REAL-WORLD AND RAPID FACE RECOGNITION TOWARD POSE AND EXPRESSION VARIATIONS VIA FEATURE LIBRARY MATRIX
•Download as DOCX, PDF•
0 likes•105 views
I3E Technologies, #23/A, 2nd Floor SKS Complex, Opp. Bus Stand, Karur-639 001. IEEE PROJECTS AVAILABLE, NON-IEEE PROJECTS AVAILABLE, APPLICATION BASED PROJECTS AVAILABLE, MINI-PROJECTS AVAILABLE. Mobile : 99436 99916, 99436 99926, 99436 99936 Mail ID: i3eprojectskarur@gmail.com Web: www.i3etechnologies.com, www.i3eprojects.com
Report
Share
Report
Share
Recommended
Face detection using the 3 x3 block rank patterns of gradient magnitude images
Face detection locates faces prior to various face-
related applications. The objective of face detecti
on is to
determine whether or not there are any faces in an
image and, if any, the location of each face is det
ected.
Face detection in real images is challenging due to
large variability of illumination and face appeara
nces.
This paper proposes a face detection algorithm usin
g the 3×3 block rank patterns of gradient magnitude
images and a geometrical face model. First, the ill
umination-corrected image of the face region is obt
ained
using the brightness plane that is produced using t
he locally minimum brightness of each block. Next,
the
illumination-corrected image is histogram equalized
, the face region is divided into nine (3×3) blocks
, and
two directional (horizontal and vertical) gradient
magnitude images are computed, from which the 3×3
block rank patterns are obtained. For face detectio
n, using the FERET and GT databases three types of
the
3×3 block rank patterns are a priori determined as
templates based on the distribution of the sum of t
he
gradient magnitudes of each block in the face candi
date region that is also composed of nine (3×3) blo
cks.
The 3×3 block rank patterns roughly classify whethe
r the detected face candidate region contains a fac
e or
not. Finally, facial features are detected and used
to validate the face model. The face candidate is
validated as a face if it is matched with the geome
trical face model. The proposed algorithm is tested
on the
Caltech database images and real images. Experiment
al results with a number of test images show the
effectiveness of the proposed algorithm.
ZERNIKE MOMENT-BASED FEATURE EXTRACTION FOR FACIAL RECOGNITION OF IDENTICAL T...
Face recognition is one of the most challenging problems in the domain of image processing and machine
vision. The face recognition system is critical when individuals have very similar biometric signature such
as identical twins. In this paper, new efficient facial-based identical twins recognition is proposed
according to geometric moment. The utilized geometric moment is Zernike Moment (ZM) as a feature
extractor inside the facial area of identical twins images. Also, the facial area in an image is detected using
AdaBoost approach. The proposed method is evaluated on two datasets, Twins Days Festival and Iranian
Twin Society which contain scaled and rotated facial images of identical twins in different illuminations.
The results prove the ability of proposed method to recognize a pair of identical twins. Also, results show
that the proposed method is robust to rotation, scaling and changing illumination.
& Topics International Journal of Computer Science, Engineering and Informati...
Face recognition is one of the most challenging problems in the domain of image processing and machine
vision. The face recognition system is critical when individuals have very similar biometric signature such
as identical twins. In this paper, new efficient facial-based identical twins recognition is proposed
according to geometric moment. The utilized geometric moment is Zernike Moment (ZM) as a feature
extractor inside the facial area of identical twins images. Also, the facial area in an image is detected using
AdaBoost approach. The proposed method is evaluated on two datasets, Twins Days Festival and Iranian
Twin Society which contain scaled and rotated facial images of identical twins in different illuminations.
The results prove the ability of proposed method to recognize a pair of identical twins. Also, results show
that the proposed method is robust to rotation, scaling and changing illumination.
Recommended
Face detection using the 3 x3 block rank patterns of gradient magnitude images
Face detection locates faces prior to various face-
related applications. The objective of face detecti
on is to
determine whether or not there are any faces in an
image and, if any, the location of each face is det
ected.
Face detection in real images is challenging due to
large variability of illumination and face appeara
nces.
This paper proposes a face detection algorithm usin
g the 3×3 block rank patterns of gradient magnitude
images and a geometrical face model. First, the ill
umination-corrected image of the face region is obt
ained
using the brightness plane that is produced using t
he locally minimum brightness of each block. Next,
the
illumination-corrected image is histogram equalized
, the face region is divided into nine (3×3) blocks
, and
two directional (horizontal and vertical) gradient
magnitude images are computed, from which the 3×3
block rank patterns are obtained. For face detectio
n, using the FERET and GT databases three types of
the
3×3 block rank patterns are a priori determined as
templates based on the distribution of the sum of t
he
gradient magnitudes of each block in the face candi
date region that is also composed of nine (3×3) blo
cks.
