Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
PRODUCT CATALOG
BETTER PARTS		 BETTER PROFITS
DURMA
800 FORM911 (367-4911) | DURMAUSA.COM
HD-F/L SERIES LASERS
DURMA
STANDARD EQUIPMENT
ƒƒ Siemens 840D CNC Controller
ƒƒ Laser source (Resonator)
ƒƒ High pressure ...
HD-F/L SERIES LASERS SPECIFICATIONS
DURMA
SIEMENS RACK & PINION
MOTION SYSTEM
SIEMENS LINEAR MOTION SYSTEM
(OPTIONAL)
SIEM...
HD/L SERIES LASERS
DURMA
STANDARD EQUIPMENT
ƒƒ Siemens 840D CNC Controller
ƒƒ CadCam Software
ƒƒ Laser source (Resonator)
...
HD/L SERIES LASERS SPECIFICATIONS
DURMA
Dynamics Unit Rack & Pinion Linear Rack & Pinion Linear Rack & Pinion Linear Rack ...
PL & PL-C SERIES PLASMA
DURMA
STANDARD EQUIPMENT
ƒƒ Independent Zoned & Partitioned
Table
ƒƒ Hypertherm Automatic Gas Cons...
PL SERIES PLASMA PRODUCT HIGHLIGHTS
DURMA
HYPERTHERM POWER SOURCE
ZONED & PARTITIONED TABLE EXHAUST
CADCAM NESTING SOFTWAR...
TP SERIES TURRET PUNCH
DURMA
STANDARD EQUIPMENT
ƒƒ Siemens 840Dsl CNC Control
ƒƒ Up to Six Indexable Multi-Tool
Stations
ƒ...
TP SERIES TURRET PUNCH SPECIFICATIONS
DURMA
TP Series Unit TP6 TP9 TP63 TP93 TP123 TPL63 TPL93
Maximum Tonnage U.S. ton 33...
AD-R SERIES PRESS BRAKES
DURMA
STANDARD EQUIPMENT
ƒƒ Y1, Y2 Servo Ram Positioning	
ƒƒ X Axis Back Gauge with Fingertip Lat...
AD-R SERIES PRESS BRAKES SPECIFICATIONS
DURMA
QUICKSET FRONT SHEET SUPPORTSUNIVERSAL BOX FORMING STYLE
PUNCH CLAMPS
R-AXIS...
AD-S SERIES PRESS BRAKES
DURMA
STANDARD EQUIPMENT
ƒƒ Large Stroke - Daylight - Throat
ƒƒ Y1, Y2 Ram Positioning	
ƒƒ Delem ...
AD-S SERIES PRESS BRAKES SPECIFICATIONS
DURMA
SHIMLESS BENDING LARGE STROKE & DAYLIGHTCNC SHEET FOLLOWERS
12 20 20 25 30 3...
AD-H SERIES PRESS BRAKES
DURMA
STANDARD EQUIPMENT
ƒƒ Energy Savings
ƒƒ 62% During Idle
ƒƒ 44% During Cycle
ƒƒ Lower Per Pa...
AD-H SERIES PRESS BRAKES SPECIFICATIONS
DURMA
SHIMLESS BENDING LARGE STROKE & DAYLIGHTCNC SHEET FOLLOWERS (OPTIONAL)
25 30...
ADSL LARGE FORMAT PRESS BRAKES
FEATURES
ƒƒ Unique Box Frame Construction (Dependent Tons, Stroke, Daylight & Gap)
ƒƒ Stres...
DURMA
DUMP TRUCK PRODUCTION
ADSL SERIES PRESS BRAKES SPECIFICATIONS
POLE MANUFACTURER ROAD BARRIER INDUSTRY
ADSL Large For...
VS SERIES SHEARS
DURMA
STANDARD EQUIPMENT
ƒƒ User-Friendly CNC
Touchscreen Control
ƒƒ Flexibility for Thick/Thin,
Narrow/W...
VS SERIES SHEARS SPECIFICATIONS
DURMA
3006 3010 3013 3016 3020 4006 4013 4016
in 121 121 121 121 121 121 121 121
MS in 0.2...
SBT SERIES SHEARS
DURMA
STANDARD EQUIPMENT
ƒƒ Touch Screen Control
ƒƒ Programmable Back Gauge
Positions
ƒƒ Program Storage...
SBT SERIES SHEAR SPECIFICATIONS
DURMA
Model 3006 3010 3013 3016 3020 4006 4013
Cutting Length (A) inch 122 122 122 122 122...
MS SERIES MECHANICAL SHEARS
DURMA
STANDARD EQUIPMENT
ƒƒ DT7 Touchscreen Control (10 Gauge)
ƒƒ 40” Squaring Arm with T-Slot...
MS SERIES MECHANICAL SHEARS SPECIFICATIONS
DURMA
MS Series Unit 1303 2003 2525 2005 2504 3004
Cutting Capacity inch 0.12 0...
MRB SERIES PLATE ROLLS
DURMA
STANDARD EQUIPMENT
ƒƒ Conical Bending
ƒƒ Top & Bottom Rolls Gear Driven
ƒƒ Motorized Back Rol...
MRB SERIES PLATE ROLLS SPECIFICATIONS
DURMA
MRB-S Series 1506 2005 2006 2007 2503 2504 2506 2508 3004 3006
Bending Length ...
HRB4 SERIES PLATE ROLLS
DURMA
STANDARD EQUIPMENT
ƒƒ Control Unit with DROs
ƒƒ Conical Bending
ƒƒ Bearing Seated Rolls
ƒƒ S...
HRB4 SERIES PLATE ROLLS SPECIFICATIONS
DURMA
ødx1.5 ødx3 ødx5
HRB 4 Series
Bending
Leight
Pre-
Bending
Capacities
Bending
...
HRB3 SERIES PLATE ROLLS
DURMA
CAPACITIES
ƒƒ Bend Length 8 - 13’
ƒƒ Bend Thickness 1/4” - 1”
STANDARD EQUIPMENT
ƒƒ Control ...
HRB3 SERIES PLATE ROLLS SPECIFICATIONS
DURMA
Specifications are approximate and subject to change without notice.
ødx1.5 ø...
HB SERIES BANDSAWS
DURMA
STANDARD EQUIPMENT
ƒƒ Hydraulic Vice
ƒƒ Electronic Variable Cutting Speed Adjustment with Inverte...
DCB SERIES BANDSAWS
DURMA
ƒƒ Two-way 45° Angle
Adjustable Clamp
ƒƒ Hydraulic Vice
ƒƒ Electronic Variable Cutting Speed
Adj...
IW SERIES IRONWORKERS
DURMA
STANDARD EQUIPMENT
ƒƒ Swing Away Stripper
ƒƒ Punching Station
ƒƒ Section Cutting
ƒƒ Angle Cutt...
IW SERIES IRONWORKERS SPECIFICATIONS
DURMA
Triangular Notch (Thickness) Inch 0.19 0.19 0.25 0.25 0.25 0.25 0.25 0.25
Trian...
FN & VN SERIES VARIABLE ANGLE NOTCHERS
DURMA
STANDARD EQUIPMENT
ƒƒ 30-140° Quickset Adjustment of Notch Angle (VN Series O...
DURMA AIMS FOR CONTINUOUS DEVELOPMENT
DURMA’s large investment in machining centers and production equipment, as well as i...
© ALL RIGHTS RESERVED
VERSION 13.0206DURMA
Upcoming SlideShare
Loading in …5
×

DURMA General catalog.

537 views

Published on

Br,
Ahmed Khalid
Area Sales Manager
Al SAIF Machinery TRD . DURMA Partner
+971 55 499 3270
+971 50 567 8850
Email : ahmed.khalid@durmagcc.com
Skype : ahmed_khalid18

Published in: Engineering
  • Be the first to comment

  • Be the first to like this

DURMA General catalog.

