quiz/ heat
•Download as PPTX, PDF•
0 likes•624 views
The document discusses various statements about heat transfer and thermal physics, asking the reader to identify whether each statement is true or false. It also asks why a glass jar might break if filled half full with very hot water, and provides evaluation criteria for a product design challenge to create something that can withstand high temperatures and sudden temperature drops. The key topics covered are heat transfer, thermal expansion, and the risks of thermal shock.
Report
Share
Report
Share
Recommended
Transfer of heat
The document discusses heat transfer through conduction, convection, and radiation. It defines combustion as the rapid oxidation that occurs when lighting a match, producing both heat and light. Slow oxidation can cause spontaneous combustion in materials as heat builds up over time from chemical reactions with oxygen. Three elements needed for a fire are a fuel, adequate temperature, and oxygen.
3.10 all change
This document describes changes of state between solids, liquids, and gases. It explains that:
- Solids melt when heated and particles gain enough energy to overcome bonding forces, becoming a liquid. Different substances have different melting points depending on bonding strength.
- Gases condense when cooled, as slower particle motion allows intermolecular forces to attract particles together into a liquid.
- Liquids evaporate when heated, as faster particle motion overcomes bonding forces and particles escape as a gas. Evaporation leads to boiling when it occurs throughout the liquid.
- The boiling point of a liquid depends on surrounding air pressure, with lower pressure resulting in a lower boiling point.
Particle model
Particles exist in three states - solid, liquid, and gas. Solids expand when heated and contract when cooled. Liquids contract when cooled and expand when heated, though water is unique in expanding when cooled until it reaches 4 degrees Celsius. Gases contract when cooled and expand when heated, with gases expanding more than liquids when subjected to the same temperature change. Explosions occur when a gas is made to expand rapidly, creating powerful outward forces.
Nucleate boiling presentation poster (1)
This document discusses an experiment on nucleate boiling and the effect of selectively coating material with epoxy. Nucleate boiling occurs when the surface is hotter than the saturated fluid and bubbles repeatedly form, creating nucleation sites that allow heat flux and transfer to sharply increase with temperature. The goal is for the material to maintain a high heat flux as temperature increases. The experiment explores using epoxy coating on brass to create individual heating zones and irregular temperature distribution, helping the material maintain a higher heat flux at higher temperatures compared to pure brass. Results showed the epoxy coating performed better than pure material at high temperatures without reaching film boiling regime.
heat modes conduction convection radiation
This document discusses the three modes of heat transfer: conduction, convection, and radiation.
Conduction involves the direct transfer of heat between objects in contact through molecular motion. Convection involves the transfer of heat by the circulation of fluids like air and water. Radiation involves the transfer of heat through electromagnetic waves and does not require a medium. Examples of each mode are provided, such as conduction through touching a hot stove, convection through boiling water, and radiation through heat from the sun.
7.2 Heat Flow - Science Form 1
The document discusses heat flow through solids, liquids, and gases. It explains that particles in solids, liquids, and gases move faster when heated, causing the object to expand. When cooled, particles slow down and move closer together, causing contraction. Heat flows in three ways - conduction through solids, convection through liquids and gases by density changes in heated fluids, and radiation through empty space by electromagnetic waves. Demonstrations are shown of these heat transfer methods.
3+types+of+heat+transfer
There are 3 types of heat transfer: 1) conduction, which occurs through direct contact of molecules, best in solids; 2) convection, involving up/down currents in liquids and gases due to expansion/contraction of heated/cooled molecules; and 3) radiation, occurring through open space in gases by emission of electromagnetic waves.
Heat energy
heat energy is a very essential form of energy .it is very much required for almost everything in our daily life
Recommended
Transfer of heat
The document discusses heat transfer through conduction, convection, and radiation. It defines combustion as the rapid oxidation that occurs when lighting a match, producing both heat and light. Slow oxidation can cause spontaneous combustion in materials as heat builds up over time from chemical reactions with oxygen. Three elements needed for a fire are a fuel, adequate temperature, and oxygen.
3.10 all change
This document describes changes of state between solids, liquids, and gases. It explains that:
- Solids melt when heated and particles gain enough energy to overcome bonding forces, becoming a liquid. Different substances have different melting points depending on bonding strength.
