USB PD Introduction
•
0 likes•1,811 views
USB PD (Universal Serial Bus Power Delivery) is a specification that enables flexible power delivery and data transfer over a single USB cable. It allows devices to negotiate the power they require through communication with the power source. This increases power levels above existing USB standards, up to 100W. It also allows power to flow in either direction and devices to draw only the power needed for a given application in order to optimize power management across multiple devices.
Report
Share
Report
Share
Download to read offline
Recommended
USB 3.0
USB 3.0 allows for much faster data transfer speeds of up to 5Gbps, which is 10 times faster than USB 2.0. It includes improvements like increased power delivery and more efficient data streaming. USB 3.0 is backward compatible with previous standards and uses an additional set of pins in its connectors to separate the SuperSpeed signals from the standard USB 2.0 ones. The specification also optimized power efficiency through asynchronous notifications and lower idle power requirements.
USB 3.0 -Infinite Possibilities
USB 3.0 is the third major version of the Universal Serial Bus (USB) standard for interfacing computers and electronic devices. Among other improvements, USB 3.0 adds the new transfer rate referred to as SuperSpeed USB (SS) that can transfer data at up to 5 Gbit/s (625 MB/s), which is about ten times as fast as the USB 2.0 standard.
Universal serial bus(usb)
USB stands for Universal Serial Bus and was created in 1995-96 by several companies to provide a universal standard for connecting devices to computers. It allows for bi-directional communication between devices at high speeds up to 10Gbps for USB 3.1. USB has evolved over time from Low Speed USB 1.0 at 1.5Mbps to Super Speed USB 3.1 at 10Gbps. Key components include the host computer, hubs for connecting multiple devices, and any peripheral devices.
Introduction of USB 3.1
USB 3.1 provides faster data transfer speeds of up to 10Gbps, which is twice as fast as USB 3.0. It was created to meet the increasing needs for transferring large files like HD videos. USB 3.1 has two main goals - improved performance and backward compatibility with older USB standards. It uses a new reversible Type-C connector that allows for easier plugging and faster charging compared to previous connectors. Compliance testing also focuses on meeting the new electrical and transfer speed requirements for USB 3.1.
Usb 2
USB was developed in the mid-1990s to standardize connections between computers and peripherals like keyboards, mice, cameras and drives. It has several key features including being low cost, using a single connector type, and allowing for hot plugging of devices. USB operates using a star topology with a host controller connecting devices and hubs. Communication between devices and the host occurs through pipes that associate endpoints to software. Data is transmitted using a token phase, data phase and handshake phase over differential signal lines with encoding and error checking handled by the physical layer.
USB protocol
This document provides an introduction to USB (Universal Serial Bus). It discusses the original motivations for USB including flexibility, ease of use, and high speed data transfer. It describes the different USB speeds and the star topology of the USB bus. It explains that USB uses a host-controlled model and supports up to 127 devices connected at once. The document also covers USB packets, transactions, functions, endpoints, pipes, and the different types of transfers (control, interrupt, bulk, isochronous).
Universal Serial Bus (USB)
The document summarizes key aspects of the Universal Serial Bus (USB) standard. It discusses the history and evolution of USB, its architectural overview including host, hubs and devices, communication flow through pipes between host and devices, and the protocol layer involving different packet and transfer types. The document provides an overview of the USB standard to understand its functionality and implementation.
USB 3.0
USB 3.0 provides a 10x performance increase over USB 2.0 through a new dual-bus architecture that allows for faster SuperSpeed transfers while maintaining backward compatibility. It was developed to meet demands for faster transfer speeds to support devices like hard drives, flash drives, and optical drives. USB 3.0 introduces new standard connectors that are backward compatible but add pins to support increased SuperSpeed signaling rates.
Recommended
USB 3.0
USB 3.0 allows for much faster data transfer speeds of up to 5Gbps, which is 10 times faster than USB 2.0. It includes improvements like increased power delivery and more efficient data streaming. USB 3.0 is backward compatible with previous standards and uses an additional set of pins in its connectors to separate the SuperSpeed signals from the standard USB 2.0 ones. The specification also optimized power efficiency through asynchronous notifications and lower idle power requirements.
USB 3.0 -Infinite Possibilities
USB 3.0 is the third major version of the Universal Serial Bus (USB) standard for interfacing computers and electronic devices. Among other improvements, USB 3.0 adds the new transfer rate referred to as SuperSpeed USB (SS) that can transfer data at up to 5 Gbit/s (625 MB/s), which is about ten times as fast as the USB 2.0 standard.
Universal serial bus(usb)
USB stands for Universal Serial Bus and was created in 1995-96 by several companies to provide a universal standard for connecting devices to computers. It allows for bi-directional communication between devices at high speeds up to 10Gbps for USB 3.1. USB has evolved over time from Low Speed USB 1.0 at 1.5Mbps to Super Speed USB 3.1 at 10Gbps. Key components include the host computer, hubs for connecting multiple devices, and any peripheral devices.
Introduction of USB 3.1
USB 3.1 provides faster data transfer speeds of up to 10Gbps, which is twice as fast as USB 3.0. It was created to meet the increasing needs for transferring large files like HD videos. USB 3.1 has two main goals - improved performance and backward compatibility with older USB standards. It uses a new reversible Type-C connector that allows for easier plugging and faster charging compared to previous connectors. Compliance testing also focuses on meeting the new electrical and transfer speed requirements for USB 3.1.
Usb 2
USB was developed in the mid-1990s to standardize connections between computers and peripherals like keyboards, mice, cameras and drives. It has several key features including being low cost, using a single connector type, and allowing for hot plugging of devices. USB operates using a star topology with a host controller connecting devices and hubs. Communication between devices and the host occurs through pipes that associate endpoints to software. Data is transmitted using a token phase, data phase and handshake phase over differential signal lines with encoding and error checking handled by the physical layer.
USB protocol
This document provides an introduction to USB (Universal Serial Bus). It discusses the original motivations for USB including flexibility, ease of use, and high speed data transfer. It describes the different USB speeds and the star topology of the USB bus. It explains that USB uses a host-controlled model and supports up to 127 devices connected at once. The document also covers USB packets, transactions, functions, endpoints, pipes, and the different types of transfers (control, interrupt, bulk, isochronous).
Universal Serial Bus (USB)
The document summarizes key aspects of the Universal Serial Bus (USB) standard. It discusses the history and evolution of USB, its architectural overview including host, hubs and devices, communication flow through pipes between host and devices, and the protocol layer involving different packet and transfer types. The document provides an overview of the USB standard to understand its functionality and implementation.
USB 3.0
USB 3.0 provides a 10x performance increase over USB 2.0 through a new dual-bus architecture that allows for faster SuperSpeed transfers while maintaining backward compatibility. It was developed to meet demands for faster transfer speeds to support devices like hard drives, flash drives, and optical drives. USB 3.0 introduces new standard connectors that are backward compatible but add pins to support increased SuperSpeed signaling rates.
