Blood bank equipments in the hospital
•
1 like•745 views
A blood bank is a center where blood gathered as a result of blood donation is stored and preserved for later use in blood transfusion. The term "blood bank" typically refers to a division of a hospital where the storage of blood products occurs and where proper testing is performed.
Report
Share
Report
Share
Download to read offline
Recommended
Equipments used Histopathology
This document discusses the equipment used in a histopathology lab. It describes microscopes, microtomes, paraffin wax baths, slide warmers, and knives for sectioning tissues. Tissues are embedded in cassettes of different colors and stored in cabinets. Automatic tissue processors are used for dehydrating and embedding tissues in wax. The overall purpose is to examine tissue samples microscopically to study disease manifestations.
ANATOMY 1st BSC.,MLT QUESTION PAPER
S.V.MEDICAL COLLEGE,TIRUPATI Affiliated to NTR UNIVERSITY,VIJAYAWADA.
Fundamentals of Blood Banking
The document discusses the key aspects of operating a blood bank, including collecting, processing, storing and distributing blood and blood products. It notes that a blood bank collects, tests and stores blood, separating it into components like red blood cells, platelets, plasma. The main functions of a blood bank are donor registration and screening, blood collection and processing, product storage and issuance, and handling transfusion reactions. Standards for facilities, personnel, quality control, documentation and standard operating procedures are important to ensure the safe management of blood and blood products.
Sample collection & anticoagulants_dr anupam singh
This document discusses blood collection procedures and anticoagulants. It explains that blood can be collected from veins, capillaries, or arteries for various tests like hematological, biochemical, serological, and molecular examinations. The venipuncture procedure and necessary supplies are outlined. Common anticoagulants like EDTA are described which prevent clotting by chelating calcium. Effects of storage temperature and time on blood cell counts and morphology are also summarized.
quality control in blood banking
Quality assurance in blood banking involves implementing quality control checks at various stages of the blood collection and processing process. This includes donor screening, blood collection following aseptic techniques, proper storage and labeling of blood components, sterility testing, equipment calibration, and testing blood components for key attributes like volume and factors. Regular internal and external quality audits help ensure standards are maintained.
Morphology of white blood cells
This document summarizes the morphology of normal white blood cells and platelets. It provides reference ranges for total white blood cell count and differential counts. It describes the characteristics of neutrophils, eosinophils, basophils, lymphocytes, and monocytes. It also discusses qualitative abnormalities that may affect white blood cells, including inherited conditions, acquired conditions, and leukemias. Finally, it provides a brief overview of platelet structure and disorders of platelets.
NON NEOPLASTIC WHITE BLOOD CELLS (WBCs) DISORDERS
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Blood Bank Instruments
We Jeshra group with brand TESCONIC have started over a decade ago with a humble beginning. Now we have a large manufacturing capacity with state of the art facilities to cater the increased demand for both domestic and international markets. we are into manufacturing and exporting Blood Bank and pharmaceutical equipments to several countries world wide.
Our main interest lies in manufacturing trouble-free Blood Bank Instruments and Laboratory Freezers.
Today we are one of the reputed brand in the country and with highly talented production and sales team.
Our manufacturing facilities follow the guidelines of WHO-GMP, with ISO 9001:2015 and ISO 13485:2016certification for design, manufacturing and supply of blood Bank & Pharma Instruments.
Our main Objective is to become world class manufacturer of Blood Bank and Pharmaceutical Equipment’s and also to maintain our quality standards, delivery and providing the best and quick after sales service
Recommended
Equipments used Histopathology
This document discusses the equipment used in a histopathology lab. It describes microscopes, microtomes, paraffin wax baths, slide warmers, and knives for sectioning tissues. Tissues are embedded in cassettes of different colors and stored in cabinets. Automatic tissue processors are used for dehydrating and embedding tissues in wax. The overall purpose is to examine tissue samples microscopically to study disease manifestations.
ANATOMY 1st BSC.,MLT QUESTION PAPER
S.V.MEDICAL COLLEGE,TIRUPATI Affiliated to NTR UNIVERSITY,VIJAYAWADA.
Fundamentals of Blood Banking
The document discusses the key aspects of operating a blood bank, including collecting, processing, storing and distributing blood and blood products. It notes that a blood bank collects, tests and stores blood, separating it into components like red blood cells, platelets, plasma. The main functions of a blood bank are donor registration and screening, blood collection and processing, product storage and issuance, and handling transfusion reactions. Standards for facilities, personnel, quality control, documentation and standard operating procedures are important to ensure the safe management of blood and blood products.
