Work at height by abid nadeem khan
•Download as PPT, PDF•
4 likes•5,174 views
This document provides safety guidelines for working at heights using scaffolding. It advises to never work on scaffolding that is incomplete, missing railings, or in an unstable condition. Proper safety equipment like harnesses and railings should always be used, and only complete, inspected scaffolding is recommended for working at height. Distractions and risky behaviors are to be avoided for safety.
Report
Share
Report
Share
Recommended
Scaffolding safety at construction site
This document provides information on scaffolding safety at construction sites. It defines scaffolding and describes the three main types: supported, suspended, and other scaffolds. Supported scaffolds are platforms supported by poles, legs, frames, and outriggers. Suspended scaffolds are platforms suspended by ropes or overhead support. The document outlines general objectives, hazards, and safety requirements for scaffolds. It provides details on inspection of scaffolding components and good and bad safety practices. The overall goal is to educate personnel on scaffolding safety to prevent accidents and injuries at construction sites.
Scaffold and Aerial Lift Safety by KTA
This document provides an overview of OSHA regulations and safety requirements for scaffolds and aerial lifts. It discusses hazards associated with scaffolds and lifts and covers the OSHA scaffold standard, general requirements for scaffolds, fall protection requirements, training needs, and specific regulations for different types of scaffolds and aerial lifts. Resources for additional information on scaffold and lift safety are also listed.
Fixed and Portable Ladders by NPCA
This document provides an overview of OSHA rules regarding fixed and portable ladders. It outlines general requirements for when employers must provide stairways and ladders, rules for proper ladder use, requirements for specific ladder types (e.g. portable, fixed), rules for defective ladders, and training requirements. The document contains detailed regulations for ladder construction, safety, use, inspection, and fall protection.
Scaffolds ppt construction
Scaffolds are elevated temporary work platforms that come in three types - supported, suspended, and aerial lifts. Employees face hazards from falls, falling objects, electrocution, and scaffold collapse. Fall protection such as guardrails or personal fall arrest systems are required for scaffolds over 10 feet. Other requirements include stable construction, competent oversight, inspection, training, and protecting against falls, falling objects, and collapse.
Scaffold User in Construction by FHM
This document provides an overview of scaffold safety training for construction workers. It covers key OSHA regulations for scaffold users, including requirements for fall protection, guardrails and safety equipment. Various types of scaffolds are defined, along with associated hazards such as falls, falling objects and electrical risks. Proper scaffold use, inspection and loading are emphasized, as well as worker responsibilities to follow safety procedures.
Tutor core 01 working at height
This document discusses health and safety guidelines for various types of equipment used for working at heights in construction, including:
- Hop-up working platforms for working up to 2.4m
- Step ladders which should be free of damage and not used near power lines
- Ladders which should be extended above the working platform and carried safely
- Scaffolding which requires guard rails, toe boards and secure boarding, and should only be erected or dismantled by competent workers
- Tower scaffolds which can be static or mobile and constructed of steel sections
User manual for mobile scaffold
Thank you for purchasing our aluminum mobile scaffold. Please find the User Manual Powerpoint Presentation here for your reference.
Eta Scaffold Training
Definition
Type of scaffolding system
To familiarize with UAE Legal requirements with respect to Scaffolds
To enhance the skill of scaffold erection and inspection.
Safe Procedure for erection & dismantling
Practical on Scaffold Erection & dismantling
Procedure for Scaffold inspection
Recommended
Scaffolding safety at construction site
This document provides information on scaffolding safety at construction sites. It defines scaffolding and describes the three main types: supported, suspended, and other scaffolds. Supported scaffolds are platforms supported by poles, legs, frames, and outriggers. Suspended scaffolds are platforms suspended by ropes or overhead support. The document outlines general objectives, hazards, and safety requirements for scaffolds. It provides details on inspection of scaffolding components and good and bad safety practices. The overall goal is to educate personnel on scaffolding safety to prevent accidents and injuries at construction sites.
Scaffold and Aerial Lift Safety by KTA
This document provides an overview of OSHA regulations and safety requirements for scaffolds and aerial lifts. It discusses hazards associated with scaffolds and lifts and covers the OSHA scaffold standard, general requirements for scaffolds, fall protection requirements, training needs, and specific regulations for different types of scaffolds and aerial lifts. Resources for additional information on scaffold and lift safety are also listed.
Fixed and Portable Ladders by NPCA
This document provides an overview of OSHA rules regarding fixed and portable ladders. It outlines general requirements for when employers must provide stairways and ladders, rules for proper ladder use, requirements for specific ladder types (e.g. portable, fixed), rules for defective ladders, and training requirements. The document contains detailed regulations for ladder construction, safety, use, inspection, and fall protection.