Usb
This document provides an overview of the Universal Serial Bus (USB) standard. It discusses the history and development of USB from versions 1.0 to 3.1. Key points include that USB was designed in the 1990s to standardize connections between computers and devices, it has become common on many electronic devices, and newer versions have increased speed up to 10 Gbps for USB 3.1. The document also covers USB technical details like connectors, data transfer speeds, the device enumeration process, and the asymmetric star topology used.
Usb
The document discusses USB (Universal Serial Bus). It provides details on the history and development of USB, including its features and versions. It describes USB cables, connectors, ports and their uses. It also discusses USB pen drives, their advantages for data transfer and storage, and the top five uses of pen drives including file transfer between devices, backup storage, and adding memory via ReadyBoost.
Usb
Universal Serial Bus (USB) is an industry standard that defines cables, connectors and communication protocols for connection between computers and electronic devices. There are multiple USB standards, including USB 1.0, 2.0, and 3.0. The key USB components are the host controller, hubs, cables and peripheral devices. USB uses a tiered star topology to connect up to 127 devices and supports various transfer types. Descriptors contain device information and reside in non-volatile storage. Wireless USB builds on wired USB to enable wireless connectivity using ultra-wide band technology.
Usb Overview
The document discusses various topics related to USB including:
- USB standards and speeds such as USB 1.1, 2.0, 3.0, and Wireless USB.
- USB system architecture including north/south bridges and how USB fits into the system.
- USB protocol layers, descriptors, endpoints, interfaces, and common packet fields.
- USB transfer types including control, interrupt, isochronous, and bulk transfers.
- USB topology, device enumeration process, and how devices advertise their capabilities to the host through descriptors.
Usb protocol
Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices
USB Universal Serial Bus
The document summarizes the USB standard and enumeration process. It discusses that USB was developed in the 1990s by major tech companies as a standard cable and protocol for connecting devices. The 12 step enumeration process is then outlined, beginning with a device attaching to a port, the hub detecting it, the host learning about it and assigning an address, retrieving descriptors to identify the device and load appropriate drivers, and ultimately selecting a configuration so communication can begin.
USB Powerpoint
The USB was created in 1995 by several companies to provide a universal connection standard for computer devices. It was developed to address the problem of every new device requiring a unique serial port. The USB allows for cost effective and power efficient connections of devices through a small, durable port. While small USB drives can be easily misplaced, the USB standard provides versatility in connecting many types of devices, from keyboards to cameras. The USB standard has evolved from its initial 12 Mbps speed to today's 480 Mbps USB 2.0, with 5 Gbps USB 3.0 upcoming. Future developments may include wireless USB connections.
Usb
USB (Universal Serial Bus) allows electronic devices to connect to computers. It was created in 1995 to replace serial and parallel ports. There have been several versions with higher data transfer rates, from 1.5 Mbps in USB 1.0 to 5 Gbps in USB 3.0. USB hubs provide additional ports to connect multiple devices to a single computer port. Common USB devices include keyboards, mice, cameras, printers, and storage drives.
Universal serial bus
This document provides an overview of the Universal Serial Bus (USB) standard. It describes the key aspects of USB including its architectural overview as a tiered star topology, electrical and mechanical characteristics of USB connectors, the USB protocol layer and packet types, USB device framework including descriptors and data transfer types, and how USB interfaces are created. The document is intended to explain the fundamental concepts and specifications that define USB.
USB presentation by Mishuk
This document provides an overview of USB (Universal Serial Bus). It discusses what USB is, the need for USB, versions of USB including USB 1.x, 2.0, 3.0 and 3.1, types of USB ports, the USB architecture including devices, hosts and interconnects, data transmission over USB using transactions between endpoints and pipes, USB descriptors that provide device information, and common USB usages.
I2C And SPI Part-23
I²C (Inter-Integrated Circuit), pronounced I-squared-C, is a multi-master, multi-slave, single-ended, serial computer bus invented by Philips Semiconductor (now NXP Semiconductors). It is typically used for attaching lower-speed peripheral ICs to processors and microcontrollers. Alternatively I²C is spelled I2C (pronounced I-two-C) or IIC (pronounced I-I-C).
Since October 10, 2006, no licensing fees are required to implement the I²C protocol. However, fees are still required to obtain I²C slave addresses allocated by NXP.[1]
Several competitors, such as Siemens AG (later Infineon Technologies AG, now Intel mobile communications), NEC, Texas Instruments, STMicroelectronics (formerly SGS-Thomson), Motorola (later Freescale), and Intersil, have introduced compatible I²C products to the market since the mid-1990s.
SMBus, defined by Intel in 1995, is a subset of I²C that defines the protocols more strictly. One purpose of SMBus is to promote robustness and interoperability. Accordingly, modern I²C systems incorporate policies and rules from SMBus, sometimes supporting both I²C and SMBus, requiring only minimal reconfiguration.
The Serial Peripheral Interface (SPI) bus is a synchronous serial communication interface specification used for short distance communication, primarily in embedded systems. The interface was developed by Motorola and has become a de facto standard. Typical applications include sensors, Secure Digital cards, and liquid crystal displays.
SPI devices communicate in full duplex mode using a master-slave architecture with a single master. The master device originates the frame for reading and writing. Multiple slave devices are supported through selection with individual slave select (SS) lines.
Sometimes SPI is called a four-wire serial bus, contrasting with three-, two-, and one-wire serial buses. The SPI may be accurately described as a synchronous serial interface,[1] but it is different from the Synchronous Serial Interface (SSI) protocol, which is also a four-wire synchronous serial communication protocol, but employs differential signaling and provides only a single simplex communication channel.
USB 2.0
For further information or materials, please contact
VinChip Systems
Chennai
mail id : vinoth.ks@vinchip.com
USB Universal Serial Bus
USB was developed in 1994 by seven companies to make connecting external devices to PCs easier by standardizing connectors. It has since gone through several revisions to increase speed, with USB 3.0 providing speeds up to 5Gbps and USB 3.1 providing 10Gbps. USB has a tiered star topology centered on a host controller, usually the PC chipset, and uses pipes to manage communication between devices. It supports various transfer types and has become ubiquitous due to its convenience, high speeds, and ability to hot-plug devices without rebooting.
Usb
USB 2.0 allows for high-speed data transfer and easy plug-and-play connectivity between devices. It uses a star topology with a single host and up to 127 devices. Data flows bidirectionally through pipes between endpoints on devices and software on the host. The protocol layer handles translation between application data and USB transactions using packets identifying the transfer type and target endpoint.
Usb universal serial bus
This document provides an overview of USB, including its history and key versions. USB (Universal Serial Bus) allows connection of peripherals to computers. It has evolved from USB 1.0 with 1.5Mbps speeds to USB 2.0 at 480Mbps to the latest USB 3.0 offering data transfer rates up to 4.8Gbps. USB 3.0 features a single connector type, hot swapping, plug and play functionality, and high performance speeds. It supports connection of storage drives and other peripherals.