Sample collection & anticoagulants_dr anupam singh
This document discusses blood collection procedures and anticoagulants. It explains that blood can be collected from veins, capillaries, or arteries for various tests like hematological, biochemical, serological, and molecular examinations. The venipuncture procedure and necessary supplies are outlined. Common anticoagulants like EDTA are described which prevent clotting by chelating calcium. Effects of storage temperature and time on blood cell counts and morphology are also summarized.
quality control in blood banking
Quality assurance in blood banking involves implementing quality control checks at various stages of the blood collection and processing process. This includes donor screening, blood collection following aseptic techniques, proper storage and labeling of blood components, sterility testing, equipment calibration, and testing blood components for key attributes like volume and factors. Regular internal and external quality audits help ensure standards are maintained.
Morphology of white blood cells
This document summarizes the morphology of normal white blood cells and platelets. It provides reference ranges for total white blood cell count and differential counts. It describes the characteristics of neutrophils, eosinophils, basophils, lymphocytes, and monocytes. It also discusses qualitative abnormalities that may affect white blood cells, including inherited conditions, acquired conditions, and leukemias. Finally, it provides a brief overview of platelet structure and disorders of platelets.
NON NEOPLASTIC WHITE BLOOD CELLS (WBCs) DISORDERS
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Blood Bank Instruments
We Jeshra group with brand TESCONIC have started over a decade ago with a humble beginning. Now we have a large manufacturing capacity with state of the art facilities to cater the increased demand for both domestic and international markets. we are into manufacturing and exporting Blood Bank and pharmaceutical equipments to several countries world wide.
Our main interest lies in manufacturing trouble-free Blood Bank Instruments and Laboratory Freezers.
Today we are one of the reputed brand in the country and with highly talented production and sales team.
Our manufacturing facilities follow the guidelines of WHO-GMP, with ISO 9001:2015 and ISO 13485:2016certification for design, manufacturing and supply of blood Bank & Pharma Instruments.
Our main Objective is to become world class manufacturer of Blood Bank and Pharmaceutical Equipment’s and also to maintain our quality standards, delivery and providing the best and quick after sales service
Anticoagulants used in haematology
This document discusses various anticoagulants used in hematology. It describes the characteristics anticoagulants should have and provides details on commonly used anticoagulants including EDTA, oxalates, heparin, sodium citrate, and sodium fluoride/potassium oxalate mixtures. The anticoagulants are classified as calcium chelators or non-calcium chelators and the mechanisms of action, concentrations, advantages, and disadvantages of each type are outlined.
Museum techniques
This document provides information on techniques for collecting, preparing, preserving, and displaying specimens in a pathology museum. It discusses receiving specimens from hospitals and laboratories, preparing them by washing and fixing in formalin-based solutions, restoring color with alcohol, and long-term preservation by mounting in glycerin-based solutions. Special techniques are described for various organs and structures like lungs, brains, and calculi. The goal is to maintain specimens in a lifelike state for teaching and display over many years.
Automation in hematology part 1
This document discusses automation in hematology. It begins by outlining the necessity for automation in cell counting, diagnosing various blood conditions, and performing multiple tests on a single platform. The document then covers the advantages and disadvantages of automation, including increased speed and accuracy versus high costs. It describes the various principles used in automated hematology analyzers, such as electrical impedance, optical light scattering, and flow cytometry. Finally, it provides details on specific analyzers like the Pentra ES 60 and Pentra DF Nexus.
Abo blood group system by Pandian M, Tutor, Dept of Physiology, DYPMCKOP.
SLO’s
INTRODUCTION
HISTORICAL REVIEW
EVOLUTION
CLASSIFICATION
ABOUT CLASSICAL ABO BLOOD GROUPING SYSTEM
AGGLUTINOGENS
AGGLUTININS
TYPES OF ABO BLOOD GROUPS
POPULATION DISTRIBUTION
INHERITANCE
DETERMINATION
CLINICAL IMPRTANCE
Blood Transport
Blood and blood products must be stored between 2-6°C to prevent bacterial growth or cell damage from freezing. They use anticoagulants like EDTA, sodium citrate, and heparin to prevent clotting during storage and transport. When transporting blood between locations in a large hospital, it must be kept in a insulated carrier to maintain the temperature below 10°C. Blood should be transfused within 30 minutes of removal from refrigerated storage.