- Gases condense when cooled, as slower particle motion allows intermolecular forces to attract particles together into a liquid.
- Liquids evaporate when heated, as faster particle motion overcomes bonding forces and particles escape as a gas. Evaporation leads to boiling when it occurs throughout the liquid.
- The boiling point of a liquid depends on surrounding air pressure, with lower pressure resulting in a lower boiling point.
Particle model
Particles exist in three states - solid, liquid, and gas. Solids expand when heated and contract when cooled. Liquids contract when cooled and expand when heated, though water is unique in expanding when cooled until it reaches 4 degrees Celsius. Gases contract when cooled and expand when heated, with gases expanding more than liquids when subjected to the same temperature change. Explosions occur when a gas is made to expand rapidly, creating powerful outward forces.
Nucleate boiling presentation poster (1)
This document discusses an experiment on nucleate boiling and the effect of selectively coating material with epoxy. Nucleate boiling occurs when the surface is hotter than the saturated fluid and bubbles repeatedly form, creating nucleation sites that allow heat flux and transfer to sharply increase with temperature. The goal is for the material to maintain a high heat flux as temperature increases. The experiment explores using epoxy coating on brass to create individual heating zones and irregular temperature distribution, helping the material maintain a higher heat flux at higher temperatures compared to pure brass. Results showed the epoxy coating performed better than pure material at high temperatures without reaching film boiling regime.
heat modes conduction convection radiation
This document discusses the three modes of heat transfer: conduction, convection, and radiation.
Conduction involves the direct transfer of heat between objects in contact through molecular motion. Convection involves the transfer of heat by the circulation of fluids like air and water. Radiation involves the transfer of heat through electromagnetic waves and does not require a medium. Examples of each mode are provided, such as conduction through touching a hot stove, convection through boiling water, and radiation through heat from the sun.
7.2 Heat Flow - Science Form 1
The document discusses heat flow through solids, liquids, and gases. It explains that particles in solids, liquids, and gases move faster when heated, causing the object to expand. When cooled, particles slow down and move closer together, causing contraction. Heat flows in three ways - conduction through solids, convection through liquids and gases by density changes in heated fluids, and radiation through empty space by electromagnetic waves. Demonstrations are shown of these heat transfer methods.
3+types+of+heat+transfer
There are 3 types of heat transfer: 1) conduction, which occurs through direct contact of molecules, best in solids; 2) convection, involving up/down currents in liquids and gases due to expansion/contraction of heated/cooled molecules; and 3) radiation, occurring through open space in gases by emission of electromagnetic waves.
Heat energy
heat energy is a very essential form of energy .it is very much required for almost everything in our daily life
Investigation 4 2 Liquid Expansion 2010
The document discusses concepts related to the compression and expansion of gases and liquids when subjected to changes in temperature, pressure, or kinetic energy. Specifically, it defines vocabulary terms like compression and expansion, discusses how air and solids expand when heated but liquids cannot be compressed, and asks questions about how the volume of air and solids change with temperature and how adding or removing heat from water affects its volume.
Quiz
1. Temperature is a measure of how hot or cold something is compared to a standard scale. The four main temperature scales are Celsius, Fahrenheit, Kelvin, and Richter.
2. Water freezes at 0°C and boils at 100°C on the Celsius scale. Heat will transfer from hotter to colder objects until they reach thermal equilibrium. Absolute zero is equal to -273°C.
3. When an object absorbs heat, its kinetic energy and temperature increase. Materials with higher specific heat capacity, like water, require more heat to change their temperature compared to other materials.
Grade 7 Chemistry
This document discusses thermal energy and the behavior of gases. It defines thermal energy as the total kinetic energy of particles in an object. As temperature increases, particles move faster and have more kinetic energy. Gases are discussed in terms of pressure, volume, temperature, and their relationships as defined by Boyle's and Charles' Laws. Specifically, Boyle's Law states that pressure and volume are inversely related at a constant temperature, while Charles' Law says volume and temperature are directly proportional at constant pressure.
Energy 8
Evaporation can occur with both cold and hot liquids. It is a process where molecules of a liquid escape and become a gas. Evaporation depends on the energy of individual molecules - molecules with higher energy can break away from the liquid and become a gas through evaporation. Factors like temperature, humidity, and airflow affect how quickly evaporation occurs.