Type c cable introduction
Shenzhen Litkconn Technology (LITK) is one of the leading providers of precision connector solutions in China. We pride ourselves on providing our customers with the best connector products available and our customer service is second to none. We’re dedicated to helping our clients find the products best suited to their needs. Our partners are some of the biggest names in a diverse range of industries, including mobile and wireless communications, digital entertainment, hardware and peripherals, security, medicine, networking, heavy industry and many more.
Apb
The document describes the AMBA 3 APB protocol. It has an unpipelined design to reduce complexity and power consumption. Transfers take at least two cycles with the first being a setup phase and second an access phase controlled by the PENABLE signal. Slaves can extend transfers using the PREADY signal. Errors are indicated by PSLVERR. The protocol defines read and write transfers with or without wait states.
Usb
USB was developed in 1995 to provide an expandable, fast, and low-cost interface for connecting peripherals to computers. It allows devices to be automatically configured when connected. USB has gone through several versions, with USB 2.0 providing speeds up to 480 Mbps and USB 3.0 providing even faster speeds up to 5 Gbps through an improved cable design. USB allows up to 127 devices to connect to a single port and supplies power to low-power devices without an external power source. It has become widely used to connect devices like flash drives, external hard drives, printers, and more due to its convenience.
Serial Peripheral Interface
SPI (Serial Peripheral Interface) allows for high-speed synchronous serial communication between microcontrollers and peripheral devices. It uses three wires (MOSI, MISO, SCK) to transmit data serially from a master to a slave device. The master device generates a clock signal on SCK to synchronize data transfer. The SS pin is used to select a specific slave device when there are multiple slaves. Common applications of SPI include in-system programming of microcontrollers and communicating with sensors, memory, and other peripherals. An example shows how to use SPI to control LEDs on a slave microcontroller from a master using button inputs.
USB Type-C R1.1 Introduction
This document provides an overview and specifications for USB Type-C connectors and cables. It discusses the motivation for USB Type-C including making connectors smaller, more robust, and easier to use. The document then covers mechanical specifications for plugs, receptacles, and cable assemblies. It also discusses electrical characteristics, functional behaviors like configuration channel purposes and connection states, and extensions like alternate modes and audio adapter access.
FSP-KL DC Presentation
This document discusses document management and control. It defines document management as the process of creating, distributing, and deleting documents within an organization. It explains that document control ensures only the most current versions are accessed and used, and tracks the overall status of documents. Benefits of document management include improved productivity, reduced costs, enhanced knowledge sharing, and transparency. It provides examples of manual, paper-based, and semi-manual document control methods, and outlines steps to implement a document control system, including creating an identification numbering system, master index, and relevant procedures. Workflows for receiving, quality checking, and distributing documents to consultants are presented.
What is doe level 6
You can help to slow down global warming by choose FSP single-voltage External AC-DC power supplies which are complied with DOE Level VI .
More Related Content
What's hot
Usb
This document provides an overview of the Universal Serial Bus (USB) standard. It discusses the history and development of USB from versions 1.0 to 3.1. Key points include that USB was designed in the 1990s to standardize connections between computers and devices, it has become common on many electronic devices, and newer versions have increased speed up to 10 Gbps for USB 3.1. The document also covers USB technical details like connectors, data transfer speeds, the device enumeration process, and the asymmetric star topology used.
Usb
The document discusses USB (Universal Serial Bus). It provides details on the history and development of USB, including its features and versions. It describes USB cables, connectors, ports and their uses. It also discusses USB pen drives, their advantages for data transfer and storage, and the top five uses of pen drives including file transfer between devices, backup storage, and adding memory via ReadyBoost.
Usb
Universal Serial Bus (USB) is an industry standard that defines cables, connectors and communication protocols for connection between computers and electronic devices. There are multiple USB standards, including USB 1.0, 2.0, and 3.0. The key USB components are the host controller, hubs, cables and peripheral devices. USB uses a tiered star topology to connect up to 127 devices and supports various transfer types. Descriptors contain device information and reside in non-volatile storage. Wireless USB builds on wired USB to enable wireless connectivity using ultra-wide band technology.
Usb Overview
The document discusses various topics related to USB including:
- USB standards and speeds such as USB 1.1, 2.0, 3.0, and Wireless USB.
- USB system architecture including north/south bridges and how USB fits into the system.
- USB protocol layers, descriptors, endpoints, interfaces, and common packet fields.
- USB transfer types including control, interrupt, isochronous, and bulk transfers.
- USB topology, device enumeration process, and how devices advertise their capabilities to the host through descriptors.
Usb protocol
Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices
USB Universal Serial Bus
The document summarizes the USB standard and enumeration process. It discusses that USB was developed in the 1990s by major tech companies as a standard cable and protocol for connecting devices. The 12 step enumeration process is then outlined, beginning with a device attaching to a port, the hub detecting it, the host learning about it and assigning an address, retrieving descriptors to identify the device and load appropriate drivers, and ultimately selecting a configuration so communication can begin.
USB Powerpoint
The USB was created in 1995 by several companies to provide a universal connection standard for computer devices. It was developed to address the problem of every new device requiring a unique serial port. The USB allows for cost effective and power efficient connections of devices through a small, durable port. While small USB drives can be easily misplaced, the USB standard provides versatility in connecting many types of devices, from keyboards to cameras. The USB standard has evolved from its initial 12 Mbps speed to today's 480 Mbps USB 2.0, with 5 Gbps USB 3.0 upcoming. Future developments may include wireless USB connections.
Usb
USB (Universal Serial Bus) allows electronic devices to connect to computers. It was created in 1995 to replace serial and parallel ports. There have been several versions with higher data transfer rates, from 1.5 Mbps in USB 1.0 to 5 Gbps in USB 3.0. USB hubs provide additional ports to connect multiple devices to a single computer port. Common USB devices include keyboards, mice, cameras, printers, and storage drives.
Universal serial bus
This document provides an overview of the Universal Serial Bus (USB) standard. It describes the key aspects of USB including its architectural overview as a tiered star topology, electrical and mechanical characteristics of USB connectors, the USB protocol layer and packet types, USB device framework including descriptors and data transfer types, and how USB interfaces are created. The document is intended to explain the fundamental concepts and specifications that define USB.
USB presentation by Mishuk
This document provides an overview of USB (Universal Serial Bus). It discusses what USB is, the need for USB, versions of USB including USB 1.x, 2.0, 3.0 and 3.1, types of USB ports, the USB architecture including devices, hosts and interconnects, data transmission over USB using transactions between endpoints and pipes, USB descriptors that provide device information, and common USB usages.
