This document provides an introduction to transportation engineering and discusses various topics related to transportation including:
- The role of transportation in economic development and rural development.
- Different modes of transportation including road, rail, water, air, and others.
- Advantages and disadvantages of road transportation.
- Characteristics of road transport such as flexibility and low investment requirements.
- Concepts related to traffic such as volume, passenger car units (PCU), and flow characteristics.
Highway Engineering for BE Civil Engineering Students
History of Roads in India, IRC, CRRI, Classification of Roads, Three 20 year Road Development Plans, Road patterns, Accident Studies,
Highway Engineering for BE Civil Engineering Students
History of Roads in India, IRC, CRRI, Classification of Roads, Three 20 year Road Development Plans, Road patterns, Accident Studies,
DAVV IET_ TraNSPORTATION [PPT LECTURES ALL 501.pptxprtaap1
(Established by the Government of India under NITSER Act,)
P.O. ICHCHHANATH, SURAT-395 007, GUJARAT, INDIA
Website: http://www.svnit.ac.in
Advt No. Estt. /2022/Gr_A1/2002 Date: October 17, 2022
RECRUITMENT FOR NON-TEACHING POSITIONS
Sardar Vallabhbhai National Institute of Technology Surat (SVNIT) was established by the
Government of India by an Act of Parliament, offering UG, PG and Ph.D. Programs in Engineering/
Technology and Sciences. The Institute is in search of bright, dynamic, experienced, qualified, and
suitable Indian Nationals to cater the Institute’s requirement. The Institute invites online
applications for the following Non-teaching positions on direct recruitment in various departments/
sections of the Institute:
Sl.
No
Name of the Post (s)
& Specialization/
Relevant Field
Pay Level
(as per 7 CPC)
No of Vacant Posts* Total* Upper
Age
Limit
UR SC ST OBCNCL
EWS
1 Librarian Pay Level 14
[PB-4 & GP Rs
10000]
1 - - - - 1 56
2 Scientific Officer /
Technical Officer
(MIS)
Pay Level 10
[PB-3 & GP Rs
5400]
1 - - - - 1 35
3 Executive Engineer
(Civil-01, Electrical-
01)
Pay Level 10
[PB-3 & GP Rs
5400]
2 - - - - 2 35
Total 4 0 0 0 0 4
*One post will be filled up from the identified person with benchmark disabilities, if found suitable
The eligibility criteria for the above posts is as per Recruitment Rules of NITs (2019) and as
updated from time to time by Ministry of Education, Govt. of India. For details regarding the
online Application Form, Educational Qualifications, Experience, other requirements and terms &
conditions for these positions, please visit the Institute website http://www.svnit.ac.in. The
number of Posts may vary at the time of final selection / recruitment.
The recruitment notice for the post advertised vide advertisement no. Estt./2021/Gr_A/3051
dated 02.03.2021 & Estt./2021/2021/EE/678 dated 07.06.2021 for which the recruitment process
has not been completed is cancelled vide Notice No.E/Rect.(2021)/1165 dated 14.10.2022. The
interested applicant who has applied earlier may apply afresh.
The interested candidates may apply online through the Institute website http://www.svnit.ac.in
and send the filled in downloaded online application form duly singed alongwith self-attested
documents viz. relevant testimonials, certificates, payment receipts etc. by speed/ registered
posts to the Deputy Registrar (Establishment), Sardar Vallabhbhi National Institute of
Technology, Ichchhanath, Dumas Road, Surat – 395 007, Gujarat, The applications received
through any other mode shall not be accepted and summarily rejected. The last date for
submission of online application is December 02, 2022 till 5.00 p.m. and receipt of
downloaded signed completed application at SVNIT Surat is December 12, 2022.
-sd/-
REGISTRAR
1
(Established by the Government of India under NITSER Act,)
P.O. ICHCHHANATH, SURAT-395 007, GUJARAT, INDIA
Website: http://www.svnit.ac.in
Advt No. Estt. /2022/Gr_A1/2002 Date: October 17, 2022
RECRUITMENT FOR NON-TEACHING P
DAVV IET_ TraNSPORTATION [PPT LECTURES ALL 501.pptxprtaap1
(Established by the Government of India under NITSER Act,)
P.O. ICHCHHANATH, SURAT-395 007, GUJARAT, INDIA
Website: http://www.svnit.ac.in
Advt No. Estt. /2022/Gr_A1/2002 Date: October 17, 2022
RECRUITMENT FOR NON-TEACHING POSITIONS
Sardar Vallabhbhai National Institute of Technology Surat (SVNIT) was established by the
Government of India by an Act of Parliament, offering UG, PG and Ph.D. Programs in Engineering/
Technology and Sciences. The Institute is in search of bright, dynamic, experienced, qualified, and
suitable Indian Nationals to cater the Institute’s requirement. The Institute invites online
applications for the following Non-teaching positions on direct recruitment in various departments/
sections of the Institute:
Sl.
No
Name of the Post (s)
& Specialization/
Relevant Field
Pay Level
(as per 7 CPC)
No of Vacant Posts* Total* Upper
Age
Limit
UR SC ST OBCNCL
EWS
1 Librarian Pay Level 14
[PB-4 & GP Rs
10000]
1 - - - - 1 56
2 Scientific Officer /
Technical Officer
(MIS)
Pay Level 10
[PB-3 & GP Rs
5400]
1 - - - - 1 35
3 Executive Engineer
(Civil-01, Electrical-
01)
Pay Level 10
[PB-3 & GP Rs
5400]
2 - - - - 2 35
Total 4 0 0 0 0 4
*One post will be filled up from the identified person with benchmark disabilities, if found suitable
The eligibility criteria for the above posts is as per Recruitment Rules of NITs (2019) and as
updated from time to time by Ministry of Education, Govt. of India. For details regarding the
online Application Form, Educational Qualifications, Experience, other requirements and terms &
conditions for these positions, please visit the Institute website http://www.svnit.ac.in. The
number of Posts may vary at the time of final selection / recruitment.