  1. 1. PRODUCT CATALOG BETTER PARTS BETTER PROFITS DURMA 800 FORM911 (367-4911) | DURMAUSA.COM
  2. 2. HD-F/L SERIES LASERS DURMA STANDARD EQUIPMENT ƒƒ Siemens 840D CNC Controller ƒƒ Laser source (Resonator) ƒƒ High pressure cutting option (25 Bar) ƒƒ Central lubrication ƒƒ Tropical Level Cooling unit ƒƒ Scrap collector ƒƒ Automatic pallet changer (manual on Smart Series) ƒƒ Filter ƒƒ Special laser cutting options ƒƒ Sharp corner overheat protection (Speed-Power modulation) ƒƒ Fast follow property of the head for high precision ƒƒ Simple user interface parameter page (Power-speed-pressure combination) ƒƒ Sheet identification and detection system (Ref. Point) ƒƒ Two Cutting Heads: 5’’, 7,5’’ ƒƒ Exchangeable Lens Holder System for Different Focal lengths (1,5’’ lens) ƒƒ Under Table Small Part & Scrap Conveyor ƒƒ Dust Collection Filtration OPTIONAL EQUIPMENT ƒƒ 3 & 4 kw IPG Fiber Resonators ƒƒ Transverse Mounted Scrap Conveyor ƒƒ Automation ƒƒ Siemens Linear Motion System ƒƒ CadCam Software CAPACITIES ƒƒ 5’ x 10’ ƒƒ 6’6” x 13’ ƒƒ 6’6” x 20’ ƒƒ 8’ x 40’ ƒƒ Larger sizes upon request ƒƒ 2, 3 & 4 kw HD 3015 SMART SERIES ƒƒ 5’ x 10’ ƒƒ 1 kw or 2 kw IPG Fiber ƒƒ Manual Pallet Exchange
  3. 3. HD-F/L SERIES LASERS SPECIFICATIONS DURMA SIEMENS RACK & PINION MOTION SYSTEM SIEMENS LINEAR MOTION SYSTEM (OPTIONAL) SIEMENS 840D SERIES CONTROL IPG FIBER RESONATOR Dynamics Unit Rack & Pinion Linear Rack & Pinion Linear Rack & Pinion Linear X Axis ipm 3374 6947 3374 6947 3374 6947 Y Axis ipm 3970 6947 3970 6947 3970 6947 Synchronous (X+Y) ipm 5200 9945 5200 9945 5200 9945 Acceleration (starting) 39"/s^2 2G 3G 2G 3G 2G 3G Positional Accuracy in ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002 Repeatability in ± 0.002 ± 0.001 ± 0.002 ± 0.001 ± 0.002 ± 0.001 X Axis in 120 120 157.5 157.5 240 240 Y Axis in 59 59 78.7 78.7 80 80 Z Axis in 3.1 3.1 3.1 3.1 3.1 3.1 Max Sheet Size in 120x60 120x60 157.5x78.7 157.5x78.7 236.2x78.7 236.2x78.7 Max Sheet Weight lb 2756 2756 3307 3307 5291 5291 Precitec 1.5" Lens (Kartridge system) 5", 7.5" (Optional 10") PrecitecType 5", 7.5" (Optional 10")Focal Lengths Laser Cutting Lengths 1.5" Lens (Kartridge system) Precitec 1.5" Lens (Kartridge system) 5", 7.5" (Optional 10") Filter HD-F/L 3015 HD-F/L4020 HD-F/L6020 Cutting Axes Cutting Head HD Series COMPACT AUTOMATION INTELLIGENT AUTO FOCUS CUTTING HEAD AUTOMATIC SHUTTLE TABLE EFFICIENT BEAM PATH FLYING OPTICS CONCEPT
  4. 4. HD/L SERIES LASERS DURMA STANDARD EQUIPMENT ƒƒ Siemens 840D CNC Controller ƒƒ CadCam Software ƒƒ Laser source (Resonator) ƒƒ High pressure cutting option (25 Bar) ƒƒ Central lubrication ƒƒ Tropical Level Cooling unit ƒƒ Scrap collector ƒƒ Shuttle table (Automatic pallet changer) ƒƒ Filter ƒƒ Special laser cutting options ƒƒ Sharp corner overheat protection (Speed-Power modulation) ƒƒ Fast follow property of the head for high precision ƒƒ Simple user interface parameter page (Power-speed-pressure combination) ƒƒ Sheet identification and detection system (Ref. Point) ƒƒ Two Cutting Heads: 5’’, 7,5’’ ƒƒ Exchangeable Lens Holder System for Different Focal lengths (1,5’’ lens) ƒƒ Under Table Small Part & Scrap Conveyor OPTIONAL EQUIPMENT ƒƒ Dust Collection Filtration ƒƒ 3-4-5-7 kw PRC Resonator ƒƒ Transverse Mounted Scrap Conveyor ƒƒ Automation ƒƒ Siemens Linear Motion System CAPACITIES ƒƒ 5’ x 10’ ƒƒ 6’6” x 13’ ƒƒ 6’6” x 20’ ƒƒ 3, 4, 5 & 6 kw SIEMENS RACK & PINION MOTION SYSTEM SIEMENS LINEAR MOTION SYSTEM (OPTIONAL) SIEMENS 840D SERIES CONTROL
  5. 5. HD/L SERIES LASERS SPECIFICATIONS DURMA Dynamics Unit Rack & Pinion Linear Rack & Pinion Linear Rack & Pinion Linear Rack & Pinion Linear X Axis ft/min 3573 6947 3573 6947 3573 6947 3573 6947 Y Axis ft/min 3970 6947 3970 6947 3970 6947 3970 6947 Synchronous (X+Y) ft/min 5200 9925 5200 9925 5200 9925 5200 9925 Acceleration (starting) 39"/s^2 2G 3G 2G 3G 2G 3G 2G 3G Positional Accuracy in ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002 Repeatability in ± 0.002 ± 0.001 ± 0.002 ± 0.001 ± 0.002 ± 0.001 ± 0.002 ± 0.001 X Axis in 120 120 157.5 157.5 240 240 480 480 Y Axis in 59 59 78.7 78.7 80 80 120 120 Z Axis in 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 Max Sheet Size in 118x59 118x59 157.5x78.7 157.5x78.7 236.2x78.7 236.2x78.7 480x120 480x120 Max Sheet Weight lb 2756 2756 3307 3307 5291 5291 7900 7900 2xPCI; 1xCF Card 15" TFT Color Monitor Precitec 1.5" Lens (Kartridge system) Laser Cutting Head Expansion Slots Port Type Laser Cutting Lengths Precitec 1.5" Lens (Kartridge system) Precitec 1.5" Lens (Kartridge system) Precitec 1.5" Lens (Kartridge system) HD/L 3015 HD/L4020 HD/L6020 Control Unit Win XP pro, 2 GHz Intel Processor, 40GB HD HD/L 12030 Cutting Axes 6MB User RAM Memory 840D, NCU 573.5 6MB User RAM Memory Win XP pro, 2 GHz Intel Processor, 40GB HD HD Series 2xPCI; 1xCF Card 15" TFT Color Monitor Memory CNC PC:PCU50.3 Win XP pro, 2 GHz Intel Processor, 40GB HD 2xPCI; 1xCF Card 15" TFT Color Monitor 840D, NCU 573.5 15" TFT Color Monitor 840D, NCU 573.5 6MB User RAM Memory Win XP pro, 2 GHz Intel Processor, 40GB HD 2xPCI; 1xCF Card 6MB User RAM Memory 840D, NCU 573.5 FRAME MOUNTED RESONATOR COMPACT AUTOMATION INTELLIGENT AUTO FOCUS CUTTING HEAD AUTOMATIC SHUTTLE TABLE EFFICIENT BEAM PATH FLYING OPTICS CONCEPT
  6. 6. PL & PL-C SERIES PLASMA DURMA STANDARD EQUIPMENT ƒƒ Independent Zoned & Partitioned Table ƒƒ Hypertherm Automatic Gas Console ƒƒ Siemens AC Digital Servo Motors ƒƒ Rack & Pinion/Linear Drive System ƒƒ + - .004 Positioning Accuracy ƒƒ 1,389 IPM Positioning ƒƒ Laser Locator (auto plate position locator) ƒƒ Remote Diagnostics via Ethernet Connection ƒƒ HPR 130xd ƒƒ Break Away Torch Head ƒƒ Stress Relieved Frame ƒƒ Marking System ƒƒ AC Digital Servomotors ƒƒ Speed Control Device ƒƒ Plasma Ignition Console PL CAPACITIES ƒƒ 5’ - 20’ widths ƒƒ 10’ - 125’ lengths ƒƒ Custom sizes upon request PL-C CAPACITIES ƒƒ 5’ and 6’ Widths ƒƒ 10’ – 13’ – 20’ Lengths