The 3×3 block rank patterns roughly classify whethe
r the detected face candidate region contains a fac
e or
not. Finally, facial features are detected and used
to validate the face model. The face candidate is
validated as a face if it is matched with the geome
trical face model. The proposed algorithm is tested
on the
Caltech database images and real images. Experiment
al results with a number of test images show the
effectiveness of the proposed algorithm.
ZERNIKE MOMENT-BASED FEATURE EXTRACTION FOR FACIAL RECOGNITION OF IDENTICAL T...
Face recognition is one of the most challenging problems in the domain of image processing and machine
vision. The face recognition system is critical when individuals have very similar biometric signature such
as identical twins. In this paper, new efficient facial-based identical twins recognition is proposed
according to geometric moment. The utilized geometric moment is Zernike Moment (ZM) as a feature
extractor inside the facial area of identical twins images. Also, the facial area in an image is detected using
AdaBoost approach. The proposed method is evaluated on two datasets, Twins Days Festival and Iranian
Twin Society which contain scaled and rotated facial images of identical twins in different illuminations.
The results prove the ability of proposed method to recognize a pair of identical twins. Also, results show
that the proposed method is robust to rotation, scaling and changing illumination.
& Topics International Journal of Computer Science, Engineering and Informati...
Face recognition is one of the most challenging problems in the domain of image processing and machine
vision. The face recognition system is critical when individuals have very similar biometric signature such
as identical twins. In this paper, new efficient facial-based identical twins recognition is proposed
according to geometric moment. The utilized geometric moment is Zernike Moment (ZM) as a feature
extractor inside the facial area of identical twins images. Also, the facial area in an image is detected using
AdaBoost approach. The proposed method is evaluated on two datasets, Twins Days Festival and Iranian
Twin Society which contain scaled and rotated facial images of identical twins in different illuminations.
The results prove the ability of proposed method to recognize a pair of identical twins. Also, results show
that the proposed method is robust to rotation, scaling and changing illumination.
ZERNIKE MOMENT-BASED FEATURE EXTRACTION FOR FACIAL RECOGNITION OF IDENTICAL T...
Face recognition is one of the most challenging problems in the domain of image processing and machine
vision. The face recognition system is critical when individuals have very similar biometric signature such
as identical twins. In this paper, new efficient facial-based identical twins recognition is proposed
according to geometric moment. The utilized geometric moment is Zernike Moment (ZM) as a feature
extractor inside the facial area of identical twins images. Also, the facial area in an image is detected using
AdaBoost approach. The proposed method is evaluated on two datasets, Twins Days Festival and Iranian
Twin Society which contain scaled and rotated facial images of identical twins in different illuminations.
The results prove the ability of proposed method to recognize a pair of identical twins. Also, results show
that the proposed method is robust to rotation, scaling and changing illumination.
AN EFFICIENT FEATURE EXTRACTION METHOD WITH LOCAL REGION ZERNIKE MOMENT FOR F...
Face recognition is one of the most challenging problems in the domain of image processing and machine vision. The face recognition system is critical when individuals have very similar biometric signature such as identical twins. In this paper, the facial area in an image is detected using AdaBoost approach. After that the facial area is divided into some local regions. Finally, new efficient facial-based identical twins feature extractor based on the geometric moment is applied into local regions of face image.The utilized geometric moment is Zernike Moment (ZM) as a feature extractor inside the local regions of facial area of identical twins images. The proposed method is evaluated on two datasets, Twins Days Festival and Iranian Twin Society which contain scaled and rotated facial images of identical twins in different illuminations. The results prove the ability of proposed method to recognize a pair of identical twins.Also, results show that the proposed method is robust to rotation, scaling and changing illumination.
An Efficient Feature Extraction Method With Local Region Zernike Moment for F...
Face recognition is one of the most challenging problems in the domain of image processing and machine vision. The face recognition system is critical when individuals have very similar biometric signature such as identical twins. In this paper, the facial area in an image is detected using AdaBoost approach. After that the facial area is divided into some local regions. Finally, new efficient facial-based identical twins feature extractor based on the geometric moment is applied into local regions of face image.The utilized geometric moment is Zernike Moment (ZM) as a feature extractor inside the local regions of facial area of identical twins images. The proposed method is evaluated on two datasets, Twins Days Festival and Iranian Twin Society which contain scaled and rotated facial images of identical twins in different illuminations. The results prove the ability of proposed method to recognize a pair of identical twins.Also, results show that the proposed method is robust to rotation, scaling and changing illumination.
An efficient feature extraction method with pseudo zernike moment for facial ...
