The document summarizes a two component general polymer modified compound waterproofing coating called HS-16(K11). It penetrates concrete using crystalline materials and forms a bond with concrete/cement bases using polymer emulsion and special adhesives. It inhibits mold growth, can be applied directly to tiles/plaster, works on rough surfaces, and damp surfaces. It is non-toxic, resistant to slight impacts and cracks, and suitable for drinking water, pools, and fish ponds. It can waterproof floors, walls, basements, pools, and more. It dries within 24 hours, has a permeability pressure over 0.5MPa, and bonds well over time. It is applied in two to three
WATERGUARD FLEXIBLE comprises of a single part acrylic polymer based flexible waterproofing coating, which contains special filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating that allows to breath the surface.
WATERGUARD FLEXIBLE comprises of a single part acrylic polymer based flexible waterproofing coating, which contains special filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating that allows to breath the surface.
This presentation demonstrates how to apply the product Anydron 2K. The product is a liquid-applied waterproofing system, based on PU technology. The presentation demonstrates all the necessary steps such surface preparation, priming, application of the product, and additional protection. Visit http://www.ktisis.eu
WATERGUARD FLEXIBLE comprises of a single part acrylic polymer based flexible waterproofing coating, which contains special filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating that allows to breath the surface.
WATERGUARD FLEXIBLE comprises of a single part acrylic polymer based flexible waterproofing coating, which contains special filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating that allows to breath the surface.
This presentation demonstrates how to apply the product Anydron 2K. The product is a liquid-applied waterproofing system, based on PU technology. The presentation demonstrates all the necessary steps such surface preparation, priming, application of the product, and additional protection. Visit http://www.ktisis.eu
Polytek’s Floor Patch Paste is a premium quality, 2-part epoxy, patching compound. It provides epoxy
high build, maximum toughness, flexibility, excellent chemical resistance in a quick-drying paste.
admixture
TYPES OF ADMIXTURE
CHEMICAL ADMIXTURE
AIR ENTERINERS
WATER REDUCERS
SET RETARDERS
SET ACCELERATORS
SUPERPLASTICIZER
MINERAL ADMIXTURE
FLY ASH
SILICA FLUMES
SLAG
FUNCTION OF ADMIXTURE
ADVANTAGES OF ADMIXTURE
vedio link
https://youtu.be/HJzgwpquo7w
Flexiplast® - Keeping the cracks in their placeEurovia_Group
When pavement materials treated with hydraulic binders are laid without pre-cracking, they crack
and can cause damage to surface courses. The techniques employed to avoid these problems must
prevent cracks from propagating to the surface over time while maintaining all pavement qualities
such as inter-layer bonding, structure waterproofing and rutting resistance.
Flexiplast®, developed by Eurovia, is one of the few multi-purpose solutions available to provide such
characteristics.
This power point presentation gives you information about the various chemicals, admixtures used to repair members and improve the properties of concrete. it gives you information about the various types of concrete. it gives you information about the various methods of repair.
This presentation has been prepared by civil engineering students of Tolani Foundation Gandhidham Polytechnic:
DHAWANI LAVISH
GAYAKWAD TEJAS
GORASIYA MAYUR
HIRANI YATIN
KATARMAL DARSHAN
LALWANI PIYUSH
MALI VISHNU
PATEL PARTH
PRAJAPATI JAYESH
PRAJAPATI KALPESH
Thank You!!
If cracks develop while curing, this has a long-term negative impact on the concrete service life.
You can improve crack prevention at time of pour, and maximize concrete service life.
#futureof #concrete_curing #hydrogel
Polytek Moisture Sealing Epoxy Primer is a two-component, 100% solids, low viscosity, moisture
accepting epoxy primer. It can reduce the hydrostatic pressure mitted by the floor from 12 lbs per 1000 square feet to less
than 1 lb. Polytek Moisture Seal can even cure underwater without affecting its adhesion. When applied at 73°F / 50%
humidity, Moisture Seal is a 6–7-hour cure.
Cementseal is a two component, polymer modified, cement based, waterproof coating for concrete and masonry.
Find out more here:
http://www.riw.co.uk/products/cement-based-systems/cementseal
Polytek’s Floor Patch Paste is a premium quality, 2-part epoxy, patching compound. It provides epoxy
high build, maximum toughness, flexibility, excellent chemical resistance in a quick-drying paste.
admixture
TYPES OF ADMIXTURE
CHEMICAL ADMIXTURE
AIR ENTERINERS
WATER REDUCERS
SET RETARDERS
SET ACCELERATORS
SUPERPLASTICIZER
MINERAL ADMIXTURE
FLY ASH
SILICA FLUMES
SLAG
FUNCTION OF ADMIXTURE
ADVANTAGES OF ADMIXTURE
vedio link
https://youtu.be/HJzgwpquo7w
Flexiplast® - Keeping the cracks in their placeEurovia_Group
When pavement materials treated with hydraulic binders are laid without pre-cracking, they crack
and can cause damage to surface courses. The techniques employed to avoid these problems must
prevent cracks from propagating to the surface over time while maintaining all pavement qualities
such as inter-layer bonding, structure waterproofing and rutting resistance.