The recruitment notice for the post advertised vide advertisement no. Estt./2021/Gr_A/3051
dated 02.03.2021 & Estt./2021/2021/EE/678 dated 07.06.2021 for which the recruitment process
has not been completed is cancelled vide Notice No.E/Rect.(2021)/1165 dated 14.10.2022. The
interested applicant who has applied earlier may apply afresh.
The interested candidates may apply online through the Institute website http://www.svnit.ac.in
and send the filled in downloaded online application form duly singed alongwith self-attested
documents viz. relevant testimonials, certificates, payment receipts etc. by speed/ registered
posts to the Deputy Registrar (Establishment), Sardar Vallabhbhi National Institute of
Technology, Ichchhanath, Dumas Road, Surat – 395 007, Gujarat, The applications received
through any other mode shall not be accepted and summarily rejected. The last date for
submission of online application is December 02, 2022 till 5.00 p.m. and receipt of
downloaded signed completed application at SVNIT Surat is December 12, 2022.
-sd/-
REGISTRAR
1
(Established by the Government of India under NITSER Act,)
P.O. ICHCHHANATH, SURAT-395 007, GUJARAT, INDIA
Website: http://www.svnit.ac.in
Advt No. Estt. /2022/Gr_A1/2002 Date: October 17, 2022
RECRUITMENT FOR NON-TEACHING P
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
2. Assignment
1. Discuss about the role of transportation.
2. Discuss role of transportation in rural development.
3. Write down the different modes of transportation.
4. Write down the advantages and disadvantages of road
transportation.
5. Discuss about the characteristics of road transport.
4. Introduction
Role of Transportation:
Transportation contributes to the economic, industrial, social and cultural
development of any country.
Transportation is vital for the economic development of any region, since
every commodity produced whether it is food, clothing, industrial
products or medicine needs transportation at all stages from production to
distribution.
In the production stage, transportation is required for carrying raw
materials like seeds, manure, coal, steel, etc.
5. In the distribution stage, transportation is required from the production
centers, farms and factories to the marketing centers and later to the
retailers and the consumers for distribution.
The inadequate transportation facilities retard the process of socio-
economic development of the country.
The adequacy of transportation system of a country indicates its economic
and social development.
6. Role of Transportation in rural development:
Over 75% of the population of the country living in the villages.
The development in urban countries alone don’t indicate the overall
development of the country.
Only with the improvement in transportation facilities in rural areas, there
could be faster development of the rural centers.
The fertilizer and other inputs for agriculture and cottage industries could
reach the rural population easily.
Products can be sold at the nearest marketing centers for more
remunerative price.
7. Faster economic growth and decreased wastage.
With improved facilities for education, health care and other social needs
in the villages, the urge for the migration to urban centers decreases.
Balance development of the country as a whole.
8. Modes of transportation:
Land transportation
Roadways or Highways
Railways
Water transportation
Air transportation
Other modes of transportation
Pipe lines
Elevators
Cable cars
Monorails
Belt conveyors
9. Advantages & disadvantages of road transport:
Less investment.
Door to door service.
Service in rural areas.
Flexible service.
Suitable for short distance.
Lesser risk of damage in
transit.
Saving packing cost.
Seasonal nature.
Accident & breakdown.
Unsuitable for long distance
and bulking traffic.
Slow speed.
Lack of organization.
Advantages Disadvantages
10. Characteristics of road transport:
⁕ Roads are used by various types of road vehicles, but railway tracks are
used only by rail locomotives and wagons, waterways are used by only
ships and boats.
⁕ Road transports requires a relatively small investment for the government.
⁕ Motor vehicles are much cheaper than other carriers.
⁕ Road transport offer a complete freedom to road users to transfer vehicle
from one lane to another and from one road to another according to the
need and convenience.
⁕ In particular, for short distance travel, road transport saves time.
⁕ Road transport is the only means of transport that offers itself to the whole
community alike.
12. Highway Development & Planning
Historical development of road construction:
History of highway engineering gives us an idea abut roads of
ancient times.
Roads in Rome were constructed in a large scale and it radiated
in many directions helping them in military operations.
Thus they are considered to be pioneer in road construction.
13. Ancient roads:
Most primitive mode of transport was by foot.
These human pathways would have been developed for
specific purposes leading to camp sites, food, streams for
drinking water etc.
Invention of wheel in Mesopotamian civilization lead to
development of animal drawn vehicles.
To provide adequate strength to carry wheels, new ways tended
to folly sunny drier side of path.
14. After invention of wheel animal drawn vehicle were developed
and need for hard surface road emerged.
Traces of such hard roads were developed from carious ancient
civilization dated as old as 3500 BC.
Earliest authentic record of road was found from Assyrian
empire constructed about 1900 BC.
15. Necessity of highway planning:
In present era planning is considered as pre-requisite before
attempting any development program.
Particularly true for any engineering work as planning is basic
requirement for any new project or an expansive program.
Highway planning is also a basic need for highway
development.
