Azbil MVF Series Micro Flow vortex gas flowmeters provide high sensitivity and quick response through the use of proprietary sensor technology. Temperature and pressure compensation are built in, negating the need for two additional devices.
Magnetic flow meter for industrial process measurementCTi Controltech
Enhanced signal conditioning circuitry provides excellent noise and spike immunity
High stable and repeatable output with ±0.5% of rate accuracy
Minimum process fluid conductivity requirement of 10μS/cm provides maximum applicability
Electrode Status Diagnostic function diagnoses empty pipe condition or electrode scaling
Available in wafer of flanged designs
Both Integral and Remote configurations are available for maximum flexibility
Datasheet Fluke 5080A Multi-Product Calibrator MegOhm Meter Calibration Option Extended Specification. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke AC Measurement Standard. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke Transconductance Amplifier. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke Automated AC Measurement Standard. Hubungi PT. Siwali Swantik...PT. Siwali Swantika
The 5790A is an automated AC measurement standard designed for demanding calibration applications. It combines the accuracy of a thermal transfer standard with the ease of use of a digital multimeter. Absolute AC voltage measurement uncertainties are as low as ±24 ppm. It covers an AC voltage range of 700μV to 1000V and frequency range of 10Hz to 1MHz. The 5790A uses a patented solid-state thermal RMS sensor and thin-film resistor networks to achieve high accuracy and stability. It can be used as a voltmeter or transfer standard and interfaces with automation software and external equipment.
Datasheet Fluke RF Reference Source. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke 52102A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Transconductance Amplifier. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke 5080A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Multi-Product Calibrator. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Magnetic flow meter for industrial process measurementCTi Controltech
Enhanced signal conditioning circuitry provides excellent noise and spike immunity
High stable and repeatable output with ±0.5% of rate accuracy
Minimum process fluid conductivity requirement of 10μS/cm provides maximum applicability
Electrode Status Diagnostic function diagnoses empty pipe condition or electrode scaling
Available in wafer of flanged designs
Both Integral and Remote configurations are available for maximum flexibility
Datasheet Fluke 5080A Multi-Product Calibrator MegOhm Meter Calibration Option Extended Specification. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke AC Measurement Standard. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke Transconductance Amplifier. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke Automated AC Measurement Standard. Hubungi PT. Siwali Swantik...PT. Siwali Swantika
The 5790A is an automated AC measurement standard designed for demanding calibration applications. It combines the accuracy of a thermal transfer standard with the ease of use of a digital multimeter. Absolute AC voltage measurement uncertainties are as low as ±24 ppm. It covers an AC voltage range of 700μV to 1000V and frequency range of 10Hz to 1MHz. The 5790A uses a patented solid-state thermal RMS sensor and thin-film resistor networks to achieve high accuracy and stability. It can be used as a voltmeter or transfer standard and interfaces with automation software and external equipment.
Datasheet Fluke RF Reference Source. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke 52102A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Transconductance Amplifier. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke 5080A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Multi-Product Calibrator. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Cameron's CamCor™ PRO Series Coriolis flow meter features high-accuracy, shallow bow-shaped dual sensor tubes and is ideal for oilfield production applications. This industrial process-grade Coriolis flow meter offers high performance for accuracy, repeatability, wide flow range, low pressure loss, and safe design.
Magnetrol TA2 Thermal Mass Flow Meter for Flare Gas ApplicationsMiller Energy, Inc.
Low flow sensitivity means high reliability for flare gas applications. The Thermatel® TA2 thermal dispersion mass flow meter provides reliable mass flow measurement for flare gas applications to comply with monitoring requirements.
Azbil North America recently added the AX series of multivariable vortex flowmeters for industrial process measurement and control to their product offering. The instrument combines temperature, pressure and velocity measurement in a single instrument to provide accurate mass flow measurement of gases, liquids and steam.
The Brooks® Ar-MiteTM is a reliable, low flow metal tube flowmeter with 316L stainless steel wetted parts. The magnetically coupled indicator provides a highly reliable method of indication. This model is a practical and economical approach to low flow rate indication for high pressure and difficult to handle fluids. Optional accessories include 4-20 mA output, Needle Valve, Flow Controllers and Alarms.
