Visions for ETSAP-TIAM
•
1 like•283 views
The document summarizes an agenda for a TIAM Update Workshop meeting. The key agenda items included: 1) A TIAM input session to discuss strengths, weaknesses, opportunities and threats (SWOT) and options for selecting regions in the TIAM model. 2) A TIAM update session to go through timelines, workflow dependencies and goals for the meeting including making a final decision on region selection, identifying tasks and assigning leads/deadlines, beginning discussion on updating subregional energy systems (subRES) and starting the base year update. 3) Links were provided to documents on the SWOT analysis, region selection options and a task breakdown/planning document for the TIAM update. The meeting aimed
Report
Share
Report
Share
Download to read offline
Recommended
Spot trading profits of electricity storage systems in the region covered by ...
Powerpoint presentation for conference AIEE Energy Symposium, Rome 2017
Authors: Maria Kaninia, Constantinos Papalucas
Are you interested in source data, Python/Pyomo scripts or results?
The authors would be glad to share. Please contact maria.ev.kaninia at gmail dot com
Ingeteam participates in round table on Power Transfer and Conversion
Igor Larrazabal, our Medium Voltage Platform Manager, participated in the round table discussion on Power Transfer and Conversion in the 'Advanced Manufacturing for Energy Applications in Harsh Environments' workshop on Industrial Challenges & Technology Roadmap. Brussels, 27 January 2016. Download the presentation.
Integrating probabilistic assessment of security of electricity supply into l...
Integrating probabilistic assessment of security of electricity supply into long-term energy planning exercises: an automated-data-linking modeling approach
Power systems reliability assessment in prospective analyses
Power systems reliability assessment in prospective analyses: the case of France under ambitious renewable energy penetration scenarios
54 paul gibbs_helioscope
This document discusses design optimization in HelioScope, a cloud-based solar design and modeling tool. It begins with an overview of HelioScope and its capabilities for layout, energy yield calculation, and financial analysis. Various design optimization techniques in HelioScope are then described, including shading analysis, row spacing optimization, azimuth optimization, and wiring optimization. Research results are also presented on topics like shade tolerance, effects of tilt angle, and east-west racking. The document concludes with an update on new and upcoming functionality in HelioScope.
Emission impacts of marginal electricity demand in France
This document summarizes research on estimating the carbon dioxide (CO2) emissions impacts of marginal electricity demand increases in France out to the year 2050. The research combined a bottom-up model of future electricity demand with a TIMES model of France's electricity supply system. Preliminary results for one scenario showed CO2 intensities of electricity could reach up to 300 gCO2/kWh by 2050, varying seasonally and hourly. Applying a carbon tax reduced CO2 intensities and even led to negative emissions some hours as biomass with carbon capture and storage displaced other generation. The analysis highlighted the need to better represent plant dynamics and interactions to accurately assess hourly CO2 impacts.
Automatic agriculture assistance
This document describes an automatic agriculture assistance system that uses autonomous vehicles guided by GPS navigation to help farmers cultivate crops on a large scale. The system uses commercial tractors outfitted with encoders, ultrasonic sensors, an onboard computer and PLC controller. The vehicle's motion is controlled through parameters like driving speed and steering angle. A Kalman filter is used to estimate the vehicle's state based on encoder readings and reduce errors between the actual and planned paths. The system is intended to help save farmer's time and money during crop cultivation.
Case study FCC model with integrated energy and yield
This document summarizes a case study presented by KBC/Petronas at a technology workshop on integrating energy and yield modeling. The case study examined how variations in cooling water temperature impacted the energy usage and yield of an FCC unit. The FCC unit was constrained by its wet gas compressor, driven by a steam turbine. The combined process and utility model showed that while a lower cooling water temperature only reduced energy costs slightly, it improved the FCC yield substantially, resulting in $10.4 million more in annual profit despite higher energy usage. The conclusions were that energy systems have a large impact on both costs and process performance, and that KBC's integrated modeling approach provides a unified view of these interactions.
Recommended
Spot trading profits of electricity storage systems in the region covered by ...
Powerpoint presentation for conference AIEE Energy Symposium, Rome 2017
Authors: Maria Kaninia, Constantinos Papalucas
Are you interested in source data, Python/Pyomo scripts or results?
The authors would be glad to share. Please contact maria.ev.kaninia at gmail dot com
Ingeteam participates in round table on Power Transfer and Conversion
Igor Larrazabal, our Medium Voltage Platform Manager, participated in the round table discussion on Power Transfer and Conversion in the 'Advanced Manufacturing for Energy Applications in Harsh Environments' workshop on Industrial Challenges & Technology Roadmap. Brussels, 27 January 2016. Download the presentation.
Integrating probabilistic assessment of security of electricity supply into l...
Integrating probabilistic assessment of security of electricity supply into long-term energy planning exercises: an automated-data-linking modeling approach
Power systems reliability assessment in prospective analyses
Power systems reliability assessment in prospective analyses: the case of France under ambitious renewable energy penetration scenarios
54 paul gibbs_helioscope
This document discusses design optimization in HelioScope, a cloud-based solar design and modeling tool. It begins with an overview of HelioScope and its capabilities for layout, energy yield calculation, and financial analysis. Various design optimization techniques in HelioScope are then described, including shading analysis, row spacing optimization, azimuth optimization, and wiring optimization. Research results are also presented on topics like shade tolerance, effects of tilt angle, and east-west racking. The document concludes with an update on new and upcoming functionality in HelioScope.
Emission impacts of marginal electricity demand in France
This document summarizes research on estimating the carbon dioxide (CO2) emissions impacts of marginal electricity demand increases in France out to the year 2050. The research combined a bottom-up model of future electricity demand with a TIMES model of France's electricity supply system. Preliminary results for one scenario showed CO2 intensities of electricity could reach up to 300 gCO2/kWh by 2050, varying seasonally and hourly. Applying a carbon tax reduced CO2 intensities and even led to negative emissions some hours as biomass with carbon capture and storage displaced other generation. The analysis highlighted the need to better represent plant dynamics and interactions to accurately assess hourly CO2 impacts.
Automatic agriculture assistance
This document describes an automatic agriculture assistance system that uses autonomous vehicles guided by GPS navigation to help farmers cultivate crops on a large scale. The system uses commercial tractors outfitted with encoders, ultrasonic sensors, an onboard computer and PLC controller. The vehicle's motion is controlled through parameters like driving speed and steering angle. A Kalman filter is used to estimate the vehicle's state based on encoder readings and reduce errors between the actual and planned paths. The system is intended to help save farmer's time and money during crop cultivation.
Case study FCC model with integrated energy and yield
This document summarizes a case study presented by KBC/Petronas at a technology workshop on integrating energy and yield modeling. The case study examined how variations in cooling water temperature impacted the energy usage and yield of an FCC unit. The FCC unit was constrained by its wet gas compressor, driven by a steam turbine. The combined process and utility model showed that while a lower cooling water temperature only reduced energy costs slightly, it improved the FCC yield substantially, resulting in $10.4 million more in annual profit despite higher energy usage. The conclusions were that energy systems have a large impact on both costs and process performance, and that KBC's integrated modeling approach provides a unified view of these interactions.
