Cost Comparative Study On Steel Frame Folded Plate Roofing System Vs Conventi...IJERA Editor
Due to ever-increasing of construction materials, it becomes the foremost duty of a civil engineer to design economical and durable structures. In this project an attempt has been made to compare the cost of two types of roofing systems viz. conventional truss roofing system and steel frame folded plate roofing system. The steel frame folded plate roofing system, though found to be economical, is not widely practiced in India due to lack of knowledge regarding its analysis and design. On contrary to it, the conventional truss roofing system still remains as the widely adopted method of roofing for different types of buildings due to the available literature on its analysis, design and construction. The analysis and design of conventional truss roofing system and folded plate roofing system have been carried out for various spans. The analysis is carried out in STAAD.Pro 2004, which is based on stiffness method. Load calculations and design done manually, based on IS:875-1987, IS:800-1984 & SP:38(1987)
CADmantra Technologies Pvt. Ltd. is one of the best Cad training company in northern zone in India . which are provided many types of courses in cad field i.e AUTOCAD,SOLIDWORK,CATIA,CRE-O,Uniraphics-NX, CNC, REVIT, STAAD.Pro. And many courses
Contact: www.cadmantra.com
www.cadmantra.blogspot.com
www.cadmantra.wix.com
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
SHEAR PERFORMANCE OF FIBER REINFORCED SELF COMPACTING CONCRETE DEEP BEAMSIAEME Publication
The self-compacting concrete (SCC) is the newest innovating category of high performance concrete. The shear behavior of Fiber Reinforced Self-Compacted Concrete (FRSCC) deep beams was investigated. The experimental program consisted of twelve simply supported beams tested up to failure under four-point load. The key parameters covered in this investigation were steel fibers ratios (0.0, 0.50, 0.75 & 1.00%) and the effective shear span to depth ratio; a/d that varied from 0.6 to 1.0. Also, the main flexure reinforcement ratio was variable (1.0, 1.60 and 2.20 percent). In addition, vertical and horizontal web reinforcement effect was investigated. The mid-span deflection, cracks, reinforcement and concrete strains of the tested beams were recorded and compared. Test results pointed out that the steel fibers enhanced the cracking load, ultimate capacity, displacement and energy absorption of the tested FRSCC deep beams.
Cost Comparative Study On Steel Frame Folded Plate Roofing System Vs Conventi...IJERA Editor
Due to ever-increasing of construction materials, it becomes the foremost duty of a civil engineer to design economical and durable structures. In this project an attempt has been made to compare the cost of two types of roofing systems viz. conventional truss roofing system and steel frame folded plate roofing system. The steel frame folded plate roofing system, though found to be economical, is not widely practiced in India due to lack of knowledge regarding its analysis and design. On contrary to it, the conventional truss roofing system still remains as the widely adopted method of roofing for different types of buildings due to the available literature on its analysis, design and construction. The analysis and design of conventional truss roofing system and folded plate roofing system have been carried out for various spans. The analysis is carried out in STAAD.Pro 2004, which is based on stiffness method. Load calculations and design done manually, based on IS:875-1987, IS:800-1984 & SP:38(1987)
CADmantra Technologies Pvt. Ltd. is one of the best Cad training company in northern zone in India . which are provided many types of courses in cad field i.e AUTOCAD,SOLIDWORK,CATIA,CRE-O,Uniraphics-NX, CNC, REVIT, STAAD.Pro. And many courses
Contact: www.cadmantra.com
www.cadmantra.blogspot.com
www.cadmantra.wix.com
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
SHEAR PERFORMANCE OF FIBER REINFORCED SELF COMPACTING CONCRETE DEEP BEAMSIAEME Publication
The self-compacting concrete (SCC) is the newest innovating category of high performance concrete. The shear behavior of Fiber Reinforced Self-Compacted Concrete (FRSCC) deep beams was investigated. The experimental program consisted of twelve simply supported beams tested up to failure under four-point load. The key parameters covered in this investigation were steel fibers ratios (0.0, 0.50, 0.75 & 1.00%) and the effective shear span to depth ratio; a/d that varied from 0.6 to 1.0. Also, the main flexure reinforcement ratio was variable (1.0, 1.60 and 2.20 percent). In addition, vertical and horizontal web reinforcement effect was investigated. The mid-span deflection, cracks, reinforcement and concrete strains of the tested beams were recorded and compared. Test results pointed out that the steel fibers enhanced the cracking load, ultimate capacity, displacement and energy absorption of the tested FRSCC deep beams.