The Model PK200 Current-to-Pneumatic Converter:
- Converts a 4-20mA or 10-50mA input current signal to a proportional pneumatic output signal.
- Has adjustable zero and span settings, high accuracy and reliability, and is minimally affected by environmental conditions.
- Is used to actuate pneumatic devices like valves and cylinders, as well as for signal conversion in hybrid instrumentation systems.
The document provides information about the CT2000 Series industrial drives from Delta Textile including:
- Fanless and wall mount installation models for use in harsh environments to prevent fiber/dust buildup.
- Deceleration Energy Backup function to allow smooth motor stopping in the event of a power outage.
- Built-in PLC and RS-485 communication for simple network control without extra modules.
- Modular design with optional communication, I/O, and feedback cards for customization.
- Rated for use in textile, ceramic, glass and other demanding industries.
The document describes the SFY Functional Safety Frequency-to-DC Transmitter with Display. The SFY monitors frequency, period, pulse width, and contact closure signals, converts the input to a 4-20mA output, and is certified up to SIL 3. It is ideal for use in safety instrumented systems for applications involving turbines, flow meters, variable frequency drives, rotating equipment, and more. The SFY offers accurate and stable measurement, easy setup via PC software, and versatile input choices for low frequencies up to high kHz ranges.
This document provides a summary of products offered by TECPEL co., LTD including precision LCR instruments, function generators, multimeters, and environmental testers. Their product line includes oscilloscopes, power supplies, multi-meters, thermometers, and more. They offer quality instruments for testing electric and electronic components across various parameter and application areas.
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Thermo Scientific gas density meters provide continuous, inline monitoring of gas density or density-related variables to detect any variation in process constituents or product quality in real-time. The meters ensure plant efficiency and optimization through close process control. They offer various installation options like insertion, bypass, or pocket designs and hazardous area approvals. The meters achieve high accuracy and reliability through a vibrating cylinder design and temperature compensation.
Receive information on transformer fault situations with reliable and robust online transmitter. The Vaisala Moisture, Hydrogen and Temperature Transmitter MHT410 for Transformer Oil measures directly from representative transformer oil giving both reliable hydrogen trend as well as fast moisture data.
It is built to last and doesn’t have wearing parts such as membrane, pumps, hoses or batteries. Easy to install, the MHT410 is ready to use within minutes. Continuously monitoring hydrogen and moisture levels with an in-situ probe is the first step in extending the life of a transformer through implementation of predictive maintenance practices leading to lower total cost of ownership.
Jogler is a Baton Rouge, Louisiana manufacturer of high quality Magnetic Level Gauges, Magnetostrictive Transmitters, Direct-Reading Level Gauges with armored shield, Sight Flow Indicators, Specific Gravity Analyzers, Point Level Switches and other accessories. Jogler products are custom designed to meet customer specifications and manufactured to applicable ASME B31.1 and B31.3 code requirements to ensure reliable operation and maintenance free design.
The MGT-6000 is a magnetostrictive level transmitter designed for magnetic liquid level indicators. It uses magnetostriction to measure the position of a magnetic float along a sensing wire, calculating the float position from the time between start and end pulses. Key features include high accuracy, a low-profile waveguide, HART communication, and an explosion proof housing. It can be mounted to most magnetic level indicators and provides a stable 4-20 mA output.
Cameron's CamCor™ PRO Series Coriolis flow meter features high-accuracy, shallow bow-shaped dual sensor tubes and is ideal for oilfield production applications. This industrial process-grade Coriolis flow meter offers high performance for accuracy, repeatability, wide flow range, low pressure loss, and safe design.
Magnetrol TA2 Thermal Mass Flow Meter for Flare Gas ApplicationsMiller Energy, Inc.
Low flow sensitivity means high reliability for flare gas applications. The Thermatel® TA2 thermal dispersion mass flow meter provides reliable mass flow measurement for flare gas applications to comply with monitoring requirements.
Azbil North America recently added the AX series of multivariable vortex flowmeters for industrial process measurement and control to their product offering. The instrument combines temperature, pressure and velocity measurement in a single instrument to provide accurate mass flow measurement of gases, liquids and steam.
