Ultrasonic testing is completely nondestructive and safe, and it is a well established test method in many basic manufacturing, process, and service industries, especially in applications involving welds and structural metals.
Scope of NDT testing in industries.Details about power plant inspection,rope inspection,storage tank inspection,future scope of NDT,Aircraft inspection,history of NDT,Industrial Area,conclusion
this paper presentation on " Non-destructive testing " which meant that as the name indicated that testing the material without destroying them is called as Non-destructive testing. so the purpose of NDT is used to evaluate any types of defects.the NDT can be used to various stages of manufacturing process. so let's discuss some most common method and it's advantages and disadvantages
Hello guys,
I am here to share my knowledge on Non-Destructive Testing (NDT). In this presentation, I tried to explain on the following topics:
1. why we use NDT (purpose)?
2. Condition Assessment of the Structures by Non-destructive Evaluation Techniques
3. Concrete Petrography Implications
4. Potential as a DiagnosticTechnique
5. Common Applications of Microscopy in Concrete Science and Technology
6. Thermographic (Infrared Thermal Imaging)
With interesting pictures
and much more...
I put some effort to present in front of you. So, kindly if you find any mistakes feel free to text.
Nondestructive testing or Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component or system without causing damage.
Because NDT does not permanently alter the article being inspected, it is a highly valuable technique that can save both money and time in product evaluation, troubleshooting, and research.
Although there can be no direct measurement of the strength properties of structural concrete for the simple reason that strength determination involves destructive stresses, these depend on the fact that certain physical properties of concrete can be related to strength and can be measured by non-destructive methods.
Such properties include hardness, resistance to penetration by projectiles, rebound capacity and ability to transmit ultrasonic pulses and X- and Y-rays.
The NDT methods are cost effective.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity
Scope of NDT testing in industries.Details about power plant inspection,rope inspection,storage tank inspection,future scope of NDT,Aircraft inspection,history of NDT,Industrial Area,conclusion
this paper presentation on " Non-destructive testing " which meant that as the name indicated that testing the material without destroying them is called as Non-destructive testing. so the purpose of NDT is used to evaluate any types of defects.the NDT can be used to various stages of manufacturing process. so let's discuss some most common method and it's advantages and disadvantages
Hello guys,
I am here to share my knowledge on Non-Destructive Testing (NDT). In this presentation, I tried to explain on the following topics:
1. why we use NDT (purpose)?
2. Condition Assessment of the Structures by Non-destructive Evaluation Techniques
3. Concrete Petrography Implications
4. Potential as a DiagnosticTechnique
5. Common Applications of Microscopy in Concrete Science and Technology
6. Thermographic (Infrared Thermal Imaging)
With interesting pictures
and much more...
I put some effort to present in front of you. So, kindly if you find any mistakes feel free to text.
Nondestructive testing or Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component or system without causing damage.
Because NDT does not permanently alter the article being inspected, it is a highly valuable technique that can save both money and time in product evaluation, troubleshooting, and research.
Although there can be no direct measurement of the strength properties of structural concrete for the simple reason that strength determination involves destructive stresses, these depend on the fact that certain physical properties of concrete can be related to strength and can be measured by non-destructive methods.
Such properties include hardness, resistance to penetration by projectiles, rebound capacity and ability to transmit ultrasonic pulses and X- and Y-rays.
The NDT methods are cost effective.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity
Introduction to the non destructive testing explains the methods for evaluating and verifying many types of Materials as plastics, structures, metals, chemicals, leakage, physical properties. It's very used in the concrete engineering world and in the scientific world.
Advance NDT method are much efficient than conventional NDT methods. these methods have great amount of automation which help in understanding and comparing the data occupied by different reading. These data can be used for the future references and can be saved and stored. these Advance NDT method can test or inspect any shape such as complex shape very easily and effeciently.
This presentation describes 6 methods to check concrete sample by performing non destructive testing.