Face recognition is one of the most challenging problems in the domain of image processing and machine
vision. Face recognition system is critical when individuals have very similar biometric signature such as
identical twins. In this paper, new efficient facial-based identical twins recognition is proposed according
to the geometric moment. The utilized geometric moment is Pseudo-Zernike Moment (PZM) as a feature
extractor inside the facial area of identical twins images. Also, the facial area inside an image is detected
using Ada Boost approach. The proposed method is evaluated on two datasets, Twins Days Festival and
Iranian Twin Society which contain scaled, which contain the shifted and rotated facial images of identical
twins in different illuminations. The results prove the ability of proposed method to recognize a pair of
identical twins. Also, results show that the proposed method is robust to rotation, scaling and changing
illumination.
A Novel Mathematical Based Method for Generating Virtual Samples from a Front...
This paper deals with one sample face recognition which is a new challenging problem in pattern recognition. In the proposed method, the frontal 2D face image of each person divided to some sub-regions. After computing the 3D shape of each sub-region, a fusion scheme is applied on sub-regions to create a total 3D shape for whole face image. Then, 2D face image is added to the corresponding 3D shape to construct 3D face image. Finally by rotating the 3D face image, virtual samples with different views are generated. Experimental results on ORL dataset using nearest neighbor as classifier reveal an improvement about 5% in recognition rate for one sample per person by enlarging training set using generated virtual samples. Compared with other related works, the proposed method has the following advantages: 1) only one single frontal face is required for face recognition and the outputs are virtual images with variant views for each individual 2) need only 3 key points of face (eyes and nose) 3) 3D shape estimation for generating virtual samples is fully automatic and faster than other 3D reconstruction approaches 4) it is fully mathematical with no training phase and the estimated 3D model is unique for each individual.
A novel approach for performance parameter estimation of face recognition bas...
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
Human’s facial parts extraction to recognize facial expression
Real-time facial expression analysis is an important yet challenging task in human computer interaction.
This paper proposes a real-time person independent facial expression recognition system using a
geometrical feature-based approach. The face geometry is extracted using the modified active shape
model. Each part of the face geometry is effectively represented by the Census Transformation (CT) based
feature histogram. The facial expression is classified by the SVM classifier with exponential chi-square
weighted merging kernel. The proposed method was evaluated on the JAFFE database and in real-world
environment. The experimental results show that the approach yields a high recognition rate and is
applicable in real-time facial expression analysis.
An algorithm to detect drivers
Driver's drowsiness is one of the major causes of serious accidents in road traffic. Thus, special effort in searching for better assistant technology has been paid. However, several existing approaches fail to work effectively as the head of a drowsy driver is usually in slanting state. Moreover, the shaking of vehicle or the driver's winking even makes the problem much more complicated. Anyway, head bend posture also signifies a drowsy state. Consequently, this paper proposes a novel approach by considering head nodding behavior as an input in our detection model. After detecting a human face, some significant facial features are extracted; then, they are used to calculate the predetermined optimal parameters; finally, drowsiness is
evaluated based on these thresholds. In our empirical experiments, the proposed algorithm can successfully
and accurately detect 96.56% of cases.
5116ijscmc01
Driver’s drowsiness is one of the major causes of serious accidents in road traffic. Thus, special effort in searching for better assistant technology has been paid. However, several existing approaches fail to work effectively as the head of a drowsy driver is usually in slanting state. Moreover, the shaking of vehicle or the driver’s winking even makes the problem much more complicated. Anyway, head bend posture also signifies a drowsy state. Consequently, this paper proposes a novel approach by considering head nodding behaviour as an input in our detection model. After detecting a human face, some significant facial features are extracted; then, they are used to calculate the predetermined optimal parameters; finally, drowsiness is evaluated based on these thresholds. In our empirical experiments, the proposed algorithm can successfully and accurately detect 96.56% of cases.
AN ALGORITHM TO DETECT DRIVER’S DROWSINESS BASED ON NODDING BEHAVIOUR
Driver’s drowsiness is one of the major causes of serious accidents in road traffic. Thus, special effort in
searching for better assistant technology has been paid. However, several existing approaches fail to work
effectively as the head of a drowsy driver is usually in slanting state. Moreover, the shaking of vehicle or
the driver’s winking even makes the problem much more complicated. Anyway, head bend posture also
signifies a drowsy state. Consequently, this paper proposes a novel approach by considering head nodding
behaviour as an input in our detection model. After detecting a human face, some significant facial features
are extracted; then, they are used to calculate the predetermined optimal parameters; finally, drowsiness is
evaluated based on these thresholds. In our empirical experiments, the proposed algorithm can successfully
and accurately detect 96.56% of cases.
Asymmetrical Half-Join Method on Dual Vision Face Recognition
This research proposes a model of face recognition using the method of joining two face images from left and right lens from a stereo vision camera namely half-join method. Half-join method is used in face image normalization processing. The proposed half-join method is a face images joining model, which is called asymmetrical half-join. In asymmetrical halfjoin method, a RoI (region of interest) of face image from left and right lenses are provided based on axis center of each eye in eye detection. The cropping of face image from asymmetrical half-join model has different width depends on eyes coordinate location. The proposed system shows that the asymmetrical half-join method can produce a better of face recognition rate. The experimental results show that the asymmetrical half-join method has a better recognition rate and computation time than single vision method and symmetrical half-join method.
