Tom Hinton has over 34 years of experience in mechanical contracting and project management. He has managed multi-million dollar projects for the US Air Force, NASA, and hospitals. His background includes experience as an estimator, project manager, construction manager, and quality control manager for companies in Florida, Texas, Hawaii, Guam, and the Bahamas. He is proficient in HVAC, plumbing, electrical, and infrastructure work.

1. TOM Hinton
3114 Victory Palm Dr.
Edgewater Fl. 32141
US cell (321) 201-7313
0BandPL@gmail.com
OBJECTIVE:
To obtain a permanent position in a growing company with advancement potential and an opportunityto
put my experience to work. In the past 34 years I have acquired a wealth of knowledge that willbenefit
greatly any employer. I have an excellent track record of delivering projects on time and within budget.
Please notice that while with DCK WW I went to problem jobs to get them back on track and compliant
with specifications.
My EMPLOYMENT
6/15 to 4/16 TD Industries
Construction Manager Special Projects, Ft. Worth Tx, MechanicalPM
My duties include but are not limited to, all day to day mechanical trade work and adherence to
schedules, review and approval of design documents and submittals, supervision of all phases of
mechanicaltrades, ie. HVAC, chilled water piping, all duct and air handling equipment, Plumbing,
Infrastructure, controls, TAB, grease hood ducting and testing. Full responsibility for all execution of such
work includingcode compliance, testing and coordination with other trades, day to day operations of all
field mechanical work and coordination and integration of these trades to facilitate needs and schedule,
evaluation ofdesign changes and scope mods as they pertain to these areas, also for all close out
documentation andowner instructions as per our contract. Responsible for price checking MEP change
orders from subcontractors and budget estimates for same. Most of our projects were on NAS JRB Ft. Worth
and under USACE control. Had to use their QCS program for all QA/QC for all of my projects.
1214 to 6/15 Gallo and Associates
Baha Mar Resort and Casino, Nassau, Bahamas, Senior MEP PM
My duties included but were not limited to, review and approval of design documents, supervision ofall
phases of mechanical trades, ie. HVAC, chilled water piping, all duct and air handlingequipment,
Plumbing, Electrical, Infrastructure, controls, TAB and Fire Sprinkler. Full responsibility for all execution of
such work including code compliance, testing and coordination with other trades, day to day operations of
all field MEP work, quality control, coordination and integration of these contractors to fit the overall
project needs. Also adherence to the schedule, evaluation of design changes and scope mods as they
pertain to these areas and for all close out documentation, owner instructions and quality of the project
as per our contract.
614 to 1214…Layton/dck Pacific Hawaii JV
Kapi'olani Medical Center Honolulu, Hi. MEP Coordinator/Supt
My duties included but were not limited to, all day to day inspection of MEP trade work and adherence to
schedules, review and approval of design documents, DFOW’s and submittals, supervision of all phases of
testing and documentation of mechanical trades. QA/QC of all HVAC, chilled water piping, all duct and air
handling equipment, Plumbing, Electrical, Infrastructure, controls, TAB, grease hood ducting and Fire
Sprinkler, including all initial, prep and follow up meetings. Full responsibility for all compliance of suchwork
including code compliance, testing and coordination with other trades, day to day observation of all field
MEP work, all site underground and drainage, compaction testing, asphalting the parking lot after such
work was complete, and coordination and integration of these tasks to meet DCK's needs and schedule,
evaluation of design changes and scope mods as they pertain to these areas, also for all documentation and
reporting to third party inspector as per our contract. Responsible for checking MEP change orders from
subcontractors and budget estimates for same. Also, was superintendent for the complete ground up build
of the boiler/sterilizer building from underground until completion. This included all MEP, underground
piping, reinforced concrete slab, block walls, roofing, windows and interior finishes.