Scaffolds ppt construction
Scaffolds are elevated temporary work platforms that come in three types - supported, suspended, and aerial lifts. Employees face hazards from falls, falling objects, electrocution, and scaffold collapse. Fall protection such as guardrails or personal fall arrest systems are required for scaffolds over 10 feet. Other requirements include stable construction, competent oversight, inspection, training, and protecting against falls, falling objects, and collapse.
Scaffold User in Construction by FHM
This document provides an overview of scaffold safety training for construction workers. It covers key OSHA regulations for scaffold users, including requirements for fall protection, guardrails and safety equipment. Various types of scaffolds are defined, along with associated hazards such as falls, falling objects and electrical risks. Proper scaffold use, inspection and loading are emphasized, as well as worker responsibilities to follow safety procedures.
Tutor core 01 working at height
This document discusses health and safety guidelines for various types of equipment used for working at heights in construction, including:
- Hop-up working platforms for working up to 2.4m
- Step ladders which should be free of damage and not used near power lines
- Ladders which should be extended above the working platform and carried safely
- Scaffolding which requires guard rails, toe boards and secure boarding, and should only be erected or dismantled by competent workers
- Tower scaffolds which can be static or mobile and constructed of steel sections
User manual for mobile scaffold
Thank you for purchasing our aluminum mobile scaffold. Please find the User Manual Powerpoint Presentation here for your reference.
Eta Scaffold Training
Definition
Type of scaffolding system
To familiarize with UAE Legal requirements with respect to Scaffolds
To enhance the skill of scaffold erection and inspection.
Safe Procedure for erection & dismantling
Practical on Scaffold Erection & dismantling
Procedure for Scaffold inspection
Scaffold And Aerial Lift Training by KTA
This document provides an overview of OSHA regulations and safety requirements for scaffolds and aerial lifts. It discusses hazards associated with scaffolds and lifts and covers the OSHA scaffold standard, general requirements for scaffolds, fall protection requirements, training needs, and specific requirements for different types of scaffolds and aerial lifts. Resources for additional information on scaffold and lift safety are also listed.
Scaffolds by HBAA
This document provides guidance on scaffold safety. It defines a competent person and their responsibilities in scaffold construction, alteration, and dismantling. General requirements for scaffolds include inspection prior to use, fall protection above 10 feet, handrails at 42 inches and 21 inches, and toe boards for falling object protection. Scaffolds must support their own weight plus 4 times the intended load. Various types of scaffolds are described, including frame scaffolds, stick-built pole scaffolds, pump jack scaffolds, and hanging scaffold systems.
Scaffolding by UTK
A competent person is required to:
- Identify scaffolding hazards and take corrective action;
- Determine if it is safe for employees to work during storms or high winds; and
- Train employees on scaffold hazards and proper use.
The competent person must inspect scaffolds before each shift and after any incident that could impact structural integrity. They are responsible for selecting scaffold erectors and dismantlers.
Mobile Scaffold Training by UAF
OSHA regulations require training on safe mobile scaffold use. This training document outlines hazards like falls, falling objects, electrical issues and how to control them. It defines mobile scaffolds as movable platforms on wheels/casters used for overhead work. Regulations address inspection, stabilizing during movement, prohibiting riding unless conditions are met. Training covers proper operation, materials handling, inspection and more to ensure safe mobile scaffold use. Case studies of accidents show how following regulations could prevent incidents.
Leaning Ladder & Stepladder Safety
This document discusses safety procedures for working at heights using ladders and stepladders. It covers legislation, accident statistics, pre-use checks, proper positioning, and general safety tips. Positioning is important - ladders should be at a 75 degree angle and extend above the work area. Stepladders must have all four feet on solid ground and not be used in a side-on manner. Pre-use checks include inspecting for damage or defects. Safety measures like tying ladders and maintaining three points of contact are also recommended.
Scaffold
1. Scaffolding materials must meet standards, and a competent supervisor must oversee all scaffolding work including erection, dismantling, and modifications.
2. Scaffold tags must be used to indicate if a scaffold is safe to use, unsafe to use, or requires a full body harness. Tags must be inspected daily.
3. Only trained scaffolders can perform or modify scaffolding work. A full body harness is required for work over 1.6 meters high.
SG4:10 presentation
The document discusses fall prevention methods for scaffolding work as outlined in SG4:10. It emphasizes creating a "safe zone" through fully boarded platforms with guardrails to prevent falls. Advanced guardrail systems that allow protected traversing are presented as alternatives to personal fall arrest equipment. Traversing without protection is no longer permitted; if a safe zone is not possible, workers must remain clipped to an anchor point within 1 meter of the edge.