Numerical modeling on behaviour of reinforced concrete exterior beam column j...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Analysis of Prestressed Concrete Girder for Bridgesijtsrd
Today bridge building has gained worldwide importance. Bridges are the key elements in every road network and the use of pre stressed girder bridges is becoming more and more popular in bridge construction due to their better stability, service friendliness, economy and durability, aesthetic and structural appearance. Typically reinforced concrete construction, steel construction or steel composite construction is used. In the case of high spans, reinforced concrete construction is uneconomical due to the larger span. , the cross section is used more efficiently than the reinforced concrete cross section. Pre stressed concrete is used for long span bridges with a span of more than 10 m. Conventionally, when calculating bridges, the superstructure and substructure are analyzed separately. The superstructure is usually a grid made up of main girders, transverse membranes and a deck slab. a grid of linear elements The columns of the main girders are anchored. The superstructure is examined according to IRC 62014 and according to IRC 182000 for unconsidered gravitational loads and moving vehicle loads. Reduction of the stress level and also of the deflection compared to the straight tendon profile. Avinash Kumar Vidyarthi | Dr. P. K. Singhai | Rohit Sahu "Analysis of Prestressed Concrete Girder for Bridges" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd46362.pdf Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/46362/analysis-of-prestressed-concrete-girder-for-bridges/avinash-kumar-vidyarthi
Lateral Load Analysis of a Building with & Without Knee BracingIJERA Editor
In last decades steel structures has played an important role in construction industry. Providing strength, stability
and ductility are major purposes of seismic design. It is necessary to design a structure to perform well under
seismic loads. Steel braced frame is one of the structural systems used to resist earthquake loads in structures.
Steel bracing is economical, easy to erect, occupies less space and has flexibility to design for meeting the
required strength and stiffness. Bracing can be used as retrofit as well. There are various types of steel bracings
such as Diagonal, X, K, V, inverted V type or chevron and global type concentric bracings. In the present study,
it was shown that modelling of the G+4 steel bare frame with various bracings (X, V, inverted V, and Knee
bracing) by computer software SAP2000 and pushover analysis results are obtained. Comparison between the
seismic parameters such as base shear, roof displacement, time period, storey drift, performance point for steel
bare frame with different bracing patterns are studied. It is found that the X type of steel bracings significantly
contributes to the structural stiffness and reduces the maximum interstate drift of steel building than other
bracing systems.
EXPERIMENTAL INVESTIGATION ON EFFECT OF ANGULAR SHEAR CONNECTOR IN COMPOSITE ...IAEME Publication
The use of cold-formed steel sections as major structural members is still limited. This is largely due to thinness of the sections. Exploitation of composite principles seems appropriate for promoting the use of the sections to a wider range of applications. A steel-concrete composite column is a compression member, comprising either a concrete encased hot-rolled steel section or a concrete filled tubular section of hot-rolled steel and is generally used as a load-bearing member in a composite framed structure and girders used as a beam sections.
Finite Element Modeling On Behaviour Of Reinforced Concrete Beam Column Joint...IJERA Editor
Recent earthquakes have demonstrated that most of the reinforced concrete structures were severely damaged during earthquakes and they need major repair works. Beam column joints, being the lateral and vertical load resisting members in reinforced concrete structures are particularly vulnerable to failures during earthquakes. The existing reinforced concrete beam column joints which are not designed as per code IS13920:1993 must be strengthened since they do not meet the ductility requirements. The Finite element method (FEM) has become a staple for predicting and simulating the physical behaviour of complex engineering systems. The commercial finite element analysis (FEA) programs have gained common acceptance among engineers in industry and researchers. The details of the finite element analysis of beam column joints retrofitted with carbon fibre reinforced polymer sheets (CFRP) carried out using the package ANSYS are presented in this paper. Three exterior reinforced concrete beam column joint specimens were modelled using ANSYS package. The first specimen is the control specimen. This had reinforcement as per code IS 456:2000. The second specimen which is also the control specimen. This had reinforcement as per code IS 13920:1993. The third specimen had reinforcement as per code IS 456:2000 and was retrofitted with carbon fibre reinforced polymer (CFRP) sheets. During the analysis both the ends of column were hinged. Static load was applied at the free end of the cantilever beam up to a controlled load. The performance of the retrofitted beam column joint was compared with the control specimens and the results are presented in this paper.