2. 6/13 to 6/14 dck Pacific Guam,
Guam Regional Medical Center, Dededo, Guam MEP QC
My duties included but were not limited to, review and approval of submittals and DFOW’s of MEP trades,
QC of all phases of mechanical trades including all prep, initial and follow up meetings as they pertained to
MEP, all lift plans that related to MEP, I was also associate QC for concrete, framing, interior finishes and
infrastructure work, site and underground utilities including all testing and documentation to the owner, I
helped hold the QC meetings for these with the other QA/QC member. I was QC in charge of HVAC, chilled
water piping above and below ground, all duct and air handling equipment, Plumbing, Electrical,
Infrastructure, controls, TAB, grease hood ducting and Fire Sprinkler. Full responsibility for all
documentation of such work including code compliance, testing and coordination with other trades,
coordination and integration of these contractors to DCK's needs and schedule, evaluation of design
changes and scope mods as they pertain to theseareas, also for all close out documentation and owner
instructions as per our contract. Responsible for checking documentation for med gas installation and
testing as well as reporting test results to owner.
10/12 to 6/13……………Betenbow/dck St. Maarten NV JV
A.U.C. St Maarten Senior MEP Coordinator
DCK self-performed, by hiring local sub-contractors and laborers, all MEP, concrete and interior framing
and finish work. There was also an extensive amount of infrastructure work like new underground
drainage, new water lines, new small reverse osmosis water treatment plant and new septic system
including new underground tanks and pumping station for the lower half of the campus. I was responsible
for all installation and QC for these areas, and submittals of all trades. HVAC, chilled water piping, all
duct and air handlingequipment, Plumbing, Electrical, Infrastructure, controls, TAB and Fire Sprinkler. Full
responsibility for all execution of such work including code compliance, testing and coordination, day to
day operations of all field MEP work and coordination and integration of these operations to DCK's needs
and schedule, evaluation of design changes and scope mods as they pertain to these areas, also for all
close out documentation to owner and owner instructions as per our contract. Held weekly MEP meetings
for all phases of this work.
8/11 to 10/12…………dck Ttec JV MCAS Yuma
MEP Engineer/ MEP Coordinator
My duties included but were not limited to, review and approval of design documents, reviewing and
approval of MEP contractor submittals such as HVAC equipment, ductwork, DDC controls, Chillers, boilers,
etc. Also fire sprinkler piping, valves, pre-action systems as well as Dry Agent systems, plumbing pipe
designs, fixtures backflow preventers and automated flush valves, also involved in low voltage and line
voltage electrical equipment and large emergency generators, day to day operations of field MEP
contractors and the integration of the contractors to dck Ttec needs and schedule, evaluation of CR´s,
design changes and scope modifications as it effects the contract costs. There was also extensive
infrastructure work like pipe bursting, pump stations, new underground piping, new underground electrical
piping, new sub station including slab and fence work. Had to comply with all NAVFAC safety and submittal
requirements.
Training:
A.H.A.
S.T.A.R.T
Safety Health and Environmental Manual
Construction Quality Management for Contractors Certified USACE OSHA 30 Hour
JS-US007 Level 1 Antiterrorism Awareness Training
04/04 to 7/11… Climatic Refrigeration and A/C
West Melbourne, Florida
Project Manager/ Estimator
My duties include but are not limited to, management of all phases ofprojects ranging from small DX systems
to large chilled water systems includingduct work, black iron and pre-insulated PVC piping and various types of
insulation, estimating and buying out of these types of projects. Also, negotiation ofchange orders for both
civilian and govt. projects and all related documentation involved in these. Manpower loading for both small

3. and large projects andmatching people with their skill set as needed to facilitate the needs for a givenproject.
Projects managed and estimated include NASA, US Air Force, state, countyand large retail malls and shopping
plazas. Also, was PM on two hospital jobs,the Palm Bay and Cape Canaveral hospitals, also 3 surgery centers,
includingall HVAC, C/W and H/W piping, DDC controls and all stainless steel med gas.piping and butt fusion
welds. Responsible for all UL assemblies related toHVAC.
09/98 to 04/04 City of Cocoa Beach Golf Course Cocoa
Beach, Florida
Assistant Golf Pro
• Greeting guests, managing the pro shop, teaching and staff management. Took
time to play tournament golf to attempt to get my Senior PGA Tourcard.
• 04/96 to 06/98 Britt's A/C and Fire Sprinkler
Titusville, Florida
Project Manager/Estimator
Managed and estimated commercial projects mainly for NASA and USAF for work at Cape Canaveral AFS
and KSC. Responsibilities included but not limited to scheduling, manpower estimations, RFP
documentation for several disciplines of mechanical contracting. ie. duct work, chilled water piping, fire
sprinkler piping, plumbing piping as well as controls and subcontractors. 04/93 to 03/96 Coastal
Mechanical Co. Inc.
West Melbourne, Florida
Sheet metal shop and Special Projects Manager/Estimator
Initially held position as sheet metal shop manager. Responsibilities included but were not limited to,
supplies & inventory, shipping/receiving, input of duct and fittings into Vulcan system along with
scheduling deliveries to job sites and material procurement for those jobs. Assumed the additional position
of Special Projects Div. Manager and estimated and ran smaller projects. Responsible for
all aspects of these projects and design and layout throughout the project as well as warranty.
1978 THROUGH 1993 ESTIMATING EXPERIENCE UPON REQUEST EDUCATION
Dekalb Community College Decatur, Georgia West
Georgia College Carrollton, Georgia
Carrier Engineering School Atlanta, Georgia
Trane Engineering School Orlando Fl.
U S A C E Q A / Q C C e r t i f i e d L . A . 2 0 1 2
REFERENCES Available upon request.