The PME-500-TR represents a breakthrough in the concept of testing, timing and condition-based analysis of medium- and high voltage circuit breakers and combinations with disconnectors.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
MIfa Systems is an Electronic Instrument & Equipment based private company, engaged in offering Digital Temperature Controller with advanced microcomputer including leading-edge sensor, therefore ensuring precise temperature calibrating and controlling operations. Driven by technical excellence,
http://www.mifasystems.com/
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
MIfa Systems is an Electronic Instrument & Equipment based private company, engaged in offering Digital Temperature Controller with advanced microcomputer including leading-edge sensor, therefore ensuring precise temperature calibrating and controlling operations. Driven by technical excellence,
http://www.mifasystems.com/
How to setup ACS Controller and Omron CJ2M PLC EtherNet/IP Configuration StepsTolomatic
This information contains primary steps required to commission the PLC and network configuration for operation of the ACS Drive with the Omron PLC. Drive-side information will be provided by Tolomatic. Common PLC set-up will be identified, but not fully detailed herein.
Electronic Line Break Protector for Fluid SystemsCTi Controltech
Rotork’s ELB (Electronic Line Break) is a robust self-contained electronic pipeline monitoring system designed for use in the gas & oil industry. It will continuously monitor pipeline pressure dynamics to provide early detection of pipeline breaks and initiate automatic valve actuator movement to an emergency position based upon user-defined parameters. The powerful and versatile system can also collect detailed operational data useful for optimising performance and enhancing pipeline safety.
This PPT is based upon my training in Yokogawa Chennai.
Reference:
# Yokogawa Hand Book on CS 3000
# http://www.slideshare.net/bvent2005/dcs-presentation
Introducing the innovative new temperature controller, MAXVU from West Control Solutions.
The MAXVU controller offers fast, reliable temperature control for packaging, textile and food and beverage machine builders on a budget.
MAXVU provides an uniquely large display, clearly visible from a distance and with a wide viewing angle.
The temperature controller has an extremely simple, easy-to-use set up menu, which concentrates on the essential parameters, meaning the controller can be set up in under 60 seconds for most common applications.
Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double walled thick PCRC sheet, duly painted with attractive stove enamel.
How to setup ACS Controller and Omron CJ2M PLC EtherNet/IP Configuration StepsTolomatic
This information contains primary steps required to commission the PLC and network configuration for operation of the ACS Drive with the Omron PLC. Drive-side information will be provided by Tolomatic. Common PLC set-up will be identified, but not fully detailed herein.
Electronic Line Break Protector for Fluid SystemsCTi Controltech
Rotork’s ELB (Electronic Line Break) is a robust self-contained electronic pipeline monitoring system designed for use in the gas & oil industry. It will continuously monitor pipeline pressure dynamics to provide early detection of pipeline breaks and initiate automatic valve actuator movement to an emergency position based upon user-defined parameters. The powerful and versatile system can also collect detailed operational data useful for optimising performance and enhancing pipeline safety.
This PPT is based upon my training in Yokogawa Chennai.
Reference:
# Yokogawa Hand Book on CS 3000
# http://www.slideshare.net/bvent2005/dcs-presentation
Introducing the innovative new temperature controller, MAXVU from West Control Solutions.
The MAXVU controller offers fast, reliable temperature control for packaging, textile and food and beverage machine builders on a budget.
MAXVU provides an uniquely large display, clearly visible from a distance and with a wide viewing angle.
The temperature controller has an extremely simple, easy-to-use set up menu, which concentrates on the essential parameters, meaning the controller can be set up in under 60 seconds for most common applications.
Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double walled thick PCRC sheet, duly painted with attractive stove enamel.
The ONYX Tester is the easiest way to perform complete and accurate testing of any 12/24 V car alternators and starters. This advanced computer technology test bench use a complete and scalable database to make the use simple and intuitive. The Onyx Tester is updated by USB / Internet, in order to include the last recent alternator technologies and references.