Flexiplast®, developed by Eurovia, is one of the few multi-purpose solutions available to provide such
characteristics.
This power point presentation gives you information about the various chemicals, admixtures used to repair members and improve the properties of concrete. it gives you information about the various types of concrete. it gives you information about the various methods of repair.
This presentation has been prepared by civil engineering students of Tolani Foundation Gandhidham Polytechnic:
DHAWANI LAVISH
GAYAKWAD TEJAS
GORASIYA MAYUR
HIRANI YATIN
KATARMAL DARSHAN
LALWANI PIYUSH
MALI VISHNU
PATEL PARTH
PRAJAPATI JAYESH
PRAJAPATI KALPESH
Thank You!!
If cracks develop while curing, this has a long-term negative impact on the concrete service life.
You can improve crack prevention at time of pour, and maximize concrete service life.
#futureof #concrete_curing #hydrogel
Polytek Moisture Sealing Epoxy Primer is a two-component, 100% solids, low viscosity, moisture
accepting epoxy primer. It can reduce the hydrostatic pressure mitted by the floor from 12 lbs per 1000 square feet to less
than 1 lb. Polytek Moisture Seal can even cure underwater without affecting its adhesion. When applied at 73°F / 50%
humidity, Moisture Seal is a 6–7-hour cure.
Cementseal is a two component, polymer modified, cement based, waterproof coating for concrete and masonry.
Find out more here:
http://www.riw.co.uk/products/cement-based-systems/cementseal
This book describes concrete curing process; why the need to cure concrete works and how to deal with it. This book is among the site books one must have to perfect his/her work.
This includes different method of treatments given in the time of building construction like : Anti termite treatment, water proofing, fire proofing, acoustical architectural, thermal insulation etc.
Non metallic floor hardener - arda indiaJames Brown
Floor Hardener: Arda Polymers Pvt. Ltd. (Arda India) offered range of Non-Metallic Floor Hardeners is exclusively used for the watering Flooring systems.
Cementflex is a two component, polymer modified, flexible, cement based, waterproof coating for concrete and masonry.
Find out more here:
http://www.riw.co.uk/products/cement-based-systems/cementflex
Different benefits of_silicone_foam_gasketsinkeryfoam
This foam is designed with German quality for bonding and sealing of well rings, insulating and filling in roofing and dry construction, insulation and filling of window connection joints; around window frames and shutter boxes. To insulate and fill finished elements and wall cavities.
Self-curing concrete is achieved by means of replacing a part of aggregate by lightweight aggregate or adding chemical admixtures. The self-curing process of concrete takes place from inside to outside, thus reducing the autogenous shrinkage and self-desiccation, especially for the high-performance concrete with relatively low water/binder ratio.
interesting civil engineering topics
civil engineering topics for presentation
seminar topics pdf
best seminar topics for civil engineering
civil seminar topics ppt
civil engineering seminar topics 2019
seminar topics for mechanical engineers
mechanical engineering seminar topics 2018
WATER PROOFING FOR BUILDING
The treatment given to prevent leakage of water from external source is generally termed as WATER PROOFING.
Usually extensive waterproofing measures are added to a building at the time of construction ,to provide moisture control form starting.
Waterproofing may also be done after a building is built ,to address problems as they emerge or as part of building retrofit.
HS-16 (K11) Two Component General Polymer Modified Compound Waterproofing Coating
1. The Waterproofing System Specialist
HESHENG®
HS-16(K11)
Two Component General Polymer Modified Compound Waterproofing
Coating
INTRODUCTION
HS-16 K11 Two Component General Polymer Modified Compound Waterproofing Coating is according to
company's proprietary technology, using the penetration mechanism of crystalline materials on the permeability of
concrete, combined with the polymer emulsion and concrete and cement mortar base special adhesive, water retention,
and certain flexibility, with wool stoma of concrete permeable crystallization, as well as the base to form a whole
consistent with dual compound waterproof material waterproof function of integration.