Planning is of great importance when funds available are
limited where as total requirement is much higher.
Planning helps best utilization of available funds.
16. Objects of highway planning:
To plan a road network for efficient and safe traffic operation but at
minimum cost.
To achieve at road system and length of different categories of roads
which could provide maximum utility and could be constructed with in
the available resources during plan period under consideration.
To fix up date wise priorities for development of each road link based on
utility as main criteria for phasing road development program.
To plan for future requirements and improvements of road in view of
anticipated development.
To workout financing system.
17. Classification of roads based on location and function:
Expressways:
Separate class of highways with superior facilities, design standards and
high speed ( 120 Km/hr)
Should permit only fast moving vehicle.
Parking, loading and unloading of goods and pedestrian crossing is not
allowed.
National Highways (NH):
=> Main highways running through a country connecting major ports, foreign
highways, capitals of large states and large industrial area.
18. State Highway(SH):
Arterial roads of a state, connecting up with the national highways of
adjacent states, district and headquarters with in the state.
Also serve as main arteries for traffic to and from adjacent roads.
Major District Roads (MDR):
Important roads with in a district serving areas of production and
connecting these with each other or with the main highways of a district.
Has lower speed and geometric design specifications than NH/SH.
Other District Roads (ODR):
Roads serving rural areas of production and providing them with outlet to
market and centers.
Village Roads (VR)
19. Problem-1: Calculate the additional length of metaled roads for the
following road system.
i. Total area = 9600 𝐾𝑚2
ii. Agricultural area = 3200 𝐾𝑚2
iii. Existing Railway track = 105 Km
iv. Existing length of metaled road = 322 Km
Population > 5000 2001-5000
Number of Villages and towns 8 40
Solution:
A = 3200 𝐾𝑚2
B= 9600-3200 = 6400 𝐾𝑚2
N = 40, T = 8, D = 15% of RL, R = 105 Km
20. Total length of metaled road = [
𝐴
8
+
𝐵
32
+ 1.6 N + 8T] + D –R
= [
3200
8
+
6400
32
+ 1.6 x 40 + 8 x 8] + D -105
= 728 + 15 % of 728 – 105
= 732.2 Km.
Additional metaled road needed = 732.2 – 322 = 410.2 Km.
22. Road Pattern
Rectangular or Block pattern
Whole area is divided into rectangular blocks of plots with streets
intersecting at right angles.
Main roads which passing through centre of area should be sufficiently
wide and other branch roads may be comparatively narrow.
May be further divided into small rectangular blocks for construction of
building placed back to back adding road on their front.
Construction and maintenance is easier.
But from traffic point of view this pattern is not very much convenient
because of number of intersections present here.
26. Transportation System
Traffic: Traffic means movement of persons (people) and vehicles (on
road)
Transport: Transport means movement of persons and goods from one
place to another place.
Transportation: Transportation means the entire activity involving traffic
and transport.
27. The land use and transport feedback cycle
Transport
system
Activities
Accessibility
Land use
28. Traffic Characteristics
Road user characteristics:
1. Physical characteristics.
2. Mental characteristics.
3. Psychological characteristics.
4. Environmental characteristics.
Vehicular characteristics:
1. Width 6. Speed
2. Length 7. Power
3. Height 8. Braking system
4. Weight 8. Lighting system
30. Traffic Volume Study
Traffic volume: Traffic volume is the number of vehicles that pass a given
line of road per unit time at any selected period. It is expressed in vehicles
per hour.
PCU: A passenger car is equal to 1 PCU then if 100 cars can play on a
road then it is 100 PCU. If a bus is introduced on the same road, then the
number of cars may reduce to 94, so 100-94 = 6 PCU. Thus 6 PCU is
equivalent to 1 bus. The number of cars a vehicle can substitute is known
as PCU of that vehicle.
33. Values of PCU
Type of Vehicle PCU Values
Car 1
Cycle/Motor Cycle 0.5
Auto Rickshaw 1
Tempo/CNG 1
Truck 4.5
Bus 3
Bullock Cart 6
34. Problem-2: Calculate the PCU/hr for a road using following data:
Solution:
PCU/hr = 8 x 0.5 + 6 x 4.5 + 19 x 1 + 26 x 1 + 3 x 6 + 9 x 1 = 103 PCU/hr
Vehicles Type Cycle Truck Car CNG BUS Bullock Cart Auto rickshaw
Number of Vehicle 8 6 19 26 17 3 9
Type of Vehicle PCU Values
Car 1
Cycle/Motor Cycle 0.5
Auto Rickshaw 1
Tempo/CNG 1
Truck 4.5
Bus 3
Bullock Cart 6
35. Problem-3: Calculate the PHF and also the PCU/hr for the PHF for a
stream on certain road using following data:
Time Cycle Truck Car CNG BUS
8:00 8 8 19 23 11
8:10 9 7 18 24 16
8:20 12 5 22 26 17
8:30 7 3 21 28 19
8:40 5 2 20 20 18
8:50 6 2 17 16 15
9:00 7 3 15 18 14
9:10 5 1 18 18 15
9:20 9 3 22 19 19
9:30 13 1 24 22 22
9:40 8 2 27 21 11
37. Total six maximum 10 min interval PCU summation = 127.5 + 126 + 123 +
123 + 116 + 115
= 730.5 PCU
Peak 10 min interval PCU = 127.5 PCU
PHF =
730.5
6 𝑋 127.5
= 0.95
PCU/hr = 730.5 / 0.95 = 769 PCU/hr
38. TMS (Time Mean Speed):
Time mean speed (TMS) is defined as the average speed of all vehicles passing
a point on a highway over a specified time period.
