Riverine passenger vessel overload detedtion and monitoring system
•Download as PPT, PDF•
0 likes•212 views
1) The document proposes a Riverine Passenger Vessel Overload Detection and Wireless Monitoring Scheme to address the problem of overloading in passenger vessels in Bangladesh, which is a major cause of maritime disasters. 2) The proposed system uses a DWT level sensor and data acquisition unit on vessels to detect overloading, along with a mobile app to allow passengers to monitor vessel status. An automatic engine shut off and alarm system would activate if overloading is detected. 3) A feasibility study showed the system could be implemented at a low cost of 5000 BDT per vessel. The system has potential to ensure passenger safety but relies on continuous mobile network and power supply.
Report
Share
Report
Share
Recommended
Autonomous shipping
What will the ship of the future look like? According to proponents of the vision behind autonomous shipping, It will be unmanned, run by artificial intelligence. Learn more about this exciting topic in this video.
For the video please visit https://www.youtube.com/watch?v=L3HQC9B2OO8&list=PLVce3C5Hi9BBfabvhEzYQTQDYEg2vtuxH&index=20
This slideshare has been produced by the Tesseract Academy (http://tesseract.academy), a company that educates decision makers in deep technical topics such as data science, analytics, machine learning and blockchain.
If you are interested in data science and related topics, make sure to also visit The Data Scientist: http://thedatascientist.com.
Automatic Broken Rail Crack Detection Scheme
In India, as the fuel cost continues to rise, railway transport plays an important role. Although there are, so many
options of transportation are available like flights, trains, buses etc but most of the people prefer trains only as it
is cost effective and comfortable way of travelling and hence in today’s world railway becomes the lifeline of
India. When anybody goes through the daily news, they come across many accidents which are related to
railroad. So there must be good railway safety for the people as the rail accidents are often dangerous in terms of
the severity and death etc, when compared with the other transportation. There are several reasons present for
railroad related accidents but the major reason is cracks in rails. It is the main cause of railway derailments and
has the capacity to induce major damage to economy of the world. Therefore more efforts are necessary for
achieving the good rail safety. This system introduced a method for rail crack detection. The proposed system is
LED-LDR and Arduino based rail track detection scheme. It is cost effective and simple way of monitoring the
condition of the rails on a continual basis for the improving the railway safety which consists of GSM module
and Encoder.
Advance Road Safety for Ghat Road’s at Hairpin Bend
This document discusses road safety issues and accidents that occur at hazardous ghat road sections in India. It first introduces the problem of increasing road accidents worldwide and in India, particularly at ghat road sections which have sharp hairpin bends. It then analyzes causes of accidents in ghat road sections like narrow roads, poor visibility around bends, and lack of safety measures. The document proposes using CCTV cameras and LCD screens instead of mirrors to provide drivers visibility around blind corners. This would help drivers see oncoming vehicles and avoid collisions at hazardous bends. Finally, the document concludes that implementing this technique could help reduce accidents and save lives on dangerous ghat road sections.
Iisrt jim isaac
This paper proposes a low-cost system to alert Indian fishermen when they cross maritime boundaries and prevent their boats from illegally entering neighboring countries' waters. The system uses GPS to determine the boat's location and sends alerts when it nears the boundary. It also includes an engine control unit connected to the boat's fuel injector. When the boat crosses into foreign waters, the system cuts off the fuel supply to stop the boat. This allows fishermen to be warned and monitored to prevent smuggling while avoiding high-cost alternatives.
Wireless Reporting System for Accident Detection at Higher Speeds
Speed is one of the basic reasons for vehicle accident. Many lives could have been saved if emergency service
could get accident information and reach in time. Nowadays, GPS has become an integral part of a vehicle
system. This paper proposes to utilize the capability of a GPS receiver to monitor speed of a vehicle and detect
accident basing on monitored speed and send accident location to an Alert Service Center. The GPS will
monitor speed of a vehicle and compare with the previous speed in every second through a Microcontroller
Unit. Whenever the speed will be below the specified speed, it will assume that an accident has occurred. The
system will then send the accident location acquired from the GPS along with the time and the speed by utilizing
the GSM network. This will help to reach the rescue service in time and save the valuable human life.
John Barker - UAVs: Where Are We And What's Next
UAVs: Where Are We And What's Next - John Barker, OSU Extension, from the 2020 Conservation Tillage and Technology Conference, held March 3-4, 2020, Ada, OH, USA.
ICIECA 2014 Paper 04
The document proposes a system to monitor Indian fishermen along the maritime border with Sri Lanka using GPS. A Nokia 6600 mobile phone equipped with GPS would track each fisherman's location and send alerts to the Indian Navy if they cross into Sri Lankan waters, allowing the Navy to warn the fishermen to return. Fishermen's details would be stored in a PostgreSQL database for identification. The system aims to safely guide fishermen and prevent international disputes due to border violations.
Automobile collision avoidance system
The document discusses automobile collision avoidance systems and their importance in increasing road safety. It provides statistics showing the large number of traffic fatalities worldwide each year. It then describes several key collision avoidance technologies such as forward collision warning systems, automatic emergency braking, and lane departure warning. These technologies use sensors and automatic braking to detect hazards and prevent accidents. The document also analyzes patent data, finding growing research interest in forward collision avoidance technology. Major automakers are working to incorporate collision avoidance systems, which could reduce accidents by 20-40% according to some estimates.
Recommended
Autonomous shipping
What will the ship of the future look like? According to proponents of the vision behind autonomous shipping, It will be unmanned, run by artificial intelligence. Learn more about this exciting topic in this video.
