This presentation demonstrates how to apply the product Anydron 2K. The product is a liquid-applied waterproofing system, based on PU technology. The presentation demonstrates all the necessary steps such surface preparation, priming, application of the product, and additional protection. Visit http://www.ktisis.eu

1. Working
with Liquid-applied
Waterproofing membrane

2. Anydron 2K is a PU liquid-applied coatings
system that produces a seamless 100%
waterproof surface

3. It is used as a waterproofing membrane on a
number of constructions such as
• Flat rooftops
• Balconies
• polyurethane foam insulation
• bridges
• Foundations
• Flowerbeds
• water tanks
• Synthetic membranes
Uses

4. • Extraordinary resilience to high and low
temperatures
• 10+ years lifetime
• High elasticity enabling bridging of cracks
Key Benefits

5. • Cool roof properties
• Resistant to stagnant (ponding) water
• Flexibility in adding extra coatings,
patching, working on existing roofs with
obstacles
Key Benefits

6. Application Procedure

7. The surface must be completely dry, free
of loose material, dust, mould, oils, greases
etc.
Surface Preparation

8. When coating over previously applied coatings
make sure that any loose parts have been
removed and that the area has been properly
cleaned.
It you are unsure when working over a previous
coating, it is advisable to perform a test
application over a small area first.
Surface Preparation

9. It is recommended to prepare the surface by
grinding or sanding.
Always make sure that the surface in question is
suitable for the surface preparation method that
you plan to use.
Surface Preparation

10. If the application area is
washed with water, ensure
that it has completely
dried before starting work
Surface Preparation

11. So what about priming
the surface?

12. It is always recommended to prime the
surface to enable maximum adhesion
and performance of the coating.

13. We recommend two different
primers depending on the need:
Priming

14. Ktisoplast Primer
An acrylic water-based primer suitable for
porous concrete and cement surfaces
Priming

15. Ktisepox Hydro PR
A 2-component Water-based epoxy primer that
can deal with many challenging surfaces such as:
• Bitumen
• Marble
• Metal
• Terrazo
• Tiles
• Cement/ Concrete
Priming

16. Cracks and joints should be repaired with Ktisodur
PU or Acrylic Mastic and let to dry for at least 2
hours before applying.
Filling Cracks and Joints

17. Let’s get to Work!

18. Pour the contents of can B into bucket A. The
mixing of the two materials needs to be consistent
(with a mixer) and should last for at least 3-4
minutes at 300rpm.
Preparing Anydron 2K

19. The product can be applied with one of the
following methods:
• Roller
• brush
• airless spray gun
Applying Anydron 2K

20. Apply at least two layers
of the material. The second
layer should be applied
within 18-36 hours.
Applying Anydron 2K

21. It is also possible to add an additional
protective layer of KTISOPUR UV (coloured
PU coating) or Anydron TR (transparent
coating) on top.
The top layer makes the coating more
durable to frequent traffic loads as well as
providing longer-term resistance.
Adding a protective topcoat

22. Anydron 2K can also be applied together with a fibre
mesh sheet to create a stronger layer
Strengthening the Membrane

23. IMPORTANT
POINTS

24. Humidity
Products like Anydron 2K are extremely
sensitive to humid surfaces. Therefore all
application should be carried out with dry
surfaces. When applying on fresh concrete
wait at least 28 days before applying.

25. Humidity
Furthermore when working during
winter and humid months avoid
applying the product early in the
morning when surfaces may be damp
because of night-time humidity

26. Under no
circumstances should
water be added as a
diluting agent!
Humidity

27. Visit this link for a video demonstration on
how to apply the product on an old rooftop
http://www.youtube.com/watch?v=9SBpTw
Cx9Z8

28. Any Questions?

29. Do you require any further
information?
Any advice on how to approach your
waterproofing project?
Do you want to share your
experiences with us?

30. Davari and Christodoulou Street
19002 Peania GREECE
email: office@ktisis.eu
http://www.ktisis.eu
Contact Us!

31. Twitter: https://twitter.com/KtisisEU
Facebook: www.facebook.com/Ktisiscoatings
LinkedIn: http://www.linkedin.com/company/2544597

32. Thank you for watching!