It is the simple average of spot speed.
Expression for 𝑣𝑡 =
1
𝑛
𝑣𝑖 is the spot speed of ith vehicle.
n is the number of observation.
𝑖=0
𝑛
𝑣𝑖
39. SMS (Space Mean Speed):
Space mean speed (SMS) is defined as the average speed of all vehicles
occupying a given section of a highway over a specified time period.
Consider unit length of a road and 𝑣𝑖 is the spot speed of ith vehicle.
Let 𝑡𝑖 is the time taken to complete unit distance, 𝑡𝑖 =
1
𝑣𝑖
If there are n such vehicles, then the average travel time 𝑡𝑠 is given by,
𝑡𝑠 =
∑𝑡𝑖
𝑛
=
1
𝑛
∑
1
𝑣𝑖
If average travel time is 𝑡𝑠 then average speed 𝑣𝑠 is 1
𝑡𝑠
.
𝑣𝑠 =
1
𝑡𝑠
=
𝑛
∑𝑖=0
𝑛 1
𝑣𝑖
40. Problem-4: If the spot speeds are 50, 40, 60, 54 and 45 m/s then
calculate the SMS (Space Mean Speed) & TMS (Time Mean Speed).
Solution: TMS (𝑣𝑡) is the average of spot speed. Therefore,
𝑣𝑡 =
∑𝑣𝑖
𝑛
=
50+40+60+54+45
5
= 49.8 m/s
SMS (𝑣𝑠) is the harmonic mean of spot speed. Therefore,
𝑣𝑠 =
𝑛
∑
1
𝑣𝑖
=
5
1
50
+
1
40
+
1
60
+
1
54
+
1
45
=
5
0.12
= 48.82 m/s
41. Problem-5: If SMS is 20.38 m/s and 𝜎2 is 138.727 for a stream in a
certain road of 88 vehicle. Then find out the TMS and density of the
stream.
Solution: TMS, 𝑣𝑡 = 𝑣𝑠 +
𝜎2
𝑣𝑠
= 20.38 +
138.727
20.38
= 27.184 m/s
Density, k =
𝑞
𝑣𝑠
=
88
20.38
= 4.3 vehicle/km
43. Parking Study
Out of 8760 hours in a year, the car runs on an average for only 400 hours,
remaining 8360 hours when it is parked. As the city grows, the use of land
increases considerably creating problem for space for parking purposes. The
demand of parking space is one of the major problems in big cities. Vehicles
if improperly parked cause lot of problems like-traffic congestions, accidents,
obstruction to fire-fighting operation, environmental pollution, etc.
44. Parking System
On street (curb) parking: Parked along the curb which is very convenient for
peoples but causes of traffic jams.
Common modes of on-street parking are (i) Parallel parking (ii) Angle
parking (iii) Right angle parking.
To ensure safety and convenience, it is desirable to prohibit parking at
following locations:
(i) Near intersections (ii) Near level crossing (iii) Pedestrian crossing (iv)
Narrow streets (v) Structures, etc.
45. Off-street parking: When parking places are provided away from the road
curb.
Methods of off-street parking are (i) Surface cur parks (ii) Multi-storey car
parks (iii) Roof parks (iv) Mechanical car parks (v) Underground car parks.
Peripheral parking schemes: Parking facilities are provided at the periphery
of the town. They are: (i) Park and walk (ii) Park and ride (iii) Good-bye
(kiss) and ride.
47. Road Accident
An accident which occurred or originated on a road open to public traffic
resulting in either injury or loss of life or damage to property, in which at
least one moving vehicle was involved.
48. Causes of road accidents:
Road factors:
1. Design speed
2. Control of access
3. Pavement width
4. Pavement surface
5. Shoulders
6. Horizontal curve
7. Vertical alignment
8. Median width
9. Sight distance
10. Intersections, etc.
Environment factors: Snow, ice, rain water, fog, smoke, heavy rainfall, etc.
Road Accident Causes
49. Vehicle factors:
1. Vehicle body and it’s features
2. Tyers
3. Braking System
4. Lighting system
5. Vehicle inspection and maintenance
6. Mixed traffic
7. Overloading, etc.
Road user factors:
1. Age of driver
2. Gender of driver
3. Violation of traffic laws
4. Competition with other vehicle or motor cycle.
5. Talking with pillion rider.
Others factors: Ribbon development, advertisement boards, trees,
attractive views, material on road, etc.
50. Motor vehicle moving ahead
Motor vehicle backing
Pedestrian
Parked vehicle
Fixed object
Rear end collision
Side swipe
Out of control
Fatal accident
Personal injury
Property damage only
Head on collision
Right-angle collision
Collision Diagram & Symbol
54. Pavement Marking
Centre lines: These broken line are meant to separate the opposite streams of
traffic on undivided two-way roads.
Route direction arrows: It is used to guide effectively the
traffic in the correct direction.
55. Pavement Marking
Stop lines: These are solid white lines provided transversely to the carriageway
and used to indicate the point behind which vehicles are required to stop.
Cross walk line: Pedestrian crossing (2m wide) are very important for their
safety.
56. Pavement Marking
Bus stops: Kerb length reserved for buses to stop are marked by continuous
yellow line on kerb indicating “ parking prohibited” or marked by the word
“BUS STOP”.
58. Unchanneled Intersection: There is no provision of any direction island or
central island.