For the video please visit https://www.youtube.com/watch?v=L3HQC9B2OO8&list=PLVce3C5Hi9BBfabvhEzYQTQDYEg2vtuxH&index=20
This slideshare has been produced by the Tesseract Academy (http://tesseract.academy), a company that educates decision makers in deep technical topics such as data science, analytics, machine learning and blockchain.
If you are interested in data science and related topics, make sure to also visit The Data Scientist: http://thedatascientist.com.
Automatic Broken Rail Crack Detection Scheme
In India, as the fuel cost continues to rise, railway transport plays an important role. Although there are, so many
options of transportation are available like flights, trains, buses etc but most of the people prefer trains only as it
is cost effective and comfortable way of travelling and hence in today’s world railway becomes the lifeline of
India. When anybody goes through the daily news, they come across many accidents which are related to
railroad. So there must be good railway safety for the people as the rail accidents are often dangerous in terms of
the severity and death etc, when compared with the other transportation. There are several reasons present for
railroad related accidents but the major reason is cracks in rails. It is the main cause of railway derailments and
has the capacity to induce major damage to economy of the world. Therefore more efforts are necessary for
achieving the good rail safety. This system introduced a method for rail crack detection. The proposed system is
LED-LDR and Arduino based rail track detection scheme. It is cost effective and simple way of monitoring the
condition of the rails on a continual basis for the improving the railway safety which consists of GSM module
and Encoder.
Advance Road Safety for Ghat Road’s at Hairpin Bend
This document discusses road safety issues and accidents that occur at hazardous ghat road sections in India. It first introduces the problem of increasing road accidents worldwide and in India, particularly at ghat road sections which have sharp hairpin bends. It then analyzes causes of accidents in ghat road sections like narrow roads, poor visibility around bends, and lack of safety measures. The document proposes using CCTV cameras and LCD screens instead of mirrors to provide drivers visibility around blind corners. This would help drivers see oncoming vehicles and avoid collisions at hazardous bends. Finally, the document concludes that implementing this technique could help reduce accidents and save lives on dangerous ghat road sections.
Iisrt jim isaac
This paper proposes a low-cost system to alert Indian fishermen when they cross maritime boundaries and prevent their boats from illegally entering neighboring countries' waters. The system uses GPS to determine the boat's location and sends alerts when it nears the boundary. It also includes an engine control unit connected to the boat's fuel injector. When the boat crosses into foreign waters, the system cuts off the fuel supply to stop the boat. This allows fishermen to be warned and monitored to prevent smuggling while avoiding high-cost alternatives.
Wireless Reporting System for Accident Detection at Higher Speeds
Speed is one of the basic reasons for vehicle accident. Many lives could have been saved if emergency service
could get accident information and reach in time. Nowadays, GPS has become an integral part of a vehicle
system. This paper proposes to utilize the capability of a GPS receiver to monitor speed of a vehicle and detect
accident basing on monitored speed and send accident location to an Alert Service Center. The GPS will
monitor speed of a vehicle and compare with the previous speed in every second through a Microcontroller
Unit. Whenever the speed will be below the specified speed, it will assume that an accident has occurred. The
system will then send the accident location acquired from the GPS along with the time and the speed by utilizing
the GSM network. This will help to reach the rescue service in time and save the valuable human life.
John Barker - UAVs: Where Are We And What's Next
UAVs: Where Are We And What's Next - John Barker, OSU Extension, from the 2020 Conservation Tillage and Technology Conference, held March 3-4, 2020, Ada, OH, USA.
ICIECA 2014 Paper 04
The document proposes a system to monitor Indian fishermen along the maritime border with Sri Lanka using GPS. A Nokia 6600 mobile phone equipped with GPS would track each fisherman's location and send alerts to the Indian Navy if they cross into Sri Lankan waters, allowing the Navy to warn the fishermen to return. Fishermen's details would be stored in a PostgreSQL database for identification. The system aims to safely guide fishermen and prevent international disputes due to border violations.
Automobile collision avoidance system
The document discusses automobile collision avoidance systems and their importance in increasing road safety. It provides statistics showing the large number of traffic fatalities worldwide each year. It then describes several key collision avoidance technologies such as forward collision warning systems, automatic emergency braking, and lane departure warning. These technologies use sensors and automatic braking to detect hazards and prevent accidents. The document also analyzes patent data, finding growing research interest in forward collision avoidance technology. Major automakers are working to incorporate collision avoidance systems, which could reduce accidents by 20-40% according to some estimates.
Anti collision devices
The document discusses anti-collision devices used in trains. It describes how anti-collision devices (ACD) use radio frequency and GPS to automatically brake trains 3 km ahead of a blockade to prevent collisions from human error or equipment failure. The ACD system was invented by Rajaram Bojji and installed on over 2,700 km of track in India, preventing 82% of accidents from 1997-2000. The ACD provides additional safety without replacing existing signaling and is a cost-effective solution without needing track cabling or inputs from train crews.
Autonomous ship
The document discusses the development of autonomous ships. It describes several autonomous shipping projects including the world's first autonomous shipping company established by Wilhelmsen and KONGSBERG, and Rolls-Royce's partnership with Google to create smarter autonomous ships using machine learning. It also discusses Yara Birkeland, the world's first fully electric and autonomous container ship, and a demonstration of the world's first fully autonomous ferry in Finland. The document outlines some of the key technologies needed for autonomous ships including advanced sensor modules, deep sea navigation systems, remote maneuvering support systems, and engine monitoring and control systems. It describes the role of shore control centers in monitoring and assisting autonomous ships.
ANTI COLLISION SYSTEM IN CARS
Automobiles have significantly changed human life and continue to develop rapidly through lower costs, increased quality and innovation, and global standardization. This document proposes an automatic vehicle anti-collision device using ultrasonic range finders and electromagnetic fields to repel vehicles, in order to take action without relying on drivers and reduce accidents. The proposed device includes sensors, a microcontroller, LCD display, buzzers, motor drivers, DC geared motors, and software and hardware to detect potential collisions and repel vehicles.