Power Electronics Projects Using MATLAB Research Help
MATLAB Power Electronics Ideas
Major Features in Power Electronics
Support of Modern MATLAB Projects
8 seeking synergies - data modeling & aerial inspections rob andrews
8 seeking synergies - data modeling & aerial inspections rob andrewsSandia National Laboratories: Energy & Climate: Renewables
This document discusses using aerial infrared imaging and data analysis to identify module-level faults in photovoltaic power systems. It compares aerial infrared imaging to traditional manual inspection techniques and data-only analysis. Case studies show aerial imaging can detect more faults than manual checks or data analysis alone. The document recommends combining aerial imaging with periodic on-site inspections and I-V tracing of sample strings to optimize fault detection over time. It concludes aerial imaging provides multiple benefits including increased system output and lower operation and maintenance costs.Project poster
The document summarizes a project to build energy models of two campus buildings - AET Building and BSB Building - and validate the models' results with actual building data. It describes modeling the buildings' geometry, mechanical systems, occupancy schedules, and plug loads. The models will help estimate future electricity and heating/cooling loads to inform energy management decisions. Future work may involve more complex control schedules and ideas to improve energy efficiency.
TEUI Statistics Overview
This document provides an overview of how to use TEUI statistics tools to import map unit polygons and field points, select traits to update statistics for, and view the resulting map unit trait reports, field point reports, charts for individual map units and trait comparisons. It outlines the steps to import data, update statistics, and view the various reports and charts generated from the statistical analysis.
Smart Data Center Design
SimScale is joined by NDC-GARBE Data Centers to explore the energy demands of the rapidly expanding data center industry. With sustainability as a key objective, NDC-GARBE uses high-fidelity, cloud-based simulation to design for optimal thermal management in their facilities. This presentation demonstrates how SimScale's CFD platform can enable data center simulation and validate designs for improving energy efficiency and data center cooling strategies.
OPAL-RT RT14 Conference: Power system generation management
The document summarizes a presentation given at the 7th International Conference on Real-Time Simulation Technologies in Montreal from June 9-12, 2014. The presentation was given by Frank Kling and Vahid Jalili-Marandi from ETAP and OPAL-RT and discussed power system generation management using ePHASORsim real-time simulation software and ETAP's automatic generation control toolbox. The presentation included an introduction, information about ETAP and OPAL-RT, a demonstration of an end-to-end real-time simulation using the two softwares, and a question/answer session.
7 simulation, construction, operation, & back again - how operational d...
7 simulation, construction, operation, & back again - how operational d...Sandia National Laboratories: Energy & Climate: Renewables
The document discusses optimizing photovoltaic (PV) plant management through operational feedback loops. It describes how operational data from PV plants, including performance testing and monitoring, can be analyzed and used to inform and improve future PV design, engineering, and construction. Specific metrics like performance ratio, soiling effects, clipping losses, and differences between modeled versus actual outputs are evaluated. Analysis of data from over 279 megawatts of PV capacity across different sites, inverters and modules is presented. The goal is to better calibrate PV models and simulations based on real-world operational experience to enhance design processes and reduce performance risks.Session 6 project economics
This document summarizes key aspects of project economics for renewable energy projects, including:
- Cost components such as capital, production, financing options, and typical capital/production costs.
- Factors that can introduce uncertainty, such as multi-year timelines, and methods to estimate costs with uncertainty.
- Payback considerations for investors seeking a 3-4 year payback and sustainability metrics like energy payback ratio.
- How regulators view projects based on estimating annual revenue needs to cover fixed charges and operating costs.
- How externalities like a carbon tax would impact the busbar cost of a coal plant as an example.
VEDAViz for ETSAP partners
This document discusses using modeling to gain insights rather than just numbers. It suggests running a large number of scenario combinations to identify tipping points and make the model solutions available to stakeholders. It introduces VEDAViz, a tool for exploring and sharing model results intuitively across different technical levels. VEDAViz allows filtering scenarios, configuring dimensions on charts, and visualizing a dense set of scenarios to turn the model into an "expert system" for policymakers.
Poster s4 4 nita - luminita nuclear 2021. ppt
This document discusses the design of a passive safety system for CANDU6 nuclear power plants to provide safety for 72 hours during a station blackout accident. The proposed system is based on the ALFRED LFR reactor project and uses isolation condensers to provide long-term passive heat removal without active systems. Modeling with RELAP5 is being used to validate the design of the isolation condenser system and natural circulation capabilities. Engineering design by CITON is also being done in parallel to develop specifications and layouts. The goal is to provide full passive safety for 72 hours compared to the current 23 hour capability at Cernavoda plant through cooperation between modeling and engineering design of the new isolation condenser system.
Virtual Commissioning and Real-Time Training for Increasing Performance
This presentation discusses the gas conversion of an existing coal power plant and how using a high-fidelity simulator for virtual commissioning can increase plant performance and profits.
A framework for dynamic pricing electricity consumption patterns via time ser...
Clustering individual household electricity consumption patterns enables a utility to design pricing plans catered to groups of households in a particular locality to more accurately reflect the cost of supply at a particular time of day.
In this paper we model each time series as an Autoregressive Moving Average (ARMA) process with an optimal model order determined by the Akaike Information Criterion when the parameters estimated by the Hannan-Rissanen algorithm converge. The estimated model has the representation of a transfer function with a frequency response defined by the ARMA parameters. We use the frequency response as the means to further refine the within cluster profiling and classification of the objects.
Through our modeling we are also able to identify instances where the consumption behavior exhibits patterns that are uncharacteristic or not in line with the behavior or consumption profiles of the other households in a particular locality providing insights in to potential faults, fraud or illegal activity.
Siren 2021 nita i
This document describes a proposed passive safety system for CANDU nuclear reactors using isolated condensers to remove decay heat over 72 hours following a station blackout accident. The system would use noncondensable gases in the isolated condensers to self-regulate heat transfer and natural circulation flow without secondary system depressurization. Modeling with RELAP5/MOD3.2 validated that the isolated condensers could maintain natural circulation cooling for over 72 hours to safely handle decay heat loads. The passive system would significantly increase the time window before core damage in an accident scenario compared to the current approximately 23.5 hour capability with active safety systems alone.
Ford_Application_form Zhangchengyang(Albert)
1. The applicant Zhang Chengyang is applying for a 6-credit conservation research grant from September to May to build a thermal model and power-limiting system to control the temperature of an electrical vehicle motor.
2. The project aims to build a thermal model through simulation and experiments to estimate the temperature of critical motor components, develop a power-limiting system to control torque based on temperature, and verify the model and system with experiments.
3. The experiments will use sensors to measure the temperature of a 1.5kW induction motor powered by a variable speed drive under different loads from a fan, compare estimated and actual temperatures, and test performance with and without the power-limiting control.
Energy Savings for Occupancy-Based Control of Variable-Air-Volume Systems
This document proposes occupancy-based control of VAV systems and lighting to improve energy efficiency. It analyzes the potential savings from using common occupancy sensors and more advanced sensors to adjust minimum airflow, lighting, and thermostat setpoints based on occupancy. Simulation results show the advanced sensors yield greater savings than common sensors, reducing whole building energy use by up to 18% compared to 5.9% for common sensors. Significant savings come from reducing unnecessary reheating through improved minimum airflow control based on occupancy.
