This document summarizes a literature review on the use of bituminous felt or membrane sheets in modern waterproofing methods. It discusses 12 peer-reviewed papers that investigate properties of bituminous felt/sheets, compare modern and traditional waterproofing techniques, and analyze defects in membrane installation. Key findings include that modern techniques like pre-applied bonded membranes and polymer-modified bitumen provide better protection than traditional brickbat coba. However, more comparative studies are needed between applying modern bituminous felt versus traditional methods on structural parameters. Increased awareness of modern techniques could promote their use over old systems, especially in developing countries like India.
The present research work demonstrates the
preparation of Copper Oxide Nanoparticles (CuO NPs) and
investigates the thermo mechanical properties of the CuO NPs
embedded in the polymer composites experimentally. In this study,
CuO NPs were produced by aqueous precipitation method and
morphology of the NPs was studied using Field Emission
Transmission Electron Microscope (FESEM). Epoxy resin and glass microsphere were considered the base material for the preparation of
the Nano based polymer composites. In order to fabricate the Nano
based polymer composites, CuO NPs with 1.0wtpercentage were
embedded in the base material by means of compression moulding
press. Nano composites proved higher thermal conductivity
enhancement rather than the base material. While comparing to the
base material, the maximum four-point bending strength of 415 MPa
was obtained from the Nano based polymer composites. The test
results obtained from the TG study revealed that an addition of CuO
NPs had acted as the thermal retardant and CuO NPs had delayed
thermal degradation of the Nano based polymer composites. Based
on the test results, it can be suggested that the newly fabricated
nanocomposites have achieved the improved thermal and mechanical
properties.
A Review on Recent Trends in Non Destructive Testing Applicationsvivatechijri
The field of NDT is a very large and interdisciplinary field that plays a critical role in inspection of
crucial component. These test may fail due to either the fault in the equipment used, the miss application of the
methods or the However, these techniques generally require considerable operator skill and interpreting test
results. This paper presents the reviews of different works in the area of NDT and tries to find out recent and
trends available in industries and other fields in order to minimize the total equipment cost, minimize damages
and maximize the safety of machines, structures and materials
The present research work demonstrates the
preparation of Copper Oxide Nanoparticles (CuO NPs) and
investigates the thermo mechanical properties of the CuO NPs
embedded in the polymer composites experimentally. In this study,
CuO NPs were produced by aqueous precipitation method and
morphology of the NPs was studied using Field Emission
Transmission Electron Microscope (FESEM). Epoxy resin and glass microsphere were considered the base material for the preparation of
the Nano based polymer composites. In order to fabricate the Nano
based polymer composites, CuO NPs with 1.0wtpercentage were
embedded in the base material by means of compression moulding
press. Nano composites proved higher thermal conductivity
enhancement rather than the base material. While comparing to the
base material, the maximum four-point bending strength of 415 MPa
was obtained from the Nano based polymer composites. The test
results obtained from the TG study revealed that an addition of CuO
NPs had acted as the thermal retardant and CuO NPs had delayed
thermal degradation of the Nano based polymer composites. Based
on the test results, it can be suggested that the newly fabricated
nanocomposites have achieved the improved thermal and mechanical
properties.
A Review on Recent Trends in Non Destructive Testing Applicationsvivatechijri
The field of NDT is a very large and interdisciplinary field that plays a critical role in inspection of
crucial component. These test may fail due to either the fault in the equipment used, the miss application of the
methods or the However, these techniques generally require considerable operator skill and interpreting test
results. This paper presents the reviews of different works in the area of NDT and tries to find out recent and
trends available in industries and other fields in order to minimize the total equipment cost, minimize damages
and maximize the safety of machines, structures and materials
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.