What is HEAT?
This slide contains the history of heat.
It will answer your questions about heat, the sources of heat and how can affect solid, liquid and gas molecules.
3 types of heat transfer
There are 3 types of heat transfer: 1) Radiation, which transfers heat through open space and only occurs in gases. 2) Conduction, which transfers heat through direct contact between molecules and can occur in solids, liquids, and gases. It occurs best in solids. 3) Convection, which transfers heat by up and down movements of heated liquids and gases through convection currents.
Melting point
This document provides instructions on how to determine the melting point of a liquid organic compound. It lists the necessary equipment, describes safety precautions when using the Mel-Temp apparatus, and identifies factors that influence melting point such as molecular size, shape, and purity. The purpose is to use an organic compound's melting point to determine its purity, identify unknown compounds, and accurately obtain melting points using the described apparatus and procedures.
Muahhhahhahahahah
The document describes an experiment to observe the temperature changes that occur when ice melts. Key findings include:
- The temperature slowly increases as the ice melts, absorbing the heat from the Bunsen burner.
- The heat causes the ice particles to vibrate faster until melting occurs at 0°C, the melting point of ice.
- At the melting point, the temperature remains constant until all the ice is transformed into liquid water.
Heat transfer review
This document discusses heat transfer and provides explanations to practice questions about various heat transfer concepts. It explains that heat only transfers from hot to cold objects until they reach the same temperature. Heat transfer occurs through conduction, convection and radiation. Heat causes objects to expand, so a hot airplane will be slightly longer than when cold. Blowing on soup cools it through convection. Smoke rises due to convection until it reaches the temperature of room air. A cup of water in boiling water will not boil as heat transfer stops once temperatures equalize.
Transfer of heat
There are three main modes of heat transfer: conduction, convection, and radiation. Conduction involves direct contact between objects where heat is transferred through atomic vibrations. Convection involves the transfer of heat by mass motion of molecules in liquids and gases as heated parts rise and cooler parts sink. Radiation transfers heat through electromagnetic waves and does not require a medium, allowing it to occur through a vacuum. Examples of each mode in nature and their uses in applications like cooking and heating are discussed.
8th Grade Chapter 5 Lesson 2
Heat can be transferred between objects in three ways: conduction, convection, and radiation. Conduction involves direct contact between objects, convection involves the transfer of heat by a fluid like air or water, and radiation transfers heat through electromagnetic waves without a medium. Materials expand when heated as the molecules move farther apart, requiring expansion joints in bridges to allow for expansion and contraction with changes in temperature. Thermostats also use bimetallic strips that expand at different rates to sense temperature changes and regulate heating and cooling systems.
Activities pupils pp
This document contains 27 activities about heat and temperature. The activities explore concepts like heat transfer between objects at different temperatures, heat flow direction, uses of thermometers, temperature conversions, and heat transfer methods like conduction, convection and radiation. Students are asked to make observations, explanations, and comparisons to build their understanding of heat-related phenomena.
Chapter – 4 heat class_7
HEAT
TEMPERATURE
LAND BREEZE
EFFECT OF HEAT
MEASUREMENT OF TEMPERATURE
CLINICAL THERMOMETERS
DIGITAL THERMOMETERS
SEA BREEZE
TRANSFER OF HEAT
CONDUCTION
CONVECTION
CONDUCTORS AND INSULATORS
RADIATION
DARK COLOURED SURFACES AND COLOURED SURFACES
WIND
4 e heatgain
The document discusses heat gain and how it relates to temperature changes in objects. It explains that when an object gains heat, its temperature increases. Examples are given of ice melting when it gains heat from warm water or the sun. The temperature of cold water or melted ice cream also increases when they gain heat by sitting out over time. The key point is that an increase in an object's temperature occurs when that object gains heat.
Heat And Temperature Quiz 2
This document contains a heat and temperature quiz with 14 multiple choice questions about energy transfer and heat flow. The questions cover topics like where a car gets its energy to warm up, how energy flows from the sun to earth and between objects at different temperatures, how polar bears retain heat and why their coats help insulate them, and different types of heat transfer like conduction, convection and radiation.