ADVANCE
1. The coating has the inhibit the growth of mold, can prevent humidity to act the role of the salt pollution;
2. Pulp can be directly after dry solid stickup ceramic tile or plaster leveling;
3. The construction in complex rough surface;
4. Can be in damp base surface construction;
5. Can cover small crack, resist the slight shock;
6. Nonpoisonous and harmless, can be directly used for drinking, pools and fish pond.
APPLICATION RANGE
Apply to the following moistureproof waterproof engineering:
1. Indoor and outdoor cement concrete structure, the cement brick wall, brick wall, light structure;
2. The floor wall floor, kitchen, bathroom, planter, ground, garage;
3. The consumption of pool, swimming pool, fish pond, sewage treatment ponds;
4. Apply brick stone material, ceramic tile, land before the board, wall paper, gypsum board on the substrate of a front
end processing.
MAIN TECHNICAL INDEX
Executive Standard: JC/T 984-2011 Type II
Test Item Index
Setting Time
Initial Setting min ≥45
Final Setting h ≤24
Resistance to
Permeable Pressure Mpa
Coat(Layer) Test-piece 7d ≥0.5
Tension & Pressure Strength Mpa ≥24.0
Tension & Fold Strength Mpa ≥8.0
Flexibility (Lateral deformability) mm ≥1.0
Bonding Strength Mpa
7d ≥1.0
28d ≥1.2
1.Setting time can be adjusted according to user needs and seasonal change.
When the thickness of the products use is not more than 5 mm measured coating specimen permeability pressure;
2. When the thickness of the products use greater than 5 mm mortar
2. specimen permeability pressure. Can choose according to the purpose, determination of coating or seepage
pressure resistance of mortar specimens
CONSTRUCTION TECHNOLOGY
1. The base surface treatment: base must be strong, clean, smooth, moist, without oil and floating ash; The base
surface with pores, cracks and other defects, repaired with cement mortar screeding in advance; inside and outside
Angle with a spatula and to make up half the rounded;
2.Stirring and mixing: mixing by mixing ratio add additive into the container, then slowly add powder into the
additives, at the same time fully stir until do not contain particles, uniform glue paste can be used; In use process
should keep intermittent mixing, in case of layered deposits. Mixing ratio: liquid (additive) : powder = 1:2. 77
(weight ratio);
3. Construction: directly with brush or roller coating on the base, using uniform, do not leak brush; If used in damp,
need to besmear to brush a layer; Used for waterproof, need to besmear to brush two to three layers. When the first
layer of dry solid to just not glue the hand (generally 1-2 hours), can besmear to brush the second layer, every two
layer brushing direction should be perpendicular to the intersection;
4. Coating protection: pulp after the completion of construction, not completely dry before solid coating for the
necessary protection, including a ban on pedestrians, rain erosion, exposure, sharp object injury, etc.; After
completely dry solid coating does not need to do special protective layer;
5. Curing coating: coating 24 hours after the completion of the engineering proposal with wet cloth cover coating or
spray water to curing coating, general 2-3 days; Air humidity is big, poorly ventilated place dry solid time will be
longer, and the shorter, the air circulation, particularly poor environment, for the progress of the mechanical
ventilation method can be used to speed up the dry solid;
6. Construction temperature: is suitable in 5 ℃ and 40 ℃ under the environment of the construction.
DOSAGE OF REFERENCE
Waterproof for no hydrostatic pressure, flow rate of membrane thickness of about 1 mm, 1.5-2.0 kg / ㎡
Used for important waterproof, coating thickness of about 2 mm, 2.5-4.0 kg / ㎡
MATTERS ATTENTION
Limit the use in the following circumstances:
1. The building vibration, displacement, contraction larger part;
2. The structure of the expansion joints, deformation cracks, settlement joint, the post-pouring belt, wall
tube sealing, etc.
PACKAGE AND STORAGE
20kg/Pail
Stored in dry place, not unsealed product, shelf life 12 months
SAFETY MATTERS
This product is alkaline, should avoid contact with the skin for a long time to avoid a large number of
inhalation of dust and pay attention to protect the eyes, the eyes, rinse with clear water and go to a
doctor as soon as possible.
This product non-toxic harmless, belong to environmental protection product.
Foshan Shunde Hesheng Chemical Industry Co., Ltd.
Web: www.he-sheng.com.cn/en/ E-mail:kevin@he-sheng.com.cn
Sales Manager: Kevin Cell/WhatsApp: +86 13794633232 Tel.:+86 757 22904888 Fax.:+86 757 22904999
Headquarter Addr.:No.11-1-2, Fu An Industrial Area, Leliu, Shunde, Foshan City, Guangdong Province, China
Sub-factory Addr.:NO.10 Fuyuan Rd.,Rongbian, Rongui, Shunde, Foshan City, Guangdong Province, China