For more information, visit the site : www.testmyalternator.com
The Serinus 10 Ozone (O3) analyser delivers precise and reliable performance at excellent value. It uses proven non-dispersive ultraviolet (UV) absorption technology to measure O3 in ambient air (LDL < 0.5 ppb, range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double
walled thick PCRC sheet, duly painted with attractive stove enamel.
Data Teknis Gossen Metrawatt Special Multimeter : METRAHIT PM TECH, METRAHIT PM XTRA, METRAHIT EBASE, METRAHIT ETECH, METRAHIT EXTRA, METRAHIT ESPECIAL, METRAHIT EU PRO
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Stay Ahead of the Competition
Whether you need additional help designing your product for manufacturing, or just an office for you and your team to work out of while in Shenzhen, we’ve got you covered. http://svv.io/basecamp
The Serinus 56 Total Sulfur analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and an external thermal converter to measure TS in ambient air (LDL <0.3ppb, Range 0-10 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
SMC PTE-Range Manual and PC Controlled Relay Test EquipmentErika Herbozo
PTE range a wide series of digital, non-variac based, secondary injection test sets, single and 3-phase, with the required high accuracy and stability for all kind of secondary injection test, reversibility in all output channel (current/voltage), fault dynamic testing, and interconnection capability; portable units, with high power capability, and straightforward use.
PTE-50-CET, PTE-300-V, PTE-50-CE, PTE-50-CE Pro, PTE-100-V
MTO300 Series Automated six-winding transformer ohmmeter-
Automated 8-terminal/6-winding measurement capability, simultaneous winding magnetization, tests operation of on-load tap-changers
Built-in auto-demagnetization feature, automatic discharge power DB software (MTO330)
Available for sales, rentals, hire and lease @ http://www.supremetechnology.com.au/Default.aspx
Pacorr Melt Flow Index tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index
of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a
jet of a particular length and diameter.
The Cloud Point test cell is first flushed through with a fresh sample. A small amount of sample is then isolated in the cell and allowed to settle for a predetermined period to allow any air bubbles or solids to separate. The sample cell is then cooled at a controlled rate by a Peltier cooler with excess heat being removed by a coolant. An optical detector senses when the sample is starting to become cloudy as waxy components start to precipitate. The temperature at which this occurs is taken as the cloud point
In This PPT we are discussed about complete details of that product (Use,Operation, Technical details, Dimensions, Wiring, and etc..)
Please Support us and Follow our other Sites
https://www.instagram.com/controlsandsystems.offical
https://twitter.com/ControlsSystems
https://automationtechplc2.blogspot.com
https://humidificationcontrol.blogspot.com
https://controlsandsystems.business.site
www.controls.systemsdm@gmail.com
If you enjoyed this article, share it with your friends and colleagues
The Serinus 50 Sulfur Dioxide (SO2) analyser delivers precise and reliable performance at excellent value. It uses proven pulsed UV fluorescent radiation technology to measure SO2 in ambient air (LDL <0.3 ppb, Range 0-20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Similar to SMC PME-500-TR Circuit Breaker Analyzer (20)
SMC TriRaptor inyección trifásica en primarioErika Herbozo
Sistema trifásico de pruebas en primario
El TriRaptor es el único sistema realmente portátil del mercado para pruebas con corriente trifásica estabilizada por encima de 3000A. Ha sido diseñado sobre los mismos principios de ergonomía y rendimiento que han hecho popular al sistema Raptor gracias a su sencillo manejo y por poder ser transportado y puesto en funcionamiento por una sola persona.
SMC SMC-12 Sistema de ensayo para pequeños interruptores automáticos pi asErika Herbozo
Sistema automático de pruebas para PIAs
El sistema SMC-12 está compuesto por fuentes de corriente estabilizadas, ordenador de control y medida y software de control (M12-TEST).