Heat And Temperature Quiz
This document provides a heat and temperature quiz with 9 true/false questions. It instructs the reader to draw a table with 9 rectangles and mark each question as true (T) or false (F). The questions cover topics like the unit of heat, boiling points, heat transfer, phase changes, temperature records, particle motion and more.
Heat Transfer Quiz
The document is a heat transfer quiz containing 10 multiple choice questions about different heat transfer processes including conduction, convection, radiation, and properties of good conductors and radiators. Key terms covered include how radiation travels as waves, how silvering in a flask prevents heat loss by radiation, how black objects are good radiators while shiny objects are good reflectors, and examples of processes using different heat transfer methods like convection and conduction.
Heat transfer
This document discusses the three main modes of heat transfer: conduction, convection, and radiation.
Conduction involves the transfer of thermal energy through direct contact of particles within a substance or between substances. Convection involves the transfer of heat by the circulation or movement of fluids like gases and liquids. Radiation involves the transfer of heat through electromagnetic waves and does not require a medium - it can occur through a vacuum in space.
The key differences between the three types are: conduction occurs through direct contact in solids and liquids; convection occurs through fluid circulation in liquids and gases; and radiation transfers heat through electromagnetic waves without direct contact or a medium.
eSports business and law (in 20 minutes)
This document summarizes the business and law of esports. It discusses key numbers in the esports industry like viewership and revenue. It profiles major players like developers, publishers, clubs and players. It also outlines opportunities in areas like content, broadcasting and sponsorship. Finally, it notes some legal issues around commercialization, integrity and regulation that esports still needs to address as the industry evolves.
The innateness theory chomsky presentation
This document discusses Noam Chomsky's innateness theory of language acquisition. The key points are:
1) According to Chomsky, language is an innate faculty and humans are born with a "universal grammar" consisting of linguistic rules.
2) Chomsky believes that exposure to language is enough for children to acquire it, as they can learn from minimal data due to their innate linguistic knowledge.
3) The theory proposes that children have a "language acquisition device" that allows them to acquire language effortlessly and quickly despite limited teaching.
Expresión escrita y ejemplos...!!! redacción de textos
Este documento presenta diferentes formas de expresión escrita como la narrativa, descriptiva y expositiva-argumentativa. Explica cada una de estas formas y proporciona ejemplos de cada una. La narrativa se refiere al relato de hechos o historias y sus elementos clave. La descriptiva describe características de manera objetiva o subjetiva. La expositiva-argumentativa tiene el objetivo de informar y difundir conocimientos sobre un tema de manera clara y coherente.
K TO 12 GRADE 7 LEARNING MATERIAL IN SCIENCE (Q1-Q2)
This document is a student module from a 7th grade science textbook on solutions and diversity of materials in the environment. It contains 5 modules with activities to help students learn about key concepts. The activities explore common solutions found at home, properties of solutions like being able to filter out solutes, how much of a solute can dissolve in a solvent to reach saturation, and factors that affect dissolution rates of solids in water. The goal is for students to understand the characteristics of solutions and different types of mixtures.
More Related Content
What's hot
Investigation 4 2 Liquid Expansion 2010
The document discusses concepts related to the compression and expansion of gases and liquids when subjected to changes in temperature, pressure, or kinetic energy. Specifically, it defines vocabulary terms like compression and expansion, discusses how air and solids expand when heated but liquids cannot be compressed, and asks questions about how the volume of air and solids change with temperature and how adding or removing heat from water affects its volume.
Quiz
1. Temperature is a measure of how hot or cold something is compared to a standard scale. The four main temperature scales are Celsius, Fahrenheit, Kelvin, and Richter.
2. Water freezes at 0°C and boils at 100°C on the Celsius scale. Heat will transfer from hotter to colder objects until they reach thermal equilibrium. Absolute zero is equal to -273°C.
3. When an object absorbs heat, its kinetic energy and temperature increase. Materials with higher specific heat capacity, like water, require more heat to change their temperature compared to other materials.
Grade 7 Chemistry
This document discusses thermal energy and the behavior of gases. It defines thermal energy as the total kinetic energy of particles in an object. As temperature increases, particles move faster and have more kinetic energy. Gases are discussed in terms of pressure, volume, temperature, and their relationships as defined by Boyle's and Charles' Laws. Specifically, Boyle's Law states that pressure and volume are inversely related at a constant temperature, while Charles' Law says volume and temperature are directly proportional at constant pressure.