S.1.2 Data Model for Energy Maps
This document discusses the data needed to create an energy map as part of the SUNSHINE project. Mandatory data includes 2D building footprints and attributes like a unique ID, construction period, height, elevation, and main use. Validation data from energy certifications or real consumption is also required at the building level. Optional attributes like the nature, number of units and floors, and refurbishment level can increase accuracy. The next steps will describe providing this data to the SUNSHINE platform to generate the first energy map and more details are in the technical module.
Wind energy (beta)
Its a small project by Prathamesh L Karande (me) and Bhushan Bhide (my friend)
to carry out wind analysis
Occupancy and hvac energy
Relationship between building occupancy and HVAC system loads for energy efficiency.
https://www.researchgate.net/profile/Zheng_Yang12
AQ modelling with real world traffic emissions
This document summarizes an air quality modeling project that used real-world traffic emissions data. Python workflow controllers were used to automate running dispersion models GRAL and RapidAIR at local and regional scales. Emissions were estimated using OPUS remote sensing data and the RapidEMS model. The project modeled baseline conditions and demolition scenarios to assess their impact on NO2 concentrations at high resolution. Automating the complex modeling process with Python ensured reproducibility across hundreds of runs and scenarios.
11 undp fyrom zagreb 8 9 dec.2013
This document discusses sustainable energy projects in Macedonia. It describes the ExCITE program which monitors energy consumption in public buildings. ExCITE aims to upgrade monitoring devices, include all public buildings, and analyze real-time energy data. The document also outlines two urban NAMA projects for Skopje - a transport NAMA focusing on public transit improvements and an energy NAMA involving energy efficiency upgrades in schools and improved heating/cooling controls. Both projects face challenges in establishing accurate baselines and verification systems to quantify emissions reductions.
JRC-EU-TIMES updates and outlook
The JRC develops models to analyze the energy system and related sectors. It uses several models together including JRC-EU-TIMES for energy system optimization, Dispa-SET for power system unit commitment, and others for demand, resources, etc. JRC-EU-TIMES models pathways for low-carbon technologies meeting Energy Union objectives. It was improved with updated renewable potentials, power-to-gas, biomass integration, and sensitivity analysis of policies and technologies. Dispa-SET optimizes power dispatch and was integrated into JRC-EU-TIMES through statistical analysis of various power system configurations.
IEA DSM Task 17: Integration of DSM, DG, RES and ES – Outcome of Phase 1 and ...
IEA DSM Task 17: Integration of DSM, DG, RES and ES – Outcome of Phase 1 and ...IEA DSM Implementing Agreement (IA)
Presented by René Kamphuis, TNO NL and Matthias Stifter, AIT Energy Department, Austria at the IEA DSM workshop in Lucerne, Switzerland on 16 October 2013.More Related Content
What's hot
Power Electronics Projects Using MATLAB Research Help
MATLAB Power Electronics Ideas
Major Features in Power Electronics
Support of Modern MATLAB Projects
8 seeking synergies - data modeling & aerial inspections rob andrews
8 seeking synergies - data modeling & aerial inspections rob andrewsSandia National Laboratories: Energy & Climate: Renewables
This document discusses using aerial infrared imaging and data analysis to identify module-level faults in photovoltaic power systems. It compares aerial infrared imaging to traditional manual inspection techniques and data-only analysis. Case studies show aerial imaging can detect more faults than manual checks or data analysis alone. The document recommends combining aerial imaging with periodic on-site inspections and I-V tracing of sample strings to optimize fault detection over time. It concludes aerial imaging provides multiple benefits including increased system output and lower operation and maintenance costs.Project poster
The document summarizes a project to build energy models of two campus buildings - AET Building and BSB Building - and validate the models' results with actual building data. It describes modeling the buildings' geometry, mechanical systems, occupancy schedules, and plug loads. The models will help estimate future electricity and heating/cooling loads to inform energy management decisions. Future work may involve more complex control schedules and ideas to improve energy efficiency.
TEUI Statistics Overview
This document provides an overview of how to use TEUI statistics tools to import map unit polygons and field points, select traits to update statistics for, and view the resulting map unit trait reports, field point reports, charts for individual map units and trait comparisons. It outlines the steps to import data, update statistics, and view the various reports and charts generated from the statistical analysis.
Smart Data Center Design
SimScale is joined by NDC-GARBE Data Centers to explore the energy demands of the rapidly expanding data center industry. With sustainability as a key objective, NDC-GARBE uses high-fidelity, cloud-based simulation to design for optimal thermal management in their facilities. This presentation demonstrates how SimScale's CFD platform can enable data center simulation and validate designs for improving energy efficiency and data center cooling strategies.
OPAL-RT RT14 Conference: Power system generation management
The document summarizes a presentation given at the 7th International Conference on Real-Time Simulation Technologies in Montreal from June 9-12, 2014. The presentation was given by Frank Kling and Vahid Jalili-Marandi from ETAP and OPAL-RT and discussed power system generation management using ePHASORsim real-time simulation software and ETAP's automatic generation control toolbox. The presentation included an introduction, information about ETAP and OPAL-RT, a demonstration of an end-to-end real-time simulation using the two softwares, and a question/answer session.
7 simulation, construction, operation, & back again - how operational d...
7 simulation, construction, operation, & back again - how operational d...Sandia National Laboratories: Energy & Climate: Renewables
The document discusses optimizing photovoltaic (PV) plant management through operational feedback loops. It describes how operational data from PV plants, including performance testing and monitoring, can be analyzed and used to inform and improve future PV design, engineering, and construction. Specific metrics like performance ratio, soiling effects, clipping losses, and differences between modeled versus actual outputs are evaluated. Analysis of data from over 279 megawatts of PV capacity across different sites, inverters and modules is presented. The goal is to better calibrate PV models and simulations based on real-world operational experience to enhance design processes and reduce performance risks.Session 6 project economics
This document summarizes key aspects of project economics for renewable energy projects, including:
- Cost components such as capital, production, financing options, and typical capital/production costs.
- Factors that can introduce uncertainty, such as multi-year timelines, and methods to estimate costs with uncertainty.
- Payback considerations for investors seeking a 3-4 year payback and sustainability metrics like energy payback ratio.
- How regulators view projects based on estimating annual revenue needs to cover fixed charges and operating costs.
- How externalities like a carbon tax would impact the busbar cost of a coal plant as an example.
VEDAViz for ETSAP partners
This document discusses using modeling to gain insights rather than just numbers. It suggests running a large number of scenario combinations to identify tipping points and make the model solutions available to stakeholders. It introduces VEDAViz, a tool for exploring and sharing model results intuitively across different technical levels. VEDAViz allows filtering scenarios, configuring dimensions on charts, and visualizing a dense set of scenarios to turn the model into an "expert system" for policymakers.
Poster s4 4 nita - luminita nuclear 2021. ppt
This document discusses the design of a passive safety system for CANDU6 nuclear power plants to provide safety for 72 hours during a station blackout accident. The proposed system is based on the ALFRED LFR reactor project and uses isolation condensers to provide long-term passive heat removal without active systems. Modeling with RELAP5 is being used to validate the design of the isolation condenser system and natural circulation capabilities. Engineering design by CITON is also being done in parallel to develop specifications and layouts. The goal is to provide full passive safety for 72 hours compared to the current 23 hour capability at Cernavoda plant through cooperation between modeling and engineering design of the new isolation condenser system.
