Abstract Software defects prediction aims to reduce software testing efforts by guiding the testers through the defect classification of software systems. Defect predictors are widely used in many organizations to predict software defects in order to save time, improve quality, testing and for better planning of the resources to meet the timelines. The application of statistical software testing defect prediction model in a real life setting is extremely difficult because it requires more number of data variables and metrics and also historical defect data to predict the next releases or new similar type of projects. This paper explains our statistical model, how it will accurately predict the defects for upcoming software releases or projects. We have used 20 past release data points of software project, 5 parameters and build a model by applying descriptive statistics, correlation and multiple linear regression models with 95% confidence intervals (CI). In this appropriate multiple linear regression model the R-square value was 0.91 and its Standard Error is 5.90%. The Software testing defect prediction model is now being used to predict defects at various testing projects and operational releases. We have found 90.76% precision between actual and predicted defects.
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology
A Review on Parameter Estimation Techniques of Software Reliability Growth Mo...Editor IJCATR
Software reliability is considered as a quantifiable metric, which is defined as the probability of a software to operate
without failure for a specified period of time in a specific environment. Various software reliability growth models have been proposed
to predict the reliability of a software. These models help vendors to predict the behaviour of the software before shipment. The
reliability is predicted by estimating the parameters of the software reliability growth models. But the model parameters are generally
in nonlinear relationships which creates many problems in finding the optimal parameters using traditional techniques like Maximum
Likelihood and least Square Estimation. Various stochastic search algorithms have been introduced which have made the task of
parameter estimation, more reliable and computationally easier. Parameter estimation of NHPP based reliability models, using MLE
and using an evolutionary search algorithm called Particle Swarm Optimization, has been explored in the paper.
Software Quality Assurance (SQA) teams play a critical role in the software development process to ensure the absence of software defects. It is not feasible to perform exhaustive SQA tasks (i.e., software testing and code review) on a large software product given the limited SQA resources that are available. Thus, the prioritization of SQA efforts is an essential step in all SQA efforts. Defect prediction models are used to prioritize risky software modules and understand the impact of software metrics on the defect-proneness of software modules. The predictions and insights that are derived from defect prediction models can help software teams allocate their limited SQA resources to the modules that are most likely to be defective and avoid common past pitfalls that are associated with the defective modules of the past. However, the predictions and insights that are derived from defect prediction models may be inaccurate and unreliable if practitioners do not control for the impact of experimental components (e.g., datasets, metrics, and classifiers) on defect prediction models, which could lead to erroneous decision-making in practice. In this thesis, we investigate the impact of experimental components on the performance and interpretation of defect prediction models. More specifically, we investigate the impact of the three often overlooked experimental components (i.e., issue report mislabelling, parameter optimization of classification techniques, and model validation techniques) have on defect prediction models. Through case studies of systems that span both proprietary and open-source domains, we demonstrate that (1) issue report mislabelling does not impact the precision of defect prediction models, suggesting that researchers can rely on the predictions of defect prediction models that were trained using noisy defect datasets; (2) automated parameter optimization for classification techniques substantially improve the performance and stability of defect prediction models, as well as they change their interpretation, suggesting that researchers should no longer shy from applying parameter optimization to their models; and (3) the out-of-sample bootstrap validation technique produces a good balance between bias and variance of performance estimates, suggesting that the single holdout and cross-validation families that are commonly-used nowadays should be avoided.
With the rise of software systems ranging from personal assistance to the nation's facilities, software defects become more critical concerns as they can cost millions of dollar as well as impact human lives. Yet, at the breakneck pace of rapid software development settings (like DevOps paradigm), the Quality Assurance (QA) practices nowadays are still time-consuming. Continuous Analytics for Software Quality (i.e., defect prediction models) can help development teams prioritize their QA resources and chart better quality improvement plan to avoid pitfalls in the past that lead to future software defects. Due to the need of specialists to design and configure a large number of configurations (e.g., data quality, data preprocessing, classification techniques, interpretation techniques), a set of practical guidelines for developing accurate and interpretable defect models has not been well-developed.
The ultimate goal of my research aims to (1) provide practical guidelines on how to develop accurate and interpretable defect models for non-specialists; (2) develop an intelligible defect model that offer suggestions how to improve both software quality and processes; and (3) integrate defect models into a real-world practice of rapid development cycles like CI/CD settings. My research project is expected to provide significant benefits including the reduction of software defects and operating costs, while accelerating development productivity for building software systems in many of Australia's critical domains such as Smart Cities and e-Health.
Machine Learning approaches are good in solving problems that have less information. In most cases, the
software domain problems characterize as a process of learning that depend on the various circumstances
and changes accordingly. A predictive model is constructed by using machine learning approaches and
classified them into defective and non-defective modules. Machine learning techniques help developers to
retrieve useful information after the classification and enable them to analyse data from different
perspectives. Machine learning techniques are proven to be useful in terms of software bug prediction. This
study used public available data sets of software modules and provides comparative performance analysis
of different machine learning techniques for software bug prediction. Results showed most of the machine
learning methods performed well on software bug datasets.
Software testing is an important activity of the software development process. Software testing is most
efforts consuming phase in software development. One would like to minimize the effort and maximize the
number of faults detected and automated test case generation contributes to reduce cost and time effort.
Hence test case generation may be treated as an optimization problem In this paper we have used genetic
algorithm to optimize the test case that are generated applying conditional coverage on source code. Test
case data is generated automatically using genetic algorithm are optimized and outperforms the test cases
generated by random testing.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology
A Review on Parameter Estimation Techniques of Software Reliability Growth Mo...Editor IJCATR
Software reliability is considered as a quantifiable metric, which is defined as the probability of a software to operate
without failure for a specified period of time in a specific environment. Various software reliability growth models have been proposed
to predict the reliability of a software. These models help vendors to predict the behaviour of the software before shipment. The
reliability is predicted by estimating the parameters of the software reliability growth models. But the model parameters are generally
in nonlinear relationships which creates many problems in finding the optimal parameters using traditional techniques like Maximum
Likelihood and least Square Estimation. Various stochastic search algorithms have been introduced which have made the task of
parameter estimation, more reliable and computationally easier. Parameter estimation of NHPP based reliability models, using MLE
and using an evolutionary search algorithm called Particle Swarm Optimization, has been explored in the paper.
Software Quality Assurance (SQA) teams play a critical role in the software development process to ensure the absence of software defects. It is not feasible to perform exhaustive SQA tasks (i.e., software testing and code review) on a large software product given the limited SQA resources that are available. Thus, the prioritization of SQA efforts is an essential step in all SQA efforts. Defect prediction models are used to prioritize risky software modules and understand the impact of software metrics on the defect-proneness of software modules. The predictions and insights that are derived from defect prediction models can help software teams allocate their limited SQA resources to the modules that are most likely to be defective and avoid common past pitfalls that are associated with the defective modules of the past. However, the predictions and insights that are derived from defect prediction models may be inaccurate and unreliable if practitioners do not control for the impact of experimental components (e.g., datasets, metrics, and classifiers) on defect prediction models, which could lead to erroneous decision-making in practice. In this thesis, we investigate the impact of experimental components on the performance and interpretation of defect prediction models. More specifically, we investigate the impact of the three often overlooked experimental components (i.e., issue report mislabelling, parameter optimization of classification techniques, and model validation techniques) have on defect prediction models. Through case studies of systems that span both proprietary and open-source domains, we demonstrate that (1) issue report mislabelling does not impact the precision of defect prediction models, suggesting that researchers can rely on the predictions of defect prediction models that were trained using noisy defect datasets; (2) automated parameter optimization for classification techniques substantially improve the performance and stability of defect prediction models, as well as they change their interpretation, suggesting that researchers should no longer shy from applying parameter optimization to their models; and (3) the out-of-sample bootstrap validation technique produces a good balance between bias and variance of performance estimates, suggesting that the single holdout and cross-validation families that are commonly-used nowadays should be avoided.
With the rise of software systems ranging from personal assistance to the nation's facilities, software defects become more critical concerns as they can cost millions of dollar as well as impact human lives. Yet, at the breakneck pace of rapid software development settings (like DevOps paradigm), the Quality Assurance (QA) practices nowadays are still time-consuming. Continuous Analytics for Software Quality (i.e., defect prediction models) can help development teams prioritize their QA resources and chart better quality improvement plan to avoid pitfalls in the past that lead to future software defects. Due to the need of specialists to design and configure a large number of configurations (e.g., data quality, data preprocessing, classification techniques, interpretation techniques), a set of practical guidelines for developing accurate and interpretable defect models has not been well-developed.
The ultimate goal of my research aims to (1) provide practical guidelines on how to develop accurate and interpretable defect models for non-specialists; (2) develop an intelligible defect model that offer suggestions how to improve both software quality and processes; and (3) integrate defect models into a real-world practice of rapid development cycles like CI/CD settings. My research project is expected to provide significant benefits including the reduction of software defects and operating costs, while accelerating development productivity for building software systems in many of Australia's critical domains such as Smart Cities and e-Health.
