A buttweld fitting is a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment.

1. Types of Buttweld
Fittings
Presented By
www.kkfittings.com

2. A buttweld fitting is a weldable pipe fitting that allows for change of
direction of flow, to branch off, reduce pipe size or attach auxiliary
equipment. Forged Steel buttweld fittings are manufactured in
accordance with ANSI / ASME B16.9. Buttweld fittings use seamless
or welded pipe as the starting material and are formed to get the shape
of elbows, tees and reducers etc. Buttweld Pipe Fittings which are
broadly used in instrumentation, piping and process control and many
other industrial applications, etc.
About Buttweld Fittings
www.kkfittings.com

3. 45 Degree Elbow is found in long radius and short radius version. The center to
face distance for a long radius is nominal pipe size, while the center to face
distance for 45 Degree Short Radius Elbow even is to nominal pipe size.
45 Degree Elbow
www.kkfittings.com

4. 90 Degree Elbow is found in long radius and short radius version. The centre to
face distance for a long radius is nominal pipe size, while the centre to face
distance for 90 Degree Short Radius Elbow even is to nominal pipe size.
90 Degree Elbow
www.kkfittings.com

5. Tee is used in construction, electricity, shipbuilding and chemical Industry. The
Buttweld Tee Fitting helps to connect auxiliary equipment to a pipe as it is
welded on both sides of the pipe, leaving the branch open for branch off.
Tee
www.kkfittings.com

6. Reducing Tee is required as the branch has the same diameter as the pipe
whereas, reducing tee is used as the branch has a smaller diameter as the run-
pipe. The Buttweld Reducing Tee Fitting is used in ultra- high purity systems,
waste and water supply, they provide smooth flow paths.
Reducing Tee
www.kkfittings.com

7. Equal tee is required as the branch has the same diameter as the pipe whereas,
reducing tee is used as the branch has a smaller diameter as the run-pipe. The
Buttweld Equal Tee Fitting is used in petrochemical, oil, natural gas, liquefied
gas, power plant, nuclear power, pharmacy, and food sanitation.
Equal Tee
www.kkfittings.com

8. Buttweld Equal Cross has the outlet of the same diameter, one inlet, and three
outlets. They are used to join pipes and are welded to the pipes. It is required
to distribute the flow of a fluid in three different directions.
Equal Cross
www.kkfittings.com

9. Reducing Cross Fittings is used for multiple connections of pipes. It has four
ends of the cross in reducing diameter. It is suitable for interlinked plumbing
systems and it can handle any high or low pressure flow of liquid through it.
Reducing Cross
www.kkfittings.com

10. There are two main types of Reducers concentric and eccentric reducers.
An Eccentric Reducer is used in piping systems between pipes of different sizes.
It has an edge that is parallel to the connecting pipe.
Reducer
www.kkfittings.com

11. Pipe Cap Fittings is used for protecting the end of pipe and other fittings. It
also provides an increased diameter range and wide tolerance delivers a
reduction in stock holding costs. They are made with a new design based on
proven technology to deliver total peace of mind.
End Cap
www.kkfittings.com

12. Pipe Nipple are suitable for connecting two pipes with no risk leakage to ensure
obstruction free flow of liquids and gases in oil, gas and petrochemical
industries.
Pipe Nipple
www.kkfittings.com

13. These are widely used for various industrial applications. These Pipe-Plugs
arrests the flow of liquid in particular chambers effectively which also are very
much efficient in the performance of fluid pumping machines.
Plug
www.kkfittings.com

14. These Pipe Unions are a very useful tool in pipelining and are used for
connecting two pipes of different materials. These are highly reckoned among
our clients due to their various attributed such as quality, reliability,
consistency, and durability etc.
Union
www.kkfittings.com

15. Thank You!
Follow us :
Facebook | Twitter
+91 22 66394167
sales@kkfittings.com
www.kkfittings.com