Energy 8
Evaporation can occur with both cold and hot liquids. It is a process where molecules of a liquid escape and become a gas. Evaporation depends on the energy of individual molecules - molecules with higher energy can break away from the liquid and become a gas through evaporation. Factors like temperature, humidity, and airflow affect how quickly evaporation occurs.
What is HEAT?
This slide contains the history of heat.
It will answer your questions about heat, the sources of heat and how can affect solid, liquid and gas molecules.
3 types of heat transfer
There are 3 types of heat transfer: 1) Radiation, which transfers heat through open space and only occurs in gases. 2) Conduction, which transfers heat through direct contact between molecules and can occur in solids, liquids, and gases. It occurs best in solids. 3) Convection, which transfers heat by up and down movements of heated liquids and gases through convection currents.
Melting point
This document provides instructions on how to determine the melting point of a liquid organic compound. It lists the necessary equipment, describes safety precautions when using the Mel-Temp apparatus, and identifies factors that influence melting point such as molecular size, shape, and purity. The purpose is to use an organic compound's melting point to determine its purity, identify unknown compounds, and accurately obtain melting points using the described apparatus and procedures.
Muahhhahhahahahah
The document describes an experiment to observe the temperature changes that occur when ice melts. Key findings include:
- The temperature slowly increases as the ice melts, absorbing the heat from the Bunsen burner.
- The heat causes the ice particles to vibrate faster until melting occurs at 0°C, the melting point of ice.
- At the melting point, the temperature remains constant until all the ice is transformed into liquid water.
Heat transfer review
This document discusses heat transfer and provides explanations to practice questions about various heat transfer concepts. It explains that heat only transfers from hot to cold objects until they reach the same temperature. Heat transfer occurs through conduction, convection and radiation. Heat causes objects to expand, so a hot airplane will be slightly longer than when cold. Blowing on soup cools it through convection. Smoke rises due to convection until it reaches the temperature of room air. A cup of water in boiling water will not boil as heat transfer stops once temperatures equalize.
Transfer of heat
There are three main modes of heat transfer: conduction, convection, and radiation. Conduction involves direct contact between objects where heat is transferred through atomic vibrations. Convection involves the transfer of heat by mass motion of molecules in liquids and gases as heated parts rise and cooler parts sink. Radiation transfers heat through electromagnetic waves and does not require a medium, allowing it to occur through a vacuum. Examples of each mode in nature and their uses in applications like cooking and heating are discussed.
8th Grade Chapter 5 Lesson 2
Heat can be transferred between objects in three ways: conduction, convection, and radiation. Conduction involves direct contact between objects, convection involves the transfer of heat by a fluid like air or water, and radiation transfers heat through electromagnetic waves without a medium. Materials expand when heated as the molecules move farther apart, requiring expansion joints in bridges to allow for expansion and contraction with changes in temperature. Thermostats also use bimetallic strips that expand at different rates to sense temperature changes and regulate heating and cooling systems.
Activities pupils pp
This document contains 27 activities about heat and temperature. The activities explore concepts like heat transfer between objects at different temperatures, heat flow direction, uses of thermometers, temperature conversions, and heat transfer methods like conduction, convection and radiation. Students are asked to make observations, explanations, and comparisons to build their understanding of heat-related phenomena.
Chapter – 4 heat class_7
HEAT
TEMPERATURE
LAND BREEZE
EFFECT OF HEAT
MEASUREMENT OF TEMPERATURE
CLINICAL THERMOMETERS
DIGITAL THERMOMETERS
SEA BREEZE
TRANSFER OF HEAT
CONDUCTION
CONVECTION
CONDUCTORS AND INSULATORS
RADIATION
DARK COLOURED SURFACES AND COLOURED SURFACES
WIND
4 e heatgain
The document discusses heat gain and how it relates to temperature changes in objects. It explains that when an object gains heat, its temperature increases. Examples are given of ice melting when it gains heat from warm water or the sun. The temperature of cold water or melted ice cream also increases when they gain heat by sitting out over time. The key point is that an increase in an object's temperature occurs when that object gains heat.