Design and economical of roof trusses & purlins (comparison of limit stat...eSAT Journals
Abstract For a structural design to be satisfactory, generally four major objectives – utility, safety, economical and elegance must be fulfilled. This paper presents a study on behaviour and economical of roof trusses and purlins by comparison of limit state and working stress method. Roof trusses and purlins are therefore an integral part of an industrial building and the like for supporting the roofing system. This paper presents a study on behaviour and economical of fink type roof trusses, channel section purlins by comparison of limit state and working stress method. This study involves in examination of theoretical investigations of specimens in series. Overall two methods were designed and comparison of all the internal force, economical, and hence, to evaluate the co-existing moments and shear forces at the critical cross-section with same configuration area by keeping all other parameters constant. The theoretical data are calculated using Indian Standard code IS 875-1975 (part III), IS 800 – 2007 using limit state method, IS 800- 1984 using working stress method and the section properties of the specimens are obtained using steel table. The specimens are designed under uniformly distributed loading with simply supported condition. The research project aims to provide which method is economical, high bending strength, more load carrying capacity and high flexural strength. The studies reveal that the theoretical investigations limit state method design is high bending strength, high load caring capacity, minimum deflection and minimum local buckling& distortional buckling compare to the working stress method. But working stress method is most economical compare to the limit state method design. Keywords bending strength, deflection, limit state method, purlins, roof trusses, working stress method.
Numerical modeling on behaviour of reinforced concrete exterior beam column j...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Analysis of Prestressed Concrete Girder for Bridgesijtsrd
Today bridge building has gained worldwide importance. Bridges are the key elements in every road network and the use of pre stressed girder bridges is becoming more and more popular in bridge construction due to their better stability, service friendliness, economy and durability, aesthetic and structural appearance. Typically reinforced concrete construction, steel construction or steel composite construction is used. In the case of high spans, reinforced concrete construction is uneconomical due to the larger span. , the cross section is used more efficiently than the reinforced concrete cross section. Pre stressed concrete is used for long span bridges with a span of more than 10 m. Conventionally, when calculating bridges, the superstructure and substructure are analyzed separately. The superstructure is usually a grid made up of main girders, transverse membranes and a deck slab. a grid of linear elements The columns of the main girders are anchored. The superstructure is examined according to IRC 62014 and according to IRC 182000 for unconsidered gravitational loads and moving vehicle loads. Reduction of the stress level and also of the deflection compared to the straight tendon profile. Avinash Kumar Vidyarthi | Dr. P. K. Singhai | Rohit Sahu "Analysis of Prestressed Concrete Girder for Bridges" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd46362.pdf Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/46362/analysis-of-prestressed-concrete-girder-for-bridges/avinash-kumar-vidyarthi
Lateral Load Analysis of a Building with & Without Knee BracingIJERA Editor
In last decades steel structures has played an important role in construction industry. Providing strength, stability
and ductility are major purposes of seismic design. It is necessary to design a structure to perform well under
seismic loads. Steel braced frame is one of the structural systems used to resist earthquake loads in structures.
Steel bracing is economical, easy to erect, occupies less space and has flexibility to design for meeting the
required strength and stiffness. Bracing can be used as retrofit as well. There are various types of steel bracings
such as Diagonal, X, K, V, inverted V type or chevron and global type concentric bracings. In the present study,
it was shown that modelling of the G+4 steel bare frame with various bracings (X, V, inverted V, and Knee
bracing) by computer software SAP2000 and pushover analysis results are obtained. Comparison between the
seismic parameters such as base shear, roof displacement, time period, storey drift, performance point for steel
bare frame with different bracing patterns are studied. It is found that the X type of steel bracings significantly
contributes to the structural stiffness and reduces the maximum interstate drift of steel building than other
bracing systems.
EXPERIMENTAL INVESTIGATION ON EFFECT OF ANGULAR SHEAR CONNECTOR IN COMPOSITE ...IAEME Publication
The use of cold-formed steel sections as major structural members is still limited. This is largely due to thinness of the sections. Exploitation of composite principles seems appropriate for promoting the use of the sections to a wider range of applications. A steel-concrete composite column is a compression member, comprising either a concrete encased hot-rolled steel section or a concrete filled tubular section of hot-rolled steel and is generally used as a load-bearing member in a composite framed structure and girders used as a beam sections.