  7. 7. PL SERIES PLASMA PRODUCT HIGHLIGHTS DURMA HYPERTHERM POWER SOURCE ZONED & PARTITIONED TABLE EXHAUST CADCAM NESTING SOFTWARE SIX STATION MACHINING HEAD SIEMENS 840D SERIES CONTROL BEVELING HEAD PLASMA AUTOMATION & LARGE FORMAT CUTTING
  8. 8. TP SERIES TURRET PUNCH DURMA STANDARD EQUIPMENT ƒƒ Siemens 840Dsl CNC Control ƒƒ Up to Six Indexable Multi-Tool Stations ƒƒ Remote Diagnostic via Ethernet ƒƒ Network via Ethernet ƒƒ Automatic Clamp Positioning ƒƒ Automatic Tool Lubrication ƒƒ Alignment Tool ƒƒ USB Port ƒƒ Auto Sheet X Axis Repositioning ƒƒ Oil Cooler ƒƒ Brush Table ƒƒ Work Chute OPTIONAL EQUIPMENT ƒƒ Load/Unload Systems ƒƒ Indexable Multi-Tool ƒƒ Tool Holders ƒƒ CAD/CAM Nesting Software ƒƒ Wheel Programming Software ƒƒ Parts Chute CAPACITIES ƒƒ 49” x 78” x 22/33 Tons ƒƒ 49” x 100” x 22/33 Tons ƒƒ 60” x 120” x 22/33 Tons STRESS-RELIEVED BRIDGE FRAME CONSTRUCTION SIEMENS AC SERVO DIRECT DRIVE MOTION SYSTEM SIEMENS 840 DSI CONTROL
  9. 9. TP SERIES TURRET PUNCH SPECIFICATIONS DURMA TP Series Unit TP6 TP9 TP63 TP93 TP123 TPL63 TPL93 Maximum Tonnage U.S. ton 33 22 33 22 22 33 22 X Axis Movement inch 78 + R 78 + R 98 + R 98 + R 96 + R 118 + R 118 + R Y Axis Movement with Single Tool inch 49.2 49.2 49.2 49.2 49.2 59.1 59.1 Automatic Repositioning Range * inch 393 393 393 393 393 393 393 Y Axis Speed ipm 2.7 2.8 2.8 2.8 3.1 2.7 2.8 X Axis Speed ipm 3 3.5 3 3.5 3.8 3 3.5 Lateral Speed Y + X ipm 3.5 4.5 3.5 4.5 4.9 3.5 4.5 Max Hit Rate (1mm pitch, 1mm thickness) hpm 600 900 600 900 1200 600 900 Max Hit Rate (25mm pitch, 1mm thickness) hpm 300 350 250 300 400 300 300 Max Hit Rate: Marking hpm 850 1200 900 1200 1800 850 1200 Main Cylinder Stroke inch 1.6 1.6 1.6 1.6 1.6 1.6 1.6 Maximum Punching Stroke inch 1 1 1 1 1 1 1 Max Cutting Thickness: Mild Steel mm 6 6 6 6 6 6 6 Max Cutting Thickness: Stainless Steel mm 6 6 6 6 6 6 6 Positioning Accuracy inch ±.004 ±.004 ±.004 ±.004 ±.004 ±.004 ±.004 Repeatable Accuracy inch ±.002 ±.002 ±.002 ±.002 ±.002 ±.002 ±.002 Turret Rotation Speed rpm 30 30 22 22 22 22 22 Auto Index Rotational Speed rpm 150 150 150 150 150 150 150 Max Weight of Sheet lbs 220 265 265 265 265 441 441 Height inch 98.4 98.4 98.4 98.4 90.9 90.9 90.9 Width (without light barrier) inch 166.0 166.0 1170 / 211 170 / 211 169.0 248.0 248.0 Width (with light barrier) inch 244.0 244.0 247 / 286 247 / 286 247.0 327.0 327.0 Length (without light barrier) inch 205.0 236.0 227.0 227.0 189.0 262.0 262.0 Length (with light barrier) inch 244.0 276.0 268.0 268.0 229.0 302.0 302.0 Table Height inch 37.0 37.0 37.0 37.0 37.0 37.0 37.0 Approx. Weight lbs 27558 27558 27558 27558 30424 42990 42990 Motor kw 11 7.5 11 7.5 15 11 7.5 Oil Tank lt 180 200 180 180 180 200 200 No. of Clamps 2 2 3 3 3 4 4 Machine Dimensions * Special table must be added to the machine, and the light barriers must be located at the correct position. Max weight 220 pounds. Specifications are approximate and subject to change without notice. AUTOMATIC SHEET CLAMP POSITION AUTOMATION PROGRAMMABLE WORK CHUTE (OPTIONAL) MANUAL NESTING INDEXABLE MULTI-TOOLS (EXCEPT TP 6 & 9)
  10. 10. AD-R SERIES PRESS BRAKES DURMA STANDARD EQUIPMENT ƒƒ Y1, Y2 Servo Ram Positioning ƒƒ X Axis Back Gauge with Fingertip Lateral Adjustment ƒƒ Delem DA 52 Angle Programming Control ƒƒ Quickset Front Sheet Supports via Linear Guide ƒƒ Universal Wedge Style Punch Clamp for American or Euro Style Punches OPTIONAL EQUIPMENT ƒƒ R Axis Back Gauge ƒƒ Manual Table Crowning ƒƒ Automatic Table Crowning ƒƒ Delem DA 56 Graphical Control ƒƒ Quick Release Punch Clamping ƒƒ Akas Ram Mounted Laser Operational Guarding ƒƒ Additional Finger Blocks ƒƒ 39” Back Gauge ƒƒ Hydraulic Tool Clamping ƒƒ Tooling DA 52 CONTROL 2D GRAPHICAL CONTROL (OPTIONAL) SHIMLESS BENDING (OPTIONAL)
  11. 11. AD-R SERIES PRESS BRAKES SPECIFICATIONS DURMA QUICKSET FRONT SHEET SUPPORTSUNIVERSAL BOX FORMING STYLE PUNCH CLAMPS R-AXIS PROGRAMMABLE BACK GAUGE HEIGHT 12 20 20 25 30 30 30 37 14 30 37 43 R Series Model 40 40 66 100 100 135 175 175 175 220 220 220 Bending force U.S. ton 44 44 66 110 110 150 195 195 195 245 245 245 Bending length inch 49 80 80 100 120 120 120 145 168 120 145 168 Between columns inch 41 67 67 86 102 102 102 122 146``` 102 122 146 Daylight inch 17 17 21 21 21 21 21 21 21 21 21 21 Stroke inch 6 6 10 10 10 10 10 10 10 10 10 10 Throat depth inch 14 14 16 16 16 16 16 16 16 16 16 16 X Axis Speed ipm 590 590 590 590 590 590 590 590 590 5900 590 590 X Axis Travel inch 19.7 19.7 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25. Weight (approx) pounds 7,040 7716 12897 19070 20393 22597 24802 28600 29842 27007 31592 3251 12 20 20 25 30 30 30 37 14 30 37 43 R Series Model 40 40 66 100 100 135 175 175 175 220 220 220 Bending force U.S. ton 44 44 66 110 110 150 195 195 195 245 245 245 Bending length inch 49 80 80 100 120 120 120 145 168 120 145 168 Between columns inch 41 67 67 86 102 102 102 122 146``` 102 122 146 Daylight inch 17 17 21 21 21 21 21 21 21 21 21 21 Stroke inch 6 6 10 10 10 10 10 10 10 10 10 10 Throat depth inch 14 14 16 16 16 16 16 16 16 16 16 16 X Axis Speed ipm 590 590 590 590 590 590 590 590 590 5900 590 590 X Axis Travel inch 19.7 19.7 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 Weight (approx) pounds 7,040 7716 12897 19070 20393 22597 24802 28600 29842 27007 31592 32518 30 30 37 14 30 37 43 30 40 43 40 43 60 60 60 0 135 175 175 175 220 220 220 320 320 320 400 400 220 320 400 150 195 195 195 245 245 245 350 350 350 440 440 245 350 440 120 120 145 168 120 145 168 120 159 168 159 168 240 240 240 102 102 122 146``` 102 122 146 102 141 146 134 146 200 200 200 21 21 21 21 21 21 21 25 25 25 25 25 21 25 25 10 10 10 10 10 10 10 10 14 14 14 14 10 14 14 16 16 16 16 16 16 16 16 16 16 20 20 16 16 20 590 590 590 590 5900 590 590 590 590 590 590 590 590 590 590 6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 29.5 29.5 29.5 29.5 29.5 3 22597 24802 28600 29842 27007 31592 32518 38030 45746 47643 58974 59873 45393 62281 78815
