Published on

  • Be the first to comment

  • Be the first to like this

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide


  1. 1. GESTSWFR01 S oftware per la generazione di profili su masselli (installed on the machine) This software expansion makes it possible to shape small blocks with "comb-type" process, either vertical or horizontal, using the diamond saw blade. The shape of the profile to be produced is defined using a simplified CAD supplied with the machine, or it may be imported (DXF) from another computer. Both the form of the small blocks to be shaped and the machining are displayed on the machine monitor. The interpolated axes of the machine enable to obtain surfaces which can be even very elaborate. The different profiles can be stored in a database and recalled at will. Accessories
  2. 2. FEBBS Hydraulic tilting worktable with motorized, programmable rotation. The table can be positioned and pneumatically locked from 0° to 360° and can tilt from 0° to 80° so that slabs can be loaded upright. When the table tilts, the loading capacity is 1.500 kg. Using this accessory, the counter-table is no longer needed. The wood-panelling of the worktable is included in the supply. Tilting worktable dimensions: 3.500x1.800 mm. Accessories
  3. 3. 1BF203502 Counter-table Mod. 1BF/20-35 Wood-panelled counter-table to be placed on the bridge saw worktable in order to load the slabs arranged in a pile while the machine is operating. It is advisable to purchase two counter-tables (when purchasing them, the worktable of the machine is supplied without wood-panelling). Accessories
  4. 4. FKBROPA01 Worktable with free-moving omnidirectional rollers (replacing the standard worktable) Worktable equipped with a large quantity of rollers (90) so as to enable the manual handling of small pieces as well. Rollers are positioned on ten transversal rows featuring a distance between centres of 400 mm and are installed on a structure provided with pneumatic lifting which has a max. capacity of 600 kg. Note: The operator’s physical strength is sufficient for slabs weighing up to 400 kg; for slabs weighing over 400 kg, a pusher is needed. N.B. This accessory does not allow to use the worktable with tilting top Accessories
  5. 5. FRGMS11 Secondo banco di lavoro a norme CE Accessories (same as the standard table) made from arc-welded steel and provided with shelves and motorized rotation driven by an inverter-controlled motor. The table can be pneumatically locked in any position. The supply includes an additional set of bridge guide runners, the extension of the bridge cable-holding chain and the other components required for working with the double table.
  6. 6. SADBC Bar code manual reader with automatic transmission of the working program to the machine . Accessories
  7. 7. FECOP1A00 Optoelectronic copying device of drawings This accessory allows to sense a drawing which is then stored by the NC and can be used time and again. Accessories
  8. 8. STPCST PC station + printer of labels with bar code The PC, with the colour monitor and printer, is housed in a sheet metal cabinet, while the keyboard and mouse are placed on the bolster, under the monitor. Labels must be glued manually to the pieces Accessories
  9. 9. STIJ Printer of labels with bar code Printer of labels with bar code, linked with the computer numerical control (CNC) of the machines. Labels are to be manually glued on the pieces. Accessories
  10. 10. FOTO2035 Slab scanning system with digital camera Accessories The system includes hardware and software for the scanning of the slab image which is displayed on the 15-inch touch-screen colour video. The operator marks the slab outline and the contour of any possible surface defect with the mouse. So defined profile and defects will be the basis for both the optimization of the slab and the programming of cuts while the machine is working. The digital camera is installed on a special support. N.B. The "slab support top" accessory must be purchased if there is no conveyor supporting the slab. N.B. In order to create the ideal environment for taking digital photographs, the arrangement of the correct light intensity in the area of the camera, the removal of any possible luminous interference as well as the removal of all patches of shade and environmental reflections, shall be at the customer’s care and expense.
  11. 11. FKPAIL Inclined slab support top Inclined slab support top, outside the machine Accessories
  12. 12. OFFMACCAM Software licence to be installed on a PC of the customer linked with the machine through Ethernet net; this software enables the drawing, the import of pieces to be realized from DXF format, the automatic optimization of the piece positioning inside the slabs to be machined (which are sensed by the operator using the FOTO2035 accessory, not included in the price) and the realization of the relevant production programs. Accessories
  13. 13. FKACS1100A00 Prearrangement of the FK/NC1100 bridge saw In order to carry out contouring and dishing machining; composed of: - spindle motor with speed up to 6.000rpm and threaded hole on the shaft to fix the tools -inverter for the variation of the rotation speed -counter-table for the traditional processing with saw blade. Accessories
  14. 14. BSCAMSAWA00 Bretonsmartcam SAW Accessories Software for the CAD/CAM programming of sawing centres with 3 interpolated axes. CAD/CAM software to draw and machine complex stone workpieces, allowing to carry out the following major functions: - cutting of slabs with saw blade - shaping, profiling, scabbling, trimming and dishing out of small blocks with saw blade - engraving of Windows "True Type" letters with millers - dishing out and drilling with ball end two-fluted mills The software operates in a Windows environment, is easy-to-understand and user-friendly thanks to the programming on 3 interpolated and 2 positioned axes. It is provided with a 2D CAD that allows to: - realize any 2D drawing with relevant dimensions - define the piece tridimensional volume of work - define any plane within the generated piece tridimensional volume of work - manage the 2D drawing realized on the selected working plane, however it is oriented in the space - import drawings in .DXF and .DWG format from external CAD or template sensors - place the pieces to be realized directly on the slab to be machined, so as to utilize its surface at most It is also provided with a 3D simulator enabling to: - simulate the real machining program generated by the CAM in ISO language on the virtual model of the machine with all its accessories and equipment - verify the correct execution of the machining and trace any possible jamming between tool, piece and fastening equipment The supply includes nr. 2 training days .