Machine Learning approaches are good in solving problems that have less information. In most cases, the
software domain problems characterize as a process of learning that depend on the various circumstances
and changes accordingly. A predictive model is constructed by using machine learning approaches and
classified them into defective and non-defective modules. Machine learning techniques help developers to
retrieve useful information after the classification and enable them to analyse data from different
perspectives. Machine learning techniques are proven to be useful in terms of software bug prediction. This
study used public available data sets of software modules and provides comparative performance analysis
of different machine learning techniques for software bug prediction. Results showed most of the machine
learning methods performed well on software bug datasets.
Software testing is an important activity of the software development process. Software testing is most
efforts consuming phase in software development. One would like to minimize the effort and maximize the
number of faults detected and automated test case generation contributes to reduce cost and time effort.
Hence test case generation may be treated as an optimization problem In this paper we have used genetic
algorithm to optimize the test case that are generated applying conditional coverage on source code. Test
case data is generated automatically using genetic algorithm are optimized and outperforms the test cases
generated by random testing.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Software testing effort estimation with cobb douglas function a practical app...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Software analytics focuses on analyzing and modeling a rich source of software data using well-established data analytics techniques in order to glean actionable insights for improving development practices, productivity, and software quality. However, if care is not taken when analyzing and modeling software data, the predictions and insights that are derived from analytical models may be inaccurate and unreliable. The goal of this hands-on tutorial is to guide participants on how to (1) analyze software data using statistical techniques like correlation analysis, hypothesis testing, effect size analysis, and multiple comparisons, (2) develop accurate, reliable, and reproducible analytical models, (3) interpret the models to uncover relationships and insights, and (4) discuss pitfalls associated with analytical techniques including hands-on examples with real software data. R will be the primary programming language. Code samples will be available in a public GitHub repository. Participants will do exercises via either RStudio or Jupyter Notebook through Binder.
Software analytics (for software quality purpose) is a statistical or machine learning classifier that is trained to identify defect-prone software modules. The goal of software analytics is to help software engineers prioritize their software testing effort on the most-risky modules and understand past pitfalls that lead to defective code. While the adoption of software analytics enables software organizations to distil actionable insights, there are still many barriers to broad and successful adoption of such analytics systems. Indeed, even if software organizations can access such invaluable software artifacts and toolkits for data analytics, researchers and practitioners often have little knowledge to properly develop analytics systems. Thus, the accuracy of the predictions and the insights that are derived from analytics systems is one of the most important challenges of data science in software engineering.
In this work, we conduct a series of empirical investigation to better understand the impact of experimental components (i.e., class mislabelling, parameter optimization of classification techniques, and model validation techniques) on the performance and interpretation of software analytics. To accelerate a large amount of compute-intensive experiment, we leverage the High-Performance-Computing (HPC) resources of Centre for Advanced Computing (CAC) from Queen’s University, Canada. Through case studies of systems that span both proprietary and open- source domains, we demonstrate that (1) realistic noise does not impact the precision of software analytics; (2) automated parameter optimization for classification techniques substantially improve the performance and stability of software analytics; and (3) the out-of- sample bootstrap validation technique produces a good balance between bias and variance of performance estimates. Our results lead us to conclude that the experimental components of analytics modelling impact the predictions and associated insights that are derived from software analytics. Empirical investigations on the impact of overlooked experimental components are needed to derive practical guidelines for analytics modelling.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Risk Assessment Model and its Integration into an Established Test Processijtsrd
In industry, testing has to be performed under severe pressure due to limited resources. Risk based testing which uses risks to guide the test process is applied to allocate resources and to reduce product risks. Risk assessment, i.e., risk identi cation, analysis and evaluation, determines the signi cance of the risk values assigned to tests and therefore the quality of the overall risk based test process. In this paper we provide a risk assessment model and its integration into an established test process. This framework is derived on the basis of best practices extracted from published risk based testing approaches and applied to an industrial test process. Ashwani Kumar | Prince Sood "Risk Assessment Model and its Integration into an Established Test Process" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26757.pdfPaper URL: https://www.ijtsrd.com/engineering/computer-engineering/26757/risk-assessment-model-and-its-integration-into-an-established-test-process/ashwani-kumar
Comparative Performance Analysis of Machine Learning Techniques for Software ...csandit
Machine learning techniques can be used to analyse data from different perspectives and enable
developers to retrieve useful information. Machine learning techniques are proven to be useful
in terms of software bug prediction. In this paper, a comparative performance analysis of
different machine learning techniques is explored for software bug prediction on public
available data sets. Results showed most of the machine learning methods performed well on
software bug datasets.
Software Defect Prediction Using Local and Global AnalysisEditor IJMTER
The software defect factors are used to measure the quality of the software. The software
effort estimation is used to measure the effort required for the software development process. The defect
factor makes an impact on the software development effort. Software development and cost factors are
also decided with reference to the defect and effort factors. The software defects are predicted with
reference to the module information. Module link information are used in the effort estimation process.
Data mining techniques are used in the software analysis process. Clustering techniques are used
in the property grouping process. Rule mining methods are used to learn rules from clustered data
values. The “WHERE” clustering scheme and “WHICH” rule mining scheme are used in the defect
prediction and effort estimation process. The system uses the module information for the defect
prediction and effort estimation process.
The proposed system is designed to improve the defect prediction and effort estimation process.
The Single Objective Genetic Algorithm (SOGA) is used in the clustering process. The rule learning
operations are carried out sing the Apriori algorithm. The system improves the cluster accuracy levels.
The defect prediction and effort estimation accuracy is also improved by the system. The system is
developed using the Java language and Oracle relation database environment.
Defect prediction models help software quality assurance teams to effectively allocate their limited resources to the most defect-prone software modules. Model validation techniques, such as k-fold cross-validation, use this historical data to estimate how well a model will perform in the future. However, little is known about how accurate the performance estimates of these model validation techniques tend to be. In this paper, we set out to investigate the bias and variance of model validation techniques in the domain of defect prediction. A preliminary analysis of 101 publicly available defect prediction datasets suggests that 77% of them are highly susceptible to producing unstable results. Hence, selecting an appropriate model validation technique is a critical experimental design choice. Based on an analysis of 256 studies in the defect prediction literature, we select the 12 most commonly adopted model validation techniques for evaluation. Through a case study of data from 18 systems that span both open-source and proprietary domains, we derive the following practical guidelines for future defect prediction studies: (1) the single holdout validation techniques should be avoided; and (2) researchers should use the out-of-sample bootstrap validation technique instead of holdout or the commonly-used cross-validation techniques.
Development of software defect prediction system using artificial neural networkIJAAS Team
Software testing is an activity to enable a system is bug free during execution process. The software bug prediction is one of the most encouraging exercises of the testing phase of the software improvement life cycle. In any case, in this paper, a framework was created to anticipate the modules that deformity inclined in order to be utilized to all the more likely organize software quality affirmation exertion. Genetic Algorithm was used to extract relevant features from the acquired datasets to eliminate the possibility of overfitting and the relevant features were classified to defective or otherwise modules using the Artificial Neural Network. The system was executed in MATLAB (R2018a) Runtime environment utilizing a statistical toolkit and the performance of the system was assessed dependent on the accuracy, precision, recall, and the f-score to check the effectiveness of the system. In the finish of the led explores, the outcome indicated that ECLIPSE JDT CORE, ECLIPSE PDE UI, EQUINOX FRAMEWORK and LUCENE has the accuracy, precision, recall and the f-score of 86.93, 53.49, 79.31 and 63.89% respectively, 83.28, 31.91, 45.45 and 37.50% respectively, 83.43, 57.69, 45.45 and 50.84% respectively and 91.30, 33.33, 50.00 and 40.00% respectively. This paper presents an improved software predictive system for the software defect detections.
A Simplified Model for Evaluating Software Reliability at the Developmental S...Waqas Tariq
The use of open source software is becoming more and more predominant and it is important that the reliability of this software are evaluated. Even though a lot of researchers have tried to establish the failure pattern of different packages a deterministic model for evaluating reliability is not yet developed. The present work details a simplified model for evaluating the reliability of the open source software based on the available failure data. The methodology involves identifying a fixed number of packages at the start of the time and defining the failure rate based on the failure data for these preset number of packages. The defined function of the failure rate is used to arrive at the reliability model. The reliability values obtained using the developed model are also compared with the exact reliability values. Key words: Bugs, Failure density, Failure rate, Open source software, Reliability
Regression testing concentrates on finding defects after a major code change has occurred. Specifically, it
exposes software regressions or old bugs that have reappeared. It is an expensive testing process that has
been estimated to account for almost half of the cost of software maintenance. To improve the regression
testing process, test case prioritization techniques organizes the execution level of test cases. Further, it
gives an improved rate of fault identification, when test suites cannot run to completion.