SMC Raptor sistema de pruebas de inyección primariaErika Herbozo
Sistema multifuncional de pruebas en primario
El Raptor es un sistema compuesto por una unidad ‘maestra’ o principal y un conjunto de equipos opcionales que permiten abordar prácticamente cualquier trabajo de verificación y puesta en marcha del equipamiento primario de una instalación de media y alta tensión.
SMC PTE-100-C Ensayo de relés de intensidad y tensiónErika Herbozo
Maleta monofásica para prueba de relés CA y CC
Partiendo del potente y compacto PTE-100-C y con un mínimo incremento de peso, estos equipos llevan incorporada en el interior de su tapa una fuente adicional de voltaje totalmente regulable en amplitud, frecuencia y ángulo de fase para probar prácticamente cualquier tipo de relé.
Cronómetro digital de mano
Este cronómetro detecta cambios de estado en contactos normalmente abiertos o cerrados, así como flancos ascendentes o descendentes de tensión hasta 250 V en continua o alterna.
SMC PTE Range Equipos de prueba de relés con control manual y automáticoErika Herbozo
Una amplia oferta de equipos de pruebas de inyección secundaria digitales – sin variac – monofásicos y trifásicos, de uso sencillo y directo, con fuentes reversibles de corriente/tensión de alta potencia, pruebas dinámicas y capacidad de interconexión, con la alta precisión y estabilidad necesaria para todo tipo de pruebas de inyección secundaria.
SMC PME-500-TR Equipo para ensayo de interruptoresErika Herbozo
Analizador de interruptores trifásicos de media y alta tensión
El PME-500-TR es el producto más popular de la familia de instrumentos de medida de EuroSMC. Pequeño, ligero y autónomo gracias a sus baterías recargables, se aprende a utilizar en pocos minutos.
SMC PME-20-PH Medidor digital de angulo de faseErika Herbozo
Medidor digital de ángulo de fase
El PME-20-PH es un equipo diseñado para ser utilizado primordialmente como medidor de ángulo de fase, aunque además mide Frecuencia, factor de potencia y tiene una escala analógica que permite su uso como sincronoscopio.
SMC Prime 600 micro ohmmetro dinámico de 600 aErika Herbozo
El PRIME es una nueva y avanzada generación de micro-óhmetros.
Es el único microóhmetro en el mercado que integra la resistencia de contacto y la medición de resistencia dinámica (DRM) para la evaluación del estado de los contactos en interruptores SF6 y de vacío; el PRIME 600 es un micro óhmetro de alta corriente que proporciona verdadera CC pura con control inteligente hasta 600 A, una amplia gama de medición con alta potencia, proceso de pruebas Dual Ground, impresora térmica, pantalla táctil, modos de prueba predefinidos e informes automáticos.
SMC Mentor 12 Sistema integrado todo en uno para prueba de relésErika Herbozo
Sistema trifásico universal para pruebas de relés de protección
El Mentor 12 es el equipo trifásico más avanzado que existe para pruebas de relés de protección tanto electromecánicos como digitales de todo tipo, en instalaciones tradicionales o basadas en la norma IEC-61850.
Equipo para pruebas de sobre intensidad hasta 2 kA CA
El LET-400-RD está diseñado para realizar la mayoría de los ensayos requeridos durante la puesta en marcha de subestaciones. Permite realizar con suficiente potencia la comprobación de los circuitos de protección, mando y control en su totalidad.
El GooseMeter One es un sencillo pero potente instrumento de mano que perite visualizar de forma instantánea el trafico de mensajes GOOSE en cualquier subestación o instalación dotada de un bus de control según la noma IEC-61850, con solo enchufarlo a una toma RJ-45 de la red local.
The TriRaptor is the only really portable three-phase injector in the market providing stabilized current in the range of 3000 A and beyond. It has been designed with the same ergonomics and performance characteristics found in the popular Raptor System, so it is really easy to use and can be transported by a single person in a regular vehicle.