The Brooks® Ar-MiteTM is a reliable, low flow metal tube flowmeter with 316L stainless steel wetted parts. The magnetically coupled indicator provides a highly reliable method of indication. This model is a practical and economical approach to low flow rate indication for high pressure and difficult to handle fluids. Optional accessories include 4-20 mA output, Needle Valve, Flow Controllers and Alarms.
The Model PK200 Current-to-Pneumatic Converter:
- Converts a 4-20mA or 10-50mA input current signal to a proportional pneumatic output signal.
- Has adjustable zero and span settings, high accuracy and reliability, and is minimally affected by environmental conditions.
- Is used to actuate pneumatic devices like valves and cylinders, as well as for signal conversion in hybrid instrumentation systems.
The document provides information about the CT2000 Series industrial drives from Delta Textile including:
- Fanless and wall mount installation models for use in harsh environments to prevent fiber/dust buildup.
- Deceleration Energy Backup function to allow smooth motor stopping in the event of a power outage.
- Built-in PLC and RS-485 communication for simple network control without extra modules.
- Modular design with optional communication, I/O, and feedback cards for customization.
- Rated for use in textile, ceramic, glass and other demanding industries.
The document describes the SFY Functional Safety Frequency-to-DC Transmitter with Display. The SFY monitors frequency, period, pulse width, and contact closure signals, converts the input to a 4-20mA output, and is certified up to SIL 3. It is ideal for use in safety instrumented systems for applications involving turbines, flow meters, variable frequency drives, rotating equipment, and more. The SFY offers accurate and stable measurement, easy setup via PC software, and versatile input choices for low frequencies up to high kHz ranges.
This document provides a summary of products offered by TECPEL co., LTD including precision LCR instruments, function generators, multimeters, and environmental testers. Their product line includes oscilloscopes, power supplies, multi-meters, thermometers, and more. They offer quality instruments for testing electric and electronic components across various parameter and application areas.
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Thermo Scientific gas density meters provide continuous, inline monitoring of gas density or density-related variables to detect any variation in process constituents or product quality in real-time. The meters ensure plant efficiency and optimization through close process control. They offer various installation options like insertion, bypass, or pocket designs and hazardous area approvals. The meters achieve high accuracy and reliability through a vibrating cylinder design and temperature compensation.
Receive information on transformer fault situations with reliable and robust online transmitter. The Vaisala Moisture, Hydrogen and Temperature Transmitter MHT410 for Transformer Oil measures directly from representative transformer oil giving both reliable hydrogen trend as well as fast moisture data.
It is built to last and doesn’t have wearing parts such as membrane, pumps, hoses or batteries. Easy to install, the MHT410 is ready to use within minutes. Continuously monitoring hydrogen and moisture levels with an in-situ probe is the first step in extending the life of a transformer through implementation of predictive maintenance practices leading to lower total cost of ownership.
Jogler is a Baton Rouge, Louisiana manufacturer of high quality Magnetic Level Gauges, Magnetostrictive Transmitters, Direct-Reading Level Gauges with armored shield, Sight Flow Indicators, Specific Gravity Analyzers, Point Level Switches and other accessories. Jogler products are custom designed to meet customer specifications and manufactured to applicable ASME B31.1 and B31.3 code requirements to ensure reliable operation and maintenance free design.
The MGT-6000 is a magnetostrictive level transmitter designed for magnetic liquid level indicators. It uses magnetostriction to measure the position of a magnetic float along a sensing wire, calculating the float position from the time between start and end pulses. Key features include high accuracy, a low-profile waveguide, HART communication, and an explosion proof housing. It can be mounted to most magnetic level indicators and provides a stable 4-20 mA output.
Este documento presenta una serie de instrucciones para elegir el animal correcto entre varias opciones, pero no proporciona ninguna información sobre los animales específicos o el contexto de la selección. Sólo repite la frase "Elegí el animal correcto" cinco veces sin dar más detalles.
La quimiosíntesis es la formación de compuestos orgánicos a partir de compuestos inorgánicos que no necesita luz solar y se da en bacterias, mientras que la fotosíntesis utiliza la luz solar, el dióxido de carbono y el agua para producir compuestos orgánicos y oxígeno en organismos con clorofila como las plantas, algas y algunas bacterias.