Automatic braking system
This document describes an automatic braking system for vehicles that uses ultrasonic sensors to detect obstacles and apply the brakes autonomously. The system consists of an ultrasonic sensor with transmitter and receiver, a microprocessor, DC gear motor, servomotor, and braking components. It works by transmitting ultrasonic waves from the sensor transmitter and detecting reflections from obstacles with the receiver. The microprocessor analyzes the sensor data and controls the servomotor, which applies the brakes through the braking system if an obstacle is detected within a certain distance from the vehicle. This automatic braking system is intended to prevent accidents by braking the vehicle automatically if the driver is unable to brake manually in time upon detecting an obstacle.
Autonomous ship
Autonomous shipping is the future of the maritime industry.
A ship’s ability to monitor its own health, establish and communicate what is around it and make decisions based on that information is vital to the development of autonomous operations
Wilhelmsen and KONGSBERG joined forces to take the next step in autonomous shipping by offering a complete value chain for autonomous ships, from design and development, to control systems, logistics services and vessel operations.
P0333086093
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Fully automatic anti collision train signalling project
This document is a project report submitted by four students for their Bachelor of Technology degree. It outlines their work on developing a fully automatic anti-collision system for train signalling. The system is designed to control railway tracks using sensors and a microcontroller to avoid accidents. It places sensors at distances from gates to detect approaching trains and control gate operations. Indicator lights also alert motorists of oncoming trains. Diagrams and descriptions of the working model are provided, which uses sensors to detect trains and automatically switch tracks or control gates to prevent collisions. Devices used in the system like the microcontroller, sensors, displays and other electronics are described.
automatic braking system and brake actuation before collison
In this project the pneumatic bumper and brake is used to protect the man and vehicle. This system is only activated when any obstacle comes in front of vehicle, the obstacle is sensed by sensor and it gives the signal to the control unit and due to this bumper system and braking system activated. Bumper is energized by compressor and it compressed the air and send it to the pneumatic piston. This system is used in any type of light vehicles.
kyrosplane brochure english
The Remotely piloted aircraft system KYROSPLANE is configured for surveillance and reconnaissance missions with autonomous flight capabilities. It can be operated by a crew of three people to capture video and photographs from its 18 megapixel camera payload. Applications include border surveillance, suspect tracking, traffic monitoring, damage assessment, and aerial photography. The KYROSPLANE has a 2.6m span, 1.7m length, 18kg maximum takeoff weight, and can carry a 4.6kg payload for up to 4 hours at a cruise speed of 140km/h with a 70km range.
Driver assistance system
This document presents a mid-thesis report on a driver assistance system using CAN network. It introduces the system being developed including ultrasonic sensors, CAN module, LCD display, and Bluetooth/GPS modules. It discusses existing collision warning systems and identifies problems with traffic safety. The proposed system is intended to detect obstacles and warn the driver in advance of possible collisions. The implementation plan involves using Keil IDE to simulate CAN communication between sensors and microcontroller. The project aims to improve response time and provide safety for drivers in congested traffic conditions.
IRJET- Automatic Movable Railway Bridge & Energy Generation from Piezoelectri...
This document proposes an automated movable railway bridge that can open and close based on train arrival and departure to help people safely cross between platforms. It would use sensors to detect trains and a microcontroller to control a motor that opens and closes the bridge. Additionally, piezoelectric tiles placed on the bridge could generate electricity from foot traffic and reduce energy usage. The system is intended to increase safety and efficiency at busy train stations while providing energy generation capabilities.
Collision avoidance system tony napier
The document describes a collision avoidance system from Becker Mining Systems that uses multiple detection technologies, including UHF RFID, electromagnetic RFID, and radar ranging, to detect potential collisions between people, vehicles, and other targets in a mining environment. It aims to provide reliable warnings while minimizing annoyance through its use of redundant detectors, accurate distance measurements, and carefully designed warning zones and interfaces. The system incorporates detectors like the DPOD400 and EPOD200 that use different technologies, as well as subsystems for directional warnings, zone control, and user interaction.
Mobileye Effectiveness Data
A study conducted by the Federal Motor Carrier Safety Administration found that rear-end collisions could be reduced through the use of Forward Collision Warning Systems. An analysis estimated that 18,013 rear-end crashes involving trucks and motor carriers from 2001-2005 could have been prevented through FCWS. Lane Departure Warning Systems could have prevented 8,120 crashes caused by lane departures. The avoided costs of FCWS and LDWS were estimated to be in the ranges of $100,000-$1,000,000 depending on whether crashes involved property damage only, injury, or fatality.
Automatic Braking System
Semester Project: Automatic Braking System for safety Hazards
@University of Engineering and Technology lahore KSK Campus
Traffic etiquettes
Traffic safety is important to highlight. Road accidents lead to many fatalities and injuries in Pakistan annually. The WHO has set global road safety targets for 2030 including reducing speeds, increasing seatbelt usage, and expanding crash helmet usage. Pakistan's road safety strategies focus on the safe system approach. Key road etiquettes include not speeding, drunk driving, tailgating, and ensuring all passengers wear seatbelts. Strengthening enforcement of traffic laws and increasing public awareness are recommended to improve road and traffic safety in Pakistan.
IRJET- Truck Weighing based on the Suspension of the Vehicle
This document proposes a system to dynamically estimate the weight of a truck's load based on the compression of the vehicle's suspension. It uses ultrasonic sensors mounted under the truck's carrier to measure the distance between the sensors as the suspension compresses under different load weights. The distances measured are used to calculate the load weight through experimentation with known standard loads. If the weight exceeds a threshold, the system prevents the truck from starting to curb overloading. It aims to overcome limitations of existing static weighing stations that require trucks to stop for weighing.