MCB Test Automation System
The SMC-12 Test system is divided by the following sections:
Stabilized Current Supply
Control and Measuring Computer
Software controls Program (M12TEST)
SMC Raptor Primary Injection Test SystemErika Herbozo
Multifunctional Primary Testing System
The Raptor system consists of a main "master" unit and a number of optional units that enable the execution of virtually and commissioning or routine testing jobs on the primary equipment of medium and high voltage electricity installations.
SMC PTE-100-C Current & Voltage Relay TestingErika Herbozo
A World leader reference single phase secondary injection test set. Since portability is important factor of secondary injection test, the PTE-100-C s the smallest and lightest by far. With outstanding 1000 VA power for up to 250 A, measuremente and testing functions, large set of upgrading options and accessories, accurate and unbeatable fast testing, at competitive price, A must-have instrument for the wide diversity of secondary injection test works in any plant or substation.
PTE-30-CH electrical substation maintenance chronometer.
Handheld 1 ms Digital Chronometer.
This chronometer detects state change in normally open or normally closed contacts, as well as positive or negative changes in voltage up to 250 V (AC of DC)
SMC PME-20-PH Digital Phase Angle MeterErika Herbozo
The PME-20-PH is an instrument designned mainly as a phase angle meter, although other parameters, such as Frequency and Power Factor can be measured. The instrument has an analogic scale that enables it to be used as a synchroscope.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
TOP 10 B TECH COLLEGES IN JAIPUR 2024.pptxnikitacareer3
Looking for the best engineering colleges in Jaipur for 2024?
Check out our list of the top 10 B.Tech colleges to help you make the right choice for your future career!
1) MNIT
2) MANIPAL UNIV
3) LNMIIT
4) NIMS UNIV
5) JECRC
6) VIVEKANANDA GLOBAL UNIV
7) BIT JAIPUR
8) APEX UNIV
9) AMITY UNIV.
10) JNU
TO KNOW MORE ABOUT COLLEGES, FEES AND PLACEMENT, WATCH THE FULL VIDEO GIVEN BELOW ON "TOP 10 B TECH COLLEGES IN JAIPUR"
https://www.youtube.com/watch?v=vSNje0MBh7g
VISIT CAREER MANTRA PORTAL TO KNOW MORE ABOUT COLLEGES/UNIVERSITITES in Jaipur:
https://careermantra.net/colleges/3378/Jaipur/b-tech
Get all the information you need to plan your next steps in your medical career with Career Mantra!
https://careermantra.net/
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Technical Drawings introduction to drawing of prisms
SMC PME-500-TR Circuit Breaker Analyzer
1.
2. 2
PME-500-TR
Circuit Breaker Analyzer
The test results can be viewed, exported or
printed from the computer. The report can be
personalized by adding your corporate logo.
Numerical results display On-screen keyboardGraphical results display
APPLICATIONS
• Simultaneous measurement for the 3 main contacts (open/
closed) and 2 auxiliary contacts, including pre-insertion
resistors (if present in the circuit breaker).
• Evaluates the synchronism between the circuit breaker
poles.
• Determines the maximum currents, opening and closing
times, simultaneously in both coils.
• Evaluates the state of the substation’s auxillary batteries by
graphically showing the coil consumption.
• Immediately displays and prints test results, both
numerically and graphically.
• Automatically calculates the contact resistance in the three
chambers.
• Travel, speed & acceleration analysis with the optional
PME-TCE plug-in module.
DESCRIPTION
The PME-500-TR is an extraordinary forward step in the concept of circuit breaker test equipment, due to
its simple and easy control method. The equipment saves time and improves testing productivity.
The control of the equipment is by a touch screen panel. This allows test parameters to be entered and
gives a visual display of the test results in graphic and numeric format. A built-in thermal printer enables
test results to be printed immediately.
The PME-500-TR can be connected to any AC supply between 100 and 240V. The unit is also powered
by internal rechargeable batteries that provide 10-hour operation time, allowing to work also when no AC
supply is available. The equipment is provided with special test leads that have a multi-pole connector.
Measurement of the contact resistance of each main pole is performed automatically, with a test current
of 10 A and a resolution of 0.1 µΩ.