Victory Energy Firetube Boiler for extreme duty - Frontier SeriesCTi Controltech
By design, the Frontier® Series 3-pass and 4-pass wetback, and now dryback too, boilers are engineered and built for minimum maintenance and maximum output. Wall-to-wall super-structure and rifled tubes ensure years of extreme-duty performance.
Victory Energy utilizes the "latest" burner/control technology available to establish the most dependable operation needed for your specific application.
Western Areas Ltd is an Australian nickel producer that operates mines in the Forrestania region. The presentation provides an overview of the company's operations, financial results, and growth projects. It highlights Western Areas' low-cost production, strong safety record, and organic growth opportunities through exploration and potential development of the Cosmos Nickel Complex. Guidance for 2016 forecasts production of 24,000-25,000 tonnes of nickel in concentrate at a unit cash cost of A$2.25-A$2.45 per pound.
This document provides an overview and agenda for a corporate presentation by Western Areas Ltd. It includes sections on corporate operations, growth and exploration opportunities, and the nickel market. The document notes that Western Areas is a high-grade, low-cost nickel producer with operational cash flow positive at current prices. It has growth potential through near-mine and regional exploration projects as well as opportunities at its Cosmos Nickel Complex. The nickel market discussion indicates that the market is moving from a long period of oversupply to a forecast deficit in 2016, with increasing demand expected from electric vehicles and stainless steel applications.
This corporate presentation by Western Areas provides an overview of the company's operations and financial results. It discusses the company's zero lost time injury rate and strong safety culture. Production and cost metrics for FY2015 are presented, showing marginally higher mill production but lower realized nickel prices, leading to a lower net profit compared to FY2014. The presentation also provides details on the Flying Fox and Spotted Quoll mines, the Forrestania nickel concentrator, and an approved mill recovery enhancement project.
The DT4281 is our top-of-the-line high-precision 60000 count digital multimeter with all of the functions and features required for advanced testing in complex power and electrical applications.
DIGITAL MULTIMETER DT4281/DT4282
Speedy Performance of Professional Testing
Large, easy-to-see display
Optimized for inverter system measurements
Ideal for checking ripple voltage in DC supply systems
Enhance UPS maintenance efficiency
Includes μA DC range for burner system inspection
Data Communications function
https://www.n-denkei.com/singapore/inquiry/
The high performance differential pressure transmitter EJX110A features single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJX110A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.
High performance differential pressure transmitters feature a single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam flow as well as liquid level, density and
pressure. Standard output is a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.
1. This document provides information on the ITVX2000 series high pressure electro-pneumatic regulator including its specifications, operating principles, and safety precautions.
2. The regulator can control air, nitrogen, oxygen, or argon pressure from 0.01 to 3 MPa with a maximum supply pressure of 5 MPa. It has analog and switch outputs for monitoring.
3. The regulator works by using solenoid valves and a built-in regulator to control the pressure in a pilot chamber, which then regulates the air supply valve to maintain a set output pressure proportional to the input signal.
This document summarizes the specifications and features of the ALIASONIC Flange Type Ultrasonic Flowmeter Model AUF760 Series. The AUF760 series is a fixed mounted, transit-time ultrasonic flowmeter with flange end transducers for non-invasive liquid measurement. It features a 4 line LCD display, data logging, pulse output, alarms, RS-232 communication and an accuracy of +/-1% of reading. The flowmeter measures flow velocities from 0.01 to +/- 32 m/s in pipe sizes from 100mm to 1000mm and has a response time of less than 1 second.
This document provides an overview of various electrical measuring instruments from Hioki, organized by product category. It includes power analyzers and power meters for measuring power parameters of inverters, motors, and power grids. It also lists current sensors, power quality analyzers, recorderscopes, memory recorders, wireless data loggers, impedance analyzers, and LCR meters. The models highlighted include high accuracy and high speed devices for applications like testing of batteries, capacitors, motors, and inverters.
Insertion turbine flow meters measure flow of liquid, gas, and
steam by detecting the frequency of rotation of the turbine blades. The frequency of turbine rotation is directly proportional to the flow velocity. Insertion turbine flow meters measure flow by detecting the local velocity within the pipe. The fluid velocity is combined with other parameters to calculate the average pipe velocity and volumetric flow rate.