Ladder safety by ESD
The document discusses ladder safety and proper use. Over 511,000 people are injured each year from improper ladder use. It is important to choose the right ladder for the job based on height, weight capacity, and whether it will be used near electricity. Ladders should be regularly inspected and defective ladders taken out of service. When using a ladder, workers should face the ladder, maintain three points of contact, and not overreach or stand on the top two steps. Proper precautions and maintenance can prevent many ladder-related injuries.
Scaffold
This document provides an overview of scaffolding requirements, including proper erection, inspection, and tagging procedures. It outlines the need for scaffolding to be level, with appropriate guardrails and fall protection. Scaffolding must be safely loaded and secured, with inspections by competent persons to ensure stability before and during use. Color-coded tags are used to indicate the status and safety of scaffolding structures.
Scaffolding training-presentation
This document provides information on scaffold safety. It discusses types of scaffolds like tube and coupler scaffolds, mobile scaffolds, and specialty scaffolds. It outlines regulations for erecting, inspecting, and using scaffolds safely. Scaffold hazards are described, such as not exceeding height to base ratios for mobile scaffolds. Fall protection requirements like guardrails and tie-backs are also outlined. The document seeks to educate workers on scaffold safety procedures and regulations.
Construction Safety Training
This document provides information on construction safety, with a focus on hot work safety, high risk work safety, and safety tools. It discusses hazards and safety procedures for hot work including welding, gas cutting, and grinding. It also covers high risk work such as work at heights, lifting and rigging, confined space entry, excavation work, and electrical work. It emphasizes the importance of pre-task planning, including job safety analyses, and using permit to work systems to identify hazards and controls before dangerous jobs.
SCAFFOLDING
This document provides information on scaffolding safety. It defines what a scaffold is and lists common hazards like collapse, falls, and electrocution. It also discusses assessing risks, controlling risks through means like fall protection, and planning scaffolding work. Different types of scaffolds are described, including tower, mobile, tube and coupler, frame, hung, suspended, trestle, and cantilever scaffolds. Load considerations, materials, and safe erection procedures are outlined.
Scaffolding awareness presentation
This document outlines the itinerary and content for a scaffolding awareness training course. The course covers introduction and aims, types of scaffolding, component identification, inspection procedures, reasons for collapses, and legislation regarding scaffolding safety. Key topics include health and safety regulations, pre-erection checks, erecting, altering, and dismantling scaffolding safely. The goal is for participants to understand their legal responsibilities for inspecting scaffolding before each use.
Scaffolds Training by Pennsylvania L&I
1) A scaffold is a temporary elevated work platform used in construction. There are three main types: supported, suspended, and aerial lifts.
2) Scaffolds must be designed by a qualified person to support at least four times the intended load. They must have a sound footing and be properly inspected before each use.
3) Scaffold safety requires fall protection such as guardrails if a fall could be over 10 feet, and the supervision of a competent person during erection, alteration or dismantling. Hazard prevention includes securing scaffolds in high winds and keeping them clear of ice and snow.
Scaffolding by UWM
The document discusses scaffold safety, including types of scaffolds, erecting and inspecting scaffolds, fall protection, and do's and don'ts of working on scaffolds. It provides information on supported scaffolds, suspended scaffolds, specialty scaffolds, tube and coupler scaffolds, mobile scaffolds, and inspecting job sites. Guidelines are presented on training, inspections, fall protection requirements, erecting scaffolds properly, guardrails and planking, climbing scaffolds, moving mobile scaffolds, and tying scaffolds to structures.
scaffold 2015
This document discusses OSHA standards for scaffold safety. It outlines the most common types of scaffolds cited by OSHA, including fabricated frame scaffolds, pump jack scaffolds, ladder jack scaffolds, mobile scaffolds, and suspended scaffolds. It then details the top 10 most cited OSHA standards for scaffolds, which address requirements for fall protection, training, inspection, bracing, guardrails, access, use, and falling object protection. The document emphasizes that scaffolds must be properly erected and maintained per OSHA standards to prevent injuries from falls, falling objects, and scaffold collapse or movement.
SCAFFOLDING Safety Training
This document provides information on scaffolding safety. It defines common scaffolding components and outlines proper inspection, erection, use, and tagging procedures. Workers must inspect scaffolds before each shift and not exceed the design capacity. The document emphasizes keeping scaffolding plumb, securing all components, using fall protection, and maintaining good housekeeping.