FACIAL LANDMARKING LOCALIZATION FOR EMOTION RECOGNITION USING BAYESIAN SHAPE ...
This work presents a framework for emotion recognition, based in facial expression analysis using Bayesian Shape Models (BSM) for facial landmarking localization. The Facial Action Coding System (FACS) compliant facial feature tracking based on Bayesian Shape Model. The BSM estimate the parameters of the model with an implementation of the EM algorithm. We describe the characterization methodology from parametric model and evaluated the accuracy for feature detection and estimation of the parameters associated with facial expressions, analyzing its robustness in pose and local variations. Then, a methodology for emotion characterization is introduced to perform the recognition. The experimental results show that the proposed model can effectively detect the different facial expressions. Outperforming conventional approaches for emotion recognition obtaining high performance results in the estimation of emotion present in a determined subject. The model used and characterizationmethodology showed efficient to detect the emotion type in 95.6% of the cases.
Facial landmarking localization for emotion recognition using bayesian shape ...
This work presents a framework for emotion recognition, based in facial expression analysis
using Bayesian Shape Models (BSM) for facial landmarking localization. The Facial Action
Coding System (FACS) compliant facial feature tracking based on Bayesian Shape Model. The
BSM estimate the parameters of the model with an implementation of the EM algorithm. We
describe the characterization methodology from parametric model and evaluated the accuracy
for feature detection and estimation of the parameters associated with facial expressions,
analyzing its robustness in pose and local variations. Then, a methodology for emotion
characterization is introduced to perform the recognition. The experimental results show that
the proposed model can effectively detect the different facial expressions. Outperforming
conventional approaches for emotion recognition obtaining high performance results in the
estimation of emotion present in a determined subject. The model used and characterization
methodology showed efficient to detect the emotion type in 95.6% of the cases.
Unimodal Multi-Feature Fusion and one-dimensional Hidden Markov Models for Lo...
The objective of low-resolution face recognition is to identify faces from small size or poor quality images with varying pose, illumination, expression, etc. In this work, we propose a robust low face recognition technique based on one-dimensional Hidden Markov Models. Features of each facial image are extracted using three steps: firstly, both Gabor filters and Histogram of Oriented Gradients (HOG) descriptor are calculated. Secondly, the size of these features is reduced using the Linear Discriminant Analysis (LDA) method in order to remove redundant information. Finally, the reduced features are combined using Canonical Correlation Analysis (CCA) method. Unlike existing techniques using HMMs, in which authors consider each state to represent one facial region (eyes, nose, mouth, etc), the proposed system employs 1D-HMMs without any prior knowledge about the localization of interest regions in the facial image. Performance of the proposed method will be measured using the AR database.
Ck36515520
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Face Recognition
These papers describes Face Recognition Process using PCA Algorithm and Euclidean distance.
Face Alignment Using Active Shape Model And Support Vector Machine
The Active Shape Model (ASM) is one of the most popular local texture models for face alignment. It applies in many fields such as locating facial features in the image, face synthesis, etc. However, the experimental results show that the accuracy of the classical ASM for some applications is not high. This paper suggests some improvements on the classical ASM to increase the performance of the model in the application: face alignment. Four of our major improvements include: i) building a model combining Sobel filter and the 2-D profile in searching face in image; ii) applying Canny algorithm for the enhancement edge on image; iii) Support Vector Machine (SVM) is used to classify landmarks on face, in order to determine exactly location of these landmarks support for ASM; iv) automatically adjust 2-D profile in the multi-level model based on the size of the input image. The experimental results on CalTech face database and Technical University of Denmark database (imm_face) show that our proposed improvement leads to far better performance.
Add
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Design of a low voltage low-dropout regulator
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
More Related Content
Similar to REAL-WORLD AND RAPID FACE RECOGNITION TOWARD POSE AND EXPRESSION VARIATIONS VIA FEATURE LIBRARY MATRIX
ZERNIKE MOMENT-BASED FEATURE EXTRACTION FOR FACIAL RECOGNITION OF IDENTICAL T...
Face recognition is one of the most challenging problems in the domain of image processing and machine
vision. The face recognition system is critical when individuals have very similar biometric signature such
as identical twins. In this paper, new efficient facial-based identical twins recognition is proposed
according to geometric moment. The utilized geometric moment is Zernike Moment (ZM) as a feature
extractor inside the facial area of identical twins images. Also, the facial area in an image is detected using
AdaBoost approach. The proposed method is evaluated on two datasets, Twins Days Festival and Iranian
Twin Society which contain scaled and rotated facial images of identical twins in different illuminations.