Software testing effort estimation with cobb douglas function- a practical ap...eSAT Journals
Abstract Effort estimation is one of the critical challenges in Software Testing Life Cycle (STLC). It is the basis for the project’s effort estimation, planning, scheduling and budget planning. This paper illustrates model with an objective to depict the accuracy and bias variation of an organization’s estimates of software testing effort through Cobb-Douglas function (CDF). Data variables selected for building the model were believed to be vital and have significant impact on the accuracy of estimates. Data gathered for the completed projects in the organization for about 13 releases. Statistically, all variables in this model were statistically significant at p<0.05><0.01 levels. The Cobb-Douglas function was selected and used for the software testing effort estimation. The results achieved with CDF were compared with the estimates provided by the area expert. The model’s estimation figures are more accurate than the expert judgment. CDF has one of the appropriate techniques for estimating effort for software testing. CDF model accuracy is 93.42%.
Practical Guidelines to Improve Defect Prediction Model – A Reviewinventionjournals
Defect prediction models are used to pinpoint risky software modules and understand past pitfalls that lead to defective modules. The predictions and insights that are derived from defect prediction models may not be accurate and reliable if researchers do not consider the impact of experimental components (e.g., datasets, metrics, and classifiers) of defect prediction modeling. Therefore, a lack of awareness and practical guidelines from previous research can lead to invalid predictions and unreliable insights. Through case studies of systems that span both proprietary and open-source domains, find that (1) noise in defect datasets; (2) parameter settings of classification techniques; and (3) model validation techniques have a large impact on the predictions and insights of defect prediction models, suggesting that researchers should carefully select experimental components in order to produce more accurate and reliable defect prediction models.
A Review on Software Fault Detection and Prevention Mechanism in Software Dev...iosrjce
IOSR Journal of Computer Engineering (IOSR-JCE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of computer engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in computer technology. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Software testing effort estimation with cobb douglas function a practical app...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Software analytics focuses on analyzing and modeling a rich source of software data using well-established data analytics techniques in order to glean actionable insights for improving development practices, productivity, and software quality. However, if care is not taken when analyzing and modeling software data, the predictions and insights that are derived from analytical models may be inaccurate and unreliable. The goal of this hands-on tutorial is to guide participants on how to (1) analyze software data using statistical techniques like correlation analysis, hypothesis testing, effect size analysis, and multiple comparisons, (2) develop accurate, reliable, and reproducible analytical models, (3) interpret the models to uncover relationships and insights, and (4) discuss pitfalls associated with analytical techniques including hands-on examples with real software data. R will be the primary programming language. Code samples will be available in a public GitHub repository. Participants will do exercises via either RStudio or Jupyter Notebook through Binder.
Software analytics (for software quality purpose) is a statistical or machine learning classifier that is trained to identify defect-prone software modules. The goal of software analytics is to help software engineers prioritize their software testing effort on the most-risky modules and understand past pitfalls that lead to defective code. While the adoption of software analytics enables software organizations to distil actionable insights, there are still many barriers to broad and successful adoption of such analytics systems. Indeed, even if software organizations can access such invaluable software artifacts and toolkits for data analytics, researchers and practitioners often have little knowledge to properly develop analytics systems. Thus, the accuracy of the predictions and the insights that are derived from analytics systems is one of the most important challenges of data science in software engineering.
In this work, we conduct a series of empirical investigation to better understand the impact of experimental components (i.e., class mislabelling, parameter optimization of classification techniques, and model validation techniques) on the performance and interpretation of software analytics. To accelerate a large amount of compute-intensive experiment, we leverage the High-Performance-Computing (HPC) resources of Centre for Advanced Computing (CAC) from Queen’s University, Canada. Through case studies of systems that span both proprietary and open- source domains, we demonstrate that (1) realistic noise does not impact the precision of software analytics; (2) automated parameter optimization for classification techniques substantially improve the performance and stability of software analytics; and (3) the out-of- sample bootstrap validation technique produces a good balance between bias and variance of performance estimates. Our results lead us to conclude that the experimental components of analytics modelling impact the predictions and associated insights that are derived from software analytics. Empirical investigations on the impact of overlooked experimental components are needed to derive practical guidelines for analytics modelling.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Risk Assessment Model and its Integration into an Established Test Processijtsrd
In industry, testing has to be performed under severe pressure due to limited resources. Risk based testing which uses risks to guide the test process is applied to allocate resources and to reduce product risks. Risk assessment, i.e., risk identi cation, analysis and evaluation, determines the signi cance of the risk values assigned to tests and therefore the quality of the overall risk based test process. In this paper we provide a risk assessment model and its integration into an established test process. This framework is derived on the basis of best practices extracted from published risk based testing approaches and applied to an industrial test process. Ashwani Kumar | Prince Sood "Risk Assessment Model and its Integration into an Established Test Process" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26757.pdfPaper URL: https://www.ijtsrd.com/engineering/computer-engineering/26757/risk-assessment-model-and-its-integration-into-an-established-test-process/ashwani-kumar
Comparative Performance Analysis of Machine Learning Techniques for Software ...csandit
Machine learning techniques can be used to analyse data from different perspectives and enable
developers to retrieve useful information. Machine learning techniques are proven to be useful
in terms of software bug prediction. In this paper, a comparative performance analysis of
different machine learning techniques is explored for software bug prediction on public
available data sets. Results showed most of the machine learning methods performed well on
software bug datasets.
Software Defect Prediction Using Local and Global AnalysisEditor IJMTER
The software defect factors are used to measure the quality of the software. The software
effort estimation is used to measure the effort required for the software development process. The defect
factor makes an impact on the software development effort. Software development and cost factors are
also decided with reference to the defect and effort factors. The software defects are predicted with
reference to the module information. Module link information are used in the effort estimation process.
Data mining techniques are used in the software analysis process. Clustering techniques are used
in the property grouping process. Rule mining methods are used to learn rules from clustered data
values. The “WHERE” clustering scheme and “WHICH” rule mining scheme are used in the defect
prediction and effort estimation process. The system uses the module information for the defect
prediction and effort estimation process.
The proposed system is designed to improve the defect prediction and effort estimation process.
The Single Objective Genetic Algorithm (SOGA) is used in the clustering process. The rule learning
operations are carried out sing the Apriori algorithm. The system improves the cluster accuracy levels.
The defect prediction and effort estimation accuracy is also improved by the system. The system is
developed using the Java language and Oracle relation database environment.
Defect prediction models help software quality assurance teams to effectively allocate their limited resources to the most defect-prone software modules. Model validation techniques, such as k-fold cross-validation, use this historical data to estimate how well a model will perform in the future. However, little is known about how accurate the performance estimates of these model validation techniques tend to be. In this paper, we set out to investigate the bias and variance of model validation techniques in the domain of defect prediction. A preliminary analysis of 101 publicly available defect prediction datasets suggests that 77% of them are highly susceptible to producing unstable results. Hence, selecting an appropriate model validation technique is a critical experimental design choice. Based on an analysis of 256 studies in the defect prediction literature, we select the 12 most commonly adopted model validation techniques for evaluation. Through a case study of data from 18 systems that span both open-source and proprietary domains, we derive the following practical guidelines for future defect prediction studies: (1) the single holdout validation techniques should be avoided; and (2) researchers should use the out-of-sample bootstrap validation technique instead of holdout or the commonly-used cross-validation techniques.
Development of software defect prediction system using artificial neural networkIJAAS Team
Software testing is an activity to enable a system is bug free during execution process. The software bug prediction is one of the most encouraging exercises of the testing phase of the software improvement life cycle. In any case, in this paper, a framework was created to anticipate the modules that deformity inclined in order to be utilized to all the more likely organize software quality affirmation exertion. Genetic Algorithm was used to extract relevant features from the acquired datasets to eliminate the possibility of overfitting and the relevant features were classified to defective or otherwise modules using the Artificial Neural Network. The system was executed in MATLAB (R2018a) Runtime environment utilizing a statistical toolkit and the performance of the system was assessed dependent on the accuracy, precision, recall, and the f-score to check the effectiveness of the system. In the finish of the led explores, the outcome indicated that ECLIPSE JDT CORE, ECLIPSE PDE UI, EQUINOX FRAMEWORK and LUCENE has the accuracy, precision, recall and the f-score of 86.93, 53.49, 79.31 and 63.89% respectively, 83.28, 31.91, 45.45 and 37.50% respectively, 83.43, 57.69, 45.45 and 50.84% respectively and 91.30, 33.33, 50.00 and 40.00% respectively. This paper presents an improved software predictive system for the software defect detections.
A Simplified Model for Evaluating Software Reliability at the Developmental S...Waqas Tariq
The use of open source software is becoming more and more predominant and it is important that the reliability of this software are evaluated. Even though a lot of researchers have tried to establish the failure pattern of different packages a deterministic model for evaluating reliability is not yet developed. The present work details a simplified model for evaluating the reliability of the open source software based on the available failure data. The methodology involves identifying a fixed number of packages at the start of the time and defining the failure rate based on the failure data for these preset number of packages. The defined function of the failure rate is used to arrive at the reliability model. The reliability values obtained using the developed model are also compared with the exact reliability values. Key words: Bugs, Failure density, Failure rate, Open source software, Reliability
Regression testing concentrates on finding defects after a major code change has occurred. Specifically, it
exposes software regressions or old bugs that have reappeared. It is an expensive testing process that has
been estimated to account for almost half of the cost of software maintenance. To improve the regression
testing process, test case prioritization techniques organizes the execution level of test cases. Further, it
gives an improved rate of fault identification, when test suites cannot run to completion.