I2C And SPI Part-23
I²C (Inter-Integrated Circuit), pronounced I-squared-C, is a multi-master, multi-slave, single-ended, serial computer bus invented by Philips Semiconductor (now NXP Semiconductors). It is typically used for attaching lower-speed peripheral ICs to processors and microcontrollers. Alternatively I²C is spelled I2C (pronounced I-two-C) or IIC (pronounced I-I-C).
Since October 10, 2006, no licensing fees are required to implement the I²C protocol. However, fees are still required to obtain I²C slave addresses allocated by NXP.[1]
Several competitors, such as Siemens AG (later Infineon Technologies AG, now Intel mobile communications), NEC, Texas Instruments, STMicroelectronics (formerly SGS-Thomson), Motorola (later Freescale), and Intersil, have introduced compatible I²C products to the market since the mid-1990s.
SMBus, defined by Intel in 1995, is a subset of I²C that defines the protocols more strictly. One purpose of SMBus is to promote robustness and interoperability. Accordingly, modern I²C systems incorporate policies and rules from SMBus, sometimes supporting both I²C and SMBus, requiring only minimal reconfiguration.
The Serial Peripheral Interface (SPI) bus is a synchronous serial communication interface specification used for short distance communication, primarily in embedded systems. The interface was developed by Motorola and has become a de facto standard. Typical applications include sensors, Secure Digital cards, and liquid crystal displays.
SPI devices communicate in full duplex mode using a master-slave architecture with a single master. The master device originates the frame for reading and writing. Multiple slave devices are supported through selection with individual slave select (SS) lines.
Sometimes SPI is called a four-wire serial bus, contrasting with three-, two-, and one-wire serial buses. The SPI may be accurately described as a synchronous serial interface,[1] but it is different from the Synchronous Serial Interface (SSI) protocol, which is also a four-wire synchronous serial communication protocol, but employs differential signaling and provides only a single simplex communication channel.
USB 2.0
For further information or materials, please contact
VinChip Systems
Chennai
mail id : vinoth.ks@vinchip.com
USB Universal Serial Bus
USB was developed in 1994 by seven companies to make connecting external devices to PCs easier by standardizing connectors. It has since gone through several revisions to increase speed, with USB 3.0 providing speeds up to 5Gbps and USB 3.1 providing 10Gbps. USB has a tiered star topology centered on a host controller, usually the PC chipset, and uses pipes to manage communication between devices. It supports various transfer types and has become ubiquitous due to its convenience, high speeds, and ability to hot-plug devices without rebooting.
Usb
USB 2.0 allows for high-speed data transfer and easy plug-and-play connectivity between devices. It uses a star topology with a single host and up to 127 devices. Data flows bidirectionally through pipes between endpoints on devices and software on the host. The protocol layer handles translation between application data and USB transactions using packets identifying the transfer type and target endpoint.
Usb universal serial bus
This document provides an overview of USB, including its history and key versions. USB (Universal Serial Bus) allows connection of peripherals to computers. It has evolved from USB 1.0 with 1.5Mbps speeds to USB 2.0 at 480Mbps to the latest USB 3.0 offering data transfer rates up to 4.8Gbps. USB 3.0 features a single connector type, hot swapping, plug and play functionality, and high performance speeds. It supports connection of storage drives and other peripherals.
Type c cable introduction
Shenzhen Litkconn Technology (LITK) is one of the leading providers of precision connector solutions in China. We pride ourselves on providing our customers with the best connector products available and our customer service is second to none. We’re dedicated to helping our clients find the products best suited to their needs. Our partners are some of the biggest names in a diverse range of industries, including mobile and wireless communications, digital entertainment, hardware and peripherals, security, medicine, networking, heavy industry and many more.
Apb
The document describes the AMBA 3 APB protocol. It has an unpipelined design to reduce complexity and power consumption. Transfers take at least two cycles with the first being a setup phase and second an access phase controlled by the PENABLE signal. Slaves can extend transfers using the PREADY signal. Errors are indicated by PSLVERR. The protocol defines read and write transfers with or without wait states.
Usb
USB was developed in 1995 to provide an expandable, fast, and low-cost interface for connecting peripherals to computers. It allows devices to be automatically configured when connected. USB has gone through several versions, with USB 2.0 providing speeds up to 480 Mbps and USB 3.0 providing even faster speeds up to 5 Gbps through an improved cable design. USB allows up to 127 devices to connect to a single port and supplies power to low-power devices without an external power source. It has become widely used to connect devices like flash drives, external hard drives, printers, and more due to its convenience.
Serial Peripheral Interface
SPI (Serial Peripheral Interface) allows for high-speed synchronous serial communication between microcontrollers and peripheral devices. It uses three wires (MOSI, MISO, SCK) to transmit data serially from a master to a slave device. The master device generates a clock signal on SCK to synchronize data transfer. The SS pin is used to select a specific slave device when there are multiple slaves. Common applications of SPI include in-system programming of microcontrollers and communicating with sensors, memory, and other peripherals. An example shows how to use SPI to control LEDs on a slave microcontroller from a master using button inputs.
USB Type-C R1.1 Introduction
This document provides an overview and specifications for USB Type-C connectors and cables. It discusses the motivation for USB Type-C including making connectors smaller, more robust, and easier to use. The document then covers mechanical specifications for plugs, receptacles, and cable assemblies. It also discusses electrical characteristics, functional behaviors like configuration channel purposes and connection states, and extensions like alternate modes and audio adapter access.
What's hot (20)
Viewers also liked
FSP-KL DC Presentation
This document discusses document management and control. It defines document management as the process of creating, distributing, and deleting documents within an organization. It explains that document control ensures only the most current versions are accessed and used, and tracks the overall status of documents. Benefits of document management include improved productivity, reduced costs, enhanced knowledge sharing, and transparency. It provides examples of manual, paper-based, and semi-manual document control methods, and outlines steps to implement a document control system, including creating an identification numbering system, master index, and relevant procedures. Workflows for receiving, quality checking, and distributing documents to consultants are presented.
What is doe level 6
You can help to slow down global warming by choose FSP single-voltage External AC-DC power supplies which are complied with DOE Level VI .
Pc power supply +12 v distribution
The +12V output is very important in PC power supplies because the CPU and VGV both require a +12V input.
The +12V output can be subdivided into a single +12V rail and multiple +12V rails.
Ipc ps2 redundant introduction
This document describes the FSP500-70RGHBB1 redundant power supply for servers. It is a 500W power supply in a PS2 form factor that does not require a front bracket, making it suitable for tower and 3/4U chassis. Each module can provide 500W of power and support hot swapping. If one module fails, the other can instantly take over without interrupting the server. The power supply has features like 80 Plus Gold efficiency, PMBus support, and protections. It is presented as a reliable and easy to install redundant power solution for home and enterprise servers.
FSP Cable Management IPC PSU
Why Uses Cable Management IPC PSU?