What's hot (14)
Viewers also liked
Heat And Temperature Quiz 2
This document contains a heat and temperature quiz with 14 multiple choice questions about energy transfer and heat flow. The questions cover topics like where a car gets its energy to warm up, how energy flows from the sun to earth and between objects at different temperatures, how polar bears retain heat and why their coats help insulate them, and different types of heat transfer like conduction, convection and radiation.
Heat And Temperature Quiz
This document provides a heat and temperature quiz with 9 true/false questions. It instructs the reader to draw a table with 9 rectangles and mark each question as true (T) or false (F). The questions cover topics like the unit of heat, boiling points, heat transfer, phase changes, temperature records, particle motion and more.
Heat Transfer Quiz
The document is a heat transfer quiz containing 10 multiple choice questions about different heat transfer processes including conduction, convection, radiation, and properties of good conductors and radiators. Key terms covered include how radiation travels as waves, how silvering in a flask prevents heat loss by radiation, how black objects are good radiators while shiny objects are good reflectors, and examples of processes using different heat transfer methods like convection and conduction.
Heat transfer
This document discusses the three main modes of heat transfer: conduction, convection, and radiation.
Conduction involves the transfer of thermal energy through direct contact of particles within a substance or between substances. Convection involves the transfer of heat by the circulation or movement of fluids like gases and liquids. Radiation involves the transfer of heat through electromagnetic waves and does not require a medium - it can occur through a vacuum in space.
The key differences between the three types are: conduction occurs through direct contact in solids and liquids; convection occurs through fluid circulation in liquids and gases; and radiation transfers heat through electromagnetic waves without direct contact or a medium.
eSports business and law (in 20 minutes)
This document summarizes the business and law of esports. It discusses key numbers in the esports industry like viewership and revenue. It profiles major players like developers, publishers, clubs and players. It also outlines opportunities in areas like content, broadcasting and sponsorship. Finally, it notes some legal issues around commercialization, integrity and regulation that esports still needs to address as the industry evolves.
The innateness theory chomsky presentation
This document discusses Noam Chomsky's innateness theory of language acquisition. The key points are:
1) According to Chomsky, language is an innate faculty and humans are born with a "universal grammar" consisting of linguistic rules.
2) Chomsky believes that exposure to language is enough for children to acquire it, as they can learn from minimal data due to their innate linguistic knowledge.
3) The theory proposes that children have a "language acquisition device" that allows them to acquire language effortlessly and quickly despite limited teaching.
Expresión escrita y ejemplos...!!! redacción de textos
Este documento presenta diferentes formas de expresión escrita como la narrativa, descriptiva y expositiva-argumentativa. Explica cada una de estas formas y proporciona ejemplos de cada una. La narrativa se refiere al relato de hechos o historias y sus elementos clave. La descriptiva describe características de manera objetiva o subjetiva. La expositiva-argumentativa tiene el objetivo de informar y difundir conocimientos sobre un tema de manera clara y coherente.
K TO 12 GRADE 7 LEARNING MATERIAL IN SCIENCE (Q1-Q2)
This document is a student module from a 7th grade science textbook on solutions and diversity of materials in the environment. It contains 5 modules with activities to help students learn about key concepts. The activities explore common solutions found at home, properties of solutions like being able to filter out solutes, how much of a solute can dissolve in a solvent to reach saturation, and factors that affect dissolution rates of solids in water. The goal is for students to understand the characteristics of solutions and different types of mixtures.
Heat Transfer
Heat transfer is the movement of heat energy from warmer objects to cooler ones. There are three main types of heat transfer: conduction, convection, and radiation. Conduction involves the direct contact and transfer of heat between molecules. Convection is the transfer of heat by the movement of fluids like gases and liquids. Radiation involves the transfer of heat through electromagnetic waves without direct contact between objects.
Number system part 1
The document discusses different numeric representation systems used in computing, including decimal, binary, octal, and hexadecimal. It explains key concepts such as positional notation, where the position of a digit determines its value; radix/base, which is the set of digits used; and weighting factors, where each digit position is multiplied by a power of the base to determine its value. Integer, floating point, and fixed point numbers are also defined in terms of how many bits are used for integer and fractional portions.
