The AX Series of Vortex inline flowmeters measure flows of liquid, gas, and steam by measuring the rate at which vortices are alternately shed from a bluff body; this rate has been shown to be directly proportional to the flow velocity.
As flow passes a bluff body in the stream, vortices create pressure differentials which are measured by a piezoelectric crystal sensor, which converts these pulses into electrical signals. The meter uses an all-welded sensor design to create a strong unit and minimize potential leakage.
The AX Series can be configured to measure anything from simple volumetric flow of liquids and saturated steam up through multivariable measurements, including mass flow rate, pressure, temperature and density of liquids and steam.
Insertion style vortex meters measure fl ow by detecting the local velocity at a strategically located position within the pipe. Using local velocity, calculated by measuring the rate at which vortices are alternately shed from a bluff body within the sensor, the AX2300 uses parameters such as fluid type, pipe size, and Reynolds number to calculate accurate measurements.
Pulp and paper applications create a notoriously harsh, high moisture and chemical-laden environment; coupled with extreme vibration in many of the processes. The following document outlines an array of level, pressure, and position applications and solutions for the pulp & paper industry.
Inline and Insertion models of the Azbil Multivariable Vortex Mass Flow Meters employ three sensing elements in a single meter; a vortex shedding velocity sensor, an RTD temperature sensor, and a solid state pressure transducer. This unique combination allows accurate mass flow measurements of gases, liquids and steam.
Azbil North America recently added the AX series of multivariable vortex flowmeters for industrial process measurement and control to their product offering. The instrument combines temperature, pressure and velocity measurement in a single instrument to provide accurate mass flow measurement of gases, liquids and steam.
The AX Series of Vortex inline flowmeters measure flows of liquid, gas, and steam by measuring the rate at which vortices are alternately shed from a bluff body; this rate has been shown to be directly proportional to the flow velocity.
As flow passes a bluff body in the stream, vortices create pressure differentials which are measured by a piezoelectric crystal sensor, which converts these pulses into electrical signals. The meter uses an all-welded sensor design to create a strong unit and minimize potential leakage.
The AX Series can be configured to measure anything from simple volumetric flow of liquids and saturated steam up through multivariable measurements, including mass flow rate, pressure, temperature and density of liquids and steam.
Insertion style vortex meters measure fl ow by detecting the local velocity at a strategically located position within the pipe. Using local velocity, calculated by measuring the rate at which vortices are alternately shed from a bluff body within the sensor, the AX2300 uses parameters such as fluid type, pipe size, and Reynolds number to calculate accurate measurements.
Pulp and paper applications create a notoriously harsh, high moisture and chemical-laden environment; coupled with extreme vibration in many of the processes. The following document outlines an array of level, pressure, and position applications and solutions for the pulp & paper industry.
Inline and Insertion models of the Azbil Multivariable Vortex Mass Flow Meters employ three sensing elements in a single meter; a vortex shedding velocity sensor, an RTD temperature sensor, and a solid state pressure transducer. This unique combination allows accurate mass flow measurements of gases, liquids and steam.
Azbil North America recently added the AX series of multivariable vortex flowmeters for industrial process measurement and control to their product offering. The instrument combines temperature, pressure and velocity measurement in a single instrument to provide accurate mass flow measurement of gases, liquids and steam.
Cameron's CamCor™ PRO Series Coriolis flow meter features high-accuracy, shallow bow-shaped dual sensor tubes and is ideal for oilfield production applications. This industrial process-grade Coriolis flow meter offers high performance for accuracy, repeatability, wide flow range, low pressure loss, and safe design.
The Martel CSI-30 and CSI-100 digital calibrators are designed to test instrumentation field of pneumatic valve actuators including, P / I transmitters, controllers, meters, switches, and recorders.
Fluke Data Acquisition System Selection Guide. Hubungi PT. Siwali Swantika 02...PT. Siwali Swantika
Datasheet Fluke 1586A Super-DAQ. Datasheet Fluke 2638A Hydra Series III. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
BOD measurement biox bod measurement datasheet endress+hauserENVIMART
BOD measurement biox bod measurement datasheet - Endress+Hauser - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
The world's first two-wire Multi-variable Type (with built-in temperature sensor) can directly output the mass flow rate of saturated steam.