Scaffolding
The document summarizes OSHA regulations for scaffolding under 29 CFR 1926 Subpart L. It outlines requirements for scaffold construction, use, fall protection, access, training and provides definitions. Key points include fall protection requirements at 10 feet, guardrail heights of 36-45 inches, training of erectors and dismantlers, and safe construction of platforms, frames, braces and access. The regulations aim to protect workers by preventing falls, collapse and other scaffold hazards.
OSHA regulations Fall protection
Here are the answers to the quick quiz:
- Anchorages must be 5,000 lbs.
- Fall arrest forces for harnessing shall not exceed 1,800 lbs.
- The best in the hierarchy of fall protection is elimination.
- Covers must hold twice the anticipated load.
- Free fall over 24 inches is not allowed in work positioning.
Ladder Safety by Murray State University
Ladder safety is important to prevent common accidents. The document outlines tips for properly setting up, securing, inspecting, and climbing ladders. Key causes of accidents include overreaching, failing to secure ladders, and standing on the top rung. Ladders should be placed on solid, level ground and secured at the top and bottom. Always inspect ladders for damage before using.
Contingent scaffolding
The document provides guidance for tutors on supporting students who arrive with an assessment due the next day. It advises tutors to establish the demands of the task, plan what the student must do, scaffold the next step, monitor the student's progress, and communicate with the student and teachers. It then outlines specific steps tutors can take to contingently scaffold students, including reading the task, creating a checklist, developing a plan and timeline, providing examples, scaffolding information gathering, monitoring composition, and discussing revisions.
Rigger signalman handbook
This is really good document for newcomers of the engineering. Especially, which the people of the construction industry.
More Related Content
What's hot
Scaffold And Aerial Lift Training by KTA
This document provides an overview of OSHA regulations and safety requirements for scaffolds and aerial lifts. It discusses hazards associated with scaffolds and lifts and covers the OSHA scaffold standard, general requirements for scaffolds, fall protection requirements, training needs, and specific requirements for different types of scaffolds and aerial lifts. Resources for additional information on scaffold and lift safety are also listed.
Scaffolds by HBAA
This document provides guidance on scaffold safety. It defines a competent person and their responsibilities in scaffold construction, alteration, and dismantling. General requirements for scaffolds include inspection prior to use, fall protection above 10 feet, handrails at 42 inches and 21 inches, and toe boards for falling object protection. Scaffolds must support their own weight plus 4 times the intended load. Various types of scaffolds are described, including frame scaffolds, stick-built pole scaffolds, pump jack scaffolds, and hanging scaffold systems.
Scaffolding by UTK
A competent person is required to:
- Identify scaffolding hazards and take corrective action;
- Determine if it is safe for employees to work during storms or high winds; and
- Train employees on scaffold hazards and proper use.
The competent person must inspect scaffolds before each shift and after any incident that could impact structural integrity. They are responsible for selecting scaffold erectors and dismantlers.
Mobile Scaffold Training by UAF
OSHA regulations require training on safe mobile scaffold use. This training document outlines hazards like falls, falling objects, electrical issues and how to control them. It defines mobile scaffolds as movable platforms on wheels/casters used for overhead work. Regulations address inspection, stabilizing during movement, prohibiting riding unless conditions are met. Training covers proper operation, materials handling, inspection and more to ensure safe mobile scaffold use. Case studies of accidents show how following regulations could prevent incidents.
Leaning Ladder & Stepladder Safety
This document discusses safety procedures for working at heights using ladders and stepladders. It covers legislation, accident statistics, pre-use checks, proper positioning, and general safety tips. Positioning is important - ladders should be at a 75 degree angle and extend above the work area. Stepladders must have all four feet on solid ground and not be used in a side-on manner. Pre-use checks include inspecting for damage or defects. Safety measures like tying ladders and maintaining three points of contact are also recommended.
Scaffold
1. Scaffolding materials must meet standards, and a competent supervisor must oversee all scaffolding work including erection, dismantling, and modifications.
2. Scaffold tags must be used to indicate if a scaffold is safe to use, unsafe to use, or requires a full body harness. Tags must be inspected daily.
3. Only trained scaffolders can perform or modify scaffolding work. A full body harness is required for work over 1.6 meters high.
SG4:10 presentation
The document discusses fall prevention methods for scaffolding work as outlined in SG4:10. It emphasizes creating a "safe zone" through fully boarded platforms with guardrails to prevent falls. Advanced guardrail systems that allow protected traversing are presented as alternatives to personal fall arrest equipment. Traversing without protection is no longer permitted; if a safe zone is not possible, workers must remain clipped to an anchor point within 1 meter of the edge.