Virtual Commissioning and Real-Time Training for Increasing Performance
This presentation discusses the gas conversion of an existing coal power plant and how using a high-fidelity simulator for virtual commissioning can increase plant performance and profits.
A framework for dynamic pricing electricity consumption patterns via time ser...
Clustering individual household electricity consumption patterns enables a utility to design pricing plans catered to groups of households in a particular locality to more accurately reflect the cost of supply at a particular time of day.
In this paper we model each time series as an Autoregressive Moving Average (ARMA) process with an optimal model order determined by the Akaike Information Criterion when the parameters estimated by the Hannan-Rissanen algorithm converge. The estimated model has the representation of a transfer function with a frequency response defined by the ARMA parameters. We use the frequency response as the means to further refine the within cluster profiling and classification of the objects.
Through our modeling we are also able to identify instances where the consumption behavior exhibits patterns that are uncharacteristic or not in line with the behavior or consumption profiles of the other households in a particular locality providing insights in to potential faults, fraud or illegal activity.
Siren 2021 nita i
This document describes a proposed passive safety system for CANDU nuclear reactors using isolated condensers to remove decay heat over 72 hours following a station blackout accident. The system would use noncondensable gases in the isolated condensers to self-regulate heat transfer and natural circulation flow without secondary system depressurization. Modeling with RELAP5/MOD3.2 validated that the isolated condensers could maintain natural circulation cooling for over 72 hours to safely handle decay heat loads. The passive system would significantly increase the time window before core damage in an accident scenario compared to the current approximately 23.5 hour capability with active safety systems alone.
Ford_Application_form Zhangchengyang(Albert)
1. The applicant Zhang Chengyang is applying for a 6-credit conservation research grant from September to May to build a thermal model and power-limiting system to control the temperature of an electrical vehicle motor.
2. The project aims to build a thermal model through simulation and experiments to estimate the temperature of critical motor components, develop a power-limiting system to control torque based on temperature, and verify the model and system with experiments.
3. The experiments will use sensors to measure the temperature of a 1.5kW induction motor powered by a variable speed drive under different loads from a fan, compare estimated and actual temperatures, and test performance with and without the power-limiting control.
Energy Savings for Occupancy-Based Control of Variable-Air-Volume Systems
This document proposes occupancy-based control of VAV systems and lighting to improve energy efficiency. It analyzes the potential savings from using common occupancy sensors and more advanced sensors to adjust minimum airflow, lighting, and thermostat setpoints based on occupancy. Simulation results show the advanced sensors yield greater savings than common sensors, reducing whole building energy use by up to 18% compared to 5.9% for common sensors. Significant savings come from reducing unnecessary reheating through improved minimum airflow control based on occupancy.
S.1.2 Data Model for Energy Maps
This document discusses the data needed to create an energy map as part of the SUNSHINE project. Mandatory data includes 2D building footprints and attributes like a unique ID, construction period, height, elevation, and main use. Validation data from energy certifications or real consumption is also required at the building level. Optional attributes like the nature, number of units and floors, and refurbishment level can increase accuracy. The next steps will describe providing this data to the SUNSHINE platform to generate the first energy map and more details are in the technical module.
Wind energy (beta)
Its a small project by Prathamesh L Karande (me) and Bhushan Bhide (my friend)
to carry out wind analysis
Occupancy and hvac energy
Relationship between building occupancy and HVAC system loads for energy efficiency.
https://www.researchgate.net/profile/Zheng_Yang12
AQ modelling with real world traffic emissions
This document summarizes an air quality modeling project that used real-world traffic emissions data. Python workflow controllers were used to automate running dispersion models GRAL and RapidAIR at local and regional scales. Emissions were estimated using OPUS remote sensing data and the RapidEMS model. The project modeled baseline conditions and demolition scenarios to assess their impact on NO2 concentrations at high resolution. Automating the complex modeling process with Python ensured reproducibility across hundreds of runs and scenarios.
11 undp fyrom zagreb 8 9 dec.2013
This document discusses sustainable energy projects in Macedonia. It describes the ExCITE program which monitors energy consumption in public buildings. ExCITE aims to upgrade monitoring devices, include all public buildings, and analyze real-time energy data. The document also outlines two urban NAMA projects for Skopje - a transport NAMA focusing on public transit improvements and an energy NAMA involving energy efficiency upgrades in schools and improved heating/cooling controls. Both projects face challenges in establishing accurate baselines and verification systems to quantify emissions reductions.
What's hot (20)
Power Electronics Projects Using MATLAB Research Help
Power Electronics Projects Using MATLAB Research Help
8 seeking synergies - data modeling & aerial inspections rob andrews
8 seeking synergies - data modeling & aerial inspections rob andrews
OPAL-RT RT14 Conference: Power system generation management
OPAL-RT RT14 Conference: Power system generation management
7 simulation, construction, operation, & back again - how operational d...
7 simulation, construction, operation, & back again - how operational d...
Virtual Commissioning and Real-Time Training for Increasing Performance
Virtual Commissioning and Real-Time Training for Increasing Performance
A framework for dynamic pricing electricity consumption patterns via time ser...
A framework for dynamic pricing electricity consumption patterns via time ser...
Energy Savings for Occupancy-Based Control of Variable-Air-Volume Systems
Energy Savings for Occupancy-Based Control of Variable-Air-Volume Systems
Similar to Visions for ETSAP-TIAM
JRC-EU-TIMES updates and outlook
The JRC develops models to analyze the energy system and related sectors. It uses several models together including JRC-EU-TIMES for energy system optimization, Dispa-SET for power system unit commitment, and others for demand, resources, etc. JRC-EU-TIMES models pathways for low-carbon technologies meeting Energy Union objectives. It was improved with updated renewable potentials, power-to-gas, biomass integration, and sensitivity analysis of policies and technologies. Dispa-SET optimizes power dispatch and was integrated into JRC-EU-TIMES through statistical analysis of various power system configurations.
IEA DSM Task 17: Integration of DSM, DG, RES and ES – Outcome of Phase 1 and ...
IEA DSM Task 17: Integration of DSM, DG, RES and ES – Outcome of Phase 1 and ...IEA DSM Implementing Agreement (IA)
Presented by René Kamphuis, TNO NL and Matthias Stifter, AIT Energy Department, Austria at the IEA DSM workshop in Lucerne, Switzerland on 16 October 2013.The maximum power point tracking based-control system for small-scale wind tu...
This paper presents the research on small-scale wind turbine systems based on the Maximum Power Point Tracking (MPPT) algorithm. Then propose a new structure of a small-scale wind turbine system to simplify the structure of the system, making the system highly practical. This paper also presented an MPPT-Fuzzy controller design and proposed a control system using the wind speed sensor for small-scale wind turbines. Systems are simulated using Matlab/Simulink software to evaluate the feasibility of the proposed controller. As a result, the system with the MPPT-Fuzzy controller has much better quality than the traditional control system.