The results prove the ability of proposed method to recognize a pair of identical twins. Also, results show
that the proposed method is robust to rotation, scaling and changing illumination.
AN EFFICIENT FEATURE EXTRACTION METHOD WITH LOCAL REGION ZERNIKE MOMENT FOR F...
Face recognition is one of the most challenging problems in the domain of image processing and machine vision. The face recognition system is critical when individuals have very similar biometric signature such as identical twins. In this paper, the facial area in an image is detected using AdaBoost approach. After that the facial area is divided into some local regions. Finally, new efficient facial-based identical twins feature extractor based on the geometric moment is applied into local regions of face image.The utilized geometric moment is Zernike Moment (ZM) as a feature extractor inside the local regions of facial area of identical twins images. The proposed method is evaluated on two datasets, Twins Days Festival and Iranian Twin Society which contain scaled and rotated facial images of identical twins in different illuminations. The results prove the ability of proposed method to recognize a pair of identical twins.Also, results show that the proposed method is robust to rotation, scaling and changing illumination.
An Efficient Feature Extraction Method With Local Region Zernike Moment for F...
Face recognition is one of the most challenging problems in the domain of image processing and machine vision. The face recognition system is critical when individuals have very similar biometric signature such as identical twins. In this paper, the facial area in an image is detected using AdaBoost approach. After that the facial area is divided into some local regions. Finally, new efficient facial-based identical twins feature extractor based on the geometric moment is applied into local regions of face image.The utilized geometric moment is Zernike Moment (ZM) as a feature extractor inside the local regions of facial area of identical twins images. The proposed method is evaluated on two datasets, Twins Days Festival and Iranian Twin Society which contain scaled and rotated facial images of identical twins in different illuminations. The results prove the ability of proposed method to recognize a pair of identical twins.Also, results show that the proposed method is robust to rotation, scaling and changing illumination.
An efficient feature extraction method with pseudo zernike moment for facial ...
Face recognition is one of the most challenging problems in the domain of image processing and machine
vision. Face recognition system is critical when individuals have very similar biometric signature such as
identical twins. In this paper, new efficient facial-based identical twins recognition is proposed according
to the geometric moment. The utilized geometric moment is Pseudo-Zernike Moment (PZM) as a feature
extractor inside the facial area of identical twins images. Also, the facial area inside an image is detected
using Ada Boost approach. The proposed method is evaluated on two datasets, Twins Days Festival and
Iranian Twin Society which contain scaled, which contain the shifted and rotated facial images of identical
twins in different illuminations. The results prove the ability of proposed method to recognize a pair of
identical twins. Also, results show that the proposed method is robust to rotation, scaling and changing
illumination.
A Novel Mathematical Based Method for Generating Virtual Samples from a Front...
This paper deals with one sample face recognition which is a new challenging problem in pattern recognition. In the proposed method, the frontal 2D face image of each person divided to some sub-regions. After computing the 3D shape of each sub-region, a fusion scheme is applied on sub-regions to create a total 3D shape for whole face image. Then, 2D face image is added to the corresponding 3D shape to construct 3D face image. Finally by rotating the 3D face image, virtual samples with different views are generated. Experimental results on ORL dataset using nearest neighbor as classifier reveal an improvement about 5% in recognition rate for one sample per person by enlarging training set using generated virtual samples. Compared with other related works, the proposed method has the following advantages: 1) only one single frontal face is required for face recognition and the outputs are virtual images with variant views for each individual 2) need only 3 key points of face (eyes and nose) 3) 3D shape estimation for generating virtual samples is fully automatic and faster than other 3D reconstruction approaches 4) it is fully mathematical with no training phase and the estimated 3D model is unique for each individual.
A novel approach for performance parameter estimation of face recognition bas...
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
Human’s facial parts extraction to recognize facial expression
Real-time facial expression analysis is an important yet challenging task in human computer interaction.
This paper proposes a real-time person independent facial expression recognition system using a
geometrical feature-based approach. The face geometry is extracted using the modified active shape
model. Each part of the face geometry is effectively represented by the Census Transformation (CT) based
feature histogram. The facial expression is classified by the SVM classifier with exponential chi-square
weighted merging kernel. The proposed method was evaluated on the JAFFE database and in real-world
environment. The experimental results show that the approach yields a high recognition rate and is
applicable in real-time facial expression analysis.
An algorithm to detect drivers
Driver's drowsiness is one of the major causes of serious accidents in road traffic. Thus, special effort in searching for better assistant technology has been paid. However, several existing approaches fail to work effectively as the head of a drowsy driver is usually in slanting state. Moreover, the shaking of vehicle or the driver's winking even makes the problem much more complicated. Anyway, head bend posture also signifies a drowsy state. Consequently, this paper proposes a novel approach by considering head nodding behavior as an input in our detection model. After detecting a human face, some significant facial features are extracted; then, they are used to calculate the predetermined optimal parameters; finally, drowsiness is
evaluated based on these thresholds. In our empirical experiments, the proposed algorithm can successfully
and accurately detect 96.56% of cases.