Software testing effort estimation with cobb douglas function- a practical ap...eSAT Journals
Abstract Effort estimation is one of the critical challenges in Software Testing Life Cycle (STLC). It is the basis for the project’s effort estimation, planning, scheduling and budget planning. This paper illustrates model with an objective to depict the accuracy and bias variation of an organization’s estimates of software testing effort through Cobb-Douglas function (CDF). Data variables selected for building the model were believed to be vital and have significant impact on the accuracy of estimates. Data gathered for the completed projects in the organization for about 13 releases. Statistically, all variables in this model were statistically significant at p<0.05><0.01 levels. The Cobb-Douglas function was selected and used for the software testing effort estimation. The results achieved with CDF were compared with the estimates provided by the area expert. The model’s estimation figures are more accurate than the expert judgment. CDF has one of the appropriate techniques for estimating effort for software testing. CDF model accuracy is 93.42%.
Practical Guidelines to Improve Defect Prediction Model – A Reviewinventionjournals
Defect prediction models are used to pinpoint risky software modules and understand past pitfalls that lead to defective modules. The predictions and insights that are derived from defect prediction models may not be accurate and reliable if researchers do not consider the impact of experimental components (e.g., datasets, metrics, and classifiers) of defect prediction modeling. Therefore, a lack of awareness and practical guidelines from previous research can lead to invalid predictions and unreliable insights. Through case studies of systems that span both proprietary and open-source domains, find that (1) noise in defect datasets; (2) parameter settings of classification techniques; and (3) model validation techniques have a large impact on the predictions and insights of defect prediction models, suggesting that researchers should carefully select experimental components in order to produce more accurate and reliable defect prediction models.
A Review on Software Fault Detection and Prevention Mechanism in Software Dev...iosrjce
IOSR Journal of Computer Engineering (IOSR-JCE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of computer engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in computer technology. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
In the present paper, applicability and
capability of A.I techniques for effort estimation prediction has
been investigated. It is seen that neuro fuzzy models are very
robust, characterized by fast computation, capable of handling
the distorted data. Due to the presence of data non-linearity, it is
an efficient quantitative tool to predict effort estimation. The one
hidden layer network has been developed named as OHLANFIS
using MATLAB simulation environment.
Here the initial parameters of the OHLANFIS are
identified using the subtractive clustering method. Parameters of
the Gaussian membership function are optimally determined
using the hybrid learning algorithm. From the analysis it is seen
that the Effort Estimation prediction model developed using
OHLANFIS technique has been able to perform well over normal
ANFIS Model.
From the past many years many software defects prediction models are developed to solve the various issues in software project development. Software reliability is the significant in software quality which evaluates and predicts the quality of the software based on the defects prediction. Many software companies are trying to improve the software quality and also trying to reduce the cost of the software development. Rayleigh model is one of the significant models to analyze the software defects based on the generated data. Analysis of means (ANOM) is statistical technique which gives the quality assurance based on the situations. In this paper, an improved software defect prediction models (ISDPM) are used for predicting defects occur at the time of five phases such as analysis, planning, design, testing and maintenance. To improve the performance of the proposed methodology an order statistics is adopted for better prediction. The experiments are conducted on 2 synthetic projects that are used to analyze the defects.
A Complexity Based Regression Test Selection StrategyCSEIJJournal
Software is unequivocally the foremost and indispensable entity in this technologically driven world.
Therefore quality assurance, and in particular, software testing is a crucial step in the software
development cycle. This paper presents an effective test selection strategy that uses a Spectrum of
Complexity Metrics (SCM). Our aim in this paper is to increase the efficiency of the testing process by
significantly reducing the number of test cases without having a significant drop in test effectiveness. The
strategy makes use of a comprehensive taxonomy of complexity metrics based on the product level (class,
method, statement) and its characteristics.We use a series of experiments based on three applications with
a significant number of mutants to demonstrate the effectiveness of our selection strategy.For further
evaluation, we compareour approach to boundary value analysis. The results show the capability of our
approach to detect mutants as well as the seeded errors.
Machine learning techniques can be used to analyse data from different perspectives and enable developers to retrieve useful information. Machine learning techniques are proven to be useful
in terms of software bug prediction. In this paper, a comparative performance analysis of
different machine learning techniques is explored for software bug prediction on public
available data sets. Results showed most of the machine learning methods performed well on
software bug datasets.
Software Defect Trend Forecasting In Open Source Projects using A Univariate ...CSCJournals
Our objective in this research is to provide a framework that will allow project managers, business owners, and developers an effective way to forecast the trend in software defects within a software project in real-time. By providing these stakeholders with a mechanism for forecasting defects, they can then provide the necessary resources at the right time in order to remove these defects before they become too much ultimately leading to software failure. In our research, we will not only show general trends in several open-source projects but also show trends in daily, monthly, and yearly activity. Our research shows that we can use this forecasting method up to 6 months out with only an MSE of 0.019. In this paper, we present our technique and methodologies for developing the inputs for the proposed model and the results of testing on seven open source projects. Further, we discuss the prediction models, the performance, and the implementation using the FBProphet framework and the ARIMA model.
Towards Effective Bug Triage with Software Data Reduction Techniques1crore projects
IEEE PROJECTS 2015
1 crore projects is a leading Guide for ieee Projects and real time projects Works Provider.
It has been provided Lot of Guidance for Thousands of Students & made them more beneficial in all Technology Training.
Dot Net
DOTNET Project Domain list 2015
1. IEEE based on datamining and knowledge engineering
2. IEEE based on mobile computing
3. IEEE based on networking
4. IEEE based on Image processing
5. IEEE based on Multimedia
6. IEEE based on Network security
7. IEEE based on parallel and distributed systems
Java Project Domain list 2015
1. IEEE based on datamining and knowledge engineering
2. IEEE based on mobile computing
3. IEEE based on networking
4. IEEE based on Image processing
5. IEEE based on Multimedia
6. IEEE based on Network security
7. IEEE based on parallel and distributed systems
ECE IEEE Projects 2015
1. Matlab project
2. Ns2 project
3. Embedded project
4. Robotics project
Eligibility
Final Year students of
1. BSc (C.S)
2. BCA/B.E(C.S)
3. B.Tech IT
4. BE (C.S)
5. MSc (C.S)
6. MSc (IT)
7. MCA
8. MS (IT)
9. ME(ALL)
10. BE(ECE)(EEE)(E&I)
TECHNOLOGY USED AND FOR TRAINING IN
1. DOT NET
2. C sharp
3. ASP
4. VB
5. SQL SERVER
6. JAVA
7. J2EE
8. STRINGS
9. ORACLE
10. VB dotNET
11. EMBEDDED
12. MAT LAB
13. LAB VIEW
14. Multi Sim
CONTACT US
1 CRORE PROJECTS
Door No: 214/215,2nd Floor,
No. 172, Raahat Plaza, (Shopping Mall) ,Arcot Road, Vadapalani, Chennai,
Tamin Nadu, INDIA - 600 026
Email id: 1croreprojects@gmail.com
website:1croreprojects.com
Phone : +91 97518 00789 / +91 72999 51536
Similar to Software testing defect prediction model a practical approach (20)
Mechanical properties of hybrid fiber reinforced concrete for pavementseSAT Journals
Abstract
The effect of addition of mono fibers and hybrid fibers on the mechanical properties of concrete mixture is studied in the present
investigation. Steel fibers of 1% and polypropylene fibers 0.036% were added individually to the concrete mixture as mono fibers and
then they were added together to form a hybrid fiber reinforced concrete. Mechanical properties such as compressive, split tensile and
flexural strength were determined. The results show that hybrid fibers improve the compressive strength marginally as compared to
mono fibers. Whereas, hybridization improves split tensile strength and flexural strength noticeably.
Keywords:-Hybridization, mono fibers, steel fiber, polypropylene fiber, Improvement in mechanical properties.
Material management in construction – a case studyeSAT Journals
Abstract
The objective of the present study is to understand about all the problems occurring in the company because of improper application
of material management. In construction project operation, often there is a project cost variance in terms of the material, equipments,
manpower, subcontractor, overhead cost, and general condition. Material is the main component in construction projects. Therefore,
if the material management is not properly managed it will create a project cost variance. Project cost can be controlled by taking
corrective actions towards the cost variance. Therefore a methodology is used to diagnose and evaluate the procurement process
involved in material management and launch a continuous improvement was developed and applied. A thorough study was carried
out along with study of cases, surveys and interviews to professionals involved in this area. As a result, a methodology for diagnosis
and improvement was proposed and tested in selected projects. The results obtained show that the main problem of procurement is
related to schedule delays and lack of specified quality for the project. To prevent this situation it is often necessary to dedicate
important resources like money, personnel, time, etc. To monitor and control the process. A great potential for improvement was
detected if state of the art technologies such as, electronic mail, electronic data interchange (EDI), and analysis were applied to the
procurement process. These helped to eliminate the root causes for many types of problems that were detected.