Electricity Demand Side Management and End-use efficiency
This presentation give an overview about demand side management and end-use efficiency for electricity supply systems. It was prepared for energy auditor training in Nepal in the context of GIZ/NEEP programme. For further information go to EEC webpage: http://eec-fncci.org/
Electricity Demand Side Management (DSM) and End-use Efficiency
This presentation explains the concept of Electical Demand Side Management and shows how to implement it in industries. It was prepared for energy auditor training in Nepal in the context of GIZ/NEEP programme. For further information go to EEC webpage: http://www.eec-fncci.org
Electricity scenarios-for-rsa-csir-pc energy-21_feb2017_sent
Brilliant presentation by the CSIR showing how renewable energy is the way forward for South Africa.
Srm ps eee-pg2013-14
This document outlines the curriculum and syllabus for the M.Tech (Full Time) Power Systems program offered from 2013-2014 at SRM University. It includes:
- Details of core courses, program elective courses, and supportive courses offered across 4 semesters totaling 72 credits required for the degree.
- Syllabi and course objectives for 10 core courses covering topics like power system analysis, operation and control, protection, and project work.
- A list of 20 program elective courses on specialized power system topics that students can choose from.
- Information on contact hours, credits and references for each core course.
The curriculum is designed to provide students both theoretical knowledge and practical
Psat toolbox-8631349
The document discusses the Power System Analysis Toolbox (PSAT), a MATLAB toolbox for electric power system analysis and control. It provides an overview of PSAT, including its history, features, component models, and utilities. PSAT allows for both static and dynamic power system analysis and includes tools such as power flow, continuation power flow, optimal power flow, small signal stability analysis, and time domain simulation. The document also provides instructions for installing, launching, setting up, loading data into, and running analyses with PSAT.
Drivers and Barriers in the current CSP market
This webinar will provide a general view of drivers and barriers for CSP development, with a particular focus on the structure of the CSP Value Chain. From a technical point of view, the main key performances will be reviewed for the different technologies.
5.5 off main-grid technologies for power generation in rural contexts
This document provides an overview of off-grid power generation technologies for rural contexts. It begins with a 4-step process for designing off-grid energy systems that matches local needs with available resources in an optimized and cost-effective manner. The document then discusses assessing local energy needs and available solar, wind, and hydro resources. It provides technology summaries of solar photovoltaics, small wind turbines, and small hydropower systems. Hybrid systems that combine these technologies with batteries or diesel generators are also discussed. The document concludes with considerations for evaluating the impact of off-grid technologies on local development.
A novel approach to evaluate dynamic performance for photovoltaic system usin...
With the growing demand for renewable energy, solar photovoltaic (PV) systems have gained popularity as a reliable source of clean electricity. However, the performance of these systems can be limited by factors such as suboptimal maximum power point tracking (MPPT) algorithms. In order to improve the power generation efficiency of PV systems, it is important to evaluate the performance of dynamic MPPT algorithms that can adapt to varying operating conditions. Traditionally, such evaluations have been time consuming and expensive, often requiring extensive testing and measurement equipment. In this paper, we propose a novel approach to evaluate dynamic MPPT performance very quickly and simply using PSIM software. This approach enables accurate and efficient evaluation of MPPT performance under a wide range of operating conditions, while minimizing the cost and time involved in traditional testing methods. When applying the proposed method to a 3.7 kW inverter using the traditional perturbation and observation (P and O) method, we found that the highest average efficiency was 98.92% at an MPPT control period of 0.1s and a voltage perturbation of 1 V. This evaluation technique provides valuable insights into the design and optimization of more efficient MPPT control algorithms, leading to improved power generation efficiency and increased adoption of solar PV systems.
Computer modeling-simulation&examples1
This document discusses computer modeling and simulation tools used in modern engineering design. It provides examples of how simulation was used to diagnose problems and improve the design of train control systems. Key points include:
- Computer modeling allows testing of complex systems without building physical prototypes, reducing costs and shortening development time.
- Matlab/Simulink was used to model train control systems to investigate stability issues and propose solutions before implementation.
- Time and frequency domain simulations helped diagnose resonance problems and improve grounding schemes.
Modelling global macroeconomic impacts of a carbon constrained energy system ...
This document outlines a proposed structure and initial results from modelling the global macroeconomic impacts of decarbonizing the energy system using an integrated energy-economy model called ETSAP-TIAM-MSA. The model links the bottom-up energy system model ETSAP-TIAM with a macroeconomic model called MSA. Initial results show that meeting climate targets leads to lower carbon emissions but can reduce GDP by up to 5% in some regions by 2050 compared to baseline scenarios without climate policy. The model captures non-linear demand responses to energy costs that cannot be represented by simple demand elasticities. Further work is needed to refine regional calibrations and test sensitivities.
Addressing climate change uncertainty with a monte carloversion of TIMES
The document summarizes research incorporating Monte Carlo analysis into the TIMES integrated assessment model to better represent uncertainty. Researchers applied 1,000 simulations each of baseline, 2°C, and 1.5°C scenarios while varying 18 uncertain input parameters. This provided probabilistic outputs rather than single deterministic results. Key findings included statistical distributions of temperature change, primary energy supply, and emissions across the scenarios accounting for uncertain inputs like climate sensitivity and discount rates. The approach allows evaluation of policy resilience under uncertainty.
The MPPT algorithm combined with pitch angle control for the small-scale wind...
The MPPT algorithm combined with pitch angle control for the small-scale wind...International Journal of Power Electronics and Drive Systems
This research proposes the control system structure for a small-scale wind turbine. Significantly, the maximum power point tracking algorithm (MPPT) and the pitch angle controller are deeply analyzed; this is the base for proposing the strategy of the MPPT algorithm combined with pitch-angle control in a wide speed range of wind. This article also researches the converters, then analyses the advantages of each converter to choose the suitable converter for the small-scale wind turbine. In the MPPT algorithm design, the expert experience takes advantage through the fuzzy controller. The pitch angle controller is built based on the PID controller with its parameters adjusted by Fuzzy logic. The results showed that the effectiveness of the proposed control strategy is much better than that of the traditional control strategy. Moreover, in high and low wind speeds, the proposed control system operates reliably and stably.Grid code
The document provides an overview of grid code technical recruitments in India. It discusses the roles of various organizations in electricity transmission planning and operations. The National Load Dispatch Center oversees national grid operations while Regional Load Dispatch Centers control regional operations. State Load Dispatch Centers control operations within states. Transmission utilities and state transmission utilities plan and develop inter-state and intra-state transmission systems respectively. The Central Electricity Authority issues technical standards and guidelines for transmission planning. Regional Power Committees facilitate coordination between states. The document also summarizes various codes related to transmission planning, grid connections, grid operations, and scheduling and dispatch of electricity.
EFEU / FLEXe Heimonen Ismo approach for regional energy system analysis
This document discusses the need for a systematic approach and simulation tools to analyze complex and decentralized future energy systems. It describes tools and methods developed for regional energy system analysis, including optimization models, energy flow simulators, and demand response simulation. As a case study, it examines scenarios for the district heating network in Järvenpää from 2015-2035, exploring building stock changes, energy efficiency improvements, and options for industrial waste heat and prosumer heat sales. Evaluation of the scenarios will consider energy, ecological, and economic aspects. More detailed results and related publications are referenced.
