1. DILEEP KUMAR.KAVITI
Mobile: +971 508184239, +971 507495369, +91 9502436004
Email: kaviti.dileepkumar@gmail.com
Career Objective:
To work in an esteemed organization where I can fully utilize my skills, as well as develop a
career as an SENIOR INSTRUMENTATION ENGINEER.
Experience Summary:
Having 10 years of Detail & Field Engineering, Project Execution and Commissioning experience
which includes Reviewing Instrumentation related Engineering Documents, As Built of
Documents, Supervision & Inspection of Instrument related Installations, Calibration, Loop
checking, FAT / SAT, Punch list clearance, Construction and Commissioning activities execution
for Well Head Hydraulic Systems,RTU,SCADA,DCS,ESD,handing over of sub-systems/systems,
modifications as per site requirements, coordination with sub-contractors, vendor representatives
and clients for Engineering, Construction & commissioning activities for Onshore & Offshore Oil &
Gas Projects.
Participating client kick off meetings, monthly progress review meetings, close out reports
preparation. Prepare specific project schedule for Instrumentation activities, monitor and issue
reports on the progress from contractors. Identify and advise Project Manager of potential
technical issues and planning issues, and prepare and initiate corrective actions. Review and
approve contractor's project execution procedures, method statements, Quality & Control
Procedures. Communicate and coordinate other vendors, clients and contractors sound working
relationships with them. Coordinate with Instrumentation and other multi discipline design
review.
Resolving all engineering issues related to design, and technical clarifications are being given to
construction team, issuing FCN’s (Field Change Note) and approvals by client.
Fully familiar with international standards and EIL, PDO, Shell DEPs, GASCO, ADMA-OPCO,
ZADCO procedures to ensure technical integrity is maintained through compliance.
Implementation and review of signal loop drawings, cable schedules, instrument hookups
drawings, C&E diagrams, F&G layouts, termination diagrams and instrument installation
drawings, control room layout, interconnection diagram with electrical equipment and
Construction and Commissioning Work packages in line with Client standards.
Instruments & Control Systems Handled:
Emerson DELTAV DCS, HIMA ESD & F&G, Yokogawa CENTUM VP DCS, Yokogawa PROSAFE RS
ESD & F&G, WILLMAX well head control panels and Bentley Nevada BS3500 system,
WEATHERFORD RTU system, PROSERV TIM & HSSS, TSS4U Solar System, TELEVENT SCADA
System and VMONITOR ESD Systems.
Various makes of Field Bus, HART, SMART and Pneumatic Instruments, Analyzers and F&G
Instruments.
2. Various makes of Compressors, Pumps, PIG launchers & receivers.
Educational Qualifications:
• Bachelor of Technology (B.Tech) in Electronics and Instrumentation Engineering
(2002-2006).
• Pursuing MBA in Distance Education mode from ICFAI University.
Skills:
Able to work independently and along with team on various Instrumentation related
activities, Engineering, Calibration, Installation, Loop checking, Modification,
Troubleshooting.
Able to use various calibration standards, Project Specifications and standards.
Able to assist Instrumentation Engineering/Field Engineering/Execution/Commissioning
teams.
Experience in Oil & Gas Refinery, Petrochemical Industries for Offshore & Onshore in India
as well as in Middle East.
Good interpersonal skills and ability to lead a team and work as team member.
Familiar with safety system / Permit to work system.
Familiar with QA/AC systems according to the activities.
May 2015 – Present: For CONTROL APPLICATIONS EMIRATES AS Senior Instrument
Engineer.
Project: UZ 750 SURFACE FACILITIES in Zakum Artificial Islands, Abudhabi, U.A.E.
Client: Zakum Development Company (ZADCO)
EPC: Petrofac Emirates LLC
Responsibilities:
Preparation and reviewing of Instrument related Method Statements and working
procedures.
Initiating Technical Queries to Client for clarification.
Preparation of MAR (Material Approval requests) and submission to client for
Approval.
Providing engineering support for site construction Team.
Providing Instrument department support for all operations.
Conducting Site survey for planning and executing of Instrument Construction and
Commissioning Activities as an Instrument Engineer.
Planning and executing instrument Construction & Commissioning works for
South,North & West Islands under UZ750 project.
3. Responsible for Instrument Calibration & testing activities.
Interviewing & Assessing Junior Engineers, Supervisors & Instrument Technicians.
Preparing daily progress reports and submitting to clients.
Inspections of Instrumentation related material received from different vendors.
Playing major role in completion and handing over of projects to Client.
Attending Weekly, Bi-Weekly, Monthly progress review meetings with Client.
Attending Kick-off meetings with Vendors/Client for Execution of work in site.
January 2013 – May 2015: For CONTROL APPLICATIONS EMIRATES (EPC) AS Senior
Instrument Engineer.
Project: PROVISION OF RTU ON HIGH PRIORITY NON-TELEMETRY TOWERS in Zakum &
Ummshaif Offshore Field, Abudhabi, U.A.E.
Client: Abudhabi Marine Operating Company.ADMA-OPCO.
Responsibilities:
Preparation and reviewing of Instrument Index, signal loop drawings, cable
schedules, instrument hookups drawings, C&E diagrams, F&G layouts,
termination diagrams and instrument installation drawings, control room layout,
interconnection diagram with electrical equipment and Construction and
Commissioning Work packages in line with Client standards.
Planning and Executing instrument works for ZAKUM WEST & USSC areas.
Providing Instrument engineering support for all operations.
Conducting Site survey at Offshore Wellhead Towers for planning and executing of
Instrument Construction and Commissioning Activities as an EPC Instrument
Engineer.