  12. 12. AD-S SERIES PRESS BRAKES DURMA STANDARD EQUIPMENT ƒƒ Large Stroke - Daylight - Throat ƒƒ Y1, Y2 Ram Positioning ƒƒ Delem DA 66 Graphic Control ƒƒ Euro/American Style Punch Clamp ƒƒ X/R Back Gauge ƒƒ Quickset Sliding Front Sheet Support ƒƒ Automatic Table Crowning ƒƒ Rear Work Light ƒƒ Side and Rear Safety Doors OPTIONAL EQUIPMENT ƒƒ Up to Six Axis Back Gauge ƒƒ Laser Style Angle Measuring System ƒƒ CNC Controlled Sheet Followers ƒƒ CNC Controlled Die Shuttle Systems ƒƒ 3D Controller ƒƒ 2D & 3D Programming Software ƒƒ Operational Laser Guarding 15” TOUCHSCREEN CONTROL UP TO SIX AXIS BACK GAUGINGHYDRAULIC TOOL CLAMPING
  13. 13. AD-S SERIES PRESS BRAKES SPECIFICATIONS DURMA SHIMLESS BENDING LARGE STROKE & DAYLIGHTCNC SHEET FOLLOWERS 12 20 20 25 30 30 30 30 30 37 37 43 40 40 43 40 43 40 S Series Model 40 40 66 100 100 135 175 220 320 175 220 175 175 220 220 320 320 400 Tons US Tons 44 44 66 110 110 150 195 245 350 195 245 195 195 245 245 350 350 440 Bend Length inch 49 80 81 100 120 120 120 120 120 145 145 168 159 159 168 159 168 159 Between Columns inch 41 67 67 86 102 102 102 102 102 122 122 146 141 141 146 141 146 141 Open Ht(bed to ram) inch 15 15 21 21 21 21 21 21 21 21 21 21 21 21 21 25 25 25 Stroke (Std/Opt) inch 14 14 10 10 10 10 10 10 10 10 10 16 10 10 16 14 16 14 Throat Depth inch 14 14 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 X Axis Speed ipm 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 X Axis Travel inch 20 20 26 26 26 26 26 26 26 26 26 25 26 26 30 26 50 30 R Axis Speed ipm 827 827 827 827 827 827 827 827 827 827 827 827 827 827 827 827 708 708 R-Axis Travel inch 6 6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Approx Weight lbs 7040 7716 13448 19621 20944 23149 25353 27558 25353 28660 31658 29842 28881 33069 32518 46297 47643 59524 30 37 37 43 40 40 43 40 43 40 320 175 220 175 175 220 220 320 320 400 350 195 245 195 195 245 245 350 350 440 120 145 145 168 159 159 168 159 168 159 102 122 122 146 141 141 146 141 146 141 21 21 21 21 21 21 21 25 25 25 10 10 10 16 10 10 16 14 16 14 16 16 16 16 16 16 16 16 16 20 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 26 26 26 25 26 26 30 26 50 30 827 827 827 827 827 827 827 827 708 708 10 10 10 10 10 10 10 10 10 10 5353 28660 31658 29842 28881 33069 32518 46297 47643 59524 60 60 60 60 60 70 70 70 80 80 80 80 80 S Series Model 220 320 400 600 800 800 1000 1250 800 1000 1250 1600 2000 Tons US Tons 245 350 440 660 880 880 1100 1375 880 1100 1375 1760 2200 Bend Length inch 238 238 238 238 238 277 277 277 317 317 317 318 318 Between Columns inch 200 200 200 200 200 200 200 200 252 252 252 252 252 Open Ht. (bed to ram) inch 28 21 25 28 28 28 32 32 28 32 32 39 39 Stroke (Std/Opt) inch 14 10 14 14 16 16 20 24 14 16 16 24 24 Throat Depth inch 20 16 20 20 24 24 24 24 24 24 24 24 30 X Axis Speed ipm 1181 1181 827 827 827 827 708 708 708 708 708 708 708 X Axis Travel inch 30 30 30 30 30 30 39 39 30 39 39 39 49 R Axis Speed inch / sec 12 12 12 12 12 12 10 10 12 10 10 10 10 R-Axis Travel inch 10 10 10 10 10 10 10 10 10 10 10 10 10 Approx Weight lbs 89287 45944 79366 119050 158733 175268 210541 242509 187392 224872 297624 359354 548941 12 20 20 25 30 30 30 30 30 37 37 43 40 40 43 40 43 40 S Series Model 40 40 66 100 100 135 175 220 320 175 220 175 175 220 220 320 320 400 Tons US Tons 44 44 66 110 110 150 195 245 350 195 245 195 195 245 245 350 350 440 Bend Length inch 49 80 81 100 120 120 120 120 120 145 145 168 159 159 168 159 168 159 Between Columns inch 41 67 67 86 102 102 102 102 102 122 122 146 141 141 146 141 146 141 Open Ht(bed to ram) inch 15 15 21 21 21 21 21 21 21 21 21 21 21 21 21 25 25 25 Stroke (Std/Opt) inch 14 14 10 10 10 10 10 10 10 10 10 16 10 10 16 14 16 14 Throat Depth inch 14 14 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 X Axis Speed ipm 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 X Axis Travel inch 20 20 26 26 26 26 26 26 26 26 26 25 26 26 30 26 50 30 R Axis Speed ipm 827 827 827 827 827 827 827 827 827 827 827 827 827 827 827 827 708 708 R-Axis Travel inch 6 6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Approx Weight lbs 7040 7716 13448 19621 20944 23149 25353 27558 25353 28660 31658 29842 28881 33069 32518 46297 47643 59524
  14. 14. AD-H SERIES PRESS BRAKES DURMA STANDARD EQUIPMENT ƒƒ Energy Savings ƒƒ 62% During Idle ƒƒ 44% During Cycle ƒƒ Lower Per Part Cost ƒƒ Silent Operation ƒƒ Increased Ram Speeds ƒƒ Better Accuracy ƒƒ Smoother Ram Positioning at High Speeds ƒƒ Less Oil Requirement OPTIONAL EQUIPMENT ƒƒ Robotics ƒƒ Up to Six Axis Back Gauge ƒƒ Laser Style Angle Measuring System ƒƒ CNC Controlled Sheet Followers ƒƒ CNC Controlled Die Shuttle Systems ƒƒ 3D Controller 2D & 3D Programming Software ƒƒ Operational Laser Guarding CAPACITIES ƒƒ 8’ & 10’ Lengths ƒƒ 110 - 150 - 195 Tons 15” TOUCHSCREEN CONTROL UP TO SIX AXIS BACK GAUGINGELECTRO HYDRAULIC OPERATION
  15. 15. AD-H SERIES PRESS BRAKES SPECIFICATIONS DURMA SHIMLESS BENDING LARGE STROKE & DAYLIGHTCNC SHEET FOLLOWERS (OPTIONAL) 25 30 30 30 Model 100 100 135 175 Tons US Tons 112 112 151 196 Bend Length inch 100 120 120 120 Between Columns inch 86 102 102 102 Open Ht(bed to ram) inch 21 / 25 21 / 25 21 / 25 21 / 25 Stroke (Std/Opt) inch 10 / 14 10 / 14 10.4 10 / 14 Throat Depth inch 16 16 16 16 X Axis Speed ipm 1181 1181 1181 1181 X Axis Travel inch 26 26 26 26 R Axis Speed ipm 827 827 827 827 R-Axis Travel inch 10 10 10 10 Approx Weight lbs 19621 20944 23149 25353 Specifications Conventional Press Brakes SvP Press Brakes Motor Power (HP) 20 2 x 5 Hydraulic Oil Capacity (gallons) 53 2 x 11 Noise Level (dB(A)) 76 63 Total Energy per Cycle (kWh) 0.034 0.019 Standby Power (kw/hr) 1.85 0.7 Rapid Approach Speed (ipm) 230 to 280 472 Return Speed Beam (ipm) 210 250 425