This document summarizes information about Energoflow AG, a Swiss company that designs, engineers, and manufactures flow metering solutions using ultrasonic technology. It provides details about their team, goals of expertise, efficiency and experience. The company offers a wide range of flow metering products for gas and liquid measuring that cover all flow situations. It describes various flow meter models, technical specifications, sales geography, and certification in compliance with ISO 9001:2015.
Designed for large pipelines with remote communication facilitiesManasMicrosystems
MEGA SROAT is a series of Large Electromagnetic Flow Meters introduced by Manas. The size ranges from 400 mm in diameter to 1600 mm in diameter. These flow meters are very accurate (typically 0.5% of the actual flow rate). The hard ebonite rubber lining makes these meters suitable for the measurement of raw water containing even abrasive sand, quartz particles, mud, etc., and they all deliver long life.
These large flowmeters are popular for big water projects and irrigation projects. this series is also suitable for sewage applications.
Features
Diameters are available from DN400 to DN1000. (Higher Diameters on request)
Extremely suitable for very high flow rate, accurate water metering.
Available in Ebonite lining. Polyurethane on request possible.
High accuracy of measurement like 0.5% of reading.
No Pressure Drop across the sensor, being full bore construction.
Long-lasting Ebonite rubber lining gives the long life to the sensor.
End connection flanges as per customer’s requirements.
Applications
Extremely useful for large water supply schemes.
Suitable for Sewage measurement.
Municipal Water measurement schemes.
Irrigation schemes.
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Offering Services such as conductivity meter,digital process indicator,ph meter,tds meter, PH And ORP Temperature Meter, Conductivity Meter, TDS Meter, Digital Process Indicator, Data Logger, Humidity And Temperature Indicator.
Electromagnetic flowmeters measure liquid flow using Faraday's law of electromagnetic induction. They generate a magnetic field which induces a voltage in conductive liquids proportional to flow velocity. This voltage is measured by electrodes and converted to a standardized output. Key features include a choice of wetted materials, remote or integral transmitter, accuracy from 0.5-1% of measured value, and suitability for pipes 10mm to 600mm handling corrosive or aggressive liquids. They are used in chemical, petrochemical, and other process industries.
The document provides product information for the Proline Promag 10D electromagnetic flowmeter for measuring conductive liquids like water. Key specifications of the Promag 10D include measurement ranges up to 10 m/s, minimum conductivity of 50 μS/cm, operating temperature up to 60°C, accuracy of ±0.5% of reading, and pressure rating up to 16 bar. The document also provides dimensional drawings, electrical connection diagrams, and price tables for ordering the Promag 10D and additional measurement products.
Công ty TNHH Kỹ Thuật Công Nghệ Minh Việt là nhà cung cấp các loại đồng hồ đo lưu lượng khí với giá tốt nhất Việt Nam. Chúng tôi đang phân phối đồng hồ đo lưu lượng khí và các loại phụ kiện được nhập khẩu chính hãng từ các nhà sản xuất hàng đầu trên thế giới như Cosmic Technologies (Ấn Độ), Azbil (Nhật Bản), STS (Thụy Sĩ), và Muesen (Đức).
Uniohm resistors datasheet AEC-Q200 Version Chip Resistors NQ03 Series - allc...Felix Law
This document provides the reliability test results for AEC-Q200 version chip resistors - NQ03 ±1% series resistor manufactured by UNIOHM. 24 different tests were conducted following the AEC-Q200 REV D June 1, 2010 standard. All tests including high temperature exposure, temperature cycling, biased humidity, operational life, and others were passed. The conclusion is that the NQ03 ±1% Series products meet the AEC-Q200 REV D June 1, 2010 standard and specification.
ADCMT DC Voltage Current Source Monitor 6253
Best for development or evaluation of high-precision electronic components
by wide source range and 6½-digit measurement resolution
The DC voltage current source/monitor 6253 is suitable as power source for evaluation of semiconductors and other electronic components and as power source of characteristic systems. In addition to high accuracy, high stability and low noise of our strengths, the 6253 realizes higher precision features such as 5½ digit source resolution, 6½-digit measurement resolution and basis accuracy of ±0.02 %. Furthermore, the 6253 can support various applications by the sweep functions, high-speed pulse source function with a minimum pulse width of 25 μs, the variable integration function and the newly adopted variable slew rate function.
https://www.n-denkei.com/singapore/inquiry/
This document provides information on installing and operating a Turbopulse turbine flowmeter manufactured by Trimec Industries. It includes specifications for the flowmeter models, details on installation such as pipe sizing and orientation, and maintenance procedures. Contact information is provided for Trimec's manufacturing locations and distributors around the world.