All connection elements are located on the front panel. The test connection inputs are duplicated, as
the equipment is supplied with special testing cable leads and there are also 4 mm input taps, with
which any other cable can be used. The software EuroBreaker Basic is supplied with the equipment. This
software enables to download, print and export to MS Excel-readable format the test results previously
saved in the unit.
All the features contained in the equipment, such as manual control via the touch screen panel, an
internal battery supply, a built-in printer and having a clear and easy to operate system, make the PME-
500-TR the most advanced equipment within its category to test circuit breakers. The unit is enclosed in
an airtight, IP67-rated waterproof case.
3. 3
Test printout from the
built-in thermal printer
Equipment
with the
standard
accessories
supplied.
PME-RESC
Optional set of fast
measurement clamps
CHARACTERISTICS
• 3 timing inputs for the three main contacts, 0.1 ms
resolution.
• 2 isolated auxiliary binary inputs, with a capacity for dry
contacts or voltage signals up to ±360 V AC/DC, 0.1 ms
resolution.
• Measures and records the Coil currents simultaneously (open
and close), with 1 ms resolution up to 50 A DC (auto range).
• Automatic measurement of the contact resistance, 0,1 µΩ
resolution.
• Stores up to 60 test results in non-volatile FLASH memory.
• Connection to the breaker by means of a special simplified
cable connector or by 4-mm input taps.
• Built-in thermal printer.
• Internal NiMh rechargeable batteries, up to 10 hours duration.
• Programmable operating sequences C, O, C-O, O-C,
C-O-C and O-C-O.
• Immediate graphic display of the test results.
• A large Touch Screen panel for graphical display and
touch-sensitive menu-based control.
• Allows the setup of the test data and test configuration from
the touch screen panel with on-screen touch keyboard.
• Supplied with Windows-compatible software to download test
results to a computer.
• Reduced size and light weight.
PME-TCE
Optional travel, speed and acceleration analysis plug-in module
The PME-TCE extends the PME-500-TR applications by adding contact
travel, speed and acceleration data to the standard circuit breaker
evaluation results. This small interface module communicates with the
PME-500-TR via the built-in PME BUS®, from which it also takes the
necessary power. The whole set of results are permanently stored in its own
non-volatile memory, and then downloaded from a standard computer via
USB, not even needing the main PME-500-TR unit for this purpose. The
PME-TCE features 3 inputs for digital linear or rotary encoders and one
additional input for analogue transducers.
PME-ATK: Rotary Transducer Kit
Full angular measurement kit consisting of
digital angular encoder, articulated arm with
magnetic stand, set of four shaft adapter
bushings and hex key wrench.
PME-ATA: Angular measurement set consisting
of digital angular encoder, 19-mm machineable
shaft adapter bushing, and articulated arm with
magnetic stand.
PME-LT50A: 500-mm Analogue Linear
Transducer.
TRANSDUCERS
Movement sensors and mechanical adapters
Transducers, shaft adapters and articulated arm can also be purchased separately.
CHARACTERISTICS
Digital inputs (3): single-ended TTL, 5 V, 100mA
Analogue input (1): 7.5 V, 10 mA
Data interfaces USB, PME BUS®
Power supply USB, PME BUS® or external adapter
Sampling frequency 5 kHz per channel
Max. recording time 2 seconds
Dimensions 148 x 89 x 25 mm / 5.8” x 3.5” x 0.9”
Weight 192 g / 0.4 lb.