1. Rebound hammer
2. Dye penetration test
3. Pull out test for concrete
4.Half cell potentiometer test
5.Rebar scanner
6 ultrasonic pulse velocity test
Introduction to Phased Array Using the OmniScan MX2 - Part FourOlympus IMS
Free webinar available: http://bit.ly/1ndAuAc
OmniScan MX2 product details: http://bit.ly/1e6mjY8
Part four of the series will cover inspection and analysis with an emphasis on flaw sizing and characterizations using the sector scan data view. The user will learn and see examples of how the tools in the OmniScan MX2 are used to measure and record data for a manual inspection. This will include pros and cons of sector scan and linear scan groups, focus and coverage strategies, and application examples while learning to navigate the OmniScan MX2 software. There will be a brief review of the previous Webinar that leads into the current topics. All basic concepts of parts 1-3 in preparing the OmniScan MX2 for a single group manual weld inspection will be covered.
Contact us: http://bit.ly/1rDmq94
Sign up for our newsletter: http://bit.ly/1j5FOTy
Introduction to Phased Array Using the OmniScan MX2 - Part ThreeOlympus IMS
Free webinar available: http://bit.ly/Mv7mc4
OmniScan MX2 product details: http://bit.ly/1e6mjY8
Part three of the series will cover gate and C-scan configurations for weld inspection, calibration options and limitations, and include explanation and demonstration of the OmniScan MX2 calibration wizards for manual inspection.
There will be a brief review of the previous Webinar that leads into the current topics. This will combine sector scan basics, and MX2 displays readings, and parameters in preparation for a manual sector scan weld inspection
Contact us: http://bit.ly/1rDmq94
Sign up for our Newsletter: http://bit.ly/1j5FOTy
Introduction to the non destructive testing explains the methods for evaluating and verifying many types of Materials as plastics, structures, metals, chemicals, leakage, physical properties. It's very used in the concrete engineering world and in the scientific world.
Advance NDT method are much efficient than conventional NDT methods. these methods have great amount of automation which help in understanding and comparing the data occupied by different reading. These data can be used for the future references and can be saved and stored. these Advance NDT method can test or inspect any shape such as complex shape very easily and effeciently.
This presentation describes 6 methods to check concrete sample by performing non destructive testing.
1. Rebound hammer
2. Dye penetration test
3. Pull out test for concrete
4.Half cell potentiometer test
5.Rebar scanner
6 ultrasonic pulse velocity test
Introduction to Phased Array Using the OmniScan MX2 - Part FourOlympus IMS
Free webinar available: http://bit.ly/1ndAuAc
OmniScan MX2 product details: http://bit.ly/1e6mjY8
Part four of the series will cover inspection and analysis with an emphasis on flaw sizing and characterizations using the sector scan data view. The user will learn and see examples of how the tools in the OmniScan MX2 are used to measure and record data for a manual inspection. This will include pros and cons of sector scan and linear scan groups, focus and coverage strategies, and application examples while learning to navigate the OmniScan MX2 software. There will be a brief review of the previous Webinar that leads into the current topics. All basic concepts of parts 1-3 in preparing the OmniScan MX2 for a single group manual weld inspection will be covered.
Contact us: http://bit.ly/1rDmq94
Sign up for our newsletter: http://bit.ly/1j5FOTy
Introduction to Phased Array Using the OmniScan MX2 - Part ThreeOlympus IMS
Free webinar available: http://bit.ly/Mv7mc4
OmniScan MX2 product details: http://bit.ly/1e6mjY8
Part three of the series will cover gate and C-scan configurations for weld inspection, calibration options and limitations, and include explanation and demonstration of the OmniScan MX2 calibration wizards for manual inspection.
There will be a brief review of the previous Webinar that leads into the current topics. This will combine sector scan basics, and MX2 displays readings, and parameters in preparation for a manual sector scan weld inspection
Contact us: http://bit.ly/1rDmq94
Sign up for our Newsletter: http://bit.ly/1j5FOTy
See the video presentation: http://bit.ly/1vtsaCb
Question: For precision sizing of weld flaws using OmniScan phased array inspection, which is the preferred technique: Shear wave tip diffraction or amplitude drop sizing?
Answer: The decision to use shear wave tip diffraction or amplitude drop sizing is dependent on the flaw type, size, and orientation. In general, if the flaw is larger than the beam size and is near perpendicular to the beam as is typical in side wall lack of fusion, amplitude drop sizing will produce most accurate results. If the flaw is smaller than the beam size such as a crack ligament then tip diffraction will be most accurate.