Similar to Vortex Gas Flowmeter for Process Measurement (20)
Flowserve Valve, Actuation and Instrumentation PortfolioCTi Controltech
The document is a catalog from Flowserve Corporation that provides an overview of their portfolio of valve, actuation, and instrumentation products. It includes sections that describe their industries and services, product categories like ball valves, butterfly valves, control valves, and actuators. For each product category, it lists relevant product types with brief descriptions. The catalog aims to showcase Flowserve's full range of flow control solutions and support services for readers considering their products.
Check-All Valve manufactures in-line spring-loaded poppet-type check valves, vacuum breakers, and low pressure relief devices. All valves are available with metal to metal or soft seats. Sizes range from 1/8” NPT to 20 inch flanged connections. Pressure ratings are available from full vacuum to 10,000 psi. Special materials available are Titanium, Alloy C-276, alloy 20 and many others. Fluoropolymer (FEP) encapsulated springs are available for special corrosion applications.
The SANITRX HPX & SANITRX HPX II Rupture Discs can be used in a wide range of sanitary and hygienic applications throughout pharmaceutical, biotech, food, and beverage facilities. SANITRX HPX & SANITRX HPX II Rupture Discs are semicircular scored reverse acting rupture discs designed specifically for the pharmaceutical, biotech, food and beverage industries. These rupture discs are available to fit between industry standard sanitary ferrules, NA-CONNECT® flanges or SANITRX fittings.
Continental Disc Corporation is a leading manufacturer of rupture disc (bursting disc) devices for a variety of process industries, including chemical, petrochemical, petroleum refining, pharmaceutical, beverage, food and dairy, aerospace, gases, electronics, and other markets worldwide.
In-line spring-loaded, piston-type check valves. All valves are available with metal to metal or soft seats. Sizes range from 1/8” NPT to 20 inch flanged connections. Pressure ratings are available from full vacuum to 10,000 psi. Special materials available are Titanium, Alloy C-276, alloy 20 and many others.
Specifically Designed for Pharmaceutical, Biotech, Food, Beverage, Consumer Products and other Sanitary and Clean Steam Processes
Unique Adjust-O-Seal® design provides upstream sealing and in-line adjustment for seat wear
Longer life
True-Bore® (valve bore same as connecting tubing or pipe)
Pad radius facilitates efficient drainage and reduces the pocket area above the ball.
Available in API-607 Fire Tested design
Optional Purge port and milled ball flats allow inline CIP to prevent clogging and plug formation
Available in Angle Stem versions for applications where automation may interfere with tank head or jacket.
Combining Rupture Discs and Safety Relief ValvesCTi Controltech
Isolating a relief or safety valve from the process media through the installation of a rupture disc upstream of the valve inlet will eliminate exposure of the costly valve to effects of the media.
Deflagration Flame Arresters are fire safety devices used to protect stored or process media from deflagrations. A deflagration flame arrester can be used on the top of a tank in certain conditions, as an in-line safety device where combustible gases are transported through low pressure pipe lines.
The Williams & Davis Series 2000D is a classic 2-pass, dry-back horizontal firetube boiler that offers high efficiency, flexibility, reliability, safety and ease of operation. The Dryback design provides full access to boiler tubes, tube sheet, and furnace for ease of maintenance and includes single rear tube sheet construction, which reduces tube sheet stresses. Series 2000D provides high flue gas velocities and low stack temperatures to maximize its performance. All units are factory fire tested and shipped as an integrated package, ready for quick connection to utilities.
Flowserve, under their Valtek brand, developed a control valve that combines a number of useful design features. The MaxFlo 4 is an eccentric rotary plug valve intended for fluid control operations. The valve has some attractive design features.
Atomac valves provide bubble-tight shutoff, low maintenance, no-leak stem seals and the safety assurance of a blowout-proof stem assembly. LIned ball valves deliver high levels of corrosion resistance.