  16. 16. ADSL LARGE FORMAT PRESS BRAKES FEATURES ƒƒ Unique Box Frame Construction (Dependent Tons, Stroke, Daylight & Gap) ƒƒ Stress Relieved Frame ƒƒ Large Gaps-Strokes-Daylight Openings ƒƒ Special Reinforcements for Heavy Center Loads ƒƒ Over a Small Area ƒƒ Special Front and Back Feed Systems for the ƒƒ Pole Manufacturing Industries ƒƒ Automatic Table Crowning ƒƒ Programmable V Openings ƒƒ Tandem & Trio Systems ƒƒ Automatic Blank Loading ƒƒ Automatic Part Discharge STANDARD FEATURES ƒƒ Large Stroke-Daylight-Throat ƒƒ Y1,Y2 Ram Positioning ƒƒ Delem DA 66 Graphic Control ƒƒ Euro/American Style Punch Clamp ƒƒ X/R Back Gauge ƒƒ Quickset Sliding Front Sheet Support ƒƒ Automatic Table Crowning ƒƒ Rear Work Light ƒƒ Side and Rear Safety Doors CAPACITIES ƒƒ Lengths 13’ - 30’ + Tandem/Trio ƒƒ 660 - 3,300 Tons 15” TOUCHSCREEN CONTROL DURMA CNC FEED & GAUGE SYSTEMS POLE OR PART DISCHARGE DEVICE
  17. 17. DURMA DUMP TRUCK PRODUCTION ADSL SERIES PRESS BRAKES SPECIFICATIONS POLE MANUFACTURER ROAD BARRIER INDUSTRY ADSL Large Format Press Brakes Series 60 60 60 60 60 70 70 70 80 80 80 80 80 S Series Model 220 320 400 600 800 800 1000 1250 800 1000 1250 1600 2000 Tons US Tons 245 350 440 660 880 880 1100 1375 880 1100 1375 1760 2200 Bend Length ( A ) inch 238 238 238 238 238 277 277 277 317 317 317 318 318 Between Columns ( B ) inch 200 200 200 200 200 200 200 200 252 252 252 252 252 Y Rapid Speed ipm 236 236 236 189 189 189 165 165 189 165 165 165 165 Y Working Speed ipm 24 24 19 17 17 17 14 14 17 14 16 14 14 Y Return Speed ipm 236 236 189 189 165 165 165 165 165 165 168 168 144 Open Ht. (bed to ram) ( D ) inch 28 21 25 28 28 28 32 32 28 32 32 39 39 Table Width ( G ) inch 4 6 12 12 16 16 16 16 16 16 20 20 28 Table Height ( F ) inch 39 43 48 39 32 32 32 35 32 32 35 35 37 Stroke (Std/Opt) ( C ) inch 14 10 14 14 16 16 20 24 14 16 16 24 24 Throat Depth ( E ) inch 20 16 20 20 24 24 24 24 24 24 24 24 30 Support Arms qty 4 4 4 4 4 4 4 4 4 4 4 4 4 B.G.Fingers qty 4 4 4 4 4 4 4 4 6 6 6 6 6 X Axis Speed ipm 1181 1181 827 827 827 827 708 708 708 708 708 708 708 X Axis Travel inch 30 30 30 30 30 30 39 39 30 39 39 39 49 R Axis Speed inch / sec 12 12 12 12 12 12 10 10 12 10 10 10 10 R-Axis Travel inch 10 10 10 10 10 10 10 10 10 10 10 10 10 Main Motor HP 30 30 50 60 75 75 75 100 75 75 100 120 150 Oil Capacity gal 132 66 132 132 198 198 264 330 198 264 330 330 528 Length ( L ) inch 222 295 295 299 317 343 347 347 386 394 394 398 413 Width ( W ) inch 128 70 83 104 126 126 128 128 126 128 128 138 171 Height ( H ) inch 151 128 146 152 167 167 232 252 167 232 252 276 319 Approx Weight lbs 89287 45944 79366 119050 158733 175268 210541 242509 187392 224872 297624 359354 548941
  18. 18. VS SERIES SHEARS DURMA STANDARD EQUIPMENT ƒƒ User-Friendly CNC Touchscreen Control ƒƒ Flexibility for Thick/Thin, Narrow/Wide Sheets ƒƒ Automatic Swing-up Back Gauge ƒƒ T-slotted Sheet Support Arms ƒƒ Tabletop Ball Transfers ƒƒ CNC Front Feeding ƒƒ Support, Conveying & Stacking Systems ƒƒ Anti-Twist Device to Reduce Strip Distortion OPTIONAL EQUIPMENT ƒƒ Return to sender ƒƒ Automatic feeding ƒƒ Sheet support systems ƒƒ Conveyor systems CAPACITIES ƒƒ 1/4” - 1” ƒƒ 10’ - 30’ Lengths D-TOUCH 7 CONTROL REAR PNEUMATIC SHEET SUPPORTS REAR SIDE AUTOMATION
  19. 19. VS SERIES SHEARS SPECIFICATIONS DURMA 3006 3010 3013 3016 3020 4006 4013 4016 in 121 121 121 121 121 121 121 121 MS in 0.24 0.39 0.51 0.63 0.79 0.24 0.51 0.63 SS in 0.16 0.31 0.39 0.51 0.63 0.16 0.39 0.39 min 12 10 9 7 6 10 7 5 max 20 20 17 12 12 20 13 9 min 21 15 15 11 9 19 13 10 max 33 27 27 18 17 31 25 17 min 0°30' 0°30' 0°30' 0°30' 0°30' 0°30' 0°30' 0°30' max 2° 2° 2°30' 2°30' 2°30' 2° 2°30' 2°30' 16 16 17 14 14 20 20 17 min ton 4.4 4.4 8.0 11 17.0 4.0 10.0 50.0 max ton 22 22 40 55 83 20 48 100 min 1000 1000 1000 1000 1000 1000 1000 1000 ips 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 hp 15 30 40 60 60 15 40 60 gal 33 48 79 119 132 33 87 106 in 13.8 13.8 13.8 13.8 13.8 13.8 13.8 13.8 High speed stroke / min Cutting Angle Number of holddowns Throat depth Holddown force Back gauge course Back gauge speed Motor power Oil capacity VS Series Cutting Capacity Stroke per minute Cutting Length 4020 6006 6013 6016 6020 6025 8010 10013 in 121 239 239 239 239 240 319 398 MS in 0.79 0.24 0.51 0.63 0.79 1.00 0.39 0.51 SS in 0.63 0.16 0.31 0.39 0.51 0.79 0.24 0.31 min 4 6 5 4 3 3 3 3 max 8 10 10 10 6 6 6 6 min 8 - - - - - - - max 16 - - - - - - - min 0°30' 0°30' 0°30' 0°30' 0°30' 0°30' 0°30' 0°30' max 2°30' 2° 2°30' 2°30' 3°15' 3°25' 2° 2°12' 21 29 29 29 29 30 40 52 min ton 50.0 10 29 29 48 150 40 60 max ton 100 20 58 58 100 250 60 81 min 1000 1000 1000 1000 1000 1000 1000 1500 ips 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 hp 60 30 50 60 60 74 40 60 gal 132 53 106 145 185 198 145 172 in 13.8 13.8 13.8 13.8 13.8 13.8 19.7 29.5 High speed stroke / min Cutting Angle Holddown force Back gauge course Back gauge speed Motor power Oil capacity Throat depth VS Series Cutting Capacity Stroke per minute Number of holddowns Cutting Length Specifications are approximate and subject to change without notice. CNC CONTROLLED FRONT FEED SYSTEM FLIP-UP FINGER GUARDS & TABLETOP TRANSFERS LARGE GAP
  20. 20. SBT SERIES SHEARS DURMA STANDARD EQUIPMENT ƒƒ Touch Screen Control ƒƒ Programmable Back Gauge Positions ƒƒ Program Storage ƒƒ Programmable Stroke Length ƒƒ 39” High Speed Back Gauge ƒƒ Swing Away or Up Back Gauge Bar ƒƒ 60” Squaring Arm ƒƒ T-Slotted Support Arms with Disappearing Stops (2/10’ - 3/13’) ƒƒ Tabletop Ball Transfers ƒƒ Quickset Blade Clearance Setting OPTIONAL EQUIPMENT ƒƒ High Speed Package ƒƒ Rear Pneumatic Sheet Supports ƒƒ Conveying & Stacking Systems ƒƒ Protractor ƒƒ Longer Support & Squaring Arms CAPACITIES ƒƒ 1/4” to 3/4” ƒƒ 10’ and 13’ Lengths