Finite Element Modeling On Behaviour Of Reinforced Concrete Beam Column Joint...IJERA Editor
Recent earthquakes have demonstrated that most of the reinforced concrete structures were severely damaged during earthquakes and they need major repair works. Beam column joints, being the lateral and vertical load resisting members in reinforced concrete structures are particularly vulnerable to failures during earthquakes. The existing reinforced concrete beam column joints which are not designed as per code IS13920:1993 must be strengthened since they do not meet the ductility requirements. The Finite element method (FEM) has become a staple for predicting and simulating the physical behaviour of complex engineering systems. The commercial finite element analysis (FEA) programs have gained common acceptance among engineers in industry and researchers. The details of the finite element analysis of beam column joints retrofitted with carbon fibre reinforced polymer sheets (CFRP) carried out using the package ANSYS are presented in this paper. Three exterior reinforced concrete beam column joint specimens were modelled using ANSYS package. The first specimen is the control specimen. This had reinforcement as per code IS 456:2000. The second specimen which is also the control specimen. This had reinforcement as per code IS 13920:1993. The third specimen had reinforcement as per code IS 456:2000 and was retrofitted with carbon fibre reinforced polymer (CFRP) sheets. During the analysis both the ends of column were hinged. Static load was applied at the free end of the cantilever beam up to a controlled load. The performance of the retrofitted beam column joint was compared with the control specimens and the results are presented in this paper.
Design and economical of roof trusses & purlins (comparison of limit stat...eSAT Journals
Abstract For a structural design to be satisfactory, generally four major objectives – utility, safety, economical and elegance must be fulfilled. This paper presents a study on behaviour and economical of roof trusses and purlins by comparison of limit state and working stress method. Roof trusses and purlins are therefore an integral part of an industrial building and the like for supporting the roofing system. This paper presents a study on behaviour and economical of fink type roof trusses, channel section purlins by comparison of limit state and working stress method. This study involves in examination of theoretical investigations of specimens in series. Overall two methods were designed and comparison of all the internal force, economical, and hence, to evaluate the co-existing moments and shear forces at the critical cross-section with same configuration area by keeping all other parameters constant. The theoretical data are calculated using Indian Standard code IS 875-1975 (part III), IS 800 – 2007 using limit state method, IS 800- 1984 using working stress method and the section properties of the specimens are obtained using steel table. The specimens are designed under uniformly distributed loading with simply supported condition. The research project aims to provide which method is economical, high bending strength, more load carrying capacity and high flexural strength. The studies reveal that the theoretical investigations limit state method design is high bending strength, high load caring capacity, minimum deflection and minimum local buckling& distortional buckling compare to the working stress method. But working stress method is most economical compare to the limit state method design. Keywords bending strength, deflection, limit state method, purlins, roof trusses, working stress method.
Analysis of High Rise Building Connection for Square Hollow Beam and Column U...ijtsrd
Most of the steel structures in India are made of conventional steel sections such as angle, channel and beam sections . However, new hollow steel sections such as square and rectangular hollow sections are gaining popularity in recent steel constructions due to a number of advantages such as its higher strength to weight ratio, better fire resistance properties, higher radius of gyration, lesser surface area, etc. This type of hollow sections can save cost up to 30 to 50 over the conventional steel sections Tata Steel brochure, 2012 17 . But unlike the conventional steel sections these hollow sections do not have standard connection details available in design code or in published literature. To overcome this problem the objective of the present study was identified to develop a suitable and economic connection detail between two square hollow sections which should be capable of transmitting forces smoothly and easy to be fabricated. To achieve the above objective, a square hollow beam to square hollow column connection was selected and modeled in commercial finite element software ABAQUS. This model was analyzed for nonlinear static pushover analysis considering a number of connection details. Following four alternative scheme of connection details were selected for this study i using end plate, ii using angle section, iii using channel sections, and iv using collar plates. The base model rectangular hollow beam welded to one face of the rectangular hollow column is also studied for reference. The performance of the selected connection details are compared and the best performing connection details is recommended for rectangular hollow beam to rectangular hollow column joints. The result shows that the load carrying capacity of the joint and the maximum deformation capacity is highly sensitive to the type of connection used. Also, the location of formation of plastic hinges in the structure which can beat joint or at beam depends highly on the type of connection used. Udit Dubey | Kapil Mandloi | Renu Tiwari "Analysis of High Rise Building Connection for Square Hollow Beam and Column Using Fem Software Abaqus" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47704.pdf Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/47704/analysis-of-high-rise-building-connection-for-square-hollow-beam-and-column-using-fem-software-abaqus/udit-dubey
Finite Element Modeling of RCC voided Beam and it’s comparison with conventio...inventionjournals
In the construction of modern buildings, a network of pipes and ducts is necessary to accommodate essential services like water supply, sewage, air-conditioning, electricity, telephone, and computer network. Usually, these pipes and ducts are placed underneath the beam soffit and, for aesthetic reasons, are covered by a suspended ceiling, thus creating a dead space. The provision of transverse openings in floor beams to facilitate the passage of utility pipes and service ducts results not only in a more systematic layout of pipes and ducts, it also translates into substantial economic savings in the construction of a multistorey building
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.