The document discusses different types of copper alloy flanges manufactured by Sunflex Metal Industries. It describes copper flanges, Cu-Ni 90/10 flanges, Cu-Ni 70/30 flanges, and other common flange types including slip-on, weld neck, blind, socket weld, threaded, lap joint, orifice, forged, reducing, and spectacle blind flanges. For each type, it provides details on materials, applications, designs, and usage. It concludes by providing contact information for Sunflex Metal Industries.
Boost the utilization of your HCL environment by reevaluating use cases and f...
Types of cupro nickel flanges
1. * Types of
Cupro Nickel Flanges
www.sunflexmetal.net
Presented By
2. * Copper Flanges
In order to manufacture these flanges,
our vendors and ingenious professionals
use pristine quality copper and modern
techniques. These Copper Nickel
Flanges are made up of high-grade raw
materials using our state of the art
machinery and techniques.
www.sunflexmetal.net
3. * Cu-Ni 90/10 Flanges
Cu-Ni 90/10 Flanges are specifically
used for marine, offshore, shipbuilding,
chemical, petrochemical, and
architectural applications, due to its
remarkable properties like ductility, and
in addition strength. Our 90/10 Copper
Alloy Square Flanges can also bear high
quality and sturdiness at lifted
temperatures too.
www.sunflexmetal.net
4. * Cu-Ni 70/30 Flanges
We are offering Copper Alloy 70/30
Flanges which provides a dependable
and long-lasting isolation point
without. These flanges are made in
order to free product flow without any
restriction through a pipe which is even
used in welding back rings, flexible
metal hose, condensers, propeller
sleeves and more.
www.sunflexmetal.net
6. * Slip On Flanges
In a Slip on Raised Face Flange, the
diameter of the inside pipe is larger
than the diameter of the outside pipe.
The name of the pipe itself illustrates
that it is fashioned in a manner to slip
over the pipe. To avert leakage
concerns, the SORF Flange is
comprehensively welded both inside and
outside.
www.sunflexmetal.net
7. * Weld Neck Flanges
The design of Welding Neck Flanges is
made ensuring that the inside diameter
of the pipe matches the inside diameter
of the flange. Based on weld neck
flange dimensions, they are classified
into two types of regular type flanges
and long type flanges. The former one is
used with pipes, and the latter one is
employed in the process plant.
www.sunflexmetal.net
8. * Blind Flanges
If work is to be performed inside the
line, one can use BLRF Flanges also
referred as Raised Face Blind Flanges.
They are also used for examining the
flow of gases and liquids inside a vessel.
These flanges are frequently deployed in
high-pressure applications and complex
piping system. They avert the
continuous flow of any gases and liquids.
www.sunflexmetal.net
9. * Socket Weld Flanges
Design of the Socket Weld Pipe
Flanges is identical to the layout of
the slip-on flanges. In order to acquire
the pipe, the bore is counter-bored. We
carry a complete range of Socket Weld
Raised Face (SWRF) Flanges at our
center which has their wide applications
in high-pressure operations like steam
and hydraulic lines.
www.sunflexmetal.net
10. * Threaded Flanges
Threaded Pipe Flanges are
implemented in higher pressure
applications. The layout of these flanges
is similar to the design of a slip on
Flanges. The specialty of these flanges
is, they can be congregated without
welding. This is because they are
designed with a smaller diameter
compared to other flanges.
www.sunflexmetal.net
11. * Lap Joint Flanges
The difference between a typical Lap
Joint Flanges and other types of flanges
are the absence of a raised face. It
consists of two components, a stub end,
and a loose backing flange. The former
one is the butt welded to the pipe, and
the latter one is left free to move over
the pipe & is designed to be used where
continuous dismantling is necessary.
www.sunflexmetal.net
12. * Orifice Flanges
For calibrating the flow rate of gases
and liquids in a specific pipeline, Orifice
Pipe Flanges are used along with Orifice
meters. The combination of two Orifice
Pipe Flanges is called an orifice flange
union. A typical Raised Face Orifice
Flange consists of pairs of pressure
tapings, which are placed opposite to
one another.
www.sunflexmetal.net
13. * Forged Flanges
Forged Socket Weld Flanges are
circular plate type devices which are
generally used for the conjunction of
machinery parts. Forged Flanges have
countless industrial applications which
include connecting joints, sheets,
pumps, valves, and systems. These
flanges are also deployed in heat
coupling.
www.sunflexmetal.net
14. * Reducing Flanges
Reducing Flanges are also used to
reduce the bore size of a pipeline.
These flanges are fixed between two
pipes by clamping, gluing, or
welding. Reducing Flanges have many
varieties like WNRF, SORF, and Threaded
Reducing Flanges. We have a cluster of
all of these kinds with different types
and pressures.
www.sunflexmetal.net
15. * Spectacle Blind Flanges
Spectacle Blind Pipe Flanges are always
to be kept in open position in order to
allow free flow from the pipe.
Our Raised Face Spectacle Blind
Flanges are utilized to separate a piece
of machinery or equipment in order to
examine it. Also, the thickness of these
flanges is decided depending on their
size of the pipe and line pressure.
www.sunflexmetal.net
16. *Get in Touch
Sunflex Metal Industries is one of the leading Copper
Flanges manufactures in India and supplies quality
Flanges of all types worldwide. For further information
about the kinds of copper flanges they offer, visit our
website.
www.sunflexmetal.net
Email: sales@sunflexmetal.net