  21. 21. SBT SERIES SHEAR SPECIFICATIONS DURMA Model 3006 3010 3013 3016 3020 4006 4013 Cutting Length (A) inch 122 122 122 122 122 161 161 MS inch .250 .375 .500 .625 .750 .250 .500 SS inch .157 .250 .314 .375 .500 .157 .314 Throat Depth (D) inch 2 2 2 2 2 2 2 Strokes - full length spm 17 15 15 11 7 13 9 Strokes -full length (high-speed option) spm 26 21 20 15 8 25 19 Cutting Angle degree 1°30' 1°30' 1°45' 2° 2° 1°30' 1°45' Holddowns 16 16 16 14 14 20 18 Holddown Force ton 15 24 41 67 85 19 68 Back Gauge Range inch 39.4 39.4 39.4 39.4 39.4 39.4 39.4 Back Gauge Power hp 1 1 1 1 1 1 1 Back Gauge Speed ipm 472 472 472 472 472 472 472 Motor Power hp 20 30 40 50 60 20 40 Oil Capacity U.S. gallon 52.8 52.8 87.2 108.3 118.9 52.8 87.2 Sheet Supports 2 2 2 2 2 3 3 Table Height (C) inch 34 34 34 33 35 34 33 SBT Series Cutting Capacity Model 3006 3010 3013 3016 3020 4006 4013 Cutting Length (A) inch 122 122 122 122 122 161 161 MS inch .250 .375 .500 .625 .750 .250 .500 SS inch .157 .250 .314 .375 .500 .157 .314 Throat Depth (D) inch 2 2 2 2 2 2 2 Strokes - full length spm 17 15 15 11 7 13 9 Strokes -full length (high-speed option) spm 26 21 20 15 8 25 19 Cutting Angle degree 1°30' 1°30' 1°45' 2° 2° 1°30' 1°45' Holddowns 16 16 16 14 14 20 18 Holddown Force ton 15 24 41 67 85 19 68 Back Gauge Range inch 39.4 39.4 39.4 39.4 39.4 39.4 39.4 Back Gauge Power hp 1 1 1 1 1 1 1 Back Gauge Speed ipm 472 472 472 472 472 472 472 Motor Power hp 20 30 40 50 60 20 40 Oil Capacity U.S. gallon 52.8 52.8 87.2 108.3 118.9 52.8 87.2 Sheet Supports 2 2 2 2 2 3 3 Table Height (C) inch 34 34 34 33 35 34 33 SBT Series Cutting Capacity D-TOUCH 7 CONTROL REAR VIEW WITH SUPPORT SYSTEMFAST & ACCURATE PROGRAMMABLE BACK GAUGE REAR PNEUMATIC SHEET SUPPORTS (OPTIONAL) QUICKSET BLADE CLEARANCEFLIP-UP FINGER GUARD
  22. 22. MS SERIES MECHANICAL SHEARS DURMA STANDARD EQUIPMENT ƒƒ DT7 Touchscreen Control (10 Gauge) ƒƒ 40” Squaring Arm with T-Slotted and Disappearing Stop ƒƒ Two 40” Front Support Arms ƒƒ 17” Rear Operated Manual Back Gauge (11, 12 & 14 Gauge) ƒƒ Solid Hold-down with Non-slip Rubber Pad ƒƒ Portable Foot Control with Emergency Stop Button ƒƒ Tabletop Ball Transfers (10 Gauge) ƒƒ 29.5” Programmable Back Gauge (10 Gauge) OPTIONAL EQUIPMENT ƒƒ DT7 Touchscreen Control (11, 12 & 14 Gauge) ƒƒ Protractor for Angle Shearing ƒƒ Rear Pneumatic Sheet Support System ƒƒ Stroke Counter ƒƒ Extended Squaring and Support Arms (3004) ƒƒ 29.5” Programmable Back Gauge (11, 12 & 14 Gauge) CAPACITIES ƒƒ 10 - 11 - 12 - 14 Gauges ƒƒ 4 - 10’ Lengths
  23. 23. MS SERIES MECHANICAL SHEARS SPECIFICATIONS DURMA MS Series Unit 1303 2003 2525 2005 2504 3004 Cutting Capacity inch 0.12 0.12 0.10 0.16 0.16 0.16 Cutting length inch 53 81 100 81 100 122 Cutting angle 2°30' 2°12' 1°30' 1°30' 1°30' 1°30' Stroke per minute 35 35 35 42 42 42 Motor power kw 3 3 3 7.5 7.5 7.5 Back gauge range ipm 22 22 22 30 30 30 Table width inch 16 16 16 18 18 18 Table height inch 33 33 33 32 32 32 Height inch 47 47 47 52 52 52 Width inch 53 53 53 91 91 91 Length inch 67 94 113 100 120 144 Approx. Weight pounds 2425 2866 3086 6173 7121 8223 D-TOUCH 7 CONTROL REAR PNEUMATIC SHEET SUPPORTSFAST & ACCURATE PROGRAMMABLE BACK GAUGE TABLETOP BALL TRANSFERS REAR PNEUMATIC SHEET SUPPORTS PROTRACTOR (OPTIONAL)
  24. 24. MRB SERIES PLATE ROLLS DURMA STANDARD EQUIPMENT ƒƒ Conical Bending ƒƒ Top & Bottom Rolls Gear Driven ƒƒ Motorized Back Roll ƒƒ Pendant Control ƒƒ SAE 1050 Steel Rolls ƒƒ Induction Hardened Rolls ƒƒ Stress Relieved Frame ƒƒ Material Support (8’& 10’) ƒƒ Brake for Precise Control OPTIONAL EQUIPMENT ƒƒ Digital Readouts ƒƒ Remote Control ƒƒ Motorized Bottom Roll ƒƒ Ground Rolls ƒƒ Roll Extension for Profiles CAPACITIES ƒƒ Bend Length 5-10’ ƒƒ Bend Thickness 10 ga. – 1/4” STANDARD EQUIPMENT ƒƒ Conical Bending ƒƒ Bottom & Back Rolls Man. Driven ƒƒ Top & Bottom Rolls Gear DrivenChain ƒƒ Portable Control ƒƒ SAE 1050 Steel Rolls ƒƒ Cast Iron Frame ƒƒ Grooves on Bottom & Back Roll OPTIONAL EQUIPMENT ƒƒ Hardened Rolls ƒƒ Ground Rolls CAPACITIES ƒƒ Bend Length 40” – 78” ƒƒ Bend Thickness .040 – 11 Ga. MRB-E SERIES
  25. 25. MRB SERIES PLATE ROLLS SPECIFICATIONS DURMA MRB-S Series 1506 2005 2006 2007 2503 2504 2506 2508 3004 3006 Bending Length in 60.2 79.9 79.9 79.9 99.6 99.6 99.6 99.6 119.3 119.3 Bending Capacity in 0.25 0.20 0.25 0.28 0.12 0.16 0.25 0.32 0.16 0.25 Pre Bending in 0.16 0.16 0.20 0.25 0.08 0.12 0.16 0.25 0.08 0.16 Top Roll Ø in 5.9 6.3 6.7 7.5 5.9 6.7 7.5 8.7 7.1 8.7 Motor Power hp 5.5 5.5 5.5 5.5 5.5 5.5 7.5 7.5 5.5 7.5 L x H x W in 122 x 44 x 40 142 x 44 x 40 142 x 44 x 40 148 x 47 x 45 161 x 44 x 40 161 x 44 x 40 167 x 47 x 45 167 x 47 x 45 181 x 44 x 40 187 x 47 x 45 Weight lbs 4630 5071 5291 7496T 5952 5952 8267 9766 9370 10847 MRB-E Series 1001 1002 1003 1202 1225 1203 1525 2015 2002 Bending Length in 40.6 40.6 40.6 50.4 50.4 50.4 60.2 79.9 79.9 Bending Capacity in 0.04 0.08 0.12 0.08 0.10 0.12 0.10 0.06 0.08 Pre Bending in 0.03 0.05 0.08 0.05 0.06 0.08 0.06 0.03 0.04 Top Roll Ø in 2.2 3 3.5 3 3.5 3.7 3.7 3.5 3.7 Motor Power kw 1.0 1.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 L x H x W in 69 x 43 x 33 69 x 45 x 33 69 x 45 x 33 79 x 45 x 33 79 x 45 x 33 79 x 45 x 33 89 x 45 x 33 108 x 45 x 33 108 x 45 x 33 Weight lbs 617 849 970 1003 1168 1224 1389 1499 1576 MRB Series 1004 1005 1204 1205 1206 1503 1504 1505 2004 Bending Length in 40.6 40.6 50.4 50.4 50.4 60.2 50.4 50.4 50.4 Bending Capacity in 0.16 0.2 0.16 0.2 0.25 0.12 0.2 0.2 0.2 Pre Bending in 0.12 0.16 0.12 0.14 0.16 0.08 0.14 0.14 0.14 Top Roll Ø in 4.3 5.1 4.7 5.1 5.5 4.3 5.1 5.1 5.1 Motor Power kw 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 L x H x W in 75 x 44 x 37 75 x 44 x 37 85 x 44 x 37 85 x 44 x 37 85 x 44 x 37 94 x 44 x 37 85 x 44 x 37 85 x 44 x 37 85 x 44 x 37 Weight lbs 2635 2811 2965 3053 3208 3060 3053 3053 3053 MRB-E SERIES MRB-S SERIES
