic signals,
Utilities such as communications, water, electricity, sewer, and drainage, Landscaping, Micro tunnels, and Street lighting
Duty As a Highway Design Engineer,
1. Prepare the drawings and reports related to highway geometric design for all stages (Concept, Preliminary, Detailed and Tender. ) which include:
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,
3. Land acquisition Drawings to be provided
4. Coordination with the geotechnical and Topographical surveyors.
5. Coordinate with other department for the interface areas.
6. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
7. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
8. Check and prepare the drawings related to Construction staging of the project
Role Highway Design Engineer Client Public Works Authority
Project: Wakrah Bypass - Project 15
Project Description The Wakrah Bypass (Project 15) is a 12-km major North-South Expressway with 5 main interchanges connecting to the Wakra-Mesaieed Road, just southwest of
Wakrah. The main road consisted of a 10-lane section (5 lanes in each direction) with the provision for a future additional of two more lanes in each direction
(totaling to a 14-lane section).
Duty As a Highway Design Engineer,
1. Prepare the drawings and reports related to highway geometric design for all stages (Preliminary, Detailed and Tender) which include:
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,
3. Land acquisition Drawings to be provided
4. Coordination with the geotechnical and Topographical surveyors.
5. Coordinate with other department for the interface areas.
6. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
7. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
8. Check and prepare the drawings related to Construction staging of the project
Role Highway Design Engineer Client Public Works Authority

10. Abdelfattah Mustafa Odeh, PMP, PEj, BSc Detailed Experience
Page 10 of 10
Project: Education City – Dukhan Road
Project Description Education City is divided into North and South Campuses by Dukhan Highway, which runs approximately east-west and was being upgraded to accommodate the
demand by the substantial development which generates significant amount of traffic.
The Major task was
 Use the technical specifications developed to develop conceptual design for each intersection within the Education city campus and on the external road network.
 Discuss Draft conceptual plans with relevant stakeholders and Authorities and feed comments back to design team.
 Revise Draft conceptual Design plans after input from relevant stakeholders and Authorities
The project contained five major junctions providing access to Education City from Greater Doha area
Duty As a Highway Design Engineer,
1. Prepare the drawings and reports related to highway geometric design for Concept stage which include:
a. Horizontal and vertical alignment
b. Cross sections,
c. Traffic Signage and Marking,
2. Coordinate with the Traffic team for the TIA and the mitigation options.
3. Land acquisition Drawings to be provided
4. Coordination with the geotechnical and Topographical surveyors.
5. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
Role Highway Design Engineer Client Public Works Authority
Project: East West Corridor - Project 10&11
Project Description The project Scope of Work called for the perpetration of preliminary design, detailed design, and tender documents for the construction of approximately 19km of
new freeway, extending from the future Inner Orbital Road (Interchange 32) to Al Matar Street (Interchange 27) and the New Doha International Airport (NDIA). It
was defined as the East West Corridor portion of the Doha Expressway system, and includes Projects 10 and 11 of the Doha Expressway Program. It is intended
to connect the western portions of the Greater Doha Area with the NDIA. The Project included five through lanes in each direction, with auxiliary and Collector-
Distributor Roads as needed. It also included space to accommodate two additional lanes in each direction in the future.
Duty As a Highway Design Engineer,
1. Prepare the drawings and reports related to highway geometric design for all stages (Preliminary, Detailed and Tender. ) which include:
a. Horizontal and vertical alignment b. Cross sections, c. Grading,
d. Traffic Signage and Marking, e. Traffic Signal details, f. Construction details
2. Prepare the Pavement structure calculations of the pavement design based on AASHTO and QHDM,
3. Land acquisition Drawings to be provided
4. Coordination with the geotechnical and Topographical surveyors.
5. Coordinate with other department for the interface areas.
6. Review the Road Safety Audit output which is done by third party consultant and update the design to satisfy all their requirements.
7. Calculate all the quantities to finalize the BOQ document and prepare the project specifications.
8. Check and prepare the drawings related to Construction staging of the project