Sign up for our Newsletter: http://bit.ly/1sQqOyj
Introduction to Phased Array Using the OmniScan MX2 - Part TwoOlympus IMS
Free webinar available: http://bit.ly/LTH8jA
OmniScan MX2 product details: http://bit.ly/1e6mjY8
Part two of the series will cover sector scan basics and introduction to the data views and displays commonly used in automated UT and phased array. This includes use of the OmniScan MX2 group setup wizards, and setup and configuration of the UT parameters.
Sign up for our Newsletter: http://bit.ly/1j5FOTy
Advancements in Phased Array Scan PlanningOlympus IMS
For more on Olympus Phased Array: http://bit.ly/1zo4CRu
A presentation from the webinar Advancements in Phased Array Scan Planning.
Scan planning is an integral, yet somewhat neglected step in the everyday Phased Array (PA) inspection process. Success in proper scan planning leads to reliable results, higher productivity, and ensures repeatability but can often be difficult due to the varying nature of the PA technique and its application.
In this presentation, learn advanced scan planning concepts, implementation of different PA inspections, and achieve a better overall understanding of the benefits and limitations of Phased Array.
Watch the webinar associated with this presentation: http://bit.ly/1EyHFg9
Contact us: http://bit.ly/1rDmq94
Sign up for our newsletter: http://bit.ly/1j5FOTy
Introduction to Phased Array Using the OmniScan MX2 - Part OneOlympus IMS
Free webinar available: http://bit.ly/1b5imIS
OmniScan MX2 product details: http://bit.ly/1e6mjY8
This series of webinars is designed to take participants through the basics of preparing a single group Phased Array inspection using the OmniScan MX2. Part one of the series will cover the essential ingredients of phased array and basic theory. It is geared toward understanding the equipment basics used to generate phased array inspections and includes the introduction to the OmniScan MX2 software user interface. Instrument module configurations, probe and wedge information, and basic beam forming concepts for a single sector scan group typical of manual inspection are explained while learning how those parameters are entered and controlled in the OmniScan MX2 software.
Contact us: http://bit.ly/1rDmq94
Sign up for our newsletter: http://bit.ly/1j5FOTy
Advances in Phased Array Weld Inspection Scan Plan DesignsOlympus IMS
The compound S-scan improves on traditional phased array weld inspection scan plan strategies by combining the S-scan and E-scan inspections as defined in ASME V, Article I into a single acquisition group providing more inspection coverage of the weld volume and heat affected zone. The compound S-scan improves the range and performance of existing phased array 1D pulse-echo probes, wedges, and instrumentation via new functionality in focal law calculators that are commercially available today from Olympus and other manufacturers.
Additional benefits of the compound S-scan inspection include ability to use pre-defined configurations over a larger range of weld bevels and thicknesses, enforcement of fewer essential variables in the inspection work procedure, and a more efficient work flow for phased array inspection setup, calibration, acquisition, and data analysis IAW ASME V, Article 4, Phased Array Mandatory Appendixes IV and V.
This paper presents an overview of the compound S-scan and demonstration of its benefits including examples of weld inspection data analysis and flaw sizing.
Discover the potential of Ultrasonic Testing for material inspection with our expert NDT consultancy insights. Uncover how this advanced, non-destructive method revolutionizes safety and reliability! 🔍🛠️
STRC provide accurate and consistent results and one stop access to our wide range of building material testing, calibration and non destructive testing services, which makes all the difference.
A Review on Recent Trends in Non Destructive Testing Applicationsvivatechijri
The field of NDT is a very large and interdisciplinary field that plays a critical role in inspection of
crucial component. These test may fail due to either the fault in the equipment used, the miss application of the
methods or the However, these techniques generally require considerable operator skill and interpreting test
results. This paper presents the reviews of different works in the area of NDT and tries to find out recent and
trends available in industries and other fields in order to minimize the total equipment cost, minimize damages
and maximize the safety of machines, structures and materials
Construction Diagnostic Centre (CDC) is a consultancy & a construction material testing laboratory
offering Non Destructive/ Material Testing (NDT), Quality Control, & Repair / Rehabilitation Consultancy services.
CDC has been a pioneer in the field of NDT as well as Repair & Rehabilitation Consultancy in Pune and Western Maharashtra, since 1993.
An offshoot of a parent company viz ‘Ranade Consultants’, a firm established in 1960, CDC draws on its vast and rich experience in Structural
/ RCC / Project Management & Architectural consultancy.