Managing drought short term strategies in semi arid regions a case studyeSAT Journals
Abstract
Drought management needs multidisciplinary action. Interdisciplinary efforts among the experts in various fields of the droughts
prone areas are helpful to achieve tangible and permanent solution for this recurring problem. The Gulbarga district having the total
area around 16, 240 sq.km, and accounts 8.45 per cent of the Karnataka state area. The district has been situated with latitude 17º 19'
60" North and longitude of 76 º 49' 60" east. The district is situated entirely on the Deccan plateau positioned at a height of 300 to
750 m above MSL. Sub-tropical, semi-arid type is one among the drought prone districts of Karnataka State. The drought
management is very important for a district like Gulbarga. In this paper various short term strategies are discussed to mitigate the
drought condition in the district.
Keywords: Drought, South-West monsoon, Semi-Arid, Rainfall, Strategies etc.
Life cycle cost analysis of overlay for an urban road in bangaloreeSAT Journals
Abstract
Pavements are subjected to severe condition of stresses and weathering effects from the day they are constructed and opened to traffic
mainly due to its fatigue behavior and environmental effects. Therefore, pavement rehabilitation is one of the most important
components of entire road systems. This paper highlights the design of concrete pavement with added mono fibers like polypropylene,
steel and hybrid fibres for a widened portion of existing concrete pavement and various overlay alternatives for an existing
bituminous pavement in an urban road in Bangalore. Along with this, Life cycle cost analyses at these sections are done by Net
Present Value (NPV) method to identify the most feasible option. The results show that though the initial cost of construction of
concrete overlay is high, over a period of time it prove to be better than the bituminous overlay considering the whole life cycle cost.
The economic analysis also indicates that, out of the three fibre options, hybrid reinforced concrete would be economical without
compromising the performance of the pavement.
Keywords: - Fatigue, Life cycle cost analysis, Net Present Value method, Overlay, Rehabilitation
Laboratory studies of dense bituminous mixes ii with reclaimed asphalt materialseSAT Journals
Abstract
The issue of growing demand on our nation’s roadways over that past couple of decades, decreasing budgetary funds, and the need to
provide a safe, efficient, and cost effective roadway system has led to a dramatic increase in the need to rehabilitate our existing
pavements and the issue of building sustainable road infrastructure in India. With these emergency of the mentioned needs and this
are today’s burning issue and has become the purpose of the study.
In the present study, the samples of existing bituminous layer materials were collected from NH-48(Devahalli to Hassan) site.The
mixtures were designed by Marshall Method as per Asphalt institute (MS-II) at 20% and 30% Reclaimed Asphalt Pavement (RAP).
RAP material was blended with virgin aggregate such that all specimens tested for the, Dense Bituminous Macadam-II (DBM-II)
gradation as per Ministry of Roads, Transport, and Highways (MoRT&H) and cost analysis were carried out to know the economics.
Laboratory results and analysis showed the use of recycled materials showed significant variability in Marshall Stability, and the
variability increased with the increase in RAP content. The saving can be realized from utilization of recycled materials as per the
methodology, the reduction in the total cost is 19%, 30%, comparing with the virgin mixes.
Keywords: Reclaimed Asphalt Pavement, Marshall Stability, MS-II, Dense Bituminous Macadam-II
Laboratory investigation of expansive soil stabilized with natural inorganic ...eSAT Journals
Abstract
Soil stabilization has proven to be one of the oldest techniques to improve the soil properties. Literature review conducted revealed
that uses of natural inorganic stabilizers are found to be one of the best options for soil stabilization. In this regard an attempt has
been made to evaluate the influence of RBI-81 stabilizer on properties of black cotton soil through laboratory investigations. Black
cotton soil with varying percentages of RBI-81 viz., 0, 0.5, 1, 1.5, 2, and 2.5 percent were studied for moisture density relationships
and strength behaviour of soils. Also the effect of curing period was evaluated as literature review clearly emphasized the strength
gain of soils stabilized with RBI-81 over a period of time. The results obtained shows that the unconfined compressive strength of
specimens treated with RBI-81 increased approximately by 250% for a curing period of 28 days as compared to virgin soil. Further
the CBR value improved approximately by 400%. The studies indicated an increasing trend for soil strength behaviour with
increasing percentage of RBI-81 suggesting its potential applications in soil stabilization.
Influence of reinforcement on the behavior of hollow concrete block masonry p...eSAT Journals
Abstract
Reinforced masonry was developed to exploit the strength potential of masonry and to solve its lack of tensile strength. Experimental
and analytical studies have been carried out to investigate the effect of reinforcement on the behavior of hollow concrete block
masonry prisms under compression and to predict ultimate failure compressive strength. In the numerical program, three dimensional
non-linear finite elements (FE) model based on the micro-modeling approach is developed for both unreinforced and reinforced
masonry prisms using ANSYS (14.5). The proposed FE model uses multi-linear stress-strain relationships to model the non-linear
behavior of hollow concrete block, mortar, and grout. Willam-Warnke’s five parameter failure theory has been adopted to model the
failure of masonry materials. The comparison of the numerical and experimental results indicates that the FE models can successfully
capture the highly nonlinear behavior of the physical specimens and accurately predict their strength and failure mechanisms.
Keywords: Structural masonry, Hollow concrete block prism, grout, Compression failure, Finite element method,
Numerical modeling.
Influence of compaction energy on soil stabilized with chemical stabilizereSAT Journals
Abstract
Increase in traffic along with heavier magnitude of wheel loads cause rapid deterioration in pavements. There is a need to improve
density, strength of soil subgrade and other pavement layers. In this study an attempt is made to improve the properties of locally
available loamy soil using twin approaches viz., i) increasing the compaction of soil and ii) treating the soil with chemical stabilizer.
Laboratory studies are carried out on both untreated and treated soil samples compacted by different compaction efforts. Studies
show that increase in compaction effort results in increase in density of soil. However in soil treated with chemical stabilizer, rate of
increase in density is not significant. The soil treated with chemical stabilizer exhibits improvement in both strength and performance
properties.
Keywords: compaction, density, subgradestabilization, resilient modulus
Geographical information system (gis) for water resources managementeSAT Journals
Abstract
Water resources projects are inherited with overlapping and at times conflicting objectives. These projects are often of varied sizes
ranging from major projects with command areas of millions of hectares to very small projects implemented at the local level. Thus,
in all these projects there is seldom proper coordination which is essential for ensuring collective sustainability.
Integrated watershed development and management is the accepted answer but in turn requires a comprehensive framework that can
enable planning process involving all the stakeholders at different levels and scales is compulsory. Such a unified hydrological
framework is essential to evaluate the cause and effect of all the proposed actions within the drainage basins.
The present paper describes a hydrological framework developed in the form of a Hydrologic Information System (HIS) which is
intended to meet the specific information needs of the various line departments of a typical State connected with water related aspects.
The HIS consist of a hydrologic information database coupled with tools for collating primary and secondary data and tools for
analyzing and visualizing the data and information. The HIS also incorporates hydrological model base for indirect assessment of
various entities of water balance in space and time. The framework would be maintained and updated to reflect fully the most
accurate ground truth data and the infrastructure requirements for planning and management.
Keywords: Hydrological Information System (HIS); WebGIS; Data Model; Web Mapping Services
Forest type mapping of bidar forest division, karnataka using geoinformatics ...eSAT Journals
Abstract
The study demonstrate the potentiality of satellite remote sensing technique for the generation of baseline information on forest types
including tree plantation details in Bidar forest division, Karnataka covering an area of 5814.60Sq.Kms. The Total Area of Bidar
forest division is 5814Sq.Kms analysis of the satellite data in the study area reveals that about 84% of the total area is Covered by
crop land, 1.778% of the area is covered by dry deciduous forest, 1.38 % of mixed plantation, which is very threatening to the
environmental stability of the forest, future plantation site has been mapped. With the use of latest Geo-informatics technology proper
and exact condition of the trees can be observed and necessary precautions can be taken for future plantation works in an appropriate
manner
Keywords:-RS, GIS, GPS, Forest Type, Tree Plantation
Factors influencing compressive strength of geopolymer concreteeSAT Journals
Abstract
To study effects of several factors on the properties of fly ash based geopolymer concrete on the compressive strength and also the
cost comparison with the normal concrete. The test variables were molarities of sodium hydroxide(NaOH) 8M,14M and 16M, ratio of
NaOH to sodium silicate (Na2SiO3) 1, 1.5, 2 and 2.5, alkaline liquid to fly ash ratio 0.35 and 0.40 and replacement of water in
Na2SiO3 solution by 10%, 20% and 30% were used in the present study. The test results indicated that the highest compressive
strength 54 MPa was observed for 16M of NaOH, ratio of NaOH to Na2SiO3 2.5 and alkaline liquid to fly ash ratio of 0.35. Lowest
compressive strength of 27 MPa was observed for 8M of NaOH, ratio of NaOH to Na2SiO3 is 1 and alkaline liquid to fly ash ratio of
0.40. Alkaline liquid to fly ash ratio of 0.35, water replacement of 10% and 30% for 8 and 16 molarity of NaOH and has resulted in
compressive strength of 36 MPa and 20 MPa respectively. Superplasticiser dosage of 2 % by weight of fly ash has given higher
strength in all cases.