Ladder safety by ESD
The document discusses ladder safety and proper use. Over 511,000 people are injured each year from improper ladder use. It is important to choose the right ladder for the job based on height, weight capacity, and whether it will be used near electricity. Ladders should be regularly inspected and defective ladders taken out of service. When using a ladder, workers should face the ladder, maintain three points of contact, and not overreach or stand on the top two steps. Proper precautions and maintenance can prevent many ladder-related injuries.
Scaffold
This document provides an overview of scaffolding requirements, including proper erection, inspection, and tagging procedures. It outlines the need for scaffolding to be level, with appropriate guardrails and fall protection. Scaffolding must be safely loaded and secured, with inspections by competent persons to ensure stability before and during use. Color-coded tags are used to indicate the status and safety of scaffolding structures.
Scaffolding training-presentation
This document provides information on scaffold safety. It discusses types of scaffolds like tube and coupler scaffolds, mobile scaffolds, and specialty scaffolds. It outlines regulations for erecting, inspecting, and using scaffolds safely. Scaffold hazards are described, such as not exceeding height to base ratios for mobile scaffolds. Fall protection requirements like guardrails and tie-backs are also outlined. The document seeks to educate workers on scaffold safety procedures and regulations.
Construction Safety Training
This document provides information on construction safety, with a focus on hot work safety, high risk work safety, and safety tools. It discusses hazards and safety procedures for hot work including welding, gas cutting, and grinding. It also covers high risk work such as work at heights, lifting and rigging, confined space entry, excavation work, and electrical work. It emphasizes the importance of pre-task planning, including job safety analyses, and using permit to work systems to identify hazards and controls before dangerous jobs.
SCAFFOLDING
This document provides information on scaffolding safety. It defines what a scaffold is and lists common hazards like collapse, falls, and electrocution. It also discusses assessing risks, controlling risks through means like fall protection, and planning scaffolding work. Different types of scaffolds are described, including tower, mobile, tube and coupler, frame, hung, suspended, trestle, and cantilever scaffolds. Load considerations, materials, and safe erection procedures are outlined.
Scaffolding awareness presentation
This document outlines the itinerary and content for a scaffolding awareness training course. The course covers introduction and aims, types of scaffolding, component identification, inspection procedures, reasons for collapses, and legislation regarding scaffolding safety. Key topics include health and safety regulations, pre-erection checks, erecting, altering, and dismantling scaffolding safely. The goal is for participants to understand their legal responsibilities for inspecting scaffolding before each use.
Scaffolds Training by Pennsylvania L&I
1) A scaffold is a temporary elevated work platform used in construction. There are three main types: supported, suspended, and aerial lifts.
2) Scaffolds must be designed by a qualified person to support at least four times the intended load. They must have a sound footing and be properly inspected before each use.
3) Scaffold safety requires fall protection such as guardrails if a fall could be over 10 feet, and the supervision of a competent person during erection, alteration or dismantling. Hazard prevention includes securing scaffolds in high winds and keeping them clear of ice and snow.
Scaffolding by UWM
The document discusses scaffold safety, including types of scaffolds, erecting and inspecting scaffolds, fall protection, and do's and don'ts of working on scaffolds. It provides information on supported scaffolds, suspended scaffolds, specialty scaffolds, tube and coupler scaffolds, mobile scaffolds, and inspecting job sites. Guidelines are presented on training, inspections, fall protection requirements, erecting scaffolds properly, guardrails and planking, climbing scaffolds, moving mobile scaffolds, and tying scaffolds to structures.
scaffold 2015
This document discusses OSHA standards for scaffold safety. It outlines the most common types of scaffolds cited by OSHA, including fabricated frame scaffolds, pump jack scaffolds, ladder jack scaffolds, mobile scaffolds, and suspended scaffolds. It then details the top 10 most cited OSHA standards for scaffolds, which address requirements for fall protection, training, inspection, bracing, guardrails, access, use, and falling object protection. The document emphasizes that scaffolds must be properly erected and maintained per OSHA standards to prevent injuries from falls, falling objects, and scaffold collapse or movement.
SCAFFOLDING Safety Training
This document provides information on scaffolding safety. It defines common scaffolding components and outlines proper inspection, erection, use, and tagging procedures. Workers must inspect scaffolds before each shift and not exceed the design capacity. The document emphasizes keeping scaffolding plumb, securing all components, using fall protection, and maintaining good housekeeping.
Scaffolding
The document summarizes OSHA regulations for scaffolding under 29 CFR 1926 Subpart L. It outlines requirements for scaffold construction, use, fall protection, access, training and provides definitions. Key points include fall protection requirements at 10 feet, guardrail heights of 36-45 inches, training of erectors and dismantlers, and safe construction of platforms, frames, braces and access. The regulations aim to protect workers by preventing falls, collapse and other scaffold hazards.