-Better cable management
-Lower temperature
-Space saving
-Easy PSU removal
Why you need a higher efficiency power supply
FSP has the largest number of 80+ certified products
in the world.The more FSP power supply are used in the equipment, the more energy will be saved worldwide.
FSP Retail PC PSU : HYGRO Series
HYGRO Series : FSP HYGRO Series is designed for the need of general gamers who need good performance at affordable prices.
By 230V 80PLUS bronze certification, its efficiency can be reached up to 88% at typical loading.
The powerful single +12V rail design provides stable power to your hungry graphic cards while you play games.
Gamers are easy to install all cables to all system components through motherboard tray in the back of chassis by ribbon cable design.
Furthermore, wide input AC mains range design, give gamers a reliable design for any unstable voltage condition.
FSP Retail PC PSU : HYDRO G Series
HYDRO G Series : FSP Hydro G Series are the world first one PSU break the rule and makes it as a standard to gamers. With three colors, it is easy to create your theme related to VGA cards.
FSP Retail PC PSU : HYPER M Series
HYPER M Series : HYPER M Series features semi-modular and 2 sets above 6+2 pin connectors, with 85% efficiency. It must be a best choice to your limited budget gaming system!
FSP smart energy for smart home
PV+ESS=Micro Grid ≈ Smart Grid
Micro-grids present the opportunity for countries to develop a cell-phone type of model for power distribution whereby regions without certification can have a regional power source that allows for local access.
This market is projected to become signification in the next several years, as the access to lower cost PV markets this option more easily implemented.
PoE Power Introduction
PoE application brings many advantages to an installation:
1.Time & cost saving: reduce the time and money without installing electrical power
2.Flexibility: the end device, e.g. IP Camera or wireless access point (AP) can be located everywhere without being tethered to an electrical outlet.
3.Safety: PoE Delivery is designed to protect network equipment from overload, underpowering and incorrect installation. Furthermore, it can be backed-up by UPS to increase the reliability.
4.Smart Power Budget: Compliant with Power Classification , the PSE could allocate power budget for other PDs, whereby a (or more) PD indicates that it complies with power class 2 (max. 6,49 watts) or class 1 (max. 3.84W), but not class 3 (max. 12.95W). Inplementing this scheme, the PSE Device (PoE Switch) could support more PDs (e.g. IP Phones or IP Camera).
How to select a suitable led driver
This document provides guidance on selecting an appropriate LED driver by considering several key factors:
- Choose between a constant current or constant voltage driver based on the lighting requirements. Consider the output current or voltage and how it meets the light's needs.
- Consider the maximum wattage requirement of the light and match it to the driver's output. Also match the driver's input voltage range to the location where the light will be used.
- Determine if dimming is needed and if so, what type of dimming compatibility is required.
- Check that the driver has the appropriate IP rating for protection against environmental factors like water and dust.
FSP offers a wide range of LED drivers for various
FSP one inch height adapter
The document discusses FSP's new 1 inch-height adapter series which offers benefits of a more compact size, lighter weight and ease of portability compared to normal sized adapters. It provides specifications for 90W, 120W and 150W models that output voltages of 12V, 19V, 24V, 48V and 54V and have applications in areas like POS, surveillance, NAS, gaming and 3D printing where space is limited. The 1 inch form factor is nearly half the thickness of normal adapters.
IEC 60601-1 Medical Power Safety Requirement
IEC 60101-1 is basic certificate for the general purpose as below items :
MEDICAL ELECTRICAL EQUIPMENT
MEDICAL ELECTRICAL SYSTEMS: Assembled by several medical electrical equipment
Components that is used in above equipment
FSP Retail Adapter : NB H
NB H Series : The universal adapter NB H Series is a combination of adapter and USB Hub.With multiple embedded USB 3.0 ports, it adds more convenience as an excellent solution for ultra-books an slim laptops users.
FSP Retail Adapter : Twinkle 65
FSP Twinkle 65 Universal Notebook Adapter is the smallest & lightest 65W adapter in the world. The unique and considering design is to lighten your way and charge your mobile life like never before.
FSP QC2.0 Car Charger
FSP QC2.0 Car Charger : FSP Shining 16 car charger is certified by Qualcomm's standard class A. When it charges a QC 2.0 enabled device, it can charge up to 75% faster than normal ones, and save your precious time.
DALI (Digital Addressable Lighting Interface)
DALI is a protocol.
An International Standard (IEC 62386) lighting control system providing a single interface for all Electronic Control Gears and Electronic Control Devices.
To know a microinverter powered by fsp
Benefits on microinverter:
Reliability, reduce single point of failure form series to parallel
Efficiency, individual Maximum Power Point Tracking : More power generated, up to 16% (average)
Saving, reduce the system impact by shadow affect ; lower operation fee
Silent, good efficiency without fan cooling
Secure, lower DC voltage to secure your property
Easy to identified the failure parts and their location
Scalability for residential, commercial and even a power plant
Viewers also liked (19)
Similar to USB PD Introduction
Study of evolution in different charger pins
This document discusses the evolution of mobile phone chargers from 1980s nickel-cadmium battery chargers that took 10 hours to charge to modern chargers. It covers various charger types including wall chargers, USB chargers, wireless chargers, solar chargers, and car chargers. The document also examines different charging port types and proposes a universal charger design that uses a magnetic USB-C cable and detachable magnetic adapters to charge devices of any port type. The proposed charger brick would have a variable output to match a device's power needs.
Track 2 session 5 - st dev con 2016-usb type c with pd
The document discusses USB Type-C and USB Power Delivery (USB PD). It provides an overview of how USB has evolved from a data interface to also being a primary provider of power. USB Type-C enables more flexibility, power up to 100W, additional protocols via alternate modes, and faster data speeds of 10Gbps. ST offers USB Type-C and USB PD controller solutions that provide flexibility and compliance with standards.
wireless usb.pptx
This document summarizes wireless USB technology. Wireless USB allows devices like printers, mice, hard drives and cameras to connect to computers within 10 meters without wires. It maintains the same performance as wired USB. Wireless USB uses ultra-wide band radio and is backward compatible with existing USB devices and drivers. It enables easy migration from wired to wireless connections and has applications in homes and offices for connecting devices like DVD players, printers and projectors without cables. While wireless connectivity provides flexibility, security must be properly implemented to prevent unauthorized access to data over the wireless connection.
Wireless usb
This document discusses wireless USB (WUSB) technology. It provides an abstract that describes WUSB as a short-range, high-bandwidth wireless protocol based on Ultra-Wide Band technology. WUSB can connect a host to multiple peripherals simultaneously at speeds up to 480 Mb/s within 3 meters or 110 Mb/s within 10 meters. The document includes sections on the advantages and disadvantages of WUSB, diagrams, hardware requirements, its evolution, and conclusions. It aims to explain WUSB and its capabilities to send data wirelessly between devices.