Keywords: compressive strength, alkaline liquid, fly ash
Experimental investigation on circular hollow steel columns in filled with li...eSAT Journals
Abstract
Composite Circular hollow Steel tubes with and without GFRP infill for three different grades of Light weight concrete are tested for
ultimate load capacity and axial shortening , under Cyclic loading. Steel tubes are compared for different lengths, cross sections and
thickness. Specimens were tested separately after adopting Taguchi’s L9 (Latin Squares) Orthogonal array in order to save the initial
experimental cost on number of specimens and experimental duration. Analysis was carried out using ANN (Artificial Neural
Network) technique with the assistance of Mini Tab- a statistical soft tool. Comparison for predicted, experimental & ANN output is
obtained from linear regression plots. From this research study, it can be concluded that *Cross sectional area of steel tube has most
significant effect on ultimate load carrying capacity, *as length of steel tube increased- load carrying capacity decreased & *ANN
modeling predicted acceptable results. Thus ANN tool can be utilized for predicting ultimate load carrying capacity for composite
columns.
Keywords: Light weight concrete, GFRP, Artificial Neural Network, Linear Regression, Back propagation, orthogonal
Array, Latin Squares
Experimental behavior of circular hsscfrc filled steel tubular columns under ...eSAT Journals
Abstract
This paper presents an outlook on experimental behavior and a comparison with predicted formula on the behaviour of circular
concentrically loaded self-consolidating fibre reinforced concrete filled steel tube columns (HSSCFRC). Forty-five specimens were
tested. The main parameters varied in the tests are: (1) percentage of fiber (2) tube diameter or width to wall thickness ratio (D/t
from 15 to 25) (3) L/d ratio from 2.97 to 7.04 the results from these predictions were compared with the experimental data. The
experimental results) were also validated in this study.
Keywords: Self-compacting concrete; Concrete-filled steel tube; axial load behavior; Ultimate capacity.
Evaluation of punching shear in flat slabseSAT Journals
Abstract
Flat-slab construction has been widely used in construction today because of many advantages that it offers. The basic philosophy in
the design of flat slab is to consider only gravity forces; this method ignores the effect of punching shear due to unbalanced moments
at the slab column junction which is critical. An attempt has been made to generate generalized design sheets which accounts both
punching shear due to gravity loads and unbalanced moments for cases (a) interior column; (b) edge column (bending perpendicular
to shorter edge); (c) edge column (bending parallel to shorter edge); (d) corner column. These design sheets are prepared as per
codal provisions of IS 456-2000. These design sheets will be helpful in calculating the shear reinforcement to be provided at the
critical section which is ignored in many design offices. Apart from its usefulness in evaluating punching shear and the necessary
shear reinforcement, the design sheets developed will enable the designer to fix the depth of flat slab during the initial phase of the
design.
Keywords: Flat slabs, punching shear, unbalanced moment.
Evaluation of performance of intake tower dam for recent earthquake in indiaeSAT Journals
Abstract
Intake towers are typically tall, hollow, reinforced concrete structures and form entrance to reservoir outlet works. A parametric
study on dynamic behavior of circular cylindrical towers can be carried out to study the effect of depth of submergence, wall thickness
and slenderness ratio, and also effect on tower considering dynamic analysis for time history function of different soil condition and
by Goyal and Chopra accounting interaction effects of added hydrodynamic mass of surrounding and inside water in intake tower of
dam
Key words: Hydrodynamic mass, Depth of submergence, Reservoir, Time history analysis,
Evaluation of operational efficiency of urban road network using travel time ...eSAT Journals
Abstract
Efficiency of the road network system is analyzed by travel time reliability measures. The study overlooks on an important measure of
travel time reliability and prioritizing Tiruchirappalli road network. Traffic volume and travel time were collected using license plate
matching method. Travel time measures were estimated from average travel time and 95th travel time. Effect of non-motorized vehicle
on efficiency of road system was evaluated. Relation between buffer time index and traffic volume was created. Travel time model has
been developed and travel time measure was validated. Then service quality of road sections in network were graded based on
travel time reliability measures.
Keywords: Buffer Time Index (BTI); Average Travel Time (ATT); Travel Time Reliability (TTR); Buffer Time (BT).
Estimation of surface runoff in nallur amanikere watershed using scs cn methodeSAT Journals
Abstract
The development of watershed aims at productive utilization of all the available natural resources in the entire area extending from
ridge line to stream outlet. The per capita availability of land for cultivation has been decreasing over the years. Therefore, water and
the related land resources must be developed, utilized and managed in an integrated and comprehensive manner. Remote sensing and
GIS techniques are being increasingly used for planning, management and development of natural resources. The study area, Nallur
Amanikere watershed geographically lies between 110 38’ and 110 52’ N latitude and 760 30’ and 760 50’ E longitude with an area of
415.68 Sq. km. The thematic layers such as land use/land cover and soil maps were derived from remotely sensed data and overlayed
through ArcGIS software to assign the curve number on polygon wise. The daily rainfall data of six rain gauge stations in and around
the watershed (2001-2011) was used to estimate the daily runoff from the watershed using Soil Conservation Service - Curve Number
(SCS-CN) method. The runoff estimated from the SCS-CN model was then used to know the variation of runoff potential with different
land use/land cover and with different soil conditions.
Keywords: Watershed, Nallur watershed, Surface runoff, Rainfall-Runoff, SCS-CN, Remote Sensing, GIS.
Estimation of morphometric parameters and runoff using rs & gis techniqueseSAT Journals
Abstract
Land and water are the two vital natural resources, the optimal management of these resources with minimum adverse environmental
impact are essential not only for sustainable development but also for human survival. Satellite remote sensing with geographic
information system has a pragmatic approach to map and generate spatial input layers of predicting response behavior and yield of
watershed. Hence, in the present study an attempt has been made to understand the hydrological process of the catchment at the
watershed level by drawing the inferences from moprhometric analysis and runoff. The study area chosen for the present study is
Yagachi catchment situated in Chickamaglur and Hassan district lies geographically at a longitude 75⁰52’08.77”E and
13⁰10’50.77”N latitude. It covers an area of 559.493 Sq.km. Morphometric analysis is carried out to estimate morphometric
parameters at Micro-watershed to understand the hydrological response of the catchment at the Micro-watershed level. Daily runoff
is estimated using USDA SCS curve number model for a period of 10 years from 2001 to 2010. The rainfall runoff relationship of the
study shows there is a positive correlation.
Keywords: morphometric analysis, runoff, remote sensing and GIS, SCS - method
-
Effect of variation of plastic hinge length on the results of non linear anal...eSAT Journals
Abstract The nonlinear Static procedure also well known as pushover analysis is method where in monotonically increasing loads are applied to the structure till the structure is unable to resist any further load. It is a popular tool for seismic performance evaluation of existing and new structures. In literature lot of research has been carried out on conventional pushover analysis and after knowing deficiency efforts have been made to improve it. But actual test results to verify the analytically obtained pushover results are rarely available. It has been found that some amount of variation is always expected to exist in seismic demand prediction of pushover analysis. Initial study is carried out by considering user defined hinge properties and default hinge length. Attempt is being made to assess the variation of pushover analysis results by considering user defined hinge properties and various hinge length formulations available in literature and results compared with experimentally obtained results based on test carried out on a G+2 storied RCC framed structure. For the present study two geometric models viz bare frame and rigid frame model is considered and it is found that the results of pushover analysis are very sensitive to geometric model and hinge length adopted. Keywords: Pushover analysis, Base shear, Displacement, hinge length, moment curvature analysis
Effect of use of recycled materials on indirect tensile strength of asphalt c...eSAT Journals
Abstract
Depletion of natural resources and aggregate quarries for the road construction is a serious problem to procure materials. Hence
recycling or reuse of material is beneficial. On emphasizing development in sustainable construction in the present era, recycling of
asphalt pavements is one of the effective and proven rehabilitation processes. For the laboratory investigations reclaimed asphalt
pavement (RAP) from NH-4 and crumb rubber modified binder (CRMB-55) was used. Foundry waste was used as a replacement to
conventional filler. Laboratory tests were conducted on asphalt concrete mixes with 30, 40, 50, and 60 percent replacement with RAP.
These test results were compared with conventional mixes and asphalt concrete mixes with complete binder extracted RAP
aggregates. Mix design was carried out by Marshall Method. The Marshall Tests indicated highest stability values for asphalt
concrete (AC) mixes with 60% RAP. The optimum binder content (OBC) decreased with increased in RAP in AC mixes. The Indirect
Tensile Strength (ITS) for AC mixes with RAP also was found to be higher when compared to conventional AC mixes at 300C.