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
Rupture Disc Products For Industrial Process SafetyCTi Controltech
Built on years of research and development, the HPX® and SANITRX HPX® Rupture Discs (bursting discs) are high precision pressure relieving devices that protect personnel, equipment and the environment. The versatility of the HPX® product family offers pressure protection for a wide range of applications in many processing industries, including: chemical, oil and gas, food, beverage, pharmaceutical, biotech, pulp and paper, power and more.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
CMA range modulating actuators deliver a series of sizes suitable for linear, quarter-turn and rotary control valve and pump applications requiring precise position control and continuous modulation.
The Rotork CMA Range provides for simple, safe and easy set-up via an internal electronic 6-segment LCD display and push button configuration.
Kammer valves are designed to handle a wide range of service conditions: pressures from vacuum to 6000 psi and temperatures from minus 500° F to plus 752° F. Body materials include all common stainless steels, in addition to plastics and exotic alloys. Kammer valves are also applicable in applications that require zero stem leakage. When equipped with bellows seals, Kammer valves reliably eliminate the threat of fugitive emissions or toxic/corrosive leakage.
Electric Control Valve Actuators for Industrial Process ApplicationsCTi Controltech
The Rotork CVA line of electric process control actuators offers a highly accurate and responsive method of automating control valves, without the complexity and cost of a pneumatic supply. With an increased focus on production costs and efficiency, accurate control of product through the pipeline is paramount. With resolution figures better than 0.1% and the ability to eliminate position overshoot, the Rotork CVA models help to maximize product quality and plant capacity.
Electronic Line Break Protector for Fluid SystemsCTi Controltech
The ELB is an electronic pipeline monitoring system that detects pipeline breaks by continuously monitoring pressure. It will automatically move a valve actuator if pressure changes exceed thresholds. The ELB collects operational data and can be configured to meet various requirements. It has extensive alarm, control, and data logging capabilities to enhance pipeline safety and optimize performance.
Integrated Flame Scanner For Commercial and Industrial Combustion OperationsCTi Controltech
Fireye® provides a variety of flame scanners which accurately detect the presence or absence of flame in a combustion chamber. Scanners include advanced sensors and algorithms that can discriminate a target burner from adjacent flames in the same combustion chamber. Scanners can be used with all fuel types and burner configurations. InSight Scanners® and Phoenix families are integrated designs which include all the appropriate detection and amplification circuity in one compact unit.
Controlling Cavitation in Industrial Control ValvesCTi Controltech
Cavitation, in process control valves, refers to the formation of vapor spaces or bubbles within the valve cavity resulting from a rapid drop in pressure as liquid passes through the valve. When the bubbles transit to an area of higher pressure, the higher pressure causes the bubbles to implode, producing shockwaves which propagate through the liquid. These shockwaves can cause metal fatigue and excessive wear on the internals of the valve. The collapsing bubbles also make a discernible sound with accompanying vibration.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Embedded machine learning-based road conditions and driving behavior monitoring
Vortex Gas Flowmeter for Process Measurement
1. The MVF series of Micro Flow vortex gas flowmeters make use of
our proprietary μF (Micro Flow) sensor, which has high sensitivity
and quick response. As a result, MVF flowmeters achieve a wide
measurement range of 100:1.
In addition, a temperature and pressure compensation function is built
in, so there is no need for a temperature sensor, pressure sensor, or
compensation device, contributing to the reduction in total cost.
Model No. configuration Ex.: MVF0500CUN0110000
Basic
model No.
MVF
Gas type
N
S
C
G
P
B
Connection
U
D
A
Power
supply
1
Communi-
cation
1
Output
0
Pipe size
050
080
100
150
Micro Flow vortex gas flowmeter
50 A (2B)
80 A (3B)
100 A (4B)
150 A (6B)
With temperature & pressure compensation
Without pressure compensation, with temperature compensation
Low pressure range (0 to 0.1 Mpa),
with temperature & pressure compensation
Medium pressure range (0 to 0.3 Mpa),
with temperature & pressure compensation
Main unit material SCS13A
Wafer connection (with spacer for JIS 10K flange)
Wafer connection (with spacer for DIN PN10 flange)
Wafer connection (with spacer for ANSI 150 flange)
Air/nitrogen, argon
Oxygen (degreasing must be selected)*1
Carbon dioxide gas
City gas 13 A (LNG base), methane
Propane
Butane
With 4 to 20 mA output + pulse output
24 Vdc power supply
RS-485 communication
Horizontal left to right flow, converter on top*2
Horizontal left to right flow, converter on bottom*2
Horizontal right to left flow, converter on top*2
Horizontal right to left flow, converter on bottom*2
Vertical below to above flow, converter on left*2
Vertical above to below flow, converter on left*2
None
Degreasing of gas-contacting parts (necessary if fluid is oxygen)*1
None
Mill sheet for main unit and vortex generator
Product version
Model
0
L
1
3
Material
C
DescriptionDirection
0
1
2
3
4
5
Option 1
0
1
Option 2
0
C
Appended
No.