Wireless USB report
Wireless USB (WUSB) allows USB devices to connect without cables. It uses ultra-wideband radio technology to transmit data at speeds up to 480 Mbps within a 10 meter range. WUSB maintains the same architecture and compatibility as wired USB, allowing for easy migration. It will bring wireless connectivity to devices like printers, hard drives, cameras and displays. WUSB aims to eliminate cables while providing a fast, standardized wireless connection for USB devices.
Air live wl-5460ap-v2_specsheet
- The AirLive WL-5460AP v2 is a multi-function wireless access point that supports 8 operation modes including AP, bridge, client, and repeater modes.
- It has features such as detachable antennas, security options like WPA/WPA2, and wireless client isolation.
- The access point supports adjustments for ACK timeout and TX power levels to optimize wireless performance and range.
Usb Pinout
USB (Universal Serial Bus) is a standard connection method for devices to connect to each other and PCs. It uses 4 wires - two for power and two for differential data transmission. USB supports various transfer modes and speeds up to 480 Mbps. It allows for up to 127 devices to connect to a single host in a tiered structure using hubs. USB provides power for low-power devices and includes specifications for voltage, current limits, and cable construction.
Seminar
The document is a seminar report on Wireless USB presented by Soumyodeep Karmakar. It discusses the key details of Wireless USB including its high-level architecture, radio environment using UWB, WiMedia PHY and MAC layers, topology, power management, and performance capabilities. The report provides an overview of Wireless USB as an evolution of wired USB that enables wireless connectivity while maintaining compatibility and delivering high speeds of up to 480 Mbps initially.
How USB Ports Work.pdf
https://peoplelaptop.com/how-usb-ports-work/
How USB Ports Work: The Tiny Tech Powerhouse.Today, we're going on a deep dive into the world of USB ports, exploring their inner workings and what makes them so darn useful.
Wireless usb
Wireless USB allows devices to connect to computers without cables at speeds up to 480 Mbps, comparable to USB 2.0. It uses radio frequency waves over a 10 meter range to connect devices like printers, hard drives, and cameras in a simple and low-cost way. Wireless USB maintains the USB architecture and connectivity models to provide an easy migration path from wired USB. It provides the same security and performance as a wired connection with the advantage of cable-free use of devices.
Super speed usb3.0
The document discusses USB 3.0 (SuperSpeed USB), which provides data transfer rates of up to 5 Gbps, compared to USB 2.0's maximum of 480 Mbps. It introduces USB 3.0 and its history, components like hosts and hubs, key features such as backward compatibility, and advantages like higher speeds and power efficiency. The document also compares USB 3.0 and USB 2.0 specifications and notes USB 3.0's dual-bus architecture that runs USB 2.0 and SuperSpeed buses in parallel.
Usb In-a-Nutshell
This document provides an overview and summary of the USB standard to help readers understand its key aspects without having to read the entire 650-page specification. It discusses the various chapters and topics covered in the standard, highlighting those most relevant to hardware designers and software developers. These include device enumeration, transfer types, connector and electrical specifications. The document aims to explain USB's fundamental principles at a high level in order to develop a basic grasp of how to implement USB devices.
Usb In A Nutshell
This document provides a summary of the USB standard, intended to help readers understand the key aspects without having to read the entire lengthy specification. It breaks down the USB standard into chapters and explains which sections are most important for designers of different USB device types to understand. The summary highlights that peripheral hardware designers especially need to understand the architectural overview, data flow model, mechanical connectors, and electrical specifications. It also introduces some of the basic concepts of USB including speeds, topology, transfer modes, and connectors.
Introduction to nSTS Samsung Tablet Adapters with Docking Detect
LAVA Computer MFG. INC., a manufacturer of interfaces for mobile devices and computers, has launched a new line of SAMSUNG tablet adapters, nSTS. These adapters use LAVA’s patented SimulCharge technology that allows tablets to support USB accessories while charging, and now features the newly developed Docking Detect capability which lets your tablet operate with plug-n-play ease.
The new line of nSTS adapters supports a plethora of power options from USB Power Brick, PoE and AC Power Brick. It also includes a wide variety of products which feature Wired Network and up to 3x USB port capabilities. LAVA’s nSTS is delivering even more tablet kiosk flexibility to your applications.
With Docking Detect you can plug and unplug your tablet from its enclosure and it will reliably connect power and USB peripherals every time. Gain plug-n-play flexibility using nSTS in your point of sales, quality control or transportation applications.
nSTS adapters are a natural extension of LAVA’s existing line of Simulcharge adapters that enhance the possibilities of regular tablet kiosks. With the new nSTS line, your users can enjoy multi-purpose connectivity for an enriched tablet kiosk experience.
Please do not hesitate to contact LAVA at sales@lavalink.com if you require more information, have any questions or are interested in beginning a conversation. To learn more about who we are, what we value and how our products can help you, please visit our website www.lavalink.com for more information.
Usb in-a-nutshell
The document provides an overview of the USB standard and its various specifications in order to help readers understand the key aspects of USB without having to read the entire lengthy standard document. It summarizes each chapter of the USB 2.0 specification, highlighting which chapters are most important for designers of USB devices, drivers, and peripherals. The document also introduces some of the essential concepts of USB including its topology, speeds, connectors, and electrical signaling.
Wireless USB
Wireless USB products are finally arriving at the market and in this article you will learn more about this technology and see some usage examples. The goals of wireless USB is to connect peripherals such as printers, externals hard disk drives, sound cards, media players and even video monitors to the PC wirelessly. This can be done by to forms.
If the PC and the device don’t have native support to WUSB, you must install a dongle to convert are standard USB ports in to WUSB.
The maximum theoretical transfer rate from WUSB in this same as USB 2.0:480mpbs if the device is within 3 meters from the PC or 110mpbs from the PC. As you can see, the more distant the devices are from the PC, lower is the transfer rate.
Bluetooth is another wireless technology that allows the connection between the PC and peripherals without wires. At this time, however, Bluetooth is targeted to low speed devices only, as its maximum transfer rate is of 1 Mpbs (128 kb\s) or 3Mpbs (384MB\s), depending on the Bluetooth generation.
The next Bluetooth generation is scheduled to have the same transfer rate as WUSB, but this technology is not yet available. Wireless USB works on the UWB frequency range, while Bluetooth technology works on 2.4GHz frequency, the same use by IEEE 802.11 wireless network.
Android usb audio
The document discusses USB audio capabilities on Android devices. It explains that USB On-The-Go (OTG) allows Android devices to function as either a USB host or peripheral, enabling them to connect to and exchange data with other devices. It also describes how USB OTG and Accessory Charger Adapter specifications determine whether an Android device provides or receives power when connected via USB. Finally, it notes that standard USB audio support on Android devices could make high-fidelity external DACs accessible to more users.
Lifi
This document describes a LiFi-based system for bidirectional data transfer between two Android mobile devices using visible light communication. The system uses a USB interface module connected to the mobile devices to transmit data signals to LED lights and receive data from photodiodes. It allows the mobile devices to exchange local data files with each other simultaneously. The system hardware includes a USB interface chip and LED/photodiode components. The software application manages the data transmission between the mobile devices over the USB interface and visible light channels.