Blood bank equipments ss
The document lists various instruments and equipment used in a blood bank laboratory, including personal protective equipment to protect workers, instruments for measuring and transferring liquids, equipment for separating blood components like centrifuges, refrigerators and freezers for storing blood and its components, microscopes, and waste segregation materials. It describes the uses of common lab equipment like test tubes, pipettes, balances, and autoclaves. Protective equipment and carefully measuring and storing blood are essential aspects of working in a blood bank laboratory.
Pcv
This document discusses the determination of red blood cell indices including packed cell volume (PCV), mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH), and mean corpuscular hemoglobin concentration (MCHC). It describes the macrohematocrit or Wintrobe tube method for determining PCV which involves centrifuging a blood sample and measuring the ratio of packed red cells to total blood volume. Formulas are provided for calculating MCV from PCV and RBC count, MCH from hemoglobin and RBC count, and MCHC from hemoglobin and PCV. Normal ranges are listed for each index.
Introduction to haematology laboratory
1. The document provides instructions on the proper use and care of laboratory instruments and glassware, with a focus on microscopes.
2. It describes the main parts of the microscope, including the base, arm, body tube, ocular lens, objective lenses, stage, condenser, and focusing knobs.
3. Directions are given for calculating total magnification, focusing, and cleaning the microscope, as well as safely transporting and storing the instrument.
Blood banking
This document summarizes key aspects of blood banking. It discusses the purpose of blood banking as collecting, typing, separating, storing, and preparing blood for transfusion. It outlines the major blood group systems including ABO and Rh, which are the most immunogenic. The document compares ABO and Rh in terms of antigen location, distribution, development, and nature of antibodies. It also describes the types of blood donation and the donor selection process involving counseling, medical history, physical exam, and hemoglobin estimation. Finally, it briefly mentions types of blood bags, anticoagulants, component separation, and screening tests for diseases.
Blood Group Systems_ABO & Rh.ppt
This document discusses blood group systems, specifically ABO and Rh blood groups. It provides details on:
- The antigens found on red blood cell membranes that determine blood type
- Landsteiner's discovery of the ABO blood group system in 1900 and the four main blood types (A, B, AB, and O)
- The antigens and antibodies present in each blood type
- Rh blood group system including the Rho(D) antigen and typing only for Rho(D) to determine Rh status
- Techniques for blood typing including tube, slide, microplate, and newer gel/cassette methods
- Interpreting and resolving discrepancies in blood typing results
Blood grouping
This document discusses the importance of blood grouping and Landsteiner's law of blood grouping. It describes the ABO blood group system and the universal donor and recipient groups. The key blood grouping techniques of slide method and tube method are outlined. The slide method is a preliminary test while the tube method is the gold standard. The document explains the process of cell grouping (forward grouping) and serum grouping (reverse grouping) using the tube method. It also discusses grading of agglutination results and the importance of cross-matching blood prior to transfusion to avoid mismatched reactions.
PLATELET COUNT by Dr. Pandian M .pptx
Dr. Pandian M describes the procedure for performing a platelet count. Platelets serve important hemostatic functions and their normal range is 1.5-4 lakhs/cumm. The procedure involves mixing blood with a diluting fluid in a Neubauer chamber, then counting platelets in grid squares under a microscope. For the sample, 40 platelets were counted in 1/50 mm3, indicating a platelet count of 2 lakhs/mm3 of blood, within the normal range. Abnormally high or low platelet counts can occur due to various bone marrow and other disorders.
Blood grouping and Cross matching
This presentation aims to help medicine undergraduates and post graduates in the department of Pathology and Department of transfusion medicine for better understanding of various blood grouping systems, sub groups, RBC antigens and corresponding antibodies. It also covers the practical aspect of blood grouping and cross matching.
Histokinetic by dr narmada
This document discusses the process of histology, which involves preparing tissue samples for microscopic examination. Specimens should be transported in fixatives like formalin or refrigerated. There are several steps involved including fixation, processing, sectioning, staining, and mounting. Tissue processors are used to dehydrate samples through a series of alcohols and xylene before infiltrating and embedding them in paraffin wax for sectioning with a microtome. Sections are then stained using techniques like H&E staining before examination under a microscope. Frozen sectioning and newer techniques using resins and microwaves can also be used to prepare samples for histological analysis.