E call ppt
The document discusses e-call systems, which automatically connect to emergency services in the event of a vehicle accident. E-call systems use in-vehicle sensors to detect accidents and GPS to locate the vehicle. They then make an emergency 112 voice call and transmit a minimum set of data about the time, location, and vehicle. This allows emergency responders to arrive faster, which can save thousands of lives each year by reducing the time between an accident and medical assistance. The technology is complex but becoming mandatory in new European vehicles by 2015 due to its life-saving benefits.
Collision Avoidance System
CAS is a collision avoidance system designed to prevent rear-end collisions. It uses sensors like millimeter-wave radar and an electronic control unit to detect the distance and closing speed to vehicles ahead. When a collision is detected as imminent, it provides warnings through visual and audio alerts and applies braking to help avoid or mitigate the impact of a crash. CAS has become increasingly common in vehicles from manufacturers worldwide since the early 2000s and could expand to other transportation modes in the future.
Fleet Benefits
Learn about the benefits you can enjoy by installing Mobileye Collision Prevention Systems on your fleet.
A new method to prevent accidents in railways using microcontroller based on
This document describes a proposed system to prevent train accidents using a microcontroller-based device called a Vigilance Control Device (VCD). The VCD would monitor the driver's operation of the train and automatically apply the brakes if it detects that the driver is incapacitated, asleep, or otherwise unable to control the train. It uses technologies like GPS and GSM to track the train's location and send alerts. The proposed system includes components like a microcontroller, LCD display, buzzer, relay, DC motor, GSM modem and GPS module. It is intended to increase safety by ensuring trains can be stopped even if the driver becomes unable to operate the controls.
SMART DEAF AND BLIND PASSENGER VOICE ALERT SYSTEM IN PUBLIC AREA
This document describes a smart system to provide deaf and blind passengers with public transportation schedule alerts and notifications using seismic waves. The system includes a microcontroller, LCD display, Bluetooth module, vibration motor, seismic wave generator, and text-to-speech converter. It allows transportation schedule information to be transmitted to the passenger's receiver device via seismic waves generated by the seismic wave generator. This helps deaf and blind passengers understand transportation schedules like normal passengers and improves their experience using public transportation.
Wireless Power Transfer for Electric Cars
This document discusses a proposed wireless power transfer system for charging electric vehicles in parking facilities. The system uses inductive coupling between transmitting and receiving coils to wirelessly charge electric vehicle batteries. It also implements RFID technology for users to pay for charging and parking via an online account. The system is designed to be installed in existing parking structures to add wireless charging capabilities without needing to build new infrastructure. It has the potential to improve the electric vehicle charging experience and support increased EV adoption.
More Related Content
What's hot
Anti collision devices
The document discusses anti-collision devices used in trains. It describes how anti-collision devices (ACD) use radio frequency and GPS to automatically brake trains 3 km ahead of a blockade to prevent collisions from human error or equipment failure. The ACD system was invented by Rajaram Bojji and installed on over 2,700 km of track in India, preventing 82% of accidents from 1997-2000. The ACD provides additional safety without replacing existing signaling and is a cost-effective solution without needing track cabling or inputs from train crews.
Autonomous ship
The document discusses the development of autonomous ships. It describes several autonomous shipping projects including the world's first autonomous shipping company established by Wilhelmsen and KONGSBERG, and Rolls-Royce's partnership with Google to create smarter autonomous ships using machine learning. It also discusses Yara Birkeland, the world's first fully electric and autonomous container ship, and a demonstration of the world's first fully autonomous ferry in Finland. The document outlines some of the key technologies needed for autonomous ships including advanced sensor modules, deep sea navigation systems, remote maneuvering support systems, and engine monitoring and control systems. It describes the role of shore control centers in monitoring and assisting autonomous ships.
ANTI COLLISION SYSTEM IN CARS
Automobiles have significantly changed human life and continue to develop rapidly through lower costs, increased quality and innovation, and global standardization. This document proposes an automatic vehicle anti-collision device using ultrasonic range finders and electromagnetic fields to repel vehicles, in order to take action without relying on drivers and reduce accidents. The proposed device includes sensors, a microcontroller, LCD display, buzzers, motor drivers, DC geared motors, and software and hardware to detect potential collisions and repel vehicles.
Automatic braking system
This document describes an automatic braking system for vehicles that uses ultrasonic sensors to detect obstacles and apply the brakes autonomously. The system consists of an ultrasonic sensor with transmitter and receiver, a microprocessor, DC gear motor, servomotor, and braking components. It works by transmitting ultrasonic waves from the sensor transmitter and detecting reflections from obstacles with the receiver. The microprocessor analyzes the sensor data and controls the servomotor, which applies the brakes through the braking system if an obstacle is detected within a certain distance from the vehicle. This automatic braking system is intended to prevent accidents by braking the vehicle automatically if the driver is unable to brake manually in time upon detecting an obstacle.
Autonomous ship
Autonomous shipping is the future of the maritime industry.
A ship’s ability to monitor its own health, establish and communicate what is around it and make decisions based on that information is vital to the development of autonomous operations
Wilhelmsen and KONGSBERG joined forces to take the next step in autonomous shipping by offering a complete value chain for autonomous ships, from design and development, to control systems, logistics services and vessel operations.