AN Type C ESD and EMI
The document discusses USB Type-C, including its power supply capabilities, differential lines, and alternate modes. It notes the constraints faced in protecting high-speed differential lines, including maintaining sufficient bandwidth and common mode rejection. STMicroelectronics provides solutions for power supply protection, configuration line protection, and differential line ESD protection. Solutions aim to minimize impact on signal transmission while providing robust ESD and EOS protection.
RAJESH1.pptx
Wireless USB (WUSB) allows devices like printers, mice, hard drives and cameras to connect to computers without wires. It uses ultra-wide band radio technology to transmit data at speeds comparable to USB. WUSB provides wireless connectivity within 10 meters and does not require line of sight. It offers advantages over wired USB like mobility and easy plug-and-play installation. However, security and reception can be issues depending on the environment. The presentation predicted WUSB would be widely adopted in laptops and devices by 2010.
Similar to USB PD Introduction (20)
Track 2 session 5 - st dev con 2016-usb type c with pd
Track 2 session 5 - st dev con 2016-usb type c with pd
Introduction to nSTS Samsung Tablet Adapters with Docking Detect
Introduction to nSTS Samsung Tablet Adapters with Docking Detect
More from FSP Technology Inc.
FSP open frame PoE Power Solutions
FSP launched the FSP420-2F47-A54H dual-output open frame power supply with 14 CMF forced air cooling and a conditional maximum output power of 420W; it is suitable for PoE switch and NVR applications.
FSP 252W fan less battery charger
#FSP provides #charger products with high performance, high reliability, as well as powerful heat dissipation that are programmable and have fully protected designs.
FSP IPC customized NUC power supply
As people’s taste for life improves, their requirements for hardware equipment is no longer just the aesthetics alone, but also its compactness; in many homes or personal working environments, heavy traditional computers are gradually being replaced by small NUCs (Next Unit of Computing).
FSP Adapter for most PoE Applications
The commercialization of 5G drove the rapid development of IoT and also created a variety of new applications due to the needs for smart surveillance and edge computing; however, power transmission cannot be deployed for all applications.
FSP 350W Open Frame Power Supply
FSP's 350W open frame power supply is suitable for Information Products, Networking, PoE, Embedded Systems, etc.
FSP home healthcard medical adapter
This medical-grade power adapter is designed for safety in home healthcare environments. It has wide input voltage range of 85-264VAC, is double insulated, meets various safety standards including IEC 60601-1-11, and provides overvoltage, overcurrent and short circuit protections for connected medical devices. It is suitable for powering devices like patient monitors, pulse oximeters, and electric sphygmomanometers.
FSP Eco-series UPS
Eco series provides battery backup and surge protection for computers and devices. It can supply power during outages and allow safe shutdown of equipment. It also charges mobile devices through a USB port. Models range from 400VA to 800VA capacity and include features like wall mounting, surge protection, and automatic voltage regulation and restart. They provide backup power for laptops and protect workstations and small office equipment from power issues.
FSP Ultra-Slim Adapter 330W
This document summarizes an ultra-slim 330W fanless power adapter from FSP Technology. The adapter has a 27mm slim design, fanless construction for reduced noise, and dust-proof enclosure. It provides overcurrent, overtemperature, and overvoltage protection and meets various safety certifications. The adapter is suitable for powering devices such as IPC systems, visual computing systems, embedded systems, and more.
FSP iFP-series Intelligent UPS
The document describes an intelligent UPS system called the iFP series that provides automatic voltage regulation, backup power during outages, and automatic battery charging when power is restored. It has a touch LCD display, USB and network ports, and supports equipment like laptops, VoIP phones, routers, and surveillance systems. Key features include compact size, microprocessor control, voltage stabilization, automatic restart, simulated sine wave output, off-mode charging, cold start, and generator compatibility.
FSP Flex ATX power supply
FSP has great advantages in the Flex ATX power supply product markets; most of these products complies with 80PLUS efficiency requirement, ratings ranging from bronze to platinum.
Ultra high power density CRPS
FSP Technology Inc. produces high power density computer power supply modules ranging from 550W to 1600W, including a forthcoming 2200W module. The document describes FSP's 1600W CRPS module which achieves a power density of 47.6 W/inch3, higher than comparable products. It also notes that FSP's 2U CRPS series uses unique active PFC circuitry design making it suitable for industrial environments and applications such as servers, workstations, and automation.
FSP SSL IOT 50W
The document describes an IoT-ready smart lighting driver from FSP Technology Inc. that allows communication with buildings via the latest IoT interface. The driver provides feedback on power consumption in real time and allows 1-100% light adjustment through a smart sensor. It complies with Enlighted communication protocols and sensors, has a 100,000 hour service life, 0.97 power factor correction, and safety certifications from Europe and America.
Ultra High Power Density CRPS
FSP Technology Inc. produces high power density computer power supply modules ranging from 550W to 1600W, including a planned 2200W module. The document describes FSP's 1600W CRPS module which achieves a power density of 47.6 W/inch3, higher than competitors. It also lists features such as firmware updates, safety certifications, and support for clockwise/counter-clockwise fans and parallel connection of up to 4 power supply units. Applications include servers, workstations, communications equipment, and automation systems.
Strong Power for Cryptocurrency Mining/HPC/GPGPU Systems
This document provides specifications for the FSP2000-A0AGPBI power supply unit. It can provide up to 2000W of power output and supports 16 graphics cards through its PCI-E connectors. The PSU meets 80Plus Platinum efficiency standards and is suitable for cryptocurrency mining and other high-performance computing applications due to its stable power output, modular design, and ability to operate under high temperatures.
FSP C14 AC Inlet Medical Adapter
This document summarizes a series of AC/DC switching power supplies with C14 AC inlets ranging from 65W to 150W output. The power supplies feature high efficiency compliant with DOE Level VI standards, compact dimensions, and can operate at high altitudes up to 5000 meters. They are designed for use in various medical equipment applications.
Battery Backup Medical Power
The document discusses battery backup power supply options from FSP Technology that provide continuous electricity during power outages for medical equipment. The battery backup systems comply with relevant safety and EMC standards and come in various form factors like standard ATX power supplies or box power units that can be built into medical devices. They feature real-time power failure detection and battery status monitoring via USB or SMBus interfaces. The battery backup medical power supplies are suitable for equipment that requires uninterrupted power like anesthesia systems, dialysis machines, and medical carts.
FSP USB PD Adapter
This document describes a USB Power Delivery adapter that can integrate multiple adapters into one unit to provide high power output density. It supports charging new Macbook Pro and Nintendo Switch devices at full speed through its USB Type-C port. The adapter automatically detects connected devices and provides the most efficient current and output to compatible smartphones, tablets, laptops and computers.