0
*1. If oxygen (“S”) is selected, be sure to select “1” (Degreasing of gas-contacting parts) for Option 1.
*2. Explanation of flow direction
Specifications
Model No.
Pipe size
Gas types
Operating temperature range
Operating pressure range,
pressure sensor accuracy
Rated power supply voltage
Output signal (1)
Integrated pulse output (1)
Communication function
Gas-contacting material
Connection type
Pipe size
Protective structure
Weight
MVF050 MVF080 MVF100 MVF150
50 A 80 A 100 A 150 A
Air, nitrogen, argon, oxygen, carbon dioxide (CO2), city gas (13 A), methane, propane, butane, and other inert gases and mixed gases outside the explosion limit range
-15 to +60 °C
Model No.: MVF 1C 011 00: 0.0–0.1 MPa, ±2% FS @23 °C
Model No.: MVF 3C 011 00: 0.0–0.3 MPa, ±2% FS @23 °C
Model No.: MVF 0C 011 00: 0.0–1.0 MPa, ±1% FS @23 °C
24 Vdc. Operating range: 24 Vdc±10%, 100 mA or less
Instantaneous flow rate output: 4 to 20 mAdc (allowable load resistance 600 Ω max.), maximum current: 23.2 mA, approx. 3.5 mA downscale output during burnout
Open collector output, contact rating: 10 to 30 Vdc, 20 mA or less, pulse weight: selectable from 0.1, 1, and 10 m3
/pulse
RS-485 interface, 3-wire system
Flow passage: SCS13A, SUS304. μF sensor: silicon, gold, etc. O-ring: type 4D (Viton).
JIS 10K wafer connection
50 A (2B) 80 A (3B) 100 A (4B) 150 A (6B)
IP67 (by JIS C 0920 and IEC 529 standards, watertight structure for the assumed outdoor installation)
6.3 kg 6.6 kg 9 kg 17 kg
Left to right flow Flow direction: below to above Right to left flow Flow direction: above to below
Converter is above
Code 0
Converter is below
Code 1
Converter is on the left
Code 4
Converter is above
Code 2
Converter is below
Code 3
Converter is on the left
Code 5
[Explanation of terms] % rdg: percentage of the reading. m3
/h (normal): indicates a value converted to volumetric flow per hour at 0 °C and 101.325 kPa (1 atmosphere).
Specification method
(1) 4 to 20 mA span
After checking the measurement range for each pressure,
specify the model.
Maximum span specifications m3
/h (normal)
(2) Pulse weight
50 A: 0.01, 0.1, 1, 10 m3
/pulse
Other than 50 A: select from 0.1, 1, 10, and 100 m3
/pulse.
Sample specification
Model No. MVF0800CUN0112000
Range 0 to 500 m3
/h (normal)
Pulse weight 1 m3
/pulse
50 A
80 A
100 A
150 A
8000 m3
/h (normal)
16000 m3
/h (normal)
24000 m3
/h (normal)
48000 m3
/h (normal)
The minimum span specification is 1% of the maximum span
specification.
Micro Flow Vortex Gas Flowmeter MVF Series
7-15
1
DIGITAL
CONTROLLERS
2
RECORDERS,
INDICATORES
3
CONVERTERS
4
FLAMESAFEGUARD
SYSTEM
5
ACTUATORS
6SENSORS
7
GASFLOW
MEASUREMENTAND
CONTROLPRODUCTS
GAS FLOW MEASUREMENT AND CONTROL PRODUCTS