P0333086093
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Fully automatic anti collision train signalling project
This document is a project report submitted by four students for their Bachelor of Technology degree. It outlines their work on developing a fully automatic anti-collision system for train signalling. The system is designed to control railway tracks using sensors and a microcontroller to avoid accidents. It places sensors at distances from gates to detect approaching trains and control gate operations. Indicator lights also alert motorists of oncoming trains. Diagrams and descriptions of the working model are provided, which uses sensors to detect trains and automatically switch tracks or control gates to prevent collisions. Devices used in the system like the microcontroller, sensors, displays and other electronics are described.
automatic braking system and brake actuation before collison
In this project the pneumatic bumper and brake is used to protect the man and vehicle. This system is only activated when any obstacle comes in front of vehicle, the obstacle is sensed by sensor and it gives the signal to the control unit and due to this bumper system and braking system activated. Bumper is energized by compressor and it compressed the air and send it to the pneumatic piston. This system is used in any type of light vehicles.
kyrosplane brochure english
The Remotely piloted aircraft system KYROSPLANE is configured for surveillance and reconnaissance missions with autonomous flight capabilities. It can be operated by a crew of three people to capture video and photographs from its 18 megapixel camera payload. Applications include border surveillance, suspect tracking, traffic monitoring, damage assessment, and aerial photography. The KYROSPLANE has a 2.6m span, 1.7m length, 18kg maximum takeoff weight, and can carry a 4.6kg payload for up to 4 hours at a cruise speed of 140km/h with a 70km range.
Driver assistance system
This document presents a mid-thesis report on a driver assistance system using CAN network. It introduces the system being developed including ultrasonic sensors, CAN module, LCD display, and Bluetooth/GPS modules. It discusses existing collision warning systems and identifies problems with traffic safety. The proposed system is intended to detect obstacles and warn the driver in advance of possible collisions. The implementation plan involves using Keil IDE to simulate CAN communication between sensors and microcontroller. The project aims to improve response time and provide safety for drivers in congested traffic conditions.
IRJET- Automatic Movable Railway Bridge & Energy Generation from Piezoelectri...
This document proposes an automated movable railway bridge that can open and close based on train arrival and departure to help people safely cross between platforms. It would use sensors to detect trains and a microcontroller to control a motor that opens and closes the bridge. Additionally, piezoelectric tiles placed on the bridge could generate electricity from foot traffic and reduce energy usage. The system is intended to increase safety and efficiency at busy train stations while providing energy generation capabilities.
Collision avoidance system tony napier
The document describes a collision avoidance system from Becker Mining Systems that uses multiple detection technologies, including UHF RFID, electromagnetic RFID, and radar ranging, to detect potential collisions between people, vehicles, and other targets in a mining environment. It aims to provide reliable warnings while minimizing annoyance through its use of redundant detectors, accurate distance measurements, and carefully designed warning zones and interfaces. The system incorporates detectors like the DPOD400 and EPOD200 that use different technologies, as well as subsystems for directional warnings, zone control, and user interaction.
Mobileye Effectiveness Data
A study conducted by the Federal Motor Carrier Safety Administration found that rear-end collisions could be reduced through the use of Forward Collision Warning Systems. An analysis estimated that 18,013 rear-end crashes involving trucks and motor carriers from 2001-2005 could have been prevented through FCWS. Lane Departure Warning Systems could have prevented 8,120 crashes caused by lane departures. The avoided costs of FCWS and LDWS were estimated to be in the ranges of $100,000-$1,000,000 depending on whether crashes involved property damage only, injury, or fatality.
Automatic Braking System
Semester Project: Automatic Braking System for safety Hazards
@University of Engineering and Technology lahore KSK Campus
Traffic etiquettes
Traffic safety is important to highlight. Road accidents lead to many fatalities and injuries in Pakistan annually. The WHO has set global road safety targets for 2030 including reducing speeds, increasing seatbelt usage, and expanding crash helmet usage. Pakistan's road safety strategies focus on the safe system approach. Key road etiquettes include not speeding, drunk driving, tailgating, and ensuring all passengers wear seatbelts. Strengthening enforcement of traffic laws and increasing public awareness are recommended to improve road and traffic safety in Pakistan.
IRJET- Truck Weighing based on the Suspension of the Vehicle
This document proposes a system to dynamically estimate the weight of a truck's load based on the compression of the vehicle's suspension. It uses ultrasonic sensors mounted under the truck's carrier to measure the distance between the sensors as the suspension compresses under different load weights. The distances measured are used to calculate the load weight through experimentation with known standard loads. If the weight exceeds a threshold, the system prevents the truck from starting to curb overloading. It aims to overcome limitations of existing static weighing stations that require trucks to stop for weighing.
E call ppt
The document discusses e-call systems, which automatically connect to emergency services in the event of a vehicle accident. E-call systems use in-vehicle sensors to detect accidents and GPS to locate the vehicle. They then make an emergency 112 voice call and transmit a minimum set of data about the time, location, and vehicle. This allows emergency responders to arrive faster, which can save thousands of lives each year by reducing the time between an accident and medical assistance. The technology is complex but becoming mandatory in new European vehicles by 2015 due to its life-saving benefits.
Collision Avoidance System
CAS is a collision avoidance system designed to prevent rear-end collisions. It uses sensors like millimeter-wave radar and an electronic control unit to detect the distance and closing speed to vehicles ahead. When a collision is detected as imminent, it provides warnings through visual and audio alerts and applies braking to help avoid or mitigate the impact of a crash. CAS has become increasingly common in vehicles from manufacturers worldwide since the early 2000s and could expand to other transportation modes in the future.
Fleet Benefits
Learn about the benefits you can enjoy by installing Mobileye Collision Prevention Systems on your fleet.