Keywords: Reclaimed asphalt pavement, Foundry waste, Recycling, Marshall Stability, Indirect tensile strength.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Cosmetic shop management system project report.pdf
Software testing defect prediction model a practical approach
1. IJRET: International Journal of Research in Engineering and Technology ISSN: 2319-1163
__________________________________________________________________________________________
Volume: 02 Issue: 05 | May-2013, Available @ http://www.ijret.org 741
SOFTWARE TESTING DEFECT PREDICTION MODEL-A PRACTICAL
APPROACH
Shaik Nafeez Umar
Lead-Industry Consultant, CSC Company, Hyderabad, Andhra Pradesh, India
nshaik5@csc.com, nafishaik123@gmail.com
Abstract
Software defects prediction aims to reduce software testing efforts by guiding the testers through the defect classification of software
systems. Defect predictors are widely used in many organizations to predict software defects in order to save time, improve quality,
testing and for better planning of the resources to meet the timelines. The application of statistical software testing defect prediction
model in a real life setting is extremely difficult because it requires more number of data variables and metrics and also historical
defect data to predict the next releases or new similar type of projects. This paper explains our statistical model, how it will accurately
predict the defects for upcoming software releases or projects. We have used 20 past release data points of software project, 5
parameters and build a model by applying descriptive statistics, correlation and multiple linear regression models with 95%
confidence intervals (CI). In this appropriate multiple linear regression model the R-square value was 0.91 and its Standard Error is
5.90%. The Software testing defect prediction model is now being used to predict defects at various testing projects and operational
releases. We have found 90.76% precision between actual and predicted defects.
Index Terms: Software defects, SDLC, STLC, Multiple Linear Regression
--------------------------------------------------------------------***--------------------------------------------------------------------------
1. INTRODUCTION
In the past thirty years, many software defect prediction
models have been developed. In the software
testing/development organization, a need for release/project
wise better defect prediction models. Predicting the defects in
testing projects is a big challenge. Software development
organizations have been working on making good plans to
achieve better development, maintenance and management
processes by predicting the defects. Companies spend huge
amount of money in allocating resources to testing the
software systems in order to find the defects. If we can have a
model to predict the defects in the release/project, the schedule
variance can be minimized and can be received excellent
customer satisfaction. Evaluation of many software models
were presented in [1, 2, 3 and 27]. Statistical based models of
software defects are little help to a Project Manager who must
decide between these alternatives [4].
Software defects are more costly if discovered and fixed in the
later stages of the testing and development life cycles or
during the production [5]. Consequently, testing is one of the
most critical and time consuming phase of the software
development life cycle and accounts for 50% of the total cost
of development [5]. Defect predictors improve the efficiency
of the testing phase in addition to helping developers evaluate
the quality and defect proneness of their software product [6].
They can also help managers in allocating resources,
rescheduling, training plans and budget allocations. Most
defect prediction models combine well known methodologies
and algorithms such as statistical techniques [7, 8 and 9] and
machine learning [10, 11, 12 and 13] they require historical
data in terms of software metrics and actual defect rates, and
combine these metrics and defect information as training data
to learn which modules seem to be defect prone.
Recent research on defect prediction shows that AI based
defect predictors can detect 70% of all defects in a software
system on average [14], while manual code reviews can detect
between 35 to 60% of defects [15] and inspections can detect
30% of defects at the most [16]. A number of authors, for
example [17, 18 and 19] have newly used Bayesian Networks
models in software engineering management. Bayesian
Networks models can useful to predict number of software
defects remaining undetected after testing [20], this can be
used project managers in particularly help to decide when to
stop testing and release software, trading-off the time for
additional testing against the likely benefit.
2. OBJECTIVE AND METHODOLOGY
Defect prediction improves efficiency of the testing phase
in addition to helping developers evaluate the quality and
defect proneness of their software product.
Help managers in allocating resources, rescheduling,
training plans and budget allocations.
Depending on the forecasted trends:
o Resources can be efficiently ramped up or down
o Gaps in Skills and trainings can be plugged
Predicts defect leakage into production.
2. IJRET: International Journal of Research in Engineering and Technology ISSN: 2319-1163
__________________________________________________________________________________________
Volume: 02 Issue: 05 | May-2013, Available @ http://www.ijret.org 742
3. OBJECTIVE AND METHODOLOGY
The objective of this paper is to predict software testing
defects using statistical models and evaluate the accuracy of
the statistical defect prediction model. To determine potential
of the statistical models to capture the number of defects on
the basis of past data and their metrics, we proceed as follows.
To identify the best predictors in the available set of 18
parameters, we calculate product moment correlation between
the number of defects and the predictors. Then we proceed
with more advanced statistical models to deal with normal
distribution of the target variable and the specifics of the
historical data and check multicollinerity within predictor
parameters.
The key variables we analyzed were the descriptive
parameters of target variable. As a result for the analysis, we
used a dataset of 20 software releases which is correlated with
among the influence variables. The parameters of the
generalized Multiple Linear Regression are first estimated
using the method of ordinal least squares (OLS). The
application of the OLS method for fitting the parameters of the
generalized linear regression model is justified if error
distribution is assumed to be normal. In this case OLS and the
maximum likelihood (ML) estimates of β are very close the
same for the linear model [21 and 27]. We use Multiple Linear
Regression (MLR) for the estimation of the defect using the
five predictors with correlation coefficients. In the predictive
modeling, the multiple regression models are used for
predicting defects in software field.
Y=β0+ β1X1+ β2 X2+ β3 X3+ β4 X4+………………..+ βn
Xn,
Where Y=Dependent parameter (Defects),
β1, β2, β3, β4,……. βn Coefficient values and X1, X1, X1,
X1,…. X1 are independent parameters (Total number of test
cases executed, Test team size, Allocated development effort,
Test case execution effort and Total number of components
delivered)
4. RESULTS AND DISCUSSION
Out of total 20 software data items, we have identified total
number of Test Cases executed, Test Team size, Allocated
Unit testing effort, Test case execution Effort and Total
numbers of components delivered are independent variables
and number of defects as dependent variable. We have
identified dependent variables based on the past data and
experience. We have been observing the same pattern in many
of our projects. Total number of defects depends on total
number of test cases and is directly proportional. If number of
test cases are high and critical to requirements the chances are
getting defects is high. This is one of the strongly influencing
parameter. There is strong correlation between these two
parameters. Number of defects in the software release/project
is directly proportional to Test team size. If test team size is
more, then probability of getting defects is high. Number of
defects in the software release/project is indirectly
proportional to allocated unit testing effort. If the allocated
unit testing effort is more, then developers will be able to find
more number of defects in the unit testing phase only and
leakage of the defects to the next phase will be minimized.
This is one of the strong parameter negatively influencing on
the number of defects. If the allocated unit testing effort is less
then probability of getting defects are very high in the testing
phase. Number of defects in the software release/project is
directly proportional to test case execution effort. If the test
case execution effort is more, then probability of getting
defects is high. Number of defects in the software
release/project is directly proportional to total number of
components delivered. If the total number of components
delivered is more, then probabilities of getting defects are
high.
In literature, various authors have also used other type of
metrics like KLOC for prediction model, while this for simple
liner regression [14]. It was strongly associated between
defects. Of the 20 releases, the mean defects were 28 and its
standard deviation is 16 while the mean total number of test
cases executed 264. The proportion of test cases executed and
defects rate are 9:1. The average allocated unit testing effort
was 433 and SD is 226, correlation coefficient a value is
0.2441, it is not significant at 0.05 levels. It means it was no
associated with number of defects. Product moment
correlation coefficient is most widely used for calculating
correlations and its significance level, except it assumes
normality in the distribution of analyzed variables. As our
statistical predictive model variables were clearly normally
distributed. There is highly significant difference between
defect and test team size, it was 0.7665(p<0.01) and next
followed by total number of components delivered i.e. 0.6485
(p<0.01) [table 1].
The coefficient values of multiple linear regressions presents β
values were positive and negative and low its standard errors
i.e. Total number of test cases executed, test team size,
allocated unit testing effort, test case execution effort and total
number of components. We observed test team size only
significantly at 0.05 levels [table 2].
It seems to graphical representation of actual and estimated
defects, R1 and R2 releases were vary from actual and
estimated defects. While next to continued R3 to R15 were
same pattern, it was no variation among the trend lines. In the
statistical defect prediction model shows next five releases
data point to be predicted and it will be given number of
defects bases on release requirements [graph 1].
We used Analysis of variance (ANOVA) for good fit of model
also its r-square, the predictive model coefficient of
determination is 0.91, and it means 91% of the variation in
defects is associated with number of predictors. The F-ratio is
3. IJRET: International Journal of Research in Engineering and Technology ISSN: 2319-1163
__________________________________________________________________________________________
Volume: 02 Issue: 05 | May-2013, Available @ http://www.ijret.org 743
26.37 (p<0.01) which is highly significant at 0.01 levels.
Finally the standard error (SE) was 5.90% it is very low error
in this prediction model. In this model we compare the actual
defects and estimated defects, both of the same patterns and its
precision was 90.76%. We used error analysis for validation of
the model. We assumed that the errors followed by normality
and mean and variance are constant.
CONCLUSION
We analyzed an extensive historical dataset of software
releases to identify factors influencing parameters of defect
prediction model. We found strong correlation between
defects and test team size, total number of test cases executed,
total number of components delivered. In this analysis we use
multiple regression analysis for estimating software defects.