Le cell
The LE cell demonstration document describes the LE cell, which is a neutrophil that has phagocytosed nuclear material coated with antinuclear antibodies, a characteristic of lupus erythematosus. It discusses several methods for demonstrating LE cells in blood samples, including using clotted blood, defibrinated blood, or the rotary method. The rotary method involves adding glass beads to heparinized blood and rotating at 50rpm for 30 minutes at 37 degrees Celsius before preparing buffy coat smears to identify LE cells.
Tissue processing
This document describes the process of tissue processing for microscopic examination. Tissue samples are first fixed in formalin to prevent decomposition. They are then dehydrated by passing through increasing concentrations of alcohol, cleared using xylene to remove the alcohol, and infiltrated with paraffin wax. The tissues are embedded in wax blocks and sectioned using a microtome. The sections are stained, most commonly with hematoxylin and eosin, which stain nuclei purple and cytoplasm pink. This allows examination under a microscope.
Museum techniques
This document discusses techniques for collecting, preparing, fixing, and preserving pathological specimens for display in a museum. Some key points covered include:
- Specimens should be collected from hospitals and received with patient details, then washed in saline and fixed within 2 hours to prevent autolysis.
- Fixation using Kaiserling's formalin-based solutions arrests decay and stabilizes tissues. It is important to ensure even penetration and the correct volume, temperature, pH and time of fixation.
- After fixation, specimens may be treated with alcohol to restore color before long-term preservation in mounting fluid, such as a glycerin-based solution.
- Hollow organs should be inflated or packed during fixation to
Automation in hematology
Automation In Haematology.
Dept Of Lab Medicine
Basavatarakam Indo American Hospital And Research Institute
Microtome knife profile
There are several knife profiles used for microtomy including Profile A (plano concave), Profile B (biconcave), Profile C (wedge), and Profile D (tool edge). Profile A has one flat side and one concave side and is used for soft tissues embedded in nitrocellulose. Profile B is classical with concavity on both sides and was introduced by Heiffor. Profile C is a standard wedge profile used for cutting all materials in all microtomes. Profile D is a wedge knife with a steep cutting edge used for hard objects like bone.
Departments in the hospital and Biomedical Equipments
WEB https://www.atheenapandian.com/
CHANNEL - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
X ray
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
More Related Content
What's hot
Anticoagulants used in haematology
This document discusses various anticoagulants used in hematology. It describes the characteristics anticoagulants should have and provides details on commonly used anticoagulants including EDTA, oxalates, heparin, sodium citrate, and sodium fluoride/potassium oxalate mixtures. The anticoagulants are classified as calcium chelators or non-calcium chelators and the mechanisms of action, concentrations, advantages, and disadvantages of each type are outlined.
Museum techniques
This document provides information on techniques for collecting, preparing, preserving, and displaying specimens in a pathology museum. It discusses receiving specimens from hospitals and laboratories, preparing them by washing and fixing in formalin-based solutions, restoring color with alcohol, and long-term preservation by mounting in glycerin-based solutions. Special techniques are described for various organs and structures like lungs, brains, and calculi. The goal is to maintain specimens in a lifelike state for teaching and display over many years.
Automation in hematology part 1
This document discusses automation in hematology. It begins by outlining the necessity for automation in cell counting, diagnosing various blood conditions, and performing multiple tests on a single platform. The document then covers the advantages and disadvantages of automation, including increased speed and accuracy versus high costs. It describes the various principles used in automated hematology analyzers, such as electrical impedance, optical light scattering, and flow cytometry. Finally, it provides details on specific analyzers like the Pentra ES 60 and Pentra DF Nexus.
Abo blood group system by Pandian M, Tutor, Dept of Physiology, DYPMCKOP.
SLO’s
INTRODUCTION
HISTORICAL REVIEW
EVOLUTION
CLASSIFICATION
ABOUT CLASSICAL ABO BLOOD GROUPING SYSTEM
AGGLUTINOGENS
AGGLUTININS
TYPES OF ABO BLOOD GROUPS
POPULATION DISTRIBUTION
INHERITANCE
DETERMINATION
CLINICAL IMPRTANCE
Blood Transport
Blood and blood products must be stored between 2-6°C to prevent bacterial growth or cell damage from freezing. They use anticoagulants like EDTA, sodium citrate, and heparin to prevent clotting during storage and transport. When transporting blood between locations in a large hospital, it must be kept in a insulated carrier to maintain the temperature below 10°C. Blood should be transfused within 30 minutes of removal from refrigerated storage.