Tee Box
Road Intersections
59. Intersection at grade or level: These include all roads which meat at more or less
the same level.
Tee Wye
60. Channelized Intersection: It is achieved by introducing island into the
intersection area, thus reducing the total conflict area available in the
unchannelezed intersection.
Advantages:
1. Vehicles can be confined to definite paths.
2. Points of conflicts can be separated.
3. Refuse island can be provided for pedestrians.
4. Angle of merging kept minimum.
61. Rotary Intersection: By provision of rotary, necessity of stopping at road
intersection is eliminated. Traffic from all converging roads keeps on moving
round the central island in clockwise direction and adopts its road of desire to
move out of rotary without stopping any where. On, rotary crossing conflicts are
completely eliminated.
62. Advantages Disadvantages
1. Traffic holding capacity is the
highest.
2. It is more safe.
3. All vehicle get equal preference.
4. Operational cost of vehicle is less.
5. No need of traffic police or signal
6. Number of accidents are low.
1. Requires large area of land and
hence it is costly in build up areas.
2. If large number of pedestrians and
cyclist are involved, design and
operation of rotary becomes
complicated.
3. If the vehicular traffic have to stop
to allow pedestrian to cross, the
main purpose of rotary is defeated.
63. Grade Separated Intersection: The intersecting roads are separated by
passing one road over or below the other and eliminating the crossing
manoeuvers.
64. Advantages Disadvantages
1. Maximum facility is given to the
crossing traffic.
2. There is increased safety for turning
traffic.
3. They provide comfort and
convenience to the driver and
saving the time & operational cost.
4. It can be designed for any angle of
intersection.
1. It involves very large areas.
2. It involves lot of expenditure in
providing bridges under passes and
interchange ramps.
3. Unnecessary rising grades and sags
are introduced in vertical alignment.
65. Over pass: When the major highway is taken above by raising its profile above
the general ground level by embankment and an over-bridge across another
highway.
Under pass: When the highway is taken by depressing it below the ground level
to cross another road by means of an under-bridge.
66. By-pass: It is an arrangement for diverting a traffic flow to avoid unnecessary
hazards.
Fly-over: It is a bridge over a large road intersection for safe traffic flow
avoiding conflict.
69. Some well-known traffic management measures are:
1. Restriction on right-turning.
2. One-way streets.
3. Tidal-flow operations.
4. Exclusive Bus-lanes.
5. Closing side-streets (Frontage road).
6. Traffic Aids:
a) Roadway Delineators: These are intended at turning point to provide
visual aids to drivers at night.
b) Hazard Markers: These are intended to define obstructions like guardrails
& abutment at road sides.
70. c) Object markers: These are used to indicate hazards and obstructions.
d) Speed breaker
e) Rumple strip
f) Guard rails
g) Safety barrier
h) Barrier and Channelizers
i) Traffic Attenuators, etc.
72. Highway Alignment & Surveys
Alignment:
Marking position or layout of central line on
ground and giving direction to highway is
called alignment.
1. Horizontal alignment
2. Vertical alignment
Once an alignment is fixed and constructed,
it is not easy to change it due to increase in
cost adjoining land and construction of costly
structures by the roadside.
73. Requirements of an ideal alignment
Short:
Alignment between two terminal stations should be short and as far as
possible be straight.
But due to some practical considerations deviations may be needed.
Easy:
Alignment should be easy to construct and maintain.
It should be easy for operation of vehicles.
Maximum extend easy gradient and curves should be provided.
74. Safe:
It should be safe both from construction and operating point of view
specially at slopes, embankments and cutting.
It should have safe geometric features.
Economical:
Alignment should be economical.
It can be considered so only when initial cost, maintenance cost and
operating cost is minimum,
75. Factors Controlling Alignment
Obligatory points:
These are control points governing highway alignment.
These points are classified into two categories.
Points through which it should pass:
1. Bridge site:
Bridge can be located only where river has straight and permanent path
and also where abutment and pier can be strongly funded.
Road approach to bridge should not be curved and skew crossing should
be avoided or possible.
Thus to locate a bridge highway alignment may be changed.
76. 2. Mountain:
While alignment passes through a mountain, various alternatives are to
either construct a tunnel or to go round hills.
Suitability of alternative depends on factors like topography, site
conditions and construction and operation cost.
3. Intermediate town:
Alignment may be slightly deviated to connect an intermediate town or
village nearby.
77. Points through which it should not pass:
1. Religious places:
These have been protected by law from being acquired for any purpose.
Therefore, these points should be avoided while aligning.
2. Very costly structure:
Acquiring such structures means heavy compensation which would result
in an increase in initial cost.
So, alignment may be deviated not to pass through that point.
3. Lakes/ ponds:
Presence of lake or pond on alignment path would be also necessitate
deviation of alignment.
78. Traffic:
Alignment should suit traffic requirement.
New alignment should be drawn keeping in view desire lines, traffic
pattern, etc.
Geometric design:
Geometric design factors such as gradient, radius of curve, sight distance,
etc. also governs alignment of highway.
To keep radius of minimum, it may be required to change alignment of
highway.
79. Economics:
Alignment finalized based on above factors should be economical.
Need to avoid high embankment and deep cutting to decrease initial cost.
Alignment is chosen in a manner to balance cutting and filling.
Other consideration:
Drainage considerations, hydrological factors, political considerations and
monotony govern alignment.
Subsurface water level, seepage flow and high flood level are factors to
be kept in view.