A new method to prevent accidents in railways using microcontroller based on
This document describes a proposed system to prevent train accidents using a microcontroller-based device called a Vigilance Control Device (VCD). The VCD would monitor the driver's operation of the train and automatically apply the brakes if it detects that the driver is incapacitated, asleep, or otherwise unable to control the train. It uses technologies like GPS and GSM to track the train's location and send alerts. The proposed system includes components like a microcontroller, LCD display, buzzer, relay, DC motor, GSM modem and GPS module. It is intended to increase safety by ensuring trains can be stopped even if the driver becomes unable to operate the controls.
What's hot (20)
Fully automatic anti collision train signalling project
Fully automatic anti collision train signalling project
automatic braking system and brake actuation before collison
automatic braking system and brake actuation before collison
IRJET- Automatic Movable Railway Bridge & Energy Generation from Piezoelectri...
IRJET- Automatic Movable Railway Bridge & Energy Generation from Piezoelectri...
IRJET- Truck Weighing based on the Suspension of the Vehicle
IRJET- Truck Weighing based on the Suspension of the Vehicle
A new method to prevent accidents in railways using microcontroller based on
A new method to prevent accidents in railways using microcontroller based on
Similar to Riverine passenger vessel overload detedtion and monitoring system
SMART DEAF AND BLIND PASSENGER VOICE ALERT SYSTEM IN PUBLIC AREA
This document describes a smart system to provide deaf and blind passengers with public transportation schedule alerts and notifications using seismic waves. The system includes a microcontroller, LCD display, Bluetooth module, vibration motor, seismic wave generator, and text-to-speech converter. It allows transportation schedule information to be transmitted to the passenger's receiver device via seismic waves generated by the seismic wave generator. This helps deaf and blind passengers understand transportation schedules like normal passengers and improves their experience using public transportation.
Wireless Power Transfer for Electric Cars
This document discusses a proposed wireless power transfer system for charging electric vehicles in parking facilities. The system uses inductive coupling between transmitting and receiving coils to wirelessly charge electric vehicle batteries. It also implements RFID technology for users to pay for charging and parking via an online account. The system is designed to be installed in existing parking structures to add wireless charging capabilities without needing to build new infrastructure. It has the potential to improve the electric vehicle charging experience and support increased EV adoption.
Wireless Power Transfer for Electric Cars
This document discusses a proposed wireless power transfer system for charging electric vehicles in parking facilities. The system uses inductive coupling between transmitting and receiving coils to wirelessly charge electric vehicle batteries. It also implements RFID technology for users to pay for charging and parking via an online account. The system is designed to be installed in existing parking structures to add wireless charging capabilities without needing to build new infrastructure. It has the potential to improve the electric vehicle charging experience and support increased EV adoption.
Design and Fabrication of Quadcopter for Health Crare Purposes (Final Present...
This document describes a project to design and fabricate a quadcopter for healthcare purposes. A group of students designed an X-shaped quadcopter that can lift 50-100 grams to deliver medical supplies. They conducted research on using drones for emergency response. The proposed methodology controls four motors with an Arduino flight controller. Simulation results demonstrated speed control of individual motors and the full drone. A physical prototype was built and tested that had a stable flight and could lift the required weight. The project addressed using quadcopters to reduce emergency response times.
IRJET- Railway Track Fault Detection System using Robot Car
This document summarizes a railway track fault detection system using a robot car. The system uses infrared sensors mounted on the car to detect cracks in the railway tracks. When a crack is detected, the car stops and a GPS receiver is used to determine the location. This location is then sent as a text message via GSM to notify authorities. The system also uses ultrasonic sensors to detect obstacles or animals on the tracks to prevent collisions. The robot car is powered by a microcontroller and motors to move forward along the tracks while monitoring for faults. The goal is to develop an affordable and intelligent train collision avoidance system to prevent accidents and increase railway safety.
IRJET- Underwater Drone
The document describes a proposed underwater drone capable of detecting and detonating naval mines. The drone would use sonar and cameras to detect mines and other objects underwater. It would be remotely controlled from a surface vessel via a long cable to allow it to cover large areas. The drone would be constructed from non-metallic PVC to avoid detection by mines that detect magnetic fields. It would have thrusters to maneuver and depth controls. Upon detecting a mine, it could either detonate itself next to the mine or detach the mine's cables to render it harmless. The drone aims to provide a safer alternative to existing minesweeping methods.
IRJET- A Survey Paper on Dam Management
This document discusses various approaches to dam management through the use of sensors and IoT technologies. It provides an overview of 16 research papers related to using sensors to monitor water levels, detect cracks and corrosion, control dam gates automatically, and provide early flood detection. The goal of the discussed research is to improve dam safety and water management by automating monitoring and control functions to minimize failures and optimize water distribution. IoT technologies allow data from sensors to be transmitted remotely for analysis and timely decision making by authorities. The surveyed approaches aim to enhance dam safety and efficiency through automated monitoring and control systems.
ACCIDENT DETECTION AND AVOIDANCE USING VEHICLE TO VEHICLE COMMUNICATION (V2V)
The document describes a proposed vehicle accident detection and avoidance system using vehicle-to-vehicle (V2V) communication. The system would use sensors like accelerometers, crash sensors, vibration sensors, alcohol sensors, GPS, and GSM modules to detect accidents and drunk driving in real-time. When an accident or drunk driving incident is detected, the system would send alerts with the vehicle's location to emergency responders. It would also use V2V communication to warn other nearby vehicles of the situation via the NRF24L01 wireless module. The system aims to reduce accidents and save lives by quickly notifying authorities and preventing further collisions. It additionally includes an automated parking feature to safely park a vehicle if drunk driving is detected
IRJET - Advanced Flood Level Monitoring and Alerting System
This document describes an advanced flood level monitoring and alerting system. The system uses an ultrasonic sensor to monitor water levels and send alerts via SMS, buzzer, and LCD display when levels reach safety thresholds. It also uploads water level data to a webpage using IoT for remote monitoring. The system is designed to alert people to flooding and allow evacuation before flood waters reach dangerous levels, helping minimize damage and save lives. It provides real-time flood monitoring and early warning capabilities to communities.