Blood bank equipments ss
The document lists various instruments and equipment used in a blood bank laboratory, including personal protective equipment to protect workers, instruments for measuring and transferring liquids, equipment for separating blood components like centrifuges, refrigerators and freezers for storing blood and its components, microscopes, and waste segregation materials. It describes the uses of common lab equipment like test tubes, pipettes, balances, and autoclaves. Protective equipment and carefully measuring and storing blood are essential aspects of working in a blood bank laboratory.
Pcv
This document discusses the determination of red blood cell indices including packed cell volume (PCV), mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH), and mean corpuscular hemoglobin concentration (MCHC). It describes the macrohematocrit or Wintrobe tube method for determining PCV which involves centrifuging a blood sample and measuring the ratio of packed red cells to total blood volume. Formulas are provided for calculating MCV from PCV and RBC count, MCH from hemoglobin and RBC count, and MCHC from hemoglobin and PCV. Normal ranges are listed for each index.
Introduction to haematology laboratory
1. The document provides instructions on the proper use and care of laboratory instruments and glassware, with a focus on microscopes.
2. It describes the main parts of the microscope, including the base, arm, body tube, ocular lens, objective lenses, stage, condenser, and focusing knobs.
3. Directions are given for calculating total magnification, focusing, and cleaning the microscope, as well as safely transporting and storing the instrument.
Blood banking
This document summarizes key aspects of blood banking. It discusses the purpose of blood banking as collecting, typing, separating, storing, and preparing blood for transfusion. It outlines the major blood group systems including ABO and Rh, which are the most immunogenic. The document compares ABO and Rh in terms of antigen location, distribution, development, and nature of antibodies. It also describes the types of blood donation and the donor selection process involving counseling, medical history, physical exam, and hemoglobin estimation. Finally, it briefly mentions types of blood bags, anticoagulants, component separation, and screening tests for diseases.
Blood Group Systems_ABO & Rh.ppt
This document discusses blood group systems, specifically ABO and Rh blood groups. It provides details on:
- The antigens found on red blood cell membranes that determine blood type
- Landsteiner's discovery of the ABO blood group system in 1900 and the four main blood types (A, B, AB, and O)
- The antigens and antibodies present in each blood type
- Rh blood group system including the Rho(D) antigen and typing only for Rho(D) to determine Rh status
- Techniques for blood typing including tube, slide, microplate, and newer gel/cassette methods
- Interpreting and resolving discrepancies in blood typing results
Blood grouping
This document discusses the importance of blood grouping and Landsteiner's law of blood grouping. It describes the ABO blood group system and the universal donor and recipient groups. The key blood grouping techniques of slide method and tube method are outlined. The slide method is a preliminary test while the tube method is the gold standard. The document explains the process of cell grouping (forward grouping) and serum grouping (reverse grouping) using the tube method. It also discusses grading of agglutination results and the importance of cross-matching blood prior to transfusion to avoid mismatched reactions.
PLATELET COUNT by Dr. Pandian M .pptx
Dr. Pandian M describes the procedure for performing a platelet count. Platelets serve important hemostatic functions and their normal range is 1.5-4 lakhs/cumm. The procedure involves mixing blood with a diluting fluid in a Neubauer chamber, then counting platelets in grid squares under a microscope. For the sample, 40 platelets were counted in 1/50 mm3, indicating a platelet count of 2 lakhs/mm3 of blood, within the normal range. Abnormally high or low platelet counts can occur due to various bone marrow and other disorders.
Blood grouping and Cross matching
This presentation aims to help medicine undergraduates and post graduates in the department of Pathology and Department of transfusion medicine for better understanding of various blood grouping systems, sub groups, RBC antigens and corresponding antibodies. It also covers the practical aspect of blood grouping and cross matching.
Histokinetic by dr narmada
This document discusses the process of histology, which involves preparing tissue samples for microscopic examination. Specimens should be transported in fixatives like formalin or refrigerated. There are several steps involved including fixation, processing, sectioning, staining, and mounting. Tissue processors are used to dehydrate samples through a series of alcohols and xylene before infiltrating and embedding them in paraffin wax for sectioning with a microtome. Sections are then stained using techniques like H&E staining before examination under a microscope. Frozen sectioning and newer techniques using resins and microwaves can also be used to prepare samples for histological analysis.