1 inch height series adapter
This document describes FSP's 1 inch-height series power adapters that range from 90W to 180W. The adapters are compact at only 1 inch in height, lightweight, and easy to carry. They have universal AC input and provide multiple DC output voltages and connector types. The adapters are intended for use in IPC systems, embedded systems, and various applications including POS systems, networking equipment, and more. They meet various safety and reliability standards.
IEC 60601 1-2 4th edition
IEC 60601-1-2 applies to the electromagnetic compatibility (EMC) of electrical medical equipment.
IEC 60101-1-2 4th edition was released in 2014 and will be required after December 31st, 2018.
There are some large changes with the EMC requirements which will have an effect on medical power supplies and Medical Electrical Equipment (ME)
How to Determine PSUs Efficiency
What’s the Benefit of Efficiency:
ECO Friendly
Efficient power supplies directly save 85 kWh per desktop PC per year, and 300 kWh per server per year.
Increased System Reliability
reduced heat output increases computer system reliability by up to 40%.
Decreased System Maintenance Costs
Increased reliability reduces costly repairs, IT support and lost worker productivity.
Increased Comfort Reduced heat output minimizes the need for noisy PC fans, making for a quieter and more productive office environment.
More from FSP Technology Inc. (20)
Strong Power for Cryptocurrency Mining/HPC/GPGPU Systems
Strong Power for Cryptocurrency Mining/HPC/GPGPU Systems
Recently uploaded
SOLIDWORKS 2024 Enhancements eBook.pdf for beginners
Wonder and help in everyway to know in details easily
1比1复刻澳洲皇家墨尔本理工大学毕业证本科学位原版一模一样
原版一模一样【微信：741003700 】【澳洲皇家墨尔本理工大学毕业证本科学位】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
按照学校原版(Birmingham文凭证书)伯明翰大学|学院毕业证快速办理
加急购买全套证件文凭【微信:176555708】【(Birmingham毕业证书)伯明翰大学|学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UQ文凭证书)昆士兰大学毕业证如何办理
毕业原版【微信:176555708】【(UQ毕业证书)昆士兰大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
LORRAINE ANDREI_LEQUIGAN_GOOGLE CALENDAR
Google Calendar is a versatile tool that allows users to manage their schedules and events effectively. With Google Calendar, you can create and organize calendars, set reminders for important events, and share your calendars with others. It also provides features like creating events, inviting attendees, and accessing your calendar from mobile devices. Additionally, Google Calendar allows you to embed calendars in websites or platforms like SlideShare, making it easier for others to view and interact with your schedules.
一比一原版(ANU文凭证书)澳大利亚国立大学毕业证如何办理
加急办理国外文凭【微信:176555708】【(ANU毕业证书)澳大利亚国立大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR
In this session delivered at NDC Oslo 2024, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
一比一原版(KCL文凭证书)伦敦国王学院毕业证如何办理
毕业原版【微信:176555708】【(KCL毕业证书)伦敦国王学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Greenwich文凭证书)格林威治大学毕业证如何办理
毕业原版【微信:176555708】【(Greenwich毕业证书)格林威治大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UVic文凭证书)维多利亚大学毕业证快速办理
不能毕业办理文凭'毕业证购买'【微信:176555708】【(UVic毕业证书)维多利亚大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(USD文凭证书)圣地亚哥大学毕业证快速办理
官方原版办理成绩单ps【微信:176555708】【(USD毕业证书)圣地亚哥大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Adelaide文凭证书)阿德莱德大学毕业证如何办理
学校原版办理海外认证【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(QU文凭证书)皇后大学毕业证快速办理
补办学校邮寄信封【微信:176555708】【(QU毕业证书)皇后大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(Columbia文凭证书)哥伦比亚大学毕业证快速办理
快速办理假学位证【微信:176555708】【(Columbia毕业证书)哥伦比亚大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Adelaide文凭证书)阿德莱德大学毕业证如何办理
毕业原版【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Monash文凭证书)莫纳什大学毕业证如何办理
毕业原版【微信:176555708】【(Monash毕业证书)莫纳什大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(SUT文凭证书)斯威本科技大学毕业证快速办理
退学办理电子版【微信:176555708】【(SUT毕业证书)斯威本科技大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(Greenwich文凭证书)格林威治大学毕业证快速办理
出售买大学文凭【微信:176555708】【(Greenwich毕业证书)格林威治大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(KCL文凭证书)伦敦国王学院毕业证快速办理
咨询办理ps毕业证【微信:176555708】【(KCL毕业证书)伦敦国王学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UOL文凭证书)利物浦大学毕业证如何办理
毕业原版【微信:176555708】【(UOL毕业证书)利物浦大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recently uploaded (20)
SOLIDWORKS 2024 Enhancements eBook.pdf for beginners
SOLIDWORKS 2024 Enhancements eBook.pdf for beginners
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR
USB PD Introduction
- 2. What is USB PD? USB PD means : Universal Serial Bus Power Delivery Specification
- 3. How many chargers in your daily life? Today many devices charge or get their power from USB ports contained in laptops, cars, aircraft or even wall sockets. USB has become a ubiquitous power socket for many small devices such as cell phones, MP3 players and other hand-held devices. Source：USB-IF website
- 4. Integrate “N” to ONE The USB Power Delivery Specification enables the maximum functionality of USB by providing more flexible power delivery along with data over a single cable. Its aim is to operate with and build on the existing USB ecosystem. Source：USB-IF website FSP USB PD Adapter
- 5. Taking a great idea and making it even better 2.5W 4.5W 7.5W 65W 100W USB Power Delivery – 2.0 Introduction USB Power Delivery USB 2.0 USB 3.0 USB BC 1.2 Extend ease of use, reduce clutter, reduce even more waste
- 6. USB power delivery features • Increased power levels from existing USB standards up to 100W. • Power direction is no longer fixed. • Optimize power management across multiple peripherals by allowing each device to take only the power it requires, and to get more power when required for a given application. • Intelligent and flexible system level management of power via optional hub communication with the PC. • Allows low power cases such as headsets to negotiate for only the power they require.
- 7. USB PD power profile definition 2A, 10W 2A, 10W 2A, 10W 2A, 10W 2A, 10W 1.5A, 18W 3A, 36W 3A, 36W 3A, 36W 3A, 60W 5A, 100W Profile 1 Profile 2 Profile 3 Profile 4 Profile 5 +5V +12V +20V
- 8. FSP060-D1AP4 FSP060-D1AR4 Output voltage 5V/12V/20V 5V/12V/20V Output current 5V/2A;12V/3A;20V/3A 5V/2A;12V/3A;20V/3A Output power Profile 4 Without DC cable Profile 4 With DC cable Dimension 92*77.3*25.4mm 92*77.3*25.4mm AC Inlet C14 C14 Efficiency Meet DOE level 6 Meet DOE level 6 FSP PD adapter specification