OSHA regulations Fall protection
Here are the answers to the quick quiz:
- Anchorages must be 5,000 lbs.
- Fall arrest forces for harnessing shall not exceed 1,800 lbs.
- The best in the hierarchy of fall protection is elimination.
- Covers must hold twice the anticipated load.
- Free fall over 24 inches is not allowed in work positioning.
Ladder Safety by Murray State University
Ladder safety is important to prevent common accidents. The document outlines tips for properly setting up, securing, inspecting, and climbing ladders. Key causes of accidents include overreaching, failing to secure ladders, and standing on the top rung. Ladders should be placed on solid, level ground and secured at the top and bottom. Always inspect ladders for damage before using.
What's hot (20)
Viewers also liked
Contingent scaffolding
The document provides guidance for tutors on supporting students who arrive with an assessment due the next day. It advises tutors to establish the demands of the task, plan what the student must do, scaffold the next step, monitor the student's progress, and communicate with the student and teachers. It then outlines specific steps tutors can take to contingently scaffold students, including reading the task, creating a checklist, developing a plan and timeline, providing examples, scaffolding information gathering, monitoring composition, and discussing revisions.
Rigger signalman handbook
This is really good document for newcomers of the engineering. Especially, which the people of the construction industry.
Wrs rigging practice
Use multiple single leg slings to wrap around off-center loads for better stability. Secure all loose equipment before lifting. When using eye bolts or slings, be aware that their capacity decreases significantly at angled loads. Use proper padding and hitches to control loads and prevent damage.
Top 10 scaffolding interview questions with answers
In this file, you can ref interview materials for scaffolding such as, scaffolding situational interview, scaffolding behavioral interview, scaffolding phone interview, scaffolding interview thank you letter, scaffolding interview tips …
Scaffold classes and duties (cals)
The scaffolding handover certificate outlines the key details of the erected scaffold including the client name, site address, scaffold location, type of scaffold, number of working platforms and lifts, scaffold height and dimensions, access type, design drawing reference, and handover date and time signed by the responsible scaffolder.
Do's and Don'ts of Scaffold Safety
The document provides guidelines for scaffold safety, including dos and don'ts. It recommends getting proper training and retraining for new sites, inspecting scaffolds before use, wearing proper safety equipment like hardhats and boots, and being aware of surroundings. Hazards to avoid include leaving items or overloading scaffolds, using damaged scaffolds, walking on slippery surfaces, and standing on objects to increase height. The document directs readers to a blog post for more information on scaffold safety.
Scaffolding
The document provides information on scaffolding safety training conducted by Mr. V N Parbhu at EERC Theramx Ltd. on September 24-25, 2012. It defines scaffolding and describes the main types of tubular scaffolding. It outlines the various parts of tubular scaffolding such as standards, ledgers, transoms, and couplers. The document discusses requirements for guardrails, toeboards, and access ladders on scaffolds. It also covers inspection procedures and checklists for competent persons, as well as applicable regulations from the Building and Other Construction Workers Act and Factories Act.
Viewers also liked (7)
Top 10 scaffolding interview questions with answers
Top 10 scaffolding interview questions with answers
Similar to Work at height by abid nadeem khan
Ladder safety
This document provides information on ladder safety. It discusses the different types of ladders including wood, fiberglass, aluminum, and extension ladders. It describes proper inspection, set up, and use of ladders. Key points covered include inspecting ladders for defects before using, setting ladders at the proper angle, maintaining three points of contact, and not standing higher than the third rung from the top. The document emphasizes ladder safety practices to prevent injuries from falls or electrical hazards.
Ladder safety
This document provides information on ladder safety. It discusses the different types of ladders including wood, fiberglass, aluminum, and extension ladders. It outlines safety guidelines for inspecting, setting up, climbing, and using ladders properly. Key points include using ladders only for their intended purpose, facing the ladder, maintaining three points of contact, not standing higher than the third rung, and following inspection procedures to identify defects.
Ladder handout
This document provides guidance on safely using ladders at work. It outlines several key points: only use ladders for short, light-duty tasks after completing a risk assessment to determine the right ladder; inspect ladders for damage before each use and only use ladders meeting relevant standards; position, secure, and climb ladders properly, maintaining three points of contact, and store ladders safely when not in use.
Ladder Safety by Rhodes University
1) Falls from ladders are a major cause of workplace injuries, with over 16% of fatal falls occurring from ladders. Common causes of ladder accidents include overreaching, unsecured ladders, and using damaged ladders.
2) There are different types of ladders, including stepladders, single ladders, and fixed ladders. Proper inspection of ladders before each use is critical to ensure they are not damaged or defective.