The digitalYEWFLO vortex flowmeter combines the field proven sensor and body assembly used in more than 260,000 units installed worldwide with a unique and powerful combination of digital technology that includes spectral signal processing (SSP), a Yokogawa innovation. The digitalYEWFLO vortex flowmeter is accurate and stable, even in harsh process conditions, and has a highly reliable and robust design that delivers improvements in plant efficiency and reduced operating costs.
Cameron's CamCor™ PRO Series Coriolis flow meter features high-accuracy, shallow bow-shaped dual sensor tubes and is ideal for oilfield production applications. This industrial process-grade Coriolis flow meter offers high performance for accuracy, repeatability, wide flow range, low pressure loss, and safe design.
The Martel CSI-30 and CSI-100 digital calibrators are designed to test instrumentation field of pneumatic valve actuators including, P / I transmitters, controllers, meters, switches, and recorders.
Fluke Data Acquisition System Selection Guide. Hubungi PT. Siwali Swantika 02...PT. Siwali Swantika
Datasheet Fluke 1586A Super-DAQ. Datasheet Fluke 2638A Hydra Series III. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
BOD measurement biox bod measurement datasheet endress+hauserENVIMART
BOD measurement biox bod measurement datasheet - Endress+Hauser - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
The world's first two-wire Multi-variable Type (with built-in temperature sensor) can directly output the mass flow rate of saturated steam.
The digitalYEWFLO vortex flowmeter combines the field proven sensor and body assembly used in more than 260,000 units installed worldwide with a unique and powerful combination of digital technology that includes spectral signal processing (SSP), a Yokogawa innovation. The digitalYEWFLO vortex flowmeter is accurate and stable, even in harsh process conditions, and has a highly reliable and robust design that delivers improvements in plant efficiency and reduced operating costs.
EL-FLOW Prestige is the next generation of Bronkhorst Mass Flow Meters / Controllers for gases. Nearly all core components have been redesigned and many improvements and innovations have been incorporated. With this new series Bronkhorst introduced the “Differential Temperature Balancing” technology, ensuring a superb sensor stability.
Process control Solutions (PCS) offers the finest selection of Industrial Instrumentation and Control products in the world, and is uniquely qualified to provide application / technical support, installation and calibration services and product selection from an extensive line of industries.
Cox Precision metering products by Badger Meter provide flow measurement solutions for the test and measurement market and precision industrial applications.
Insertion turbine flow meters measure flow of liquid, gas, and
steam by detecting the frequency of rotation of the turbine blades. The frequency of turbine rotation is directly proportional to the flow velocity. Insertion turbine flow meters measure flow by detecting the local velocity within the pipe. The fluid velocity is combined with other parameters to calculate the average pipe velocity and volumetric flow rate.
The Brooks® Ar-MiteTM is a reliable, low flow metal tube flowmeter with 316L stainless steel wetted parts. The magnetically coupled indicator provides a highly reliable method of indication. This model is a practical and economical approach to low flow rate indication for high pressure and difficult to handle fluids. Optional accessories include 4-20 mA output, Needle Valve, Flow Controllers and Alarms.
Prominent trader of a high quality range of Gas Chromatography, Spectrophotometer, Viscometer, Micro - Ultra Micro Balances, Semi Micro Balance, Analytical Balance, High Precision Balance, Precision Balances, Industrial Balance & Scales, Moisture Analyzer, etc.
Incorporated in the year 2013, at Mumbai(Maharashtra, India), we “K Tek Analytics” are known as the prominent trader of a high quality range of Gas Chromatography, Spectrophotometer, Viscometer, Micro - Ultra Micro Balances, Semi Micro Balance, Analytical Balance, High Precision Balance, Precision Balances, Industrial Balance & Scales, Moisture Analyzer, etc.These products are manufactured by our reliable vendors’ in their state-of-the-art manufacturing unit using optimum quality components and cutting-edge technology in adherence to international quality standards. Owning to features such as high accuracy, robust design, easy installation, optimum functionality and longer working life, these products are widely demanded. Furthermore, the offered range of products can be availed in various technical specifications at reasonable prices.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
2. We are a Swiss company devoted to design, engineering and
manufacture of flow metering solutions and related products
based on the ultrasonic technology.
