The document outlines the installation process for a wireless NIC, starting with inserting the installation disk and running the setup. It guides the user through selecting the specific model and downloading the driver, with recommendations for file location. After a 2-3 minute installation, the utility is ready for use, and the device will be listed in the network adapters section of the device manager.

1. Software installation
for Wireless NIC
Ajay Jassi

2. Firstly put the
installation
disk into the
DVD/CD drive.

3. Open up the
disk to view
files and click
on the setup.

4. Once the setup
is installed
click on the
specific model.

5. Configure to
install the
driver and
software by
clicking next.

6. Now it will give
a option to
download the
driver or the
driver with the
utility
software.

7. It will allow to
change the file
location, but is
recommended
to keep it in
the C drive
with the OS.

8. The
installation will
take place for
about 2-3
minutes.

9. Once the setup
is complete,
just click finish
and the utility
will popup
ready to
connect.

10. Configuration
utility

11. Now connect
Wi-Fi network
to computer.

12. If you go to
device
manager,
under the tab
network
adapters you
will see that
the device was
detected.

13. The
configuration
utility will also
be in the
notification
bar, for easier
access.