5116ijscmc01
Driver’s drowsiness is one of the major causes of serious accidents in road traffic. Thus, special effort in searching for better assistant technology has been paid. However, several existing approaches fail to work effectively as the head of a drowsy driver is usually in slanting state. Moreover, the shaking of vehicle or the driver’s winking even makes the problem much more complicated. Anyway, head bend posture also signifies a drowsy state. Consequently, this paper proposes a novel approach by considering head nodding behaviour as an input in our detection model. After detecting a human face, some significant facial features are extracted; then, they are used to calculate the predetermined optimal parameters; finally, drowsiness is evaluated based on these thresholds. In our empirical experiments, the proposed algorithm can successfully and accurately detect 96.56% of cases.
AN ALGORITHM TO DETECT DRIVER’S DROWSINESS BASED ON NODDING BEHAVIOUR
Driver’s drowsiness is one of the major causes of serious accidents in road traffic. Thus, special effort in
searching for better assistant technology has been paid. However, several existing approaches fail to work
effectively as the head of a drowsy driver is usually in slanting state. Moreover, the shaking of vehicle or
the driver’s winking even makes the problem much more complicated. Anyway, head bend posture also
signifies a drowsy state. Consequently, this paper proposes a novel approach by considering head nodding
behaviour as an input in our detection model. After detecting a human face, some significant facial features
are extracted; then, they are used to calculate the predetermined optimal parameters; finally, drowsiness is
evaluated based on these thresholds. In our empirical experiments, the proposed algorithm can successfully
and accurately detect 96.56% of cases.
Asymmetrical Half-Join Method on Dual Vision Face Recognition
This research proposes a model of face recognition using the method of joining two face images from left and right lens from a stereo vision camera namely half-join method. Half-join method is used in face image normalization processing. The proposed half-join method is a face images joining model, which is called asymmetrical half-join. In asymmetrical halfjoin method, a RoI (region of interest) of face image from left and right lenses are provided based on axis center of each eye in eye detection. The cropping of face image from asymmetrical half-join model has different width depends on eyes coordinate location. The proposed system shows that the asymmetrical half-join method can produce a better of face recognition rate. The experimental results show that the asymmetrical half-join method has a better recognition rate and computation time than single vision method and symmetrical half-join method.
FACIAL LANDMARKING LOCALIZATION FOR EMOTION RECOGNITION USING BAYESIAN SHAPE ...
This work presents a framework for emotion recognition, based in facial expression analysis using Bayesian Shape Models (BSM) for facial landmarking localization. The Facial Action Coding System (FACS) compliant facial feature tracking based on Bayesian Shape Model. The BSM estimate the parameters of the model with an implementation of the EM algorithm. We describe the characterization methodology from parametric model and evaluated the accuracy for feature detection and estimation of the parameters associated with facial expressions, analyzing its robustness in pose and local variations. Then, a methodology for emotion characterization is introduced to perform the recognition. The experimental results show that the proposed model can effectively detect the different facial expressions. Outperforming conventional approaches for emotion recognition obtaining high performance results in the estimation of emotion present in a determined subject. The model used and characterizationmethodology showed efficient to detect the emotion type in 95.6% of the cases.
Facial landmarking localization for emotion recognition using bayesian shape ...
This work presents a framework for emotion recognition, based in facial expression analysis
using Bayesian Shape Models (BSM) for facial landmarking localization. The Facial Action
Coding System (FACS) compliant facial feature tracking based on Bayesian Shape Model. The
BSM estimate the parameters of the model with an implementation of the EM algorithm. We
describe the characterization methodology from parametric model and evaluated the accuracy
for feature detection and estimation of the parameters associated with facial expressions,
analyzing its robustness in pose and local variations. Then, a methodology for emotion
characterization is introduced to perform the recognition. The experimental results show that
the proposed model can effectively detect the different facial expressions. Outperforming
conventional approaches for emotion recognition obtaining high performance results in the
estimation of emotion present in a determined subject. The model used and characterization
methodology showed efficient to detect the emotion type in 95.6% of the cases.
Unimodal Multi-Feature Fusion and one-dimensional Hidden Markov Models for Lo...
The objective of low-resolution face recognition is to identify faces from small size or poor quality images with varying pose, illumination, expression, etc. In this work, we propose a robust low face recognition technique based on one-dimensional Hidden Markov Models. Features of each facial image are extracted using three steps: firstly, both Gabor filters and Histogram of Oriented Gradients (HOG) descriptor are calculated. Secondly, the size of these features is reduced using the Linear Discriminant Analysis (LDA) method in order to remove redundant information. Finally, the reduced features are combined using Canonical Correlation Analysis (CCA) method. Unlike existing techniques using HMMs, in which authors consider each state to represent one facial region (eyes, nose, mouth, etc), the proposed system employs 1D-HMMs without any prior knowledge about the localization of interest regions in the facial image. Performance of the proposed method will be measured using the AR database.