Ticket to Kyoto investments - Virgil Grot RET
1) The document discusses innovative investments made by various public transport organizations through the Ticket to Kyoto (T2K) work package to improve energy efficiency and production.
2) Several investments focused on energy efficiency, such as motion sensors installed in RET underground stations saving 428,720 kWh per year with a 3-4 year ROI. Breaking energy recovery technologies for metros and trams were also reviewed.
3) Other investments focused on energy production, such as TfGM's operational wind turbine saving 27,000 kWh annually and Rochdale hydroelectric turbine expected to save 150,000 kWh per year with a 3 year ROI. STIB's cogeneration installation reduces CO2 by 168
New developments in Aimsun and future trends
New developments in Aimsun and future trends are discussed. Aimsun 8.2 includes improvements to demand forecasting using public transportation crowding costs and congestion models, as well as new dynamic traffic assignment methods. Future trends may involve activity based models, automated vehicles, parallel processing techniques, and peak spreading analysis.
Comprehensive Review on Maximum Power Point Tracking Methods for SPV System
This document reviews over 30 maximum power point tracking (MPPT) methods for solar photovoltaic systems. It provides an overview of various conventional and advanced MPPT techniques, including perturb and observe, incremental conductance, fuzzy logic control, and evolutionary algorithms. The document analyzes and compares the performance of these methods in terms of tracking speed, efficiency under changing weather conditions, ability to handle partial shading, and complexity of implementation. It aims to help researchers select the most suitable MPPT technique for their application.
Similar to Visions for ETSAP-TIAM (20)
IEA DSM Task 17: Integration of DSM, DG, RES and ES – Outcome of Phase 1 and ...
IEA DSM Task 17: Integration of DSM, DG, RES and ES – Outcome of Phase 1 and ...
The maximum power point tracking based-control system for small-scale wind tu...
The maximum power point tracking based-control system for small-scale wind tu...
Electricity Demand Side Management and End-use efficiency
Electricity Demand Side Management and End-use efficiency
Electricity Demand Side Management (DSM) and End-use Efficiency
Electricity Demand Side Management (DSM) and End-use Efficiency
Electricity scenarios-for-rsa-csir-pc energy-21_feb2017_sent
Electricity scenarios-for-rsa-csir-pc energy-21_feb2017_sent
5.5 off main-grid technologies for power generation in rural contexts
5.5 off main-grid technologies for power generation in rural contexts
A novel approach to evaluate dynamic performance for photovoltaic system usin...
A novel approach to evaluate dynamic performance for photovoltaic system usin...
Modelling global macroeconomic impacts of a carbon constrained energy system ...
Modelling global macroeconomic impacts of a carbon constrained energy system ...
Addressing climate change uncertainty with a monte carloversion of TIMES
Addressing climate change uncertainty with a monte carloversion of TIMES
The MPPT algorithm combined with pitch angle control for the small-scale wind...
The MPPT algorithm combined with pitch angle control for the small-scale wind...
EFEU / FLEXe Heimonen Ismo approach for regional energy system analysis
EFEU / FLEXe Heimonen Ismo approach for regional energy system analysis
Comprehensive Review on Maximum Power Point Tracking Methods for SPV System
Comprehensive Review on Maximum Power Point Tracking Methods for SPV System
More from IEA-ETSAP
Variable Renewable Energy in China's Transition
Variable Renewable Energy in China's Transition
Ding Qiuyu, UCL Energy Institute
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
The Nordics as a hub for green electricity and fuels
The Nordics as a hub for green electricity and fuels
Mr. Till ben Brahim, Energy Modelling Lab, Denmark
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
The role of Norwegian offshore wind in the energy system transition
The role of Norwegian offshore wind in the energy system transition
Dr. Pernille Seljom, IFE, Norway
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Detail representation of molecule flows and chemical sector in TIMES-BE: prog...
Detail representation of molecule flows and chemical sector in TIMES-BE: progress and challenges
Mr. Juan Correa, VITO, Belgium
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Green hydrogen trade from North Africa to Europe: optional long-term scenario...
Green hydrogen trade from North Africa to Europe: optional long-term scenarios with the JRC-EU-TIMES model
Ms. Maria Cristina Pinto, RSE - Ricerca sul Sistema Energetico, Italy
Ms. Maria Cristina Pinto, RSE - Ricerca sul Sistema Energetico, Italy
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Optimal development of the Canadian forest sector for both climate change mit...
Optimal development of the Canadian forest sector for both climate change mitigation and economic growth: an original application of the North American TIMES Energy Model (NATEM)
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Presentation on IEA Net Zero Pathways/Roadmap
Presentation on IEA Net Zero Pathways/Roadmap
Uwe Remme, IEA
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Flexibility with renewable(low-carbon) hydrogen
Flexibility with renewable hydrogen
Paul Dodds, Jana Fakhreddine & Kari Espegren, IEA ETSAP
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Bioenergy in energy system models with flexibility
Bioenergy in energy system models with flexibility
Tiina Koljonen & Anna Krook-Riekola, IEA ETSAP
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Reframing flexibility beyond power - IEA Bioenergy TCP
Reframing flexibility beyond power
Mr. Fabian Schipfer, IEA Bioenergy TCP
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Decarbonization of heating in the buildings sector: efficiency first vs low-c...
Decarbonization of heating in the buildings sector: efficiency first vs low-carbon heating dilemma
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Mr. Andrea Moglianesi, VITO, Belgium
The Regionalization Tool: spatial representation of TIMES-BE output data in i...
The Regionalization Tool: spatial representation of TIMES-BE output data in industrial clusters for future energy infrastructure analysis
Ms. Enya Lenaerts Vito/EnergyVille, Belgium
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Synthetic methane production prospective modelling up to 2050 in the European...
Synthetic methane production prospective modelling up to 2050 in the European Union
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Ms. Marie Codet, Centre de mathématiques appliquées - Mines ParisTech; France
Energy Transition in global Aviation - ETSAP Workshop Turin
Energy Transition in global Aviation - ETSAP Workshop Turin
Mr. Felix Lippkau, IER University of Suttgart, Germany
16–17th november 2023, Turin, Italy, etsap meeting, etsap winter workshop, semi-annual meeting, november 2023, Politecnico di Torino Lingotto, Torino
Integrated Energy and Climate plans: approaches, practices and experiences
Integrated Energy and Climate plans: approaches, practices and experiences
VO: reduce the distance between modellers and DM,
VO: the work process
- Making modifications collaboratively,
- Running the model,
- Reports and collaborative analysis
VedaOnline
Mr Rocco De Miglio
16–17th november 2023, amit kanudia, etsap meeting, etsap winter workshop, italy, kanors-emr, mr rocco de miglio, mr. amit kanudia kanors-emr, november 2023, politecnico di torino, semi-annual meeting, torino, turin, vedaonline
Updates on Veda provided by Amit Kanudia from KanORS-EMR
Veda online updates - Veda for open-source models
TIMES and OSeMOSYSBrowse, Veda Assistant
VEDA2.0, VEDAONLINE, VEDA
Mr. Amit Kanudia KanORS-EMR
16–17th november 2023, etsap meeting, etsap winter workshop, italy, mr. amit kanudia kanors-emr, november 2023, politecnico di torino lingotto, semi-annual etsap meeting, torino, turin
Energy system modeling activities in the MAHTEP Group
Energy system modeling activities in the MAHTEP Group
Dr Daniele Lerede, Politecnico di Torino
16–17th november 2023, dr daniele lerede, etsap meeting, etsap winter workshop, italy, mathep group, november 2023, politecnico di torino, semi-annual meeting, turin
Applying science fiction to approach the future
The document discusses using science fiction to think about future energy systems. It proposes applying system analysis models to explore different technology combinations that meet future energy needs. However, it notes that these models do not consider social factors like behavior and justice. It suggests using genres like climate fiction and solar punk to bring more collective narratives about energy futures. Specifically, it advocates using a hackathon approach to gather knowledge and create imaginary fiction stories around different future scenarios to help build worlds and consider the human aspects of energy system design.