3) When using a ladder, it must be placed on a stable, level surface and secured properly. Workers should face the ladder and use three points of contact when climbing. Safety precautions like fall protection and traffic control in high-traffic areas are also important
Working Safely With Ladders by GO2HR
The document provides tips for safely using and working with ladders. It outlines 4 steps to ladder safety: deciding when to use a ladder, inspecting the ladder, setting up the ladder properly, and climbing the ladder safely. Key points include inspecting the ladder for defects before using, setting it up on stable ground at a right angle, maintaining 3-point contact while climbing, and not overreaching while on the ladder. The goal is to help employees work safely with ladders and avoid falls.
Tips for Working with your Ladder
The document provides tips for safely using and working with ladders. It outlines 4 steps to ladder safety: deciding when to use a ladder, inspecting the ladder, setting up the ladder properly, and climbing the ladder safely. Key points include inspecting the ladder for defects before using, setting it up on stable ground at a right angle, maintaining 3-point contact while climbing, and not overreaching while on the ladder. The goal is to help employees work safely with ladders and avoid potential falls.
A toolbox talk on leaning ladder and stepladder safety
The toolbox talk provides guidance on safely using ladders and stepladders. It discusses common accidents involving falls from ladders and the importance of inspections and proper positioning. The talk is divided into three sections: hazards and pre-use checks, positioning ladders correctly, and safe use. For positioning, it outlines ensuring firm footing and avoiding slopes for leaning ladders and having all four feet contact the ground and facing the work for stepladders. For safe use, it emphasizes maintaining three points of contact, not overreaching, carrying loads under 25kg, and tying or wedging leaning ladders when possible.
Saftey Slip Trip Falls
This document provides tips to prevent falls in the home and workplace. It advises keeping floors clean and dry, storing items safely, and being aware of potential tripping hazards. Proper lighting and maintenance of stairs and ladders is emphasized. Using equipment like ladders and stepladders safely with caution is recommended, including having sturdy construction and not overreaching heights. Overall it promotes safety attitudes, actions, and good judgment to avoid accidents.
Stevedore safety rules
The document provides safety guidelines for seaport operations and cargo handling. It lists over 20 precautions to take, such as maintaining three points of contact when using ladders, not walking or working on covered hatches, standing clear of moving objects, never standing under loads, using tag lines and wearing proper safety gear, and exercising caution around pinch bars and heavy loads. Following the guidelines helps ensure safety for all personnel during seaport operations.
Laddersafety[1]
This document provides step-by-step instructions for ladder safety. It details how to select the proper ladder based on use and weight limits, how to determine length, inspect ladders for defects, transport ladders safely, set up ladders at the proper angle, climb ladders facing the rungs with three points of contact, avoid hazards like overreaching or side loads, properly care for and store ladders, and inspect ladders on a regular basis to catch defects. Following these guidelines helps ensure ladder safety.
ConstructionLadderSafety xxx.ppt
Falls from ladders are a leading cause of injuries in construction. The Ladder Safety Rule was created to reduce these incidents. This presentation outlines basic safety practices for ladder use, including proper setup with the ladder extending three feet above the work surface, maintaining three points of contact while climbing, not overreaching, and ensuring ladders are in good condition without defects. Misuse of ladders, such as standing on the top step of a stepladder, can lead to falls.
Slips Trips & Falls
The document provides tips to avoid slips, trips, and falls at work or home. It recommends keeping walkways clear of hazards, cleaning up spills immediately, wearing appropriate footwear, and using ladders safely. Key safety measures include keeping eyes forward, adjusting gait on slick surfaces, using handrails, and not carrying items that block vision when walking. The overall message is to identify hazards in advance and choose a safe path to stay injury-free.
Ladder Safety.ppt
Ladder safety guidelines include:
1) Inspecting ladders before use and removing defective ladders, such as those with split rails, missing rungs, or bent hinges.
2) Setting up ladders at a slope of 4:1 and extending them at least 3 feet above the landing point.
3) Securing ladders at the top and ensuring a stable footing, and only allowing one person on the ladder at a time.
Safety Precautions in Using Ladders
The document discusses safety precautions for using ladders and statistics about ladder-related injuries. It notes that over 300 deaths annually are due to ladder injuries in the US. It recommends choosing the right type of ladder based on its duty rating and intended use. It provides tips for safe ladder setup such as securing it at top and bottom, positioning it at least a quarter of its length from the wall at a 75 degree angle, and staying at least 10 feet from power lines. Additional safety tips include wearing slip-resistant shoes, not standing on the top two rungs, and only using ladders suited for the job.