4. 4
INPUTS
MAIN CONTACT INPUTS
Number: 3 inputs + common (ground)
Open circuit voltage: 10 V DC maximum
Testing current: 100 mA maximum
States: Closed (C) (r<30Ω)
Preinsertion ( R ) (30Ω < r < 10kΩ)
Open ( O ) (r>10kΩ)
AUXILIARY INPUTS
Number: 2 isolated binary inputs
Contact mode: Open circuit voltage: 5 V DC
Testing current: 20 mA maximum
Voltage mode: Range: From ±1.5 to ±360 V AC/DC
Low activation mode (Low) ±1.5 V AC/DC
High activation mode (High) ±15 V AC/DC
MEASUREMENTS
Time measurement and graphic representation
RANGES: Selectable between 100 ms, 200 ms,
400 ms, 800 ms and 2000 ms
RESOLUTION: ± 0.1 ms (sampling frequency
of 10 kHz)
Accuracy: ± 0.05% ±0.1 ms
Graphic representation resolution: 0.8 ms per mm
Current measurement and graphic representation
Range: 0 – 50 A DC
Resolution: 0.1 A (sampling frequency of 1 kHz)
Accuracy: 1% of the range ±100 mA
Graphic representation Automatic scale up
resolution: to 50 mA per mm (vertical)
Contact resistance measurement
Ranges: Automatic range selection
from 100.0 µΩ to 1.000 Ω
Resolution: 0.1 µΩ maximum
Accuracy: ± 1% of the range ± 1 digit
Testing current: 10 A DC maximum
TOUCH SCREEN PANEL, PRINTER AND MEMORY
GRAPHIC TOUCH SCREEN
Type: Transflective LCD
Dimensions: 113 x 61 mm / 4.4” x 2.4”
Color: Black and white
Contrast: Adjustable
Illumination: CCFL
BUILT IN PRINTER
Type: Thermal
Paper width: 110 mm (standard) / 4.3”
Maximum diameter of paper roll: 40 mm / 1.5”
MEMORY
Internal memory: Stores up to 60 test results
STANDARD ACCESSORIES INCLUDED
EuroBreaker Basic software for Windows
User’s manual
1 voltage supply cord, Schuko type 2.5 m / 8.2 ft.
1 coil control & measurement cable 5 m* / 16.4 ft.*
1 auxillary input timing & trigger cable 5 m* / 16.4 ft.*
1 three-phase main contact timing test cable 5 m* / 16.4 ft.*
1 three-phase contact resistance measurement
cable 5 m* / 16.4 ft.*
RS-232 communications cable
Lightweight Nylon carrying bag
1 set of spare fuses
2 coil protection diodes
1 set of crocodrile type clamps
2 thermal paper rolls
*Also optionally available in 11-meter length. / 36 ft.
PME-500-TR
TECHNICAL SPECIFICATIONS
EuroSMC, S.A.
Polígono industrial P-29, Calle Buril, 69
28400 Collado Villalba. Madrid (Spain).
Tels: +34 91 849 89 80 Fax: +34 91 851 25 53
www.eurosmc.com e-mail: sales@eurosmc.com
Compliance: IEC-61010 / EMC-50081-2 / EN-50082-2
Voltage supply: 100 to 240 V AC 50-60 Hz
Internal battery: NiMH Type 12 V DC
Normal operating time: 10 hours
Battery recharge time: 4.5 hours
Dimensions (in mm): Heigth: 340/Width: 300/Depth: 150
(in inches): 13.3 11.8 5.9
Weight: 8 kg. - 17.6 lb.
Working temperature: 0º - 55º C
Storage temperature: -40º / +70º C // -40 ºF / 158ºF
Humidity: Up to 95% (non condensating)
Languages incorporated: English, Spanish, French, German, Italian, etc.
DISTRIBUTED BY:
Single command: Close (C), Open (O)
Double: Close-Open (C-O), Open-Close (O-C)
Triple: Close-Open-Close (C-O-C),
Open-Close-Open (O-C-O)
COMMAND DURATION
Close, Open, Interval Between 10 and 2,000 ms
Acquisition start delay Between 0 and 18 s.
ACQUISITION START SIGNAL
Coil operation
Selectable between: Aux1 or aux2 status change
Main contact status change
Programmed DELAY
Pleasenote:DuetothecontinuousresearchanddevelopmentbyEuroSMC,specificationsinthiscatalogmaybechangedwithoutpreviousnotice.HADCCEN-Version5
GENERAL