81. Elements of geometric design:
1. Cross-sectional elements – includes cross slope, various width of road
and features in road margins.
2. Sight distance consideration – includes cross slope, various width and
features in the road margins.
3. Horizontal alignment detail’s – includes features like super elevation,
transition curve, extra widening and set back distance, etc.
4. Vertical alignment distance and design of length of curve.
5. Intersection features – includes layout, capacity, etc.
83. Skid & Slip ( )
Skid:
Occurs when wheels slide without revolving or when wheels partially
revolves.
Skidding happens when path travelled along road surface is more than
circumferential movement of wheel due to their rotation.
When brakes are applied, wheels are locked partially or fully and if
vehicles moves forward, longitudinal skid takes places.
May vary from 0% to 100%
*****
84. Slip:
Takes place in a horizontal curve, if centrifugal force is greater than
counteracting force.
Considered dangerous as vehicle goes out of control leading to an
accident.
Vehicles travel less distance than the wheel revolves.
85. Camber:
Slope provided to road surface in transverse direction to drain off rain water from road
surface.
Usually camber is provided on straight roads by raising centre of carriage way with
respect to edges, forming a crown or highest point on center line.
It is also expressed in %.
Steep camber is provided in areas of heavy rainfall.
Types: 1. Parabolic; 2. Straight; 3. Combination of straight & parabolic.
Carriageway:
Metaled portion of road over which vehicles move.
Different types of carriageway according to material which used for construction.
86. Traffic Lane:
Carriage intended for one line of traffic movement is called a traffic lane.
Kerb:
Indicate boundary between carriageway and shoulder island or footpath.
Different types of kerb:
1. Low or mountable kerb (10 cm height)..
2. Semi barrier type kerb (15 cm height)..
3. Barrier type kerb (20 cm height).
4. Submerged kerb (Rural areas to provide lateral stability).
87. Shoulder:
Provided along road edge and are intended for accommodation of stooped
vehicles.
Serve as an emergency lane for vehicles.
Provide lateral support for base and surface course.
It is desirable to have a width of 4.6 m for shoulder.
A minimum width of 2.5 m is recommended for 2 lane rural highways.
88. Right of Way (ROW):
ROW or land width is width of land acquired for road, along its alignment.
It should be adequate to accommodate all cross-sectional elements of highway
and many reasonably provided for future developments.
To prevent ribbon developments along highways, control lies and building
lines may be provided.
Control line is a line which represents nearest limits of future uncontrolled
building activity in relation to a road.
Building line represents a line on either side of the road between which and
road no building is permitted at all.
89. Sight distance:
Safe and efficient operation of vehicle on roads depends among factors or
road length at which an obstruction, if any becomes visible to driver
indirection of travel.
In other words feasibility to see ahead or visibility is very important for safe
vehicle operation on a highway.
Sight distance available from a point is actual distance along road surface,
which a driver from specified height above carriageway has visibility of
stationary or moving objects.
In other words, sight distance is length of road visible ahead to driver at any
distance.
90. Stopping Sight Distance (SSD):
SSD is defined as distance needed for drivers to see an object on roadway
ahead and bring their vehicles to safe stop before colliding with an object.
Stopping Distance is the summation of lag distance (distance travelled by
vehicle during total reaction time) and braking distance (distance travelled by
vehicle after application of brake to a dead stop position).
SD = Vt +
𝑉2
2𝑔𝑓
[Here, V in m/sec & g = 9.81 m/𝑠𝑒𝑐2
]
SD = 0.278 Vt +
𝑉2
254𝑓
[Here, V in Km/hr]
Friction, f = 0.4~0.35 depending upon speed from 30 Kmph to 80 Kmph
91. Stopping Sight Distance (SSD) in slope:
SD for ascending gradient,
SD = vt +
𝑉2
2𝑔(𝑓+0.01𝑛)
[Here, V in m/sec & n in %]
SD = 0.278 Vt +
𝑉2
254(𝑓+0.01𝑛)
[Here, V in Km/hr & n in %]
SD for descending gradient,
SD = vt +
𝑉2
2𝑔(𝑓−0.01𝑛)
[Here, V in m/sec & n in %]
SD = 0.278 Vt +
𝑉2
254(𝑓−0.01𝑛)
[Here, V in Km/hr & n in %]
Minimum SSD for one-way traffic lane is equal to SD and for two-way traffic
lanes it is double of SD.
92. Problem-6: Calculate the safe SSD for design speed of 50 Kmph for (a) Two-way
traffic on a two lane road (b) Two-way traffic on a single plane road. Assume
coefficient of friction as 0.37 and reaction time of driver as 2.5 sec.
Solution: v = 50 Kmph =
50
3.6
m/sec = 13.9 m/sec
Stopping Distance, SD = vt +
𝑣2
2𝑔𝑓
= 13.9 x 2.5 +
13.92
2 𝑥 9.81 𝑥 0.37
= 61.4 m
(a) SSD for two-way traffic on a two lane road = SD = 61.4 m
(b) SSD for two-way traffic on a single lane = 2 x SD = 2 x 61.4 = 122.8 m
93. Problem-7: Calculate the safe SSD for design speed of 80 Kmph on a highway at a
descending gradient of 2% for f = 0.35.
Solution: v = 80 Kmph =
80
3.6
m/sec = 22.22 m/sec
Assume, t = 2.5
Stopping Distance, SD = vt +
𝑣2
2𝑔(𝑓−0.01𝑛)
= 22.22 x 2.5 +
22.222
2 𝑥 9.81 𝑥 (0.35−0.01 𝑥 2)
= 131.8 m.