Who We are?
3. We strive to provide state-of-the-art, cost effective turnkey technical solutions
to our valued clients throughout the world for fluid measurement and
monitoring in related fields across a wide range of industries and applications.
Goal
4. Experience, Expertise & Efficiency!
Our compact team of EXPERIENCED professionals with a vast global exposure is
dedicated to provide the best answer to client's requirements based on our
EXPERTISE, and our business practices and management concepts are aimed to
provide the highest degree of EFFICIENCY.
Energoflow AG can provide the optimal solution to all your flow metering
requirements – the wide range of our products covers all the feasible fluid flow
situations. And if you have an unusual, out of the way case – just contact us with
the details! We love challenges and our team of Engineers will be just too happy
to provide the exact flow meter corresponding to your requirements.
Our mission
5. ISO 9001:2015
Our company is certified in compliance with ISO 9001:2015
Energoflow AG has successfully implemented all the
aspects of the latest ISO 9001:2015 edition
Main vectors of development policy:
- Normative references
- Terms and definitions
- Context of the organization
- Leadership
- Planning
- Support
- Operation
- Performance evaluation
- Improvement
6. We Design and Manufacture
the Full Range of Solutions for Gas Measuring
Expertise Efficiency Experience
- Domestic Gas Meters (G1,6…G6)
- Gas Meters for Housing & Public Utility (G16, G40)
- Multichannel Ultrasonic Gas Flow Meters (G100…G 25 000)
- Reference Rotary & Turbine Meters (G2,5…G16, G100…G10 000)
- Calibration & Proving Rigs (Air/Natural Gas, G100-G2 500)
- Measuring Skids
7. We Design and Manufacture
the Full Range of Solutions for Liquid Measuring
Expertise Efficiency Experience
- Stationary Liquid Flow Meters
- Portable Liquid Flow Meters
- Doppler Flow Meters
- Liquid Flow Meter LF-131H for High Pressure Applications
- High Accuracy 5 Channel Liquid Flow Meter LF-505
8. Sales Geography
Expertise Efficiency Experience
- China
- India
- The UAE
- Kenya
- Kazakhstan
- Algeria
- Turkmenistan
- Uzbekistan
- Baltic States
9. Energoflow LF
The Energoflow AG LF series
Parameter Clamp-on sensors
Inserted
sensors
Inner diameter of the
pipeline, mm
70…3200 25…4000
Accuracy of flow
measurement, %
± 1,0; ± 1,5 ± 1; ±(0,5)
Range of flow velocity
measurement, m/s
0,1 -10 0,1 -10
Range of operating
temperatures for the
sensors, °C
- 20...120(250) - 20...150
Range of operating
temperatures for the
electronic unit,°C
- 20...60(75) - 20...60(75)
Range of operating
temperatures for PSU,°C
5... 50(75) 5... 50(75)
Supply voltage, V 230; 11…24 220; 11…24
Required power is not more,
W
10 10
10. Energoflow LF-2P2
Portable Ultrasonic Liquid Flow Meter
Parameter Value
Pipe inner diameter, mm 70…3200
Accuracy of flow measurement, % ± 1,0; ± 1,5
Range of flow velocity measurement,
m/s
0,1 -10
Range of operating temperatures for
the sensors, °C
- 20...120
Range of operating temperatures for
the electronic unit,°C
- 20...45
Relative error of flow rate and volume
measurement, mm
± 0,2
Supply voltage, V 230 or 5
Required power is not more, W 6
11. Energoflow LF
Doppler flow meter
Parameter Value
Pipe inner diameter, mm 40-1600
Accuracy of flow measurement, % 2
Range of flow velocity measurement,