  26. 26. HRB4 SERIES PLATE ROLLS DURMA STANDARD EQUIPMENT ƒƒ Control Unit with DROs ƒƒ Conical Bending ƒƒ Bearing Seated Rolls ƒƒ Stress Relieved Frame ƒƒ Induction Hardened Rolls ƒƒ PLC Synchronized Side Rolls ƒƒ Hyd. Top Roll Opening ƒƒ Pressure Adj. Bottom Rolls CAPACITIES ƒƒ Bend Length 5 - 20’ ƒƒ Bend Thickness 1/4” - 6” OPTIONAL EQUIPMENT ƒƒ NC Control (far right) ƒƒ Polished Rolls ƒƒ Side Supports ƒƒ Profile Bending Rolls ƒƒ Welding at Machine ƒƒ Material Feed Table ƒƒ CNC Control w/Color Graphics (right) ƒƒ Oil Cooler ƒƒ Vertical Support Crane ƒƒ Changeable Top Roll (for smaller dia.) ƒƒ Special Wind Tower Application
  27. 27. HRB4 SERIES PLATE ROLLS SPECIFICATIONS DURMA ødx1.5 ødx3 ødx5 HRB 4 Series Bending Leight Pre- Bending Capacities Bending Capacities Bending Capacities Top Roll Bottom Roll Side Rolls Max. Pass Through Length Width Height Working Height Weight Motor Power Unit inch inch inch inch inch inch inch inch inch inch inch inch pound hp 1504 61 0.12 0.16 0.20 5.5 5.1 5.1 0.5 120 35 45 35 5225 5 1505 61 0.16 0.20 0.24 5.9 5.5 5.1 0.5 120 35 45 34 5357 7.5 1507 61 0.20 0.28 0.31 6.7 5.9 5.5 0.5 120 35 45 34 5732 7.5 2003 81 0.08 0.12 0.16 5.5 5.1 5.1 0.5 139 35 45 35 6019 4 2004 81 0.12 0.16 0.20 5.9 5.5 5.1 0.5 139 35 45 34 6217 7 2006 81 0.16 0.24 0.28 6.7 5.9 5.5 0.6 139 35 45 34 6680 7.5 2008 81 0.24 0.31 0.39 7.9 7.5 6.7 1.2 151 46 46 33 10428 10 2010 81 0.31 0.39 0.47 8.3 7.5 7.1 1.2 151 46 46 33 10891 10 2013 81 0.39 0.51 0.59 9.1 8.3 7.5 1.2 151 46 46 32 11640 15 2016 81 0.51 0.63 0.71 10.6 9.8 8.7 2 168 65 63 45 21164 20 2020 81 0.63 0.79 0.87 11.8 10.6 8.7 2 168 65 63 45 22046 25 2025 81 0.79 0.98 1.10 13 11.8 9.4 2 168 65 63 44 23810 30 2030 81 0.98 1.18 1.30 14.2 13 10.6 2.4 178 81 81 59 34613 40 2035 81 1.18 1.38 1.50 15.7 14.6 11.4 2.6 178 81 81 59 37038 50 2040 81 1.38 1.57 1.73 16.9 15.7 12.6 2.8 178 81 81 58 39463 60 2050 81 1.57 1.97 2.17 18.1 18.1 14.6 3.5 203 91 100 74 63934 70 2065 81 1.97 2.56 2.76 19.3 19.3 15.4 3.9 207 91 102 73 66139 80 2506 100 0.16 0.24 0.28 7.9 7.5 6.7 1.2 170 46 46 33 11552 10 2508 100 0.24 0.31 0.39 8.3 7.5 7.1 1.2 170 46 46 33 12125 10 2510 100 0.31 0.39 0.47 9.1 8.3 7.5 1.2 170 46 46 32 13051 15 2513 100 0.39 0.51 0.59 10.6 9.8 8.7 2 187 65 63 45 23369 20 2516 100 0.51 0.63 0.71 11.8 10.6 8.7 2 187 65 63 45 24471 25 2520 100 0.63 0.79 0.87 13 11.8 9.4 2 187 65 63 44 26676 30 2525 100 0.79 0.98 1.10 14.2 13 10.6 2.4 197 81 81 59 38581 30 2530 100 0.98 1.18 1.30 15.7 14.6 11.4 2.6 197 81 81 59 41447 40 2535 100 1.18 1.38 1.50 16.9 15.7 12.6 2.8 197 81 81 58 44754 50 2540 100 1.38 1.57 1.73 18.1 18.1 14.6 3.5 222 91 100 74 68343 60 2550 100 1.57 1.97 2.17 19.3 19.3 14.6 3.9 226 91 102 73 77162 70 2565 * 100 1.97 2.56 2.76 19.7 19.7 16.1 3.9 230 93 104 72 85980 80 Specifications are approximate and subject to change without notice. SPECIAL WIND TOWER APPLICATION CONICAL BENDINGSTRESS RELIEVED FRAME
  28. 28. HRB3 SERIES PLATE ROLLS DURMA CAPACITIES ƒƒ Bend Length 8 - 13’ ƒƒ Bend Thickness 1/4” - 1” STANDARD EQUIPMENT ƒƒ Control Unit with DROs ƒƒ Conical Bending ƒƒ Bearing Seated Rolls ƒƒ Stress Relieved Frame ƒƒ Induction Hardened Rolls ƒƒ PLC Synchronized Side Rolls ƒƒ Hyd. Drop End w/Easy Remove ƒƒ Pressure Adj. Bottom Rolls ƒƒ Rectilinear Guides (machines with rolls 17.72” or greater) OPTIONAL EQUIPMENT ƒƒ Variable Speed Control ƒƒ Oil Cooler ƒƒ Vertical Supports ƒƒ Welding at Machine ƒƒ Special Wind Tower Application ƒƒ Changeable Top Roll (for smaller dia.) ƒƒ Polished Rolls ƒƒ Side Supports ƒƒ Profile Bending Rolls ƒƒ Material Feed Table CNC CONTROL NC CONTROL
  29. 29. HRB3 SERIES PLATE ROLLS SPECIFICATIONS DURMA Specifications are approximate and subject to change without notice. ødx1.5 ødx3 ødx5 HRB 3 Series Bending Leight Pre- Bending Capacities Bending Capacities Bending Capacities Top Roll Side Rolls Max. Pass Through Length Width Height Working Height Weight Motor Power Unit inch inch inch inch inch inch inch inch inch inch inch pound hp 2006 81 0.157 0.236 0.276 7.3 6.5 2.8 152 51 45 32 5512 5.5 2010 81 0.315 0.394 0.472 8.3 7.5 3 151 46 46 33 8818 7.5 2013 81 0.394 0.512 0.591 9.1 7.9 3 151 46 46 32 10582 11 2508 100 0.236 0.315 0.394 8.3 7.5 3 170 46 46 33 9921 7.5 2513 100 0.394 0.512 0.591 10.6 9.8 3.9 187 65 63 45 14771 15 2520 100 0.630 0.787 0.866 13 11.4 3.9 187 65 63 44 22928 22 3006 122 0.157 0.236 0.276 8.3 7.5 3 192 46 46 33 11023 7.5 3010 122 0.315 0.394 0.472 10.6 9.8 3.9 209 65 63 45 16535 11 3013 122 0.394 0.512 0.591 11.8 10.6 3.9 209 65 63 45 19842 15 3016 122 0.512 0.63 0.709 13 11.4 3.9 209 65 63 44 26015 18.5 3020 122 0.63 0.787 0.866 14.2 13 4.9 219 81 81 59 27558 22 3025 122 0.787 0.984 1.102 15.7 13.8 4.9 219 81 81 59 37479 30 PLC CONTROL SYSTEM DURMA RECTILINEAR ROLLS STRESS RELIEVED FRAME
  30. 30. HB SERIES BANDSAWS DURMA STANDARD EQUIPMENT ƒƒ Hydraulic Vice ƒƒ Electronic Variable Cutting Speed Adjustment with Inverter ƒƒ Bimetal Bandsaw and Cooling System ƒƒ Blade Tensioning - Hydro Mechanical (HB-S) ƒƒ Bearing and Carbide Tape Blade Housing ƒƒ Cutting Height Adjustment ƒƒ Motorized Roller Feeding (HB-S) ƒƒ Bi-directional 45° Adjustable Angle Vice (HB-S) ƒƒ Top Clamping - Mechanical ƒƒ Length Adjustment - Electrical ƒƒ Part Counter (HB-S) ƒƒ Roller Table OPTIONAL EQUIPMENT ƒƒ Chip Brush ƒƒ Motorized Chip Brush ƒƒ Chip Conveyor ƒƒ Blade Tensioning - Hydro Mechanical ƒƒ Blade Tensioning - Hydraulic ƒƒ Laser Marking System ƒƒ NC Control System (HB-S) ƒƒ Top Clamping - Hydraulic ƒƒ Turn Table (HB-S) ƒƒ Micro-spray Cooling System ƒƒ Automatic Cutting Pressure Control ƒƒ 47” Material Roller Table ƒƒ 118” Motorized Roller Table (HB-S) HB Series Bandsaws are available in two models: HB-S (Semi-Automatic) and HB-S (Automatic).