AN ARDUINO BASED EMBEDDED SYSTEM IN PASSENGER CAR FOR ROAD SAFETY
this is based upon wireless communication with transmitter receiver type system. transmitter is kept in the traffic signal box and receiver is installed in every vehicle. now by sending command to vehicle we can control speed, honking of vehicle around school and hospital areas and prevent fatal accidents.
Drone project report
Drone (Unmanned aerial vehicle) is an electronic device which is remote controlled based aircraft used to achieve vertical flight with stability using KK2.1.5 board and it can be used for live streaming and also for capturing images using camera and as technology advances increase the performance and reduces the cost of microcontroller so that general public can design their own drone . The main aim of this project is for live streaming and collecting images. This drone includes a frame, flight control board, motors, electronic speed controllers, a transmitter, a receiver, a Lipo battery and a camera interfaced with the kit. Individual components were tested and verified. The tuning and calibration of the PID controller were done to obtain stabilization on each axis. Currently, the drone can properly stabilize itself. The aim of the project has been achieved, resulting in stable and capturing images.
URBAN FLOOD SUSCEPTIBILITY MAP OF CHENNAI - GIS AND RANDOM FOREST METHOD
This document summarizes a study that created an urban flood susceptibility map of Chennai, India using GIS and the random forest machine learning method. Eleven factors like elevation, land use, rainfall, and distance from rivers were used as inputs to the random forest model. 300 historic flood locations and 300 non-flood locations were collected and used to train and test the model. The random forest model achieved 95.5% accuracy in predicting flood locations. The output was used to classify the study area into low and high flood susceptibility zones to assist with flood management and mitigation.
AVD combination of engineering model ofgh
This document discusses using smartphones to learn driver braking behavior in the presence of road anomalies. It notes that by 2020, 70% of the world's population will be smartphone users, making smartphones well-suited for collecting large amounts of driving data. The document proposes using deep neural networks and a sliding correlation coefficient method to correlate road anomalies with driver behavior data collected from smartphones and other sensors. Extensive field tests were conducted to collect vehicle motion data. The method was validated using probabilistic metrics and proved robust for self-learning driver behavior.
IRJET - Automatic Potholes Detection and Alert System with Speed Reduction Fe...
This document describes an automatic pothole detection and alert system that uses ultrasonic sensors to detect potholes, a GPS module to determine their locations, and a GSM module to send alerts about detected potholes to registered mobile phones. It also uses a motor driver to reduce vehicle speed when approaching a pothole, helping prevent accidents. The system is intended to improve road safety and reduce vehicle damage from potholes. It analyzes distance between the vehicle and road surface using ultrasonic sensors to identify differences indicating a pothole. Location data and pothole information is sent via text message to mobile phones running an app to receive alerts. The goal is to warn drivers in advance of dangerous road conditions from p
IRJET- Improving Network Life Time using High Populated Harmony Search Al...
This document discusses improving network lifetime in underwater acoustic sensor networks using a multi-population harmony search algorithm. It proposes using the algorithm to elect leader nodes which can efficiently route data from sensor nodes to a base station, avoiding collisions. The document describes the network architecture, implementation of AODV routing combined with a round robin scheduling method, and analyzing results showing reduced delay when using the multi-population search algorithm. Improving underwater sensor network lifetime, reliability and efficiency through optimized routing techniques is the overall goal.
Some Of My Projects are Here
This document summarizes Nahid Ferdous' experience with drone projects at Daffodil International University. It discusses three main projects: 1) A helicam project completed in 2013 with a senior, 2) An autonomous air vehicle project in 2014 where Nahid was the team leader, and 3) Presenting a mini drone at Digital World 2015. For each project, it provides details on the materials, electronics, accomplishments, and media coverage. It concludes by stating Nahid is now working on drone mapping projects and aerial videography.
UiT Autonomous Ship Program
This document discusses the UiT Autonomous Ship Program and its research on technologies to support autonomous maritime transportation systems. It proposes a ship intelligence framework (SIF) that uses deep neural networks (DNNs) trained on large datasets to mimic human ship navigator behavior. The goals are to overcome issues with ship controllability and replace human navigators. A decision support system would provide an adequate safety buffer to help DNNs handle unexpected situations. The framework is conceptualized based on factors behind successful self-driving cars, and aims to train DNNs using real-world ship navigation data to achieve accurate autonomous control.
Density Based Traffic System with Emergency override using Bluetooth
This document is a project report submitted by four students for their bachelor's degree. It outlines a density based traffic system with emergency override using RFID. The proposed system allocates different time slots to roads based on vehicle density to improve time management. It also provides priority traffic signal management for high density lanes and emergency vehicles. An additional feature allows pedestrians to safely cross the road based on their request. The project implements a prototype for an automatic and safer traffic signal management system based on emergency conditions.
IRJET- Landmines Detection using UAV
This document describes a project using unmanned aerial vehicles (UAVs) and the concept of swarm robotics to detect landmines. The key points are:
1. UAVs equipped with sensors like metal detectors and cameras will work together to detect landmines over large areas.
2. Once detected, the locations of landmines will be mapped using high-resolution 360-degree cameras.
3. The goal is to reduce costs and risks to human lives by automating landmine detection and mapping operations. This system could save lives by eliminating dangerous manual detection methods.