Ck36515520
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Face Recognition
These papers describes Face Recognition Process using PCA Algorithm and Euclidean distance.
Face Alignment Using Active Shape Model And Support Vector Machine
The Active Shape Model (ASM) is one of the most popular local texture models for face alignment. It applies in many fields such as locating facial features in the image, face synthesis, etc. However, the experimental results show that the accuracy of the classical ASM for some applications is not high. This paper suggests some improvements on the classical ASM to increase the performance of the model in the application: face alignment. Four of our major improvements include: i) building a model combining Sobel filter and the 2-D profile in searching face in image; ii) applying Canny algorithm for the enhancement edge on image; iii) Support Vector Machine (SVM) is used to classify landmarks on face, in order to determine exactly location of these landmarks support for ASM; iv) automatically adjust 2-D profile in the multi-level model based on the size of the input image. The experimental results on CalTech face database and Technical University of Denmark database (imm_face) show that our proposed improvement leads to far better performance.
Similar to REAL-WORLD AND RAPID FACE RECOGNITION TOWARD POSE AND EXPRESSION VARIATIONS VIA FEATURE LIBRARY MATRIX (20)
ZERNIKE MOMENT-BASED FEATURE EXTRACTION FOR FACIAL RECOGNITION OF IDENTICAL T...
ZERNIKE MOMENT-BASED FEATURE EXTRACTION FOR FACIAL RECOGNITION OF IDENTICAL T...
AN EFFICIENT FEATURE EXTRACTION METHOD WITH LOCAL REGION ZERNIKE MOMENT FOR F...
AN EFFICIENT FEATURE EXTRACTION METHOD WITH LOCAL REGION ZERNIKE MOMENT FOR F...
An Efficient Feature Extraction Method With Local Region Zernike Moment for F...
An Efficient Feature Extraction Method With Local Region Zernike Moment for F...
An efficient feature extraction method with pseudo zernike moment for facial ...
An efficient feature extraction method with pseudo zernike moment for facial ...
A Novel Mathematical Based Method for Generating Virtual Samples from a Front...
A Novel Mathematical Based Method for Generating Virtual Samples from a Front...
A novel approach for performance parameter estimation of face recognition bas...
A novel approach for performance parameter estimation of face recognition bas...
Human’s facial parts extraction to recognize facial expression
Human’s facial parts extraction to recognize facial expression
AN ALGORITHM TO DETECT DRIVER’S DROWSINESS BASED ON NODDING BEHAVIOUR
AN ALGORITHM TO DETECT DRIVER’S DROWSINESS BASED ON NODDING BEHAVIOUR
Asymmetrical Half-Join Method on Dual Vision Face Recognition
Asymmetrical Half-Join Method on Dual Vision Face Recognition
FACIAL LANDMARKING LOCALIZATION FOR EMOTION RECOGNITION USING BAYESIAN SHAPE ...
FACIAL LANDMARKING LOCALIZATION FOR EMOTION RECOGNITION USING BAYESIAN SHAPE ...
Facial landmarking localization for emotion recognition using bayesian shape ...
Facial landmarking localization for emotion recognition using bayesian shape ...
Unimodal Multi-Feature Fusion and one-dimensional Hidden Markov Models for Lo...
Unimodal Multi-Feature Fusion and one-dimensional Hidden Markov Models for Lo...
Face Alignment Using Active Shape Model And Support Vector Machine
Face Alignment Using Active Shape Model And Support Vector Machine
More from I3E Technologies
Add
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Design of a low voltage low-dropout regulator
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
An efficient constant multiplier architecture based on vertical horizontal bi...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Aging aware reliable multiplier design with adaptive hold logic
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
A high performance fir filter architecture for fixed and reconfigurable appli...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
A generalized algorithm and reconfigurable architecture for efficient and sca...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
A combined sdc sdf architecture for normal i o pipelined radix-2 fft
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Reverse converter design via parallel prefix adders novel components, method...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Pre encoded multipliers based on non-redundant radix-4 signed-digit encoding
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Energy optimized subthreshold vlsi logic family with unbalanced pull up down ...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Variable form carrier-based pwm for boost-voltage motor driver with a charge-...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Ultrasparse ac link converters
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Single inductor dual-output buck–boost power factor correction converter
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Ripple minimization through harmonic elimination in asymmetric interleaved mu...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Resonance analysis and soft switching design of isolated boost converter with...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Reliability evaluation of conventional and interleaved dc–dc boost converters
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Power factor corrected zeta converter based improved power quality switched m...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Pfc cuk converter fed bldc motor drive
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Optimized operation of current fed dual active bridge dc dc converter for pv ...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Online variable topology type photovoltaic grid-connected inverter
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
More from I3E Technologies (20)
An efficient constant multiplier architecture based on vertical horizontal bi...