  31. 31. DCB SERIES BANDSAWS DURMA ƒƒ Two-way 45° Angle Adjustable Clamp ƒƒ Hydraulic Vice ƒƒ Electronic Variable Cutting Speed Adjustment with Inverter ƒƒ Bimetal Bandsaw and Cooling System ƒƒ Chip Brush ƒƒ Blade Tensioning - Hydro Mechanical ƒƒ Bearing and Carbide Tape Blade Housing ƒƒ Cutting Height Adjustment ƒƒ Motorized Roller Feeding ƒƒ Top Clamping - Mechanical ƒƒ Length Adjustment - Electrical ƒƒ Part Counter ƒƒ 47” Roller Table ƒƒ One-Way 60° Adjustable Turn Table Base ƒƒ Hydraulic Vice ƒƒ Electronic Variable Cutting Speed Adjustment with Inverter ƒƒ Bimetal Bandsaw and Cooling System ƒƒ Blade Tensioning - Hydro Mechanical ƒƒ Bearing and Carbide Tape Blade Housing ƒƒ Cutting Height Adjustment ƒƒ Motorized Roller Feeding ƒƒ Top Clamping - Mechanical ƒƒ Length Adjustment - Electrical ƒƒ Chip Brush ƒƒ Part Counter ƒƒ 47” Roller Table ƒƒ Hydraulic Vice ƒƒ Synchronized Cutting Arm & Clamp System ƒƒ Bilateral 60° Angled Cut ƒƒ Digital Readout of Turn Table ƒƒ Motorized Turn Table ƒƒ Electronic Variable Cutting Speed Adjustment with Inverter ƒƒ Bimetal Bandsaw and Cooling System ƒƒ Blade Tensioning - Hydro Mechanical ƒƒ Bearing and Carbide Tape Blade Housing ƒƒ Cutting Height Adjustment ƒƒ Motorized Roller Feeding ƒƒ Top Clamping - Mechanical ƒƒ Length Adjustment - Electrical ƒƒ Chip Brush ƒƒ Part Counter ƒƒ 47” Roller Table ƒƒ Hydraulic Vice ƒƒ Electronic Variable Cutting Speed Adjustment with Inverter ƒƒ Bimetal Bandsaw and Cooling System ƒƒ Blade Tensioning - Hydromechanical ƒƒ Bearing and Carbide Tape Blade Housing ƒƒ Cutting Height Adjustment ƒƒ Motorized Roller Feeding ƒƒ Top Clamping - Mechanical ƒƒ Length Adjustment - Electrical ƒƒ Chip Brush ƒƒ Part Counter ƒƒ Roller Table - 47” ƒƒ Hydraulic Vice ƒƒ Motorized Feeding Vice ƒƒ One-way 60° Adjustable Cutting Angle ƒƒ Electronic Variable Cutting Speed Adjustment with Inverter ƒƒ Bimetal Bandsaw and Cutting System ƒƒ Blade Tensioning - Hydro Mechanical ƒƒ Bearing and Carbide Tape Blade Housing ƒƒ Cutting Height Adjustment ƒƒ Motorized Roller Feeding ƒƒ Top Clamping - Mechanical ƒƒ Length Adjustment - Electrical ƒƒ Chip Brush ƒƒ Part Counter ƒƒ Roller Table - 47” DCB-S DCB-M DCB-DM DCB-A DCB-FA
  32. 32. IW SERIES IRONWORKERS DURMA STANDARD EQUIPMENT ƒƒ Swing Away Stripper ƒƒ Punching Station ƒƒ Section Cutting ƒƒ Angle Cutting ƒƒ Flat Bar Shearing ƒƒ Notching ƒƒ Twist and Drop Punch Holder ƒƒ Touch and Cut Back Stop ƒƒ Angle Mitering & Flat Bar Station ƒƒ Angle Station ƒƒ Large Throat and Gauging Table ƒƒ Channel Web Punching ƒƒ Bending Attachment IW SINGLE CYLINDER CAPACITIES ƒƒ 40 - 45 Tons ƒƒ Five Stations IW DUAL CYLINDER CAPACITIES ƒƒ 60 - 88 - 121 - 188 Tons ƒƒ Five Stations
  33. 33. IW SERIES IRONWORKERS SPECIFICATIONS DURMA Triangular Notch (Thickness) Inch 0.19 0.19 0.25 0.25 0.25 0.25 0.25 0.25 Triangular Notching Width Inch 3 3 3 3 5 5 5 5 Triangulat Notching Depth Inch 3 3 3 3 5 5 5 5 Motorpower HP 4 4 8 8 15 15 15 15 Oil Capacity Gallon 9 9 20 20 20 20 20 40 Net Weight (Approx.) lb 1742 1830 2822 3009 5908 5908 8223 17666 Machine Dimension (Approx.) Inch 62x57x56 62x57x61 66x68x70 82x70x80 82x70x80 92x70x80 104x70x89 127x43x90 Packing Dimension (Approx.) mm 63x28x58 63x28x72 67x28x72 83x32x72 83x32x82 93x32x82 104x32x92 43 Optional Equipment Technical Data IW Series 45 45D 55 55DT 80 80DT 110DT 165 DT Punching Tons Inch 50 50 60 60 88 88 121 180 Punch Capacity Inch 1 1 1 1 1 1 1 1 Throat Depth Inch 6 6 9 20 11 20 24 24 Maximum Stroke Length Inch 0.75 0.75 0.375 0.375 0.5 0.5 0.125 0.5 Strokes Per Minute Quat. 20 20 37 37 38 38 28 31 Table Size Inch 17x 6 17 x 6 21 x 9 21x 20 21 x 11 21 x 20 21x 24 30 x 20 Table Height Inch 40 40 42 43 47 47 49 59 Largest Hole Inch 4 4 6 6 6 6 6 6 Single Vee Press Brake Inch 0 0 10 10 12 12 12 15 Multi-Vee Press Brake Inch 0 0 19 19 19 23 23 33 Pipe Notching Inch 0 0 2 2 2 2 2 2 Flat Bar (Max Thickness) Inch 8 8 8 8 12 12 15 16 Flat Bar (Max Width) Inch 12 12 11 11 18 18 23 30 Blade Length Inch 12 12 12 12 18 18 24 30 Angle Flange Trim Inch 3 3 2 2 3 3 4 5 Working Height Inch 39 39 35 35 40 40 42 39 At 90˚ Shearing Inch 3x3x5/16 3x3x5/16 4x4x3/8 4x4x3/8 5x5x1/2 5x5x1/2 6x6x1/2 8x8x3/4 At 45˚ Miter Shearing Inch 2x2x1/4 3x3x1/4 3x3x1/4 3x3x1/4 3x3x1/4 3x3x1/4 3x3x1/4 Working Height Inch 40 40 40 43 49 49 52 52 Round Bar Inch 1 1 1 1 1 1 2 2 Square Bar Inch 1 1 1 1 1 1 2 2 Working Height Inch 41 44 41 41 51 51 54 54 U- Profit Shear Inch 4 4 4 4 5 5 6 8 T- Profit Shear Inch 1 1 2 2 2 2 2 3 I- Profit Shear Inch 4 4 4 5 5 6 8 Material Thickness Inch 0.25 0.25 0.38 0.38 0.47 0.47 0.5 0.6 Rectangular (Width) Inch 1 1 1 1 2 2 2 2 Rectangular Notch (Depth) Inch 2 2 3 3 3 3 3 4 Vee Notcher (Side Depth x Thickness) mm 1 1 1 1 2 2 2 2 Optional Equipment Angle Shearing Flat Shearing Bar Shearing Optional Equipment Notching
  34. 34. FN & VN SERIES VARIABLE ANGLE NOTCHERS DURMA STANDARD EQUIPMENT ƒƒ 30-140° Quickset Adjustment of Notch Angle (VN Series Only) ƒƒ Two Protractor Gauges Material Holddowns (VN Series Only) ƒƒ T-Slotted Table with Recessed Measuring Scales ƒƒ Hand & Foot Control ƒƒ Slug Chute ƒƒ Adjustable Back Stop for Side Shearing ƒƒ Automatic Blade Clearance Angle Adjustment Degrees 90 30-140 30-140 Maximum Cutting Thickness inch .135 .135 .250 Blade Length inch 7.9 x 7.9 7.9 x 7.9 7.9 x 7.9 Horsepower inch 5.5 5.5 5.5
  35. 35. DURMA AIMS FOR CONTINUOUS DEVELOPMENT DURMA’s large investment in machining centers and production equipment, as well as its ISO-certified factories totaling 1,350,000 square feet and 1,000 employees in Bursa, Turkey, make one of the world’s largest, efficient and most contemporary facilities in the world. In order to offer customer solutions and further develop patents, the Durma Research and Development center opened in 2010. Fifty engineers were added over the last two years. Designed and engineered with modern technology, Durma products are equipped with high quality and proven readily available components. Established in 1956, Durma has vast experience in building and supplying quality products. With over 60,000 machines delivered worldwide, Durma has earned a reputation as a supplier of innovative “value oriented” solutions. Your partner today, tomorrow, and forever.
  36. 36. © ALL RIGHTS RESERVED VERSION 13.0206DURMA

×