Construction Diagnostic Centre Pvt. Ltd. ( CDC) is a consultancy & a construction material testing laboratory offering Non Destructive / Material Testing ( NDT ), Quality Control, & Repair / Rehabilitation Consultancy services.
An offshoot of a parent company viz ‘Ranade Consultants’, a firm established in 1960, CDC draws on its vast and rich experience in Structural / RCC / Project Management & Architectural consultancy. CDC is the ONLY firm offering all civil engineering-related Consultancy & Testing services under one roof. It boasts of cutting edge technology and sound infra-structure.
Welding is a common joining process used extensively
in automobile industries, aircraft machine frames structural
work ship building and various other fields. The physical
properties of these welds are influenced by several factors. In
order to produce satisfactory weldments which fulfill the
requirement of quality the integrity of quality control is
important. To understand the various defects, their causes and
remedies can help to ensure higher quality and longer lasting
welds. This report contains essential information of surface
irregularities and weld discontinuities. Non destructive testing
(NDT) is a mechanism which helps in finding out of defects of any
item like welds before major harms happen to the item without
affecting its usefulness. This thesis discusses the non destructive
testing of weld structures. There are more than fourteen methods
of NDT in metals, in this thesis the most important ones-Visual,
Ultrasonic, X-ray and penetrant testing are discussed in detail.
The experimental results are discussed and comparisons are
made based on cost, accuracy, safety, time consumption, etc.
Based on these comparisons conclusions and recommendations
are made.
Discover the best ultrasonic testing services in Delhi, Gurgaon, and Noida with A To Z NDT Solutions. Our cutting-edge technology allows for accurate flaw detection in various materials, ensuring the highest quality standards are met. Trust us to provide reliable and efficient ultrasonic testing solutions for your needs.
Hardness is a material's resistance to penetration.
In general, an indenter is pressed into the surface of the material to be tested under a specific load for a definite time interval, and a measurement is made of the size or depth of the indentation
Hardness is a material's resistance to penetration.
In general, an indenter is pressed into the surface of the material to be tested under a specific load for a definite time interval, and a measurement is made of the size or depth of the indentation
Dye penetration is a non-destructive method which is used to detect surface breaking discontinuities in metals, plastics and ceramics.
The test is performed by cleaning the test surface thoroughly and then applying the penetrate followed by the application of developer.
Visual Inspection is one of the most widely used Non-Destructive Testing methods for the detection of discontinuities before they cause major problems, e.g. poor welding, surface defects, corrosion pits, general condition, degradation, blockages and foreign materials
Nondestructive testing or Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component surface & subsurface without causing damage or effect to their future performance or properties. Non-destructive testing is used to detect abnormalities in physical, chemical or electrical characteristics.
Nondestructive testing or Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component surface & subsurface without causing damage or effect to their future performance or properties. Non-destructive testing is used to detect abnormalities in physical, chemical or electrical characteristics.
Introduction & uses of non destructive testingndtindia123
Nondestructive testing or Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component surface & subsurface without causing damage or effect to their future performance or properties. Non-destructive testing is used to detect abnormalities in physical, chemical or electrical characteristics.
Nondestructive testing or Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component surface & subsurface without causing damage or effect to their future performance or properties. Non-destructive testing is used to detect abnormalities in physical, chemical or electrical characteristics.
Nondestructive techniques are the means by which materials and structures may be inspected without disruption or impairment of serviceability. The science of nondestructive testing incorporates all the technology for detection and measurement of significant properties, including discontinuities, in items ranging from research specimen to finished hardware and products.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...
Ultrasonic investigation
1.
2. Ultrasonic testing is completely nondestructive
and safe, and it is a well established test
method in many basic manufacturing,
process, and service industries, especially in
applications involving welds and structural
metals.
3. Ultrasonic Flaw Detection Test :
Ultrasonic testing is completely nondestructive
and safe, and it is a well established test
method in many basic manufacturing,
process, and service industries, especially in
applications involving welds and structural
metals.
4. Ultrasonic Pulse Velocity Test :
Ultrasonic concrete testing is based on the
pulse velocity method to provide information
on the uniformity of concrete, cavities, cracks
and defects. The pulse velocity in a material
depends on its density and its elastic
properties which in turn are related to the
quality and the compressive strength of the
concrete.
5.
The pulse velocity in concrete may be
influenced by
a) Path length
b) Lateral dimension of the specimen tested
c) Presence of reinforcement steel
d) Moisture content of the concrete