IRJET- Remote Operated Floating River Cleaning Machine
This document describes a remote operated floating river cleaning machine. The machine uses solar power to operate and clean garbage and debris from river surfaces without requiring human operators. It functions using a conveyor belt powered by a motor to lift garbage and deposit it in a tray. A propeller driven by another motor moves the machine through the water. Sensors and a control system allow the machine to be operated remotely using an Android application. The goals are to reduce water pollution, protect aquatic life, and provide a more efficient alternative to manual cleaning methods.
Similar to Riverine passenger vessel overload detedtion and monitoring system (20)
SMART DEAF AND BLIND PASSENGER VOICE ALERT SYSTEM IN PUBLIC AREA
SMART DEAF AND BLIND PASSENGER VOICE ALERT SYSTEM IN PUBLIC AREA
Design and Fabrication of Quadcopter for Health Crare Purposes (Final Present...
Design and Fabrication of Quadcopter for Health Crare Purposes (Final Present...
IRJET- Railway Track Fault Detection System using Robot Car
IRJET- Railway Track Fault Detection System using Robot Car
ACCIDENT DETECTION AND AVOIDANCE USING VEHICLE TO VEHICLE COMMUNICATION (V2V)
ACCIDENT DETECTION AND AVOIDANCE USING VEHICLE TO VEHICLE COMMUNICATION (V2V)
IRJET - Advanced Flood Level Monitoring and Alerting System
IRJET - Advanced Flood Level Monitoring and Alerting System
AN ARDUINO BASED EMBEDDED SYSTEM IN PASSENGER CAR FOR ROAD SAFETY
AN ARDUINO BASED EMBEDDED SYSTEM IN PASSENGER CAR FOR ROAD SAFETY
URBAN FLOOD SUSCEPTIBILITY MAP OF CHENNAI - GIS AND RANDOM FOREST METHOD
URBAN FLOOD SUSCEPTIBILITY MAP OF CHENNAI - GIS AND RANDOM FOREST METHOD
IRJET - Automatic Potholes Detection and Alert System with Speed Reduction Fe...
IRJET - Automatic Potholes Detection and Alert System with Speed Reduction Fe...
IRJET- Improving Network Life Time using High Populated Harmony Search Al...
IRJET- Improving Network Life Time using High Populated Harmony Search Al...
Density Based Traffic System with Emergency override using Bluetooth
Density Based Traffic System with Emergency override using Bluetooth
IRJET- Remote Operated Floating River Cleaning Machine
IRJET- Remote Operated Floating River Cleaning Machine
Recently uploaded
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Recently uploaded (20)
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Riverine passenger vessel overload detedtion and monitoring system
- 1. Riverine Passenger Vessel Overload Detection and Wireless Monitoring Scheme Presented by Akimun Jannat, Md. Mamunoor Islam Department of Electrical and Electronic Engineering Chittagong University of Engineering & Technology
- 2. Pinak- 6 (In 2014) Copyright ©Department of EEE, CUET 42+ death
- 3. Motivation Copyright ©Department of EEE, CUET Year Launch Name Place Number of Death 2002 Salahuddin-2 Meghna River 450 2003 Nazreen-1 Meghna River 530 2005 Prince of Patuakhali Golapchipa, Patuakhali, Bangladesh 200+ 2008 Nazimuddin Ghorautura River, Kishoregani 41 2009 Coco-4 At port 72 2012 Shariatpur 1 Meghna River 116 2014 MV Miraj-4 Meghna River 56 2014 Pinak-6 Padma River 42+ List of maritime disasters in the 21st century https://en.wikipedia.org/wiki/List_of_maritime_disasters_in_the_2 1st_century
- 4. Accident Types: Present Scenario 44% 39% 9% Overloading Collision Excessive Current Physical Failure Others Overloading : The Key Malefactor *Ref: Zobair Ibn Awal, M. Rafiqul Islam, Md Mazharul Hoque,” Collision of marine vehicles in Bangladesh: a study on accident characteristics”, Disaster Prevention and Management, Vol. 19 No. 5, 2010, pp. 582-595. Copyright ©Department of EEE, CUET
- 5. Deadweight Tonnage Scale Deadweight Tonnage (DWT) is a measure of how much mass a ship can carry safely. Copyright ©Department of EEE, CUET
- 6. System Layout Data Acquisition unit Server Monitoring Unit Passenger UnitGSM Network Copyright ©Department of EEE, CUET Automatic Engine Shut off Alarm System
- 7. • DWT Level Sensor • Data Acquisition App Monitoring Unit Data Acquisition Unit Copyright ©Department of EEE, CUET
- 8. Passenger Unit Target People Copyright ©Department of EEE, CUET Demographic region: Bangladesh People Class: who travel by Launch Anyone with a Smart phone can use this app. User Friendliness Only 3 steps to find status Basic knowledge of smart phone Basic knowledge of English or Bangla
- 9. Commercial Feasibility Study Launch Section Name Cost (In BDT) Overload Detection Setup 1000 A Smart Phone 4000 Total Cost (Per Launch) 5000 Taka (Approx) Passenger Section Copyright ©Department of EEE, CUET 4000 BDT Only
- 10. SWOT Analysis Strengths Ensuring the safety of riverine vessels. Overload conditions can be detected automatically. Launch conditions can be monitored remotely. Launch engine can be shut off remotely in overload condition. A alarm system will inform the passengers. Passengers can check the launch status using app too. Weakness The mobile network is not strong enough in everywhere. Continuous power supply is required for the overall system. Opportunities The mobile Network might be improved in riverine area. GPS data can be used to find the drowning point of launch. Solar energy can be used for the power supply of the system. Threats Without mobile network, the system is vulnerable. Continuous power has to ensured for proper feasibility of system. Copyright ©Department of EEE, CUET
- 11. Vision 2021
Editor's Notes
- <number>