This document provides information on various accessories for the Speedycut FK/NC 800 bridge saw, including: 1) An accessory that allows motorized inclination of the saw blade from 0 to 90 degrees either through push buttons or preset angles. 2) Software that enables generation of simple profiles on small blocks using the diamond saw blade. 3) A hydraulic tilting worktable that can rotate and tilt the work surface for loading slabs upright. 4) Various other accessories like a counter table, worktables with rollers, a second worktable, barcode readers, an optoelectronic drawing copier, and more.

1. Speedycut FK/NC 800
Accessories
FKIMMCM Push-button controlled, motorized inclination
of the saw blade from 0° to 90°
This accessory makes it possible to incline
the saw blade actuating two push-buttons
of the portable button panel. The
inclination angle is visualized on the
touch-screen monitor featuring with large
letters readable from afar. The spindle is
locked in the correct position through a
manual mechanical lever.
N.B. It is not possible to program
different inclinations for the various sides
of the same piece.

2. Speedycut FK/NC 800
Accessories
FKIMM Motorized inclination of the saw blade from 0° to 90°
This accessory makes it possible to incline
the saw blade presetting the desired
cutting angle on the video terminal. It is
possible to cut a single piece
programming the cutting angle for each
individual side.
N.B. The cutting accuracy is strictly
connected to the flatness of the cutting
surface of the piece.

3. Speedycut FK/NC 800
Accessories
GESTSWFR01 Software package Mod. GEST/PROF for the
generation of simple profiles on small blocks
(installed on the machine)
This software expansion makes it possible to shape small blocks with "comb-type"
"comb-
process, either vertical or horizontal, using the diamond saw bl ade. The shape of the
blade.
profile to be produced is defined using a simplified CAD supplied with the machine, or
supplied
it may be imported (DXF) from
another computer. Both the form of
the small blocks to be shaped and
the machining are displayed on the
machine monitor. The interpolated
axes of the machine enable to
obtain surfaces which can be even
very elaborate. The different profiles
can be stored in a database and
recalled at will.

4. Speedycut FK/NC 800
Accessories
FEBBS Hydraulic tilting worktable
with motorized, programmable rotation. The table can be positioned and
pneumatically locked from 0° to 360° and can tilt from 0° to 80° so that slabs can be
loaded upright. When the table tilts, the loading capacity is 1.500 kg. Using this
accessory, the counter-table is no longer needed. The wood-panelling of the
worktable is included in the supply.
Tilting worktable dimensions: 3.500x1.800 mm.

5. Speedycut FK/NC 800
Accessories
1BF203502 Counter-table Mod. 1BF/20-35
Wood-panelled counter-table to be placed on the bridge saw worktable in order to
load the slabs arranged in a pile while the machine is operating. It is advisable to
purchase two counter-tables (when purchasing them, the worktable of the machine is
supplied without wood-panelling).

6. Speedycut FK/NC 800
Accessories
FKBROPA01 Worktable with free-moving omnidirectional rollers
(replacing the standard worktable)
Worktable equipped with a large quantity of rollers (90) so as to enable the manual
handling of small pieces as well. Rollers are positioned on ten transversal rows
featuring a distance between centres of 400 mm and are installed on a structure
provided with pneumatic lifting which has a max. capacity of 600 kg.
Note: The operator’s physical strength is sufficient for slabs weighing up to 400 kg; for
slabs weighing over 400 kg, a pusher is needed.
N.B. This accessory does not allow to use the worktable with tilting top

7. Speedycut FK/NC 800
Accessories
FRGMSA00 Second worktable conforming to CE standards
(same as the standard table) made from arc-
welded steel and provided with shelves and
motorized rotation driven by an inverter-
controlled motor. The table can be
pneumatically locked in any position. The
supply includes an additional set of bridge
guide runners, the extension of the bridge
cable-holding chain and the other components
required for working with the double table.
(Planarity tolerance of the worktop: ± 1 mm)

8. Speedycut FK/NC 800
Accessories
SADBC Bar code manual reader
with automatic transmission of the working program to the machine .

9. Speedycut FK/NC 800
Accessories
FECOP1A00 Optoelectronic copying device of drawings
This accessory allows to sense a drawing which is then stored by the NC
and can be used time and again.

10. Speedycut FK/NC 800
Accessories
FKBNR Worktable
Worktable consisting of a support
column and an arc-welded steel bench
on which the milled worktop for the
belt sliding is machined. The
worktable rotates on a thrust
block/bearing. The movement is
controlled by an inverter-controlled
gearmotor.
The worktable can be pneumatically
locked in any position from 0° to
±180°.

11. Speedycut FK/NC 800
Accessories
STIJ Printer of labels with bar code
Printer of labels with bar code, linked
with the computer numerical control
(CNC) of the machines.
Labels are to be manually glued on the
pieces.

12. Speedycut FK/NC 800
Accessories
STPCST PC station + printer of labels with bar code
The PC, with the colour monitor and printer, is housed in a sheet metal cabinet,
while the keyboard and mouse are placed on the bolster, under the monitor. Labels
must be glued manually to the pieces

13. Speedycut FK/NC 800
Accessories
FOTO2035 Slab scanning system with digital camera
The system includes hardware and software for the scanning of the slab image
which is displayed on the 15-inch touch-screen colour video. The operator marks
the slab outline and the contour of any possible surface defect with the mouse. So
defined profile and defects will be the basis for both the optimization of the slab and
the programming of cuts while the machine is working. The digital camera is
installed on a special support.
N.B. The "slab support top" accessory must be purchased if there is no conveyor
supporting the slab.
N.B. In order to create the ideal environment
for taking digital photographs, the
arrangement of the correct light
intensity in the area of the
camera, the removal of any
possible luminous interference
as well as the removal of all
patches of shade and
environmental reflections,
shall be at the customer’s
care and expense.

14. Speedycut FK/NC 800
Accessories
FKPAIL Inclined slab support top
Inclined slab support top, outside the machine

15. Speedycut FK/NC 800
Accessories
OFFMACCAM Software licence to be installed on a PC of the
customer
linked with the machine
through Ethernet net; this
software enables the
drawing, the import of
pieces to be realized from
DXF format, the automatic
optimization of the piece
positioning inside the slabs
to be machined (which are
sensed by the operator
using the FOTO2035
accessory, not included in
the price) and the
realization of the relevant
production programs.

16. Speedycut FK/NC 800
Accessories
FKSPACC Pair of lateral steel shoulders
for the sliding of the spindle-holding beam,
replacing the concrete walls (for machine
without foundations).
N.B. This solution involves the construction of
a concrete slab (including slopes for water
collection, cable ducts and support basement
suitable for the anchoring of both the
shoulders and the table) to be built according
to Breton’s specifications.