m/s
0,1 -6
Range of operating temperatures for
the sensors, °C
- 20...100
Supply voltage, V 230 or 12
Required power is not more, W 5
Distance between sensors and
electronic unit, m, not more
70
12. PIG DETECTOR
Energoflow ULIS-A
Parameters of the indicator Value
Diameter of the pipeline, mm 150 – 1200
Pig device velocity in the pipeline, km/h 1 – 8
Length of the device of clearing, m 1 – 2
Ambient temperature - 40 … +60 °C
Voltage of device 220 V, 50 Hz
Power consumption, Wt, no more 6
1. "Dry contact" "Event" 30V, 200mÀ
2. "Dry contact" "Fuse" 30V, 200mÀ
3. Current output 4 – 20 mÀ
4. Serial interface RS-232/RS485
Distance from the gauge up to the
electronic block, m, no more
150
Certification
Sensor:
II 2G Ex ib IIB T4,
Electronics block :
II (2)G [Ex ib] IIB
15. Energoflow GFA 202
2-Path Ultrasonic Flow Meter
Energoflow GFA 202 with autonomous power supply
Minimal diameter (DN)
from 50 to 300 mm (400 mm
under special order)
Measurement range of gas
flow velocity
from 0,15 to 40 m/s
Number of channels 2
Operating gauge pressure
1,6 MPa; 6,3 MPa, 10 MPa and
16 MPa
Limits of permissible relative error:
from Qt to Qmax ± 1%
from Qmin to Qt (included) ± 2%
16. Reference Rotary Meter EFS-R
Reference Rotary Gas Meter EFS-R
DN
Standard
size
Qmax, m3/h Qmin, m3/h
25 G 16 25 1,25
25 G 10 16 0,53
20 G 2,5 4 0,2
Parameters Value
Measuring medium air
Operating pressure, MPa 1,6; 4,0; 6,3
Limits of basic relative permissible error,
not worse %
± 0,2
Repeatability , at least % ± 0,03
Repeating accuracy within 2 years, at least
%
± 0,1
17. Reference Turbine Gas Meter EFS-T
Reference Turbine Gas Meter EFS-T
DN
Standar
d size
Qmax,
m3/h
Qmin,
m3/h
400 G6500 10000 500
400 G4000 6500 325
300 G4000 6500 325
250 G2500 4000 200
200 G1600 2500 125
150 G1000 1600 80
100 G400 650 35
80 G250 400 20
50 G100 160 8
Parameters Value
Measuring
medium
Air, gas
Operating
pressure, MPa
1,6; 4,0;
6,3
Limits of basic
relative
permissible error,
not worse %
± 0,2
Repetition, at least
%
± 0,03
Repeating
accuracy within 2
years, at least %
± 0,1
18. Calibration and Proving Rigs for Gas Flow Meters
Parameter
Proving
Rigs for Gases
Capacity (m3/h) 250, 600, 1200, 2500, 10000
DN of calibrated flow meters
DN (40, 50, 80, 100, 150,
200,250, 300, 400)
Type of calibrated flow meters
Ultrasonic, Turbine,
Rotary, Vortex
Relative Accuracy ±0,15%; ±0,3%
Measurement,method
Comparison
with standard flow meter
Operating environment Air / natural gas
Quantity of reference flowmeters 2,3,4,5
Accuracy of temperature
measurement
± 0,06%
Accuracy of pressure measurement ± 0,075%
19. Residential Gas Meter HORN
Parameters, units G 1.6 G2.5 G4 G6
Threshold gas flow rate
Qthr, m3/h
0.003 m³/h 0.008 m³/h
Min. gas flow rate Qmin,
m3/h
0.016 m³/h 0.04 m³/h
Transitional gas flow rate Qt,
m3/h
0.25 m³/h 0.6 m³/h
Max.gas flow rate Qmax,
m3/h
2.5 m³/h 4 m³/h 6.5 m³/h 10 m³/h
Q max/Q min 160 250 160 250
Gas Meter HORN
20. Domestic Gas Meter HORN
IP67 certified Gas Meter HORN
can be mounted both in
horizontal or vertical positions
Residential Gas Meter
HORN G1.6…G6
The ability of the indicator and
the housing to be rotated 270
o
in two planes
21. Residential Gas Meter HORN
DATA ACQUISITION SYSTEM
Based on LoRaWANTM
Technology
The Data Acquisition System requires a minimum number of
concentrators making the network very cost-effective