Planning and executing instrument Construction & Commissioning works.
Preparing daily progress reports and submitting to clients.
Inspections of Instrumentation related material received from different vendors.
Playing major role in completion and handing over of projects to Client.
Preparing work packs, method statements & procedures for the Wellhead towers
activities and Control room activities related to Construction, Pre-comm. &
Commissioning activities for ADMA OPCO offshore project.
Participating in FAT activities at WEATHERFORD, PROSERV, TELEVENT and TSS4U
workshops for RTU, TIM & HSSS, SCADA and SOLAR systems respectively.
Attending Weekly, Bi-Weekly, Monthly progress review meetings with Client.
Attending Kick-off meetings with Vendors for Execution of work in site.
Preparing as built drawings as per site conditions.
4. December 2011 – January 2013: For PETROFAC (EPC) Emirates LLC as an
Instrumentation Engineer.
Project: NGL Train 4 Projects at Ruwais, Abudhabi, and U.A.E.
Client: Abudhabi Gas Industries Ltd., GASCO.
Responsibilities:
Undertake day to day Instrument operational support and providing detailed input to
instrument related activities.
Provide Instrument engineering support for all operations.
Ensure that all activities are carried in a safe and efficient manner to comply
with statutory and company standards.
Planning and executing instrument Commissioning works.
Preparing daily progress reports and submitting to clients.
Inspections and participating in Punch walk downs for getting system clearance.
Trouble shooting of Instruments in Shut down activities of existing NGL 1, 2, 3rd
train
Projects at GASCO, Ruwais.
Preparing and getting approval of Method Statement & Procedures for Commissioning
activities.
Participating in FAT activities at YOKOGAWA-YAD for F&G, DCS, ESD marshalling
cabinets, system cabinets, mimic panels, Logics & Graphics.
Executing Pre-comm. and Commissioning activities for HVAC systems, DCS, ESD,
F&G and MMS systems.
September 2010 – October 2011: For Process Control Technology (I) Pvt.Ltd, Mumbai,
India, as an Instrumentation Engineer.
Project: Essar Oil Refinery Project (Expansion Phase-I), Jamnagar, Gujarat, India
Client: Essar Projects (INDIA) Ltd. (EPIL).
Responsibilities:
Providing Instrument engineering support for all operations.
Manage subcontract activity within the instrument & control limit
Planning and Executing instrument works for D.C.U (Delayed Coker unit) area.
Supervising the activities Instrument cable installation, Instruments installation,
Junction boxes installation.
Supervision of Control panels erection, Cable Glanding and terminations.
Preparing daily progress reports and submitting to clients.
Preparing work-measurement bills.
Preparing as built drawings as per site condition.
5. March 2008 – September 2010: Process Control Technology (I) Pvt.Ltd, Mumbai, as an
Instrumentation Engineer For Galfar Construction & Contract Co, S.A.O.G, OMAN
Project: Harweel Cluster PH-2A/B Facilities Development Project in South OMAN.
EPC : Petrofac E&C International LTD.
Responsibilities:
Planning and Executing instrument works for MOBS, HCS, HMPS and WELL HEAD
areas.
Executed SAT checks as per the client Specifications of the DCS, ESD and F&G
systems at wellheads, HCS (HARWEEL COMPRESSION STATION), HMPS
(HARWEEL MAIN PRODUCTION STATION) & MOBS (MARMUL OIL BOOSTER
STATION).
Exposure in executing construction & commissioning activities for WILLMAX Hydraulic
Systems for SAKHIYA, ZALZALA, DAFAQ and RABAB Wellheads in HARWEEL.
Checking CAUSE & EFFECT and Control Narrative checks of all the systems.
Construction & Commissioning of Instrumentation activities for MARMUL OIL BOOSTER
STATION in Marmul.
Supervising the activities Instrument cable laying, Instruments installation, Junction
boxes installation and Loop Checking Activities.
Preparing as built drawings as per site conditions.
July 2006 – March 2008: Process Control Technology (I) Pvt.Ltd, Mumbai, as a
Graduate Trainee Instrumentation Engineer.
Project: Essar Oil Refinery Project, Jamnagar, Gujarat, India
Client: Essar Constructions (INDIA) Ltd. (ECIL).
NES: Engineers India Ltd. (EIL).
Responsibilities:
Supervising the instrumentation activities for the vis-breaker unit (VBU),
Ammonium recovery unit, and Sulphur recovery unit and Diesel Hydro
Desulphurization units.
Monitoring instrument activities at reactor, heater, air compressors and different
equipments, vessels and tanks.
Preparing work-measurement bills.
Working with various vendors like Emerson, Heurty Petrochem, MAN Tourbo,
Nuvo Pignone and Bentley Nevada etc
Working with various NES like Engineers India Limited, Tata consultancy ltd
Personal Snippets:
Date of birth : 27th April 1984.
6. Marital Status : Married.
Languages known : English, Hindi, Telugu, Arabic.
Nationality : Indian.
Passport No & Validity : M9977515 & 01-11-2025.
Computer proficiency : MS Office, Win PCS, Telvent Oasys SCADA, Petro
PCS,
TPMS, AutoCAD, C.
DILEEP KUMAR.KAVITI
7. Marital Status : Married.
Languages known : English, Hindi, Telugu, Arabic.
Nationality : Indian.
Passport No & Validity : M9977515 & 01-11-2025.
Computer proficiency : MS Office, Win PCS, Telvent Oasys SCADA, Petro
PCS,
TPMS, AutoCAD, C.
DILEEP KUMAR.KAVITI