An efficient constant multiplier architecture based on vertical horizontal bi...
Aging aware reliable multiplier design with adaptive hold logic
Aging aware reliable multiplier design with adaptive hold logic
A high performance fir filter architecture for fixed and reconfigurable appli...
A high performance fir filter architecture for fixed and reconfigurable appli...
A generalized algorithm and reconfigurable architecture for efficient and sca...
A generalized algorithm and reconfigurable architecture for efficient and sca...
A combined sdc sdf architecture for normal i o pipelined radix-2 fft
A combined sdc sdf architecture for normal i o pipelined radix-2 fft
Reverse converter design via parallel prefix adders novel components, method...
Reverse converter design via parallel prefix adders novel components, method...
Pre encoded multipliers based on non-redundant radix-4 signed-digit encoding
Pre encoded multipliers based on non-redundant radix-4 signed-digit encoding
Energy optimized subthreshold vlsi logic family with unbalanced pull up down ...
Energy optimized subthreshold vlsi logic family with unbalanced pull up down ...
Variable form carrier-based pwm for boost-voltage motor driver with a charge-...
Variable form carrier-based pwm for boost-voltage motor driver with a charge-...
Single inductor dual-output buck–boost power factor correction converter
Single inductor dual-output buck–boost power factor correction converter
Ripple minimization through harmonic elimination in asymmetric interleaved mu...
Ripple minimization through harmonic elimination in asymmetric interleaved mu...
Resonance analysis and soft switching design of isolated boost converter with...
Resonance analysis and soft switching design of isolated boost converter with...
Reliability evaluation of conventional and interleaved dc–dc boost converters
Reliability evaluation of conventional and interleaved dc–dc boost converters
Power factor corrected zeta converter based improved power quality switched m...
Power factor corrected zeta converter based improved power quality switched m...
Optimized operation of current fed dual active bridge dc dc converter for pv ...
Optimized operation of current fed dual active bridge dc dc converter for pv ...
Online variable topology type photovoltaic grid-connected inverter
Online variable topology type photovoltaic grid-connected inverter
Recently uploaded
一比一原版(Otago毕业证)奥塔哥大学毕业证成绩单如何办理
Otago毕业证原版定制【微信：176555708】【奥塔哥大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
一比一原版(SFU毕业证)西蒙菲莎大学毕业证成绩单如何办理
SFU毕业证原版定制【微信：176555708】【西蒙菲莎大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
Governing Equations for Fundamental Aerodynamics
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Water billing management system project report.pdf
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
一比一原版(UMich毕业证)密歇根大学|安娜堡分校毕业证成绩单专业办理
UMich毕业证原版定制【微信：176555708】【密歇根大学|安娜堡分校毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
Recently uploaded (20)
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
Planning Of Procurement o different goods and services
Planning Of Procurement o different goods and services
Water billing management system project report.pdf
Water billing management system project report.pdf
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
REAL-WORLD AND RAPID FACE RECOGNITION TOWARD POSE AND EXPRESSION VARIATIONS VIA FEATURE LIBRARY MATRIX
- 1. REAL-WORLD AND RAPID FACE RECOGNITION TOWARD POSE AND EXPRESSION VARIATIONS VIA FEATURE LIBRARY MATRIX ABSTRACT In this paper, a novel method for face recognition under pose and expression variations is proposed from only a single image in the gallery. A 3D probabilistic facial expression recognition generic elastic model is proposed to reconstruct a 3D model from real-world human face using only a single 2D frontal image with/without facial expressions. Then, a feature library matrix (FLM) is generated for each subject in the gallery rom all face poses by rotating the 3D reconstructed models and extracting features in the rotated face pose. Therefore, each FLM is subsequently rendered for each subject in the gallery based on triplet angles of face poses. In addition, before matching the FLM, an initial estimate of triplet angles is obtained from the face pose in probe images using an automatic head pose estimation approach. Then, an array of the FLM is selected for each subject based on the estimated triplet angles. Finally, the selected arrays from FLMs are compared with extracted features from the probe image by iterative scoring classification using the support vector machine. Convincing results are acquired to handle pose and expression changes on the Bosphorus, Face Recognition Technology (FERET), Carnegie Mellon University- Pose, Illumination, and Expression (CMU-PIE), and Labeled Faces in the Wild (LFW) face databases compared with several state-of-the-art methods in pose- invariant face recognition. The proposed method not only demonstrates an excellent performance by obtaining high accuracy on all four databases but also outperforms other approaches realistically.