94. Exercise-1: Calculate the safe SSD for design speed of 70 Kmph on a highway at a
ascending gradient of 1% for f = 0.37.
Solution: v = 70 Kmph =
70
3.6
m/sec = 19.44 m/sec
Assume, t = 2.5
Stopping Distance, SD = vt +
𝑣2
2𝑔(𝑓+0.01𝑛)
= 19.44 x 2.5 +
19.442
2 𝑥 9.81 𝑥 (0.37+0.01 𝑥 1)
= 99.29 m.
95. Exercise-2: Calculate the safe SSD for design speed of 65 Kmph on a highway at a
descending gradient of 3% for f = 0.4.
Solution: v = 65 Kmph =
65
3.6
m/sec = 18.06 m/sec
Assume, t = 2.5
Stopping Distance, SD = vt +
𝑣2
2𝑔(𝑓−0.01𝑛)
= 18.06 x 2.5 +
18.062
2 𝑥 9.81 𝑥 (0.4−0.01 𝑥 3)
= 90.08 m.
96. PIEV Theory:
According to this theory total reaction time of driver is split into four parts-
Perception:
It is the time required for sensation received by eyes or ears to be transmitted
to brain through nervous system and spinal chord.
In other words, it is time required to perceive an object or situation.
Intellection:
It is the time required for understanding situation.
It is also time required for comparing different thoughts, regrouping and
registering new sensation.
97. Emotion:
It is time elapsed during emotional sensation and disturbance such as fear,
anger or other emotional feelings such as superstition, etc. to situation.
Emotional time of a driver is likely to vary considerably during upon
problems involved.
Volition:
It is the time taken for final action.
It is also possible that driver may apply brakes or take any avoiding action by
reflux action, even without thinking.
98. Overtaking Sight Distance (OSD):
OSD is the minimum distance open to vision of driver of a vehicle intending
to overtake slow vehicle ahead safely against traffic in the opposite direction.
OSD is measured along the centre line.
99. OSD = 𝑑1 + 𝑑2 + 𝑑3 = 𝑑1 + (S + b + S) + 𝑑3
𝑑1 = 𝑣𝑏t [t is the reaction time & 𝑣𝑏is the velocity of overtaken vehicle (m/s)]
S = (0.7 𝑣𝑏 + 6) m
b = 𝑣𝑏T [ T =
4𝑆
𝑎
[a is the acceleration in m/𝑠𝑒𝑐2]
𝑑3 = vT [v is the design velocity of vehicle moving from opposite direction (m/s)]
𝑣𝑏
v
100. OSD = 𝑑1 + 𝑑2 + 𝑑3 = 𝑑1 + (S + b + S) + 𝑑3
= 𝑣𝑏t + 2 (0.7 𝑣𝑏 + 6) + 𝑣𝑏T + vT [𝑣𝑏 & v in m/sec]
=0.278𝑉𝑏t + 2 (0.7 𝑉𝑏 + 6) + 0.278𝑉𝑏T + 0.278VT [𝑉𝑏 & V in Km/hr]
In case of speed of overtaken vehicle 𝑉𝑏 is not given, then assume (V-16) Kmph.
Where, V is design speed in Kmph. Assume, 𝑣𝑏 = (v - 4.5) m/sec and v is design
speed in m/sec.
For one-way traffic, OSD = 𝑑1 + 𝑑2
For two-way traffic, OSD = 𝑑1 + 𝑑2 + 𝑑3
Over taking zone = 3 OSD to 5 OSD
𝑆𝑃1 = Sign Post “ Overtaking zone ahead”
𝑆𝑃2 = Sign Post “ End of overtaking zone”
101. Problem-8: The speed of overtaking and overtaken vehicles are 70 & 40 Kmph
respectively on a two-way traffic road. If the acceleration of overtaking vehicle is
0.99 m/𝑠𝑒𝑐2, calculate and draw the overtaking zone.
Solution: v =
70
3.6
= 19.4 m/sec; 𝑣𝑏 =
40
3.6
= 11.11 m/sec; a = 0.99 m/𝑠𝑒𝑐2
Assume, t = 2 sec.
𝑑1 = 𝑣𝑏t = 11.1 x 2 = 22.2 m
S = (0.7 𝑣𝑏 + 6) m = 0.7 x 11.11 + 6 = 13.8 m
T =
4𝑆
𝑎
=
4 𝑥 13.8
0.99
= 7.47 sec
b = 𝑣𝑏T = 11.1 x 7.47 = 82.9 m
𝑑2 = 𝑣𝑏T + 2S = 82.9 + 2 x 13.8 = 110.5 m
𝑑3 = vT = 19.4 x 7.47 = 144.9 m
OSD = 𝑑1 + 𝑑2 + 𝑑3
= 22.2 + 110.5 + 144.9
= 277.6 ≈ 278 m
102. Minimum length of overtaking zone = 3 OSD = 3 x 278 m = 834 m
Desirable length of overtaking zone = 5 OSD = 5 x 278 m = 1390 m
𝑆𝑃1
𝑆𝑃2
𝑆𝑃
1
𝑆𝑃
2
278 m
278 m
278 m
278 m
834 m to 1390 m
Fig. Overtaking Zone
𝑆𝑃1 = Sign Post “ Overtaking zone ahead”
𝑆𝑃2 = Sign Post “ End of overtaking zone”
103. Superelevation:
Superelevation or cant or banking is transverse slope provided at horizontal
curve to counteract centrifugal force by raising the outer edge, throughout
length of horizontal curve.