These models is account for the typical problems for
identifying and influence parameters as well as metrics data,
such as inconsistent and heterogeneity of data. Overall these
models indicate good prediction for upcoming software
defects as well as quality improvement. By using the
predictive model identified project manager’s key parameters
that require controlling and improve both the development and
testing process. The R-square value was 0.91 (91%) which is
highly significant at 0.01 level and low standard error (SE)
was 5.90%.
We calibrated our model based on its prediction accuracy and
discovered that it is possible to detect on 84% of number of
defectives using a defect predictors.
We will continue this work by:
Extending the analysis by analyzing the impact of
different combinations of factors on proportion of defect
types.
Extending the model to predict the Defect Severity Index
(DSI).
Extending the model to predict the defect leakage into the
production or next phases.
Extending the model to take a decision like GO or No-GO
into the production.
Extending the model with the results of newer analysis
using advanced statistical models.
Validating the model against historical data and
assumptions in software engineering.
Table 1 Illustrates the descriptive statistics like mean and
standard deviation values of final model parameters.
Table 2 significant values of Multiple Linear Regression
(MLR)
Parameter Mean
Standard
Deviation
(SD)
Correlation
p-
value
Total
number of
Test Cases
executed (#)
264 169 0.5425 p<0.05
Test Team
size (#)
10 4 0.7665 p<0.01
Allocated
Unit testing
effort (Hrs)
433 226 0.2441 p>0.05
Test case
execution
Effort (Hrs)
252 188 0.0593 p>0.01
Total
number of
components
delivered (#)
11 11 0.6485 p<0.01
Number of
defects (#)
28 16 - -
Multiple Linear
Regression (MLR)
Coefficients
values
Standard
Error
(SE)
Significant
P-value
Intercept -5.36813 5.641756 p>0.05
Total number of Test
Cases executed (#) 0.019694 0.013713 p>0.05
Test Team size (#) 6.238706 0.91904 p<0.01
Allocated Unit
testing effort (%) -0.02611 0.007791 p<0.01
Test case execution
Effort (%) -0.07895 0.013876 p<0.01
Total number of
components delivered
(#) -0.15725 0.324758 p>0.05
4. IJRET: International Journal of Research in Engineering and Technology ISSN: 2319-1163
__________________________________________________________________________________________
Volume: 02 Issue: 05 | May-2013, Available @ http://www.ijret.org 744
Graph 1 Trend pattern of Actual and estimated software
defects
ACKNOWLEDGEMENT
I want to thank Narendra singh Rajput, Lead Associate
Manager, for his valuable feedback and guidance and Prof
Balasiddamuni, Department of Statistics, S V University,
Tirupati and Raghav Beeram, Global Head - Test
Management Consulting, Independent Testing Services, CSC,
Hyderabad for guiding me and supporting me in my research
paper.
I would like to express my love affection to my mother Smt.
Shaik Zaibunnisa, My Father Sri. Late S. Mahaboob Basha,
Brothers and Sisters, My spouse Ballary Ameen, Children’s
Shaik Mohammed Wafeeq, Shaik Waneeya, my Niece
Samreen Aaleia for enthusing me throughout the work
REFERENCES
[1] M. Boraso, C. Montangero, and H. Sedehi, “Software cost
estimation: An experimental study of model performances,”
tech. report, 1996.
[2] T. Menzies, D. Port, Z. Chen, J. Hihn, and S. Stukes,
“Validation methods for calibrating software effort models,”
in ICSE ’05: Proceedings of the 27th international conference
on Software engineering, (New York, NY, USA), pp. 587–
595, ACM Press, 2005.
[3] O. Benediktsson, D. Dalcher, K. Reed, and M. Woodman,
“COCOMO based effort estimation for iterative and
incremental software development,” Software Quality Journal,
vol. 11, pp. 265–281, 2003.
[4] Fenton, N. E. and Neil, M. A Critique of Software Defect
Prediction Models, IEEE Transactions on Software
Engineering, 25(5), 675-689, 1999.
[5] Brooks, A. The Mythical Man-Month: Essays on Software
Engineering. Addison-Wesley. Eds. 1995.
[6] Neil, M., Krause, P., Fenton, N. E., Software Quality
Prediction Using Bayesian Networks in Software Engineering
with Computational Intelligence, (Ed Khoshgoftaar TM),
Kluwer, ISBN 1-4020-7427-1, Chapter 6, 2003.
[7] Nagappan.N., Ball, T., Murphy, B. Using Historical In
Process and Product Metrics for Early Estimation of Software
Failures, In Proceedings of the International Symposium on
Software Reliability Engineering. NC. 2006.
[8] Ostrand. T.J., Weyuker E.J., Bell, R.M Predicting the
Location and Number of Faults in Large Software Systems,
IEEE Transactions on Software Engineering (31), 4:340-355,
2005.
[9] Zimmermann, T., Weisgerber, P., Diehl, S., Zeller, A.
Mining version histories to guide software changes. In
proceedings of the 26th International Conference on software
Engineering, 563-572, IEEE Computer Society, DC, USA,
2004.
[10] Munson, J.C., Khoshgoftaar, T.M. The detection of fault-
prone programs. IEEE Transactions on software Engineering
(18), 5: 423-433. 1992.
[11] G. Succi, M. Stefanovic, W. Pedrycz Advanced
Statistical Models for Software Data, Proceedings of the 5th
World Multi-Conference on Systems, Cybernetics and
Informatics, Orlando, Florida, 2003.
[12] Lessmann. S., Basens. B., Mues., C. Pietsch.
Benchmarking Classification Models for Software Defect
Prediction: A Proposed Framework and Novel Findings. IEEE
Transactions on Software Engineering (34), 4: 1-12. 2008.
[13] Moser, R., Pedrycz, W., Succi. G. A comparative analysis
of the efficiency of change metrics and static code attributes
for defect prediction, In Proceedings of the 30th International
Conference on software Engineering, 181-190. 2008.
[14] Menzies, T., Greenwald, J., Frank, A. Data mining static
code attributes to learn defect predictors. IEEE Transactions
on Software Engineering (33), 1: 2-13. 2007.
[15]BogaziciUniversity, http://code.google.com/p/prest/.
Shull, F., Boehm, V.B., Brown, A., Costa, P., Lindvall, M.,
Port, D., Rus, I., Tesoriero, R., and Zelkowitz, M. 2002. What
We Have Learned About Fighting Defects. In Proceedings of
the Eighth International Software Metrics Symposium, 249-
258, 2002.
[16] Fagan, M. Design and Code Inspections to Reduce Errors
in Program Development. IBM Systems Journal (15), 3. 1976.
[17] Bibi, S. and Stamelos, I. Software Process Modeling with
Bayesian Belief Networks In Proceedings of 10th International
Software Metrics Symposium (Metrics2004) 14-16 September
2004, Chicago, USA.
[18] Fan, Chin-Feng, Yu, Yuan-Chang. BBN-based software
project risk management, J Systems Software, 73, 193-203,
2004.
[19] Stamlosa, I., Angelisa, L., Dimoua, P., Sakellaris, P. On
the use of Bayesian belief networks for the prediction of
software productivity Information and Software Tech, 45 (1),
51-60, 2003.
[20] Fenton, N.E., Krause, P., Neil, M., Software
Measurement: Uncertainty and Causal Modeling, IEEE
Software 10(4), 116-122, 2002.
5. IJRET: International Journal of Research in Engineering and Technology ISSN: 2319-1163
__________________________________________________________________________________________
Volume: 02 Issue: 05 | May-2013, Available @ http://www.ijret.org 745
[21] Fenton, N.E. and Neil, M.A Critique of Software Defect
Prediction Models, IEEE Transactions on Software
Engineering, 25(5), 675-689, 1999.
[22] Cameron A.C. and Trivedi P.K. Econometrics models
based on count data: comparisons and applications of some
estimators and tests, Journal of Applied Econometrics, 1, 29-
93, 1986.
[23] Lambert D. Zero-inflated Poisson regression with an
application to defects in manufacturing, Technimetrics, 34, 1-
14, 1990.
[24] Long J.S. Regression Models for Categorical and Limited
Dependent Variables, Advanced Quantitative Techniques in
the social Sciences, No 7, Sage Publications.1997.
[25] Graves T., Karr A.F., Marron J.S., Siy H. Predicting Fault
Incidence Using Software Change History, IEEE Transactions
on Software Engineering, Vol.26, No.& July. 2000.
[26] Stamelosa, I., Angelisa, L., Dimoua, P., Sakellaris, P. On
the use of Bayesian belief networks for the prediction of
software productivity Information and Software Tech, 45 (1),
51-60, 2003.
[27] Nafeez Umar Shaik, Bathineedi Koteswara Rao and
Beeram Raghav, Software defect prediction model: A
statistical approach, Software Testing Conference (STC-
2010), 10th Annual International Software Testing Conference
in India 2010, November, 22-23, Bangalore.
BIOGRAPHIES
Working as Lead Industry Consultant in
Test Management Consulting group,
AppLabs – a Computer Science
Corporation Company, Hyderabad, India.
He has 9 years in IT experience as
Statistician and Statistical modeller. He has
published 14 papers in
National/International journals. He is expert in Statistical and
Econometric modelling