Le cell
The LE cell demonstration document describes the LE cell, which is a neutrophil that has phagocytosed nuclear material coated with antinuclear antibodies, a characteristic of lupus erythematosus. It discusses several methods for demonstrating LE cells in blood samples, including using clotted blood, defibrinated blood, or the rotary method. The rotary method involves adding glass beads to heparinized blood and rotating at 50rpm for 30 minutes at 37 degrees Celsius before preparing buffy coat smears to identify LE cells.
Tissue processing
This document describes the process of tissue processing for microscopic examination. Tissue samples are first fixed in formalin to prevent decomposition. They are then dehydrated by passing through increasing concentrations of alcohol, cleared using xylene to remove the alcohol, and infiltrated with paraffin wax. The tissues are embedded in wax blocks and sectioned using a microtome. The sections are stained, most commonly with hematoxylin and eosin, which stain nuclei purple and cytoplasm pink. This allows examination under a microscope.
Museum techniques
This document discusses techniques for collecting, preparing, fixing, and preserving pathological specimens for display in a museum. Some key points covered include:
- Specimens should be collected from hospitals and received with patient details, then washed in saline and fixed within 2 hours to prevent autolysis.
- Fixation using Kaiserling's formalin-based solutions arrests decay and stabilizes tissues. It is important to ensure even penetration and the correct volume, temperature, pH and time of fixation.
- After fixation, specimens may be treated with alcohol to restore color before long-term preservation in mounting fluid, such as a glycerin-based solution.
- Hollow organs should be inflated or packed during fixation to
Automation in hematology
Automation In Haematology.
Dept Of Lab Medicine
Basavatarakam Indo American Hospital And Research Institute
Microtome knife profile
There are several knife profiles used for microtomy including Profile A (plano concave), Profile B (biconcave), Profile C (wedge), and Profile D (tool edge). Profile A has one flat side and one concave side and is used for soft tissues embedded in nitrocellulose. Profile B is classical with concavity on both sides and was introduced by Heiffor. Profile C is a standard wedge profile used for cutting all materials in all microtomes. Profile D is a wedge knife with a steep cutting edge used for hard objects like bone.
What's hot (20)
Abo blood group system by Pandian M, Tutor, Dept of Physiology, DYPMCKOP.
Abo blood group system by Pandian M, Tutor, Dept of Physiology, DYPMCKOP.
More from AtheenaPandian Enterprises
Departments in the hospital and Biomedical Equipments
WEB https://www.atheenapandian.com/
CHANNEL - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
X ray
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Weighing scale
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Thermometer
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Tens
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Syringe pump
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Stethoscope
This document provides training on the use of a stethoscope for biomedical equipment. It discusses the construction, functionality, and demonstration of a stethoscope. Key topics covered include how to use the device to listen to sounds in the heart and lungs. The training aims to help users understand the product and properly operate the important medical instrument.
Sphygmomanometer
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Slit lamp
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Pulse oximeter
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Phototherapy unit
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Otoscope
An otoscope is a medical device used to examine the ear canal and eardrum. Health care providers use otoscopes during regular check-ups to screen for illnesses or investigate ear symptoms by providing a view of the inner ear. However, the presence of earwax, debris, or ear diseases can obstruct the view. Otoscopes come in three types - pocket, full-size, and video - to aid examination of the ear.
Nebulizer
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Manipol massager
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Keratometer
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Infusion pump
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Hearing aid
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Hammer massager
Biomedical equipment training provides instruction on how to properly operate and maintain various medical devices. The course covers topics such as electrocardiographs, defibrillators, ventilators, and other equipment used in patient care. Attendees will learn safety procedures, functional tests, preventative maintenance, calibration, and repair of biomedical devices.
Fetal doppler
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
Dozee
Web - https://www.atheenapandian.com/
Channel - https://www.youtube.com/channel/UCdiZr0q55i8UOb63Pnbbudg?view_as=subscriber
More from AtheenaPandian Enterprises (20)
Departments in the hospital and Biomedical Equipments
Departments in the hospital and Biomedical Equipments
Recently uploaded
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Recently uploaded (20)
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Data Control Language.pptx Data Control Language.pptx
Data Control Language.pptx Data Control Language.pptx
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...