Will it leak?: Discussions of leakage risk from subsurface storage of carbon ...
The document discusses carbon capture and storage (CCS) and the potential risks of leakage from subsurface storage of carbon dioxide. It provides background on CCS, explaining that carbon dioxide is captured from industrial sources and injected underground for permanent storage. It then discusses four main types of potential subsurface leakage: 1) capillary leakage if seal rocks have larger particles, 2) exceeding the fracture gradient of the seal, 3) leakage along or across faults, and 4) leakage from new or legacy boreholes. The document analyzes case studies of both CCS and carbon capture, utilization, and storage (CCUS) projects to illustrate examples of each leakage type. It concludes that CCS/CCUS has a low overall risk but is not
Long-Term Decarbonization Pathways In Emerging Economies: Insights From 12 Mo...
This document summarizes the preliminary results of a study comparing long-term decarbonization pathways in 12 developing countries and 2 regions modeled using the Electricity Planning Model. Key findings include:
1) Ambitious decarbonization would require annual investments of 1-3% of GDP, compared to around 1% for business-as-usual scenarios.
2) Renewables, led by solar, would dominate capacity additions. Conventional plants would operate more flexibly to integrate variable renewables.
3) Achieving deep decarbonization would significantly increase energy costs but carbon prices of $20-120/t could enable cost-effective emissions reductions.
More from IEA-ETSAP (20)
The Nordics as a hub for green electricity and fuels
The Nordics as a hub for green electricity and fuels
The role of Norwegian offshore wind in the energy system transition
The role of Norwegian offshore wind in the energy system transition
Detail representation of molecule flows and chemical sector in TIMES-BE: prog...
Detail representation of molecule flows and chemical sector in TIMES-BE: prog...
Green hydrogen trade from North Africa to Europe: optional long-term scenario...
Green hydrogen trade from North Africa to Europe: optional long-term scenario...
Optimal development of the Canadian forest sector for both climate change mit...
Optimal development of the Canadian forest sector for both climate change mit...
Bioenergy in energy system models with flexibility
Bioenergy in energy system models with flexibility
Reframing flexibility beyond power - IEA Bioenergy TCP
Reframing flexibility beyond power - IEA Bioenergy TCP
Decarbonization of heating in the buildings sector: efficiency first vs low-c...
Decarbonization of heating in the buildings sector: efficiency first vs low-c...
The Regionalization Tool: spatial representation of TIMES-BE output data in i...
The Regionalization Tool: spatial representation of TIMES-BE output data in i...
Synthetic methane production prospective modelling up to 2050 in the European...
Synthetic methane production prospective modelling up to 2050 in the European...
Energy Transition in global Aviation - ETSAP Workshop Turin
Energy Transition in global Aviation - ETSAP Workshop Turin
Integrated Energy and Climate plans: approaches, practices and experiences
Integrated Energy and Climate plans: approaches, practices and experiences
Updates on Veda provided by Amit Kanudia from KanORS-EMR
Updates on Veda provided by Amit Kanudia from KanORS-EMR
Energy system modeling activities in the MAHTEP Group
Energy system modeling activities in the MAHTEP Group
Will it leak?: Discussions of leakage risk from subsurface storage of carbon ...
Will it leak?: Discussions of leakage risk from subsurface storage of carbon ...
Long-Term Decarbonization Pathways In Emerging Economies: Insights From 12 Mo...
Long-Term Decarbonization Pathways In Emerging Economies: Insights From 12 Mo...
Recently uploaded
原版制作(Manitoba毕业证书)曼尼托巴大学毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(Manitoba毕业证书)曼尼托巴大学毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(unuk毕业证书)英国诺丁汉大学毕业证如何办理
原版一模一样【微信：741003700 】【(unuk毕业证书)英国诺丁汉大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(unuk毕业证书)英国诺丁汉大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(unuk毕业证书)英国诺丁汉大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(unuk毕业证书)英国诺丁汉大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(unuk毕业证书)英国诺丁汉大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
REPORT-PRESENTATION BY CHIEF SECRETARY, ANDAMAN NICOBAR ADMINISTRATION IN OA ...
Green Tribunal Andaman
A Comprehensive Guide on Cable Location Services Detections Method, Tools, an...
A Comprehensive Guide on Cable Location Services Detections Method, Tools, an...Aussie Hydro-Vac Services
Explore Aussie Hydrovac's comprehensive cable location services, employing advanced tools like ground-penetrating radar and robotic CCTV crawlers for precise detection. Also offering aerial surveying solutions. Contact for reliable service in Australia.Mass Production of Trichogramma sp..pptx
Trichogramma spp. is an efficient egg parasitoids that potentially assist to manage the insect-pests from the field condition by parasiting the host eggs. To mass culture this egg parasitoids effectively, we need to culture another stored grain pest- Rice Meal Moth (Corcyra Cephalonica). After rearing this pest, the eggs of Corcyra will carry the potential Trichogramma spp., which is an Hymenopteran Wasp. The detailed Methodologies of rearing both Corcyra Cephalonica and Trichogramma spp. have described on this ppt.
一比一原版西澳大学毕业证学历证书如何办理
原版定制【微信:741003700】《西澳大学毕业证学位证成绩单》【微信:741003700】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份毕业证【Q微信741003700】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【Q微信741003700】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
Lessons from operationalizing integrated landscape approaches
Presented by James Reed at "9th Landscape Sustainability Science Forum" on 11 May 2024
一比一原版（Glasgow毕业证）英国格拉斯哥大学毕业证如何办理
原件一模一样【微信：WP101A】【（Glasgow毕业证）英国格拉斯哥大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理（Glasgow毕业证）英国格拉斯哥大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理（Glasgow毕业证）英国格拉斯哥大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理（Glasgow毕业证）英国格拉斯哥大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理（Glasgow毕业证）英国格拉斯哥大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
(Q)SAR Assessment Framework: Guidance for Assessing (Q)SAR Models and Predict...
The webinar provided an overview of the new OECD (Q)SAR Assessment Framework for evaluating the scientific validity of (Q)SAR models, predictions, and results from multiple predictions. The QAF provides assessment elements for existing principles for evaluating models, as well as new principles for evaluating predictions and results. In addition to the principles, assessment elements, and guidance for evaluating each element, the QAF includes a checklist for reporting assessments.