Worksafe Fairfax: Reducing Injuries: Slips, Trips and Falls
This document provides tips and guidelines for preventing slips, trips, and falls. It addresses hazards that can be encountered both indoors and outdoors and recommends proper safety equipment, cleaning spills, keeping pathways clear, using appropriate ladders, and following handrail guidelines. The document emphasizes reporting any incidents or hazards to supervisors.
fall_hazards2.ppt
Fall hazards are one of the greatest risks on construction sites. This presentation discusses common fall hazards and prevention methods. It covers hazards from building structures, exterior areas, scaffolds, stairs, and ladders. Accident prevention includes using guardrail systems, warning lines, and personal fall arrest systems. Proper use of safety equipment and awareness of fall risks can help reduce injuries from working at heights.
40. work at height scaffold
Winter is almost upon us and at this time of the year snow and ice introduce an additional hazard on scaffold platforms and access’s. This toolbox talk covers both working on scaffolds and the hazards of winter.
Spring 2010 Newsletter
This document provides safety guidelines for ladder use during spring cleaning and outdoor projects. It discusses properly inspecting ladders for defects, setting ladders at the correct angle, facing ladders while climbing, keeping ladders clear of slippery materials, and not overreaching while on ladders. Readers are encouraged to think about ladder safety and use common sense practices like securing the ladder footing before climbing.
Ladder Safety in Construction
This document discusses ladder safety practices for construction workers. It states that falls from ladders are a leading cause of injuries and are often due to misuse, faulty equipment, or carelessness. It provides guidance on proper ladder setup, use, inspection, and training to help reduce injuries. Key safety practices include setting ladders at the proper angle, securing them at the top and bottom, using three points of contact when climbing, not overreaching, and inspecting ladders for defects before use.
Construction laddersafety
This document provides guidance on ladder safety practices for construction based on Washington State regulations. It identifies common causes of falls from ladders as misuse, faulty equipment, or carelessness. Guidelines are presented for proper ladder selection, inspection, setup and use. Ladders must be set up at the proper angle, on stable footing, and not exceeded in weight capacity. Workers must climb facing the ladder with three points of contact. Misuse of ladders, such as overreaching or standing on the top step, increases fall risks. Employers must provide ladder safety training for all workers.
Similar to Work at height by abid nadeem khan (20)
A toolbox talk on leaning ladder and stepladder safety
A toolbox talk on leaning ladder and stepladder safety
Worksafe Fairfax: Reducing Injuries: Slips, Trips and Falls
Worksafe Fairfax: Reducing Injuries: Slips, Trips and Falls
Recently uploaded
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaHow to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Types of Herbal Cosmetics its standardization.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Recently uploaded (20)
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Work at height by abid nadeem khan
- 1. Work At height Behavior Base Scaffolding Safety. By: Abid Nadeem Khan
- 2. Never work on wall , Sheets and without Safety harness. Always prefer inspected Scaffolding for work at height activity .
- 3. Never work on roof and sheets. Always prefer Inspected Scaffolding.
- 4. Don’t work on last step of ladder by supporting single pipe. Always prefer proper scaffolding
- 5. Never work on un complete scaffolding , even if you have harness.
- 6. Un Complete Scaffolding .. Missing railing and uncompleted platform
- 7. Un Complete platform … Two planks placed improperly and without tightened ,also too much gape.
- 8. Never work on pipe and never ever tie your harness ,near to your foot, always tie it with railing
- 9. Never work , out side platform by supporting pipes , Also don’t risk your life without harness.
- 10. Never work on scaffolding if missing railing …
- 11. Don’t work and sit on scaffolding ,which is missing railing .
- 12. This person is now concentrating some where else but hazard is still waiting him to make a mistake. Kill the hazards , never work without railing , which protect your life..
- 13. Always use ladder , if missing then don’t work and risk your life.
- 14. Always use ladder , if missing then don’t work and risk your life.
- 15. Always use ladder , Never descend from structure.
- 16. Two persons should not work on single plank and without harness. Always prefer complete platform.
- 17. Don’t use uncompleted harness, missing leg straps..
- 18. Don’t exceed pipes more then 6 to 12 inch from end support.. You have left hazard for your friends . Never do it , just for your relaxation
- 19. Never block the walk ways and emergency routs by scaffolding.
- 20. Never open the door or chain ,which protect you at scaffolding and permanent platform, like batching plant.
- 21. Always close the entrance by protected chain or door at scaffolding and permanent platform.
- 22. Don’t Use Cell Phone during work , Specially work at height
- 23. Always use lanyard with planks on sheet for sheet installation activity.
- 24. Tie the planks properly.. Very good practice
- 25. Use toe boards to protect the tools from falling. And Railing with mid rail for your own protection
- 26. Always tie your harness , and remember above your shoulder.