When outer edge is raised, a component of curve weight will be
complemented in counteracting effect of centrifugal force.
104. e + f =
𝑣2
𝑔𝑅
…………….(1)
e = Rate of superelevation
f = Co-efficient of lateral friction 0.15
v = Speed of vehicle, m/sec
R = Radius of curve, m and
g = 9.8 m/𝑠𝑒𝑐2
If there is no friction due to some practical reasons, then f = 0 and eq (1) becomes,
e =
𝑣2
𝑔𝑅
=
𝑣2
127𝑅
This results in situation where pressure on outer and inner wheels are same, requiring
very high superelevation e.
105. If there is no superelevation provided due to some practical reasons, then e = 0 and
eq (1) becomes,
f =
𝑣2
𝑔𝑅
=
𝑣2
127𝑅
This results in a very high co-efficient of friction.
If e = 0 and f = 0.15 then for safe travelling speed from eq (1) is given by,
𝑣𝑎 = 𝑓𝑔𝑅
Where, 𝑣𝑎 is restricted speed.
106. Design of Superelevation:
Step-1: Find e for 75% of design speed neglecting f. i.e,
𝑒1 =
(0.75𝑣)2
𝑔𝑅
Step-2: If 𝑒1 ≤ 0.07, then e = 𝑒1 =
(0.75𝑣)2
𝑔𝑅
else if, 𝑒1 > 0.07. Then e = 0.07 and go to step 3.
Step-3: Find 𝑓1 for design speed and max e i.e,
𝑓1 =
𝑣2
𝑔𝑅
- e
If 𝑓1 < 0.15, then maximum e = 0.07 is safe, else go to step-4.
107. Step-4: Find allowable speed 𝑣𝑎 for maximum e = 0.07 and f = 0.15,
𝑣𝑎 = 0.22𝑔𝑅 = 27.94 𝑅 (Kmph)
If 𝑣𝑎 ≥ v, then design is adequate. Otherwise, use speed adopt control
measures or look for speed control measures.
108. Problem-9: Design the rate of superelevation for a horizontal highway curve of
radius 500 m and speed 100 Kmph.
Solution:
v =
100
3.6
= 27.78 m/sec
Step-1: 𝑒1 =
(0.75𝑣)2
𝑔𝑅
=
(0.75 𝑥 27.78)2
9.81 𝑥 500
= 0.089
Step-2: As 𝑒1 > 0.07 , then provide maximum superelevation, e = 0.07
Step-3: 𝑓1 =
𝑣2
𝑔𝑅
- e =
27.782
9.81 𝑥 500
- 0.07 = 0.087
As 𝑓1 < 0.15.
So, Design is safe with a superelevation of 0.07.
109. Problem-10: Design the rate of superelevation for a horizontal highway curve of
radius 200 m and speed 80 Kmph.
Solution:
v =
80
3.6
= 22.22 m/sec
Step-1: 𝑒1 =
(0.75𝑣)2
𝑔𝑅
=
(0.75 𝑥 22.22)2
9.81 𝑥 200
= 0.14
Step-2: As 𝑒1 > 0.07 , then provide maximum superelevation, e = 0.07
Step-3: 𝑓1 =
𝑣2
𝑔𝑅
- e =
22.222
9.81 𝑥 200
- 0.07 = 0.18
As 𝑓1 > 0.15, then provide maximum friction co-efficient, f = 0.15 and
speed should be restricted.
110. Step-4: Allowable speed 𝑣𝑎 for maximum e = 0.07 and f = 0.15,
𝑣𝑎 = 27.94 𝑅 (Kmph)
= 27.94 𝑥 200 = 74.75 Kmph ≈ 70 Kmph
Hence, the speed may be restricted to 70 Kmph at this curve.
111. Attainment of Superelevation:
May be split into two categories:
i ) Elimination of crown of cambered section.
1. Rotating outer edge about crown: Outer half of cross slope is rotated about
crown at a desired rate such that this surface falls on same plane as inner half.
Fig. Outer edge rotated about the crown
Levels of outer edge
112. 2. Shifting position of crown: Also known as diagonal crown method. Position of
crown is progressively shifted outwards. Thus increasing width of inner half of
cross section progressively.
Positions of crown
Fig. Crown shifted outwards
113. ii) Rotation of pavement cross section to attain full superelevation.
1. Rotation about centre line: Pavement is rotated such that inner edge is
depressed and outer edge is raised both by half total amount of super elevation.
i.e. by
𝐸
2
w. r. to centre.
Inner edge
Outer edge
𝐸
2
𝐸
2
Fig. Rotating about centers
114. 2. Rotation about the inner edge: Pavement rotated raising outer edge as well as
centre such that outer edge is raised by full amount of super elevation, E w. r. to
inner edge.
Inner edge Outer edge
𝐸
2
E
Fig. Rotating about the inner edge
115. Problem-11: An engineer checking the speed characteristics confidence level 95%,
acceptable limit 1.0 kmph and 130 spot variance 25 Kmph. Has the engineer meet
the entire requirement?
Solution:
We know,
Sample, N = (
𝑍𝜎
𝑑
)2
For 95% confidence level, Z = 1.96 and 𝜎2 = 25. So, σ = 5 and d = 1 Kmph.
N = (
1.96 𝑥 5
1
)2 = 96.04 > 95
∴ Yes, the engineer has meet the requirement.