This new Framework provides regulators with a consistent and transparent approach for reviewing the use of (Q)SAR predictions in a regulatory context and increases the confidence to accept alternative methods for evaluating chemical hazards. The OECD worked closely together with the Istituto Superiore di Sanità (Italy) and the European Chemicals Agency (ECHA), supported by a variety of international experts to develop a checklist of criteria and guidance for evaluating each criterion. The aim of the QAF is to help establish confidence in the use of (Q)SARs in evaluating chemical safety, and was designed to be applicable irrespective of the modelling technique used to build the model, the predicted endpoint, and the intended regulatory purpose.
The webinar provided an overview of the project and presented the main aspects of the framework for assessing models and results based on individual or multiple predictions.
Republic of Ethiopia EPA (2003) Ambient Environment Standards for Ethiopia.pdf
Republic of Ethiopia EPA (2003) Ambient Environment Standards for Ethiopia.pdf
Stay Ahead of the Curve with PFAS Testing
There is a tremendous amount of news being disseminated every day online about dangerous forever chemicals called PFAS. In this interview with a global PFAS testing expert, Geraint Williams of ALS, he and York Analytical President Michael Beckerich discuss the hot-button issues for the environmental engineering and consulting industry -- the wider range of PFAS contamination sites, new PFAS that are unregulated, and the compliance challenges ahead.
Widespread PFAS contamination requires stringent sampling and laboratory analyses by certified laboratories only -- whether it is for PFAS in soil, groundwater, wastewater or drinking water.
Contact us at York Analytical Laboratories for expert environmental testing with fast turnaround times and client service. We have 4 state-certified laboratories in Connecticut, New York and New Jersey, and 4 client service centers.
P: 800-306-YORK
E: clientservices@YorkLab.com
W: YorkLab.com
Monitor indicators of genetic diversity from space using Earth Observation data
Genetic diversity within and among populations is essential for species persistence. While targets and indicators for genetic diversity are captured in the Kunming-Montreal Global Biodiversity Framework, assessing genetic diversity across many species at national and regional scales remains challenging. Parties to the Convention on Biological Diversity (CBD) need accessible tools for reliable and efficient monitoring at relevant scales. Here, we describe how Earth Observation satellites (EO) make essential contributions to enable, accelerate, and improve genetic diversity monitoring and preservation. Specifically, we introduce a workflow integrating EO into existing genetic diversity monitoring strategies and present a set of examples where EO data is or can be integrated to improve assessment, monitoring, and conservation. We describe how available EO data can be integrated in innovative ways to support calculation of the genetic diversity indicators of the GBF monitoring framework and to inform management and monitoring decisions, especially in areas with limited research infrastructure or access. We also describe novel, integrative approaches to improve the indicators that can be implemented with the coming generation of EO data, and new capabilities that will provide unprecedented detail to characterize the changes to Earth’s surface and their implications for biodiversity, on a global scale.
一比一原版美国贝翰文大学毕业证（BU学位证）如何办理
原件一模一样【微信：WP101A】【美国贝翰文大学毕业证（BU学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国贝翰文大学毕业证（BU学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国贝翰文大学毕业证（BU学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国贝翰文大学毕业证（BU学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国贝翰文大学毕业证（BU学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Exploring low emissions development opportunities in food systems
Presented by Christopher Martius (CIFOR-ICRAF) at "Side event 60th sessions of the UNFCCC Subsidiary Bodies - Sustainable Bites: Innovating Low Emission Food Systems One Country at a Time" on 13 June 2024
一比一原版美国堪萨斯大学毕业证（KU学位证）如何办理
原件一模一样【微信：WP101A】【美国堪萨斯大学毕业证（KU学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国堪萨斯大学毕业证（KU学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国堪萨斯大学毕业证（KU学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国堪萨斯大学毕业证（KU学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国堪萨斯大学毕业证（KU学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
学校原版(unuk学位证书)英国牛津布鲁克斯大学毕业证硕士文凭原版一模一样
原版定制【微信:bwp0011】《(unuk学位证书)英国牛津布鲁克斯大学毕业证硕士文凭》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
Recently uploaded (20)
REPORT-PRESENTATION BY CHIEF SECRETARY, ANDAMAN NICOBAR ADMINISTRATION IN OA ...
REPORT-PRESENTATION BY CHIEF SECRETARY, ANDAMAN NICOBAR ADMINISTRATION IN OA ...
A Comprehensive Guide on Cable Location Services Detections Method, Tools, an...
A Comprehensive Guide on Cable Location Services Detections Method, Tools, an...
Green Wealth Management - UBS A world of access and opportunuty
Green Wealth Management - UBS A world of access and opportunuty
Lessons from operationalizing integrated landscape approaches
Lessons from operationalizing integrated landscape approaches
(Q)SAR Assessment Framework: Guidance for Assessing (Q)SAR Models and Predict...
(Q)SAR Assessment Framework: Guidance for Assessing (Q)SAR Models and Predict...
Republic of Ethiopia EPA (2003) Ambient Environment Standards for Ethiopia.pdf
Republic of Ethiopia EPA (2003) Ambient Environment Standards for Ethiopia.pdf
Monitor indicators of genetic diversity from space using Earth Observation data
Monitor indicators of genetic diversity from space using Earth Observation data
Exploring low emissions development opportunities in food systems
Exploring low emissions development opportunities in food systems
Visions for ETSAP-TIAM
- 1. TIAM Update Workshop ETSAP Meeting: Stuttgart 9th November2018
- 2. Agenda 13:30 – 14:30 TIAM input session (inputs from wider ETSAP welcome) – Intro to TIAM (2 mins) – SWOT analysis (15 minutes) – Regions selection discussion (40 minutes) 14:30 – 15:00 Coffee break 15:00 – 17:00 TIAM update session – Go through timelines and key workflow dependencies
- 3. Method: ETSAP-TIAM model outline• 15 Region linear programming bottom-up energy system model of IEA-ETSAP • Integrated model of the entire energy system • Prospective analysis on medium to long term horizon (2100) – Demand driven by exogenous energy service demands – SSP2 from OECD Env-LINKS CGE model – Regional Structural detail of the economy • Partial and dynamic equilibrium – Price-elastic demands – General Equilibrium with MACRO • Minimizes the total system cost – Or Maximises Consumption/Utility – Hybrid General Equilibrium MSA • Optimal technology selection • Environmental constraints – GHG, Local Air Pollution & Damages • Integrated Simple Climate Model • Myopic and Stochastic run options
- 5. Selection of Regions Three options currently on the table 1. Keep the regions as they are 2. Move to a ~30 region model based on logical approach 3. Completely flexible aggregation by generating automated BY templates from IEA data and aggregating using VEDA super-region feature
- 7. Goals for this meeting • Final decision on selection of regions • Identify specific tasks to address critical decision points and allocate leads and deadlines • Begin discussion on subRES update • Press ‘go’ on BASE year update
- 8. TIAM task breakdown and planning https://tinyurl.com/TIAMplan
- 9. Have we achieved our goals? • Final decision on selection of regions • Identify specific tasks to address critical decision points and allocate leads and deadlines • Begin discussion on subRES update • Press ‘go’ on BASE year update