Organization structure in international business
The document discusses different types of organizational structures used in international business. It describes centralization versus decentralization and the tradeoffs of each. There are five main types of organizational structures covered: functional structure, international division structure, product division structure, geographic (area) division structure, and matrix division structure. Each structure has advantages and disadvantages for coordinating and responding to activities in different markets and geographies.
Viewers also liked (11)
Expresión escrita y ejemplos...!!! redacción de textos
Expresión escrita y ejemplos...!!! redacción de textos
K TO 12 GRADE 7 LEARNING MATERIAL IN SCIENCE (Q1-Q2)
K TO 12 GRADE 7 LEARNING MATERIAL IN SCIENCE (Q1-Q2)
Similar to quiz/ heat
Heat
This document provides an overview for a grade 7 science lesson plan on heat transfer through conduction, convection and radiation. It outlines the curriculum expectations, prior knowledge, demonstrations, experiments, misconceptions, safety considerations, and a 5-day lesson plan that includes exploring the particle model and the three methods of heat transfer. Societal applications are also discussed to help students understand the real-world relevance.
HEAT
HOW HEAT RELATED TO THERMAL ENERGY
EFFECT OF HEAT
TEMPERATURE
TYPES OF THERMOMETER
HEAT TRANSFER
-Conduction
-Convection
- Radiation
Heat
This document outlines a lesson plan on heat that covers curriculum expectations, prior knowledge, demonstrations, and assessments. It discusses key concepts like the particle theory of solids, liquids, and gases. Experiments are proposed to show how heat causes expansion and convection currents. Misconceptions about particle size and heat transfer mechanisms are addressed. Societal applications involving heat transfer are also described.
Heat energy
What is HEAT?
Form of energy and measured in JOULES
Particles move about more and take up more room if heated – this is why things expand if heated
It is also why substances change from: solids liquids gases when heated
Heat, temperature, thermometric scales
This document discusses different concepts relating to heat and temperature. It defines thermal energy as the kinetic energy resulting from the random motion of atoms and molecules. Heat is defined as a transfer of energy between systems or objects due to a temperature difference. The document discusses three main ways heat can be transferred: conduction through direct contact between objects, convection through fluid motion, and radiation through electromagnetic waves. It also discusses temperature as a measure of particle kinetic energy and introduces different thermometric scales like Fahrenheit, Celsius and Kelvin that are used to measure temperature.
ch3.pdf
The document discusses heat transfer and thermal equilibrium. It begins by explaining that thermal equilibrium occurs between two objects when there is no net flow of heat between them, and the objects reach the same temperature. It then discusses specific heat capacity, which is the amount of heat required to change a substance's temperature by one degree Celsius. Substances with higher specific heat capacity absorb more heat before their temperature increases. The document provides examples of applications that take advantage of varying specific heat capacities.
Heat demo
This document discusses heat transfer and the different methods by which heat is transferred. It defines heat as energy transferred between objects of different temperature, and explains that heat always flows from warmer to cooler objects. The three main methods of heat transfer are conduction, convection, and radiation. Conduction involves direct contact between objects, convection occurs through fluid movement, and radiation uses electromagnetic waves to transfer heat across empty space.
How heat travels g3
1. The document discusses how heat is a form of energy that causes materials to get warmer. It can be transferred through solids, liquids, gases and space.
2. Heat flows from warmer objects to cooler ones, and can cause materials to expand when heated and contract when cooled. Good conductors allow heat to flow easily while insulators do not.
3. The document provides examples of how different forms of energy can change into heat energy, such as friction from rubbing hands or chemical energy being released as heat during combustion.
Copy of Heat and Temperature.pptx
This document provides information about a regional training for teachers on the topics of temperature and heat. It includes an agenda for the training which takes place from June 23 to July 4, 2018. The training will focus on differentiating between heat and temperature on a molecular level and how temperature affects the speed of particles and materials. Hands-on activities are planned to demonstrate various concepts related to heat transfer and temperature change.
Module 5 heat
Thermal energy is the energy possessed by objects due to the movement of particles. Heat is a form of energy that is transferred as thermal energy moves. There are three main modes of heat transfer: conduction, convection, and radiation. Conduction involves heat transfer through direct contact between objects. Convection involves the circulation and movement of heated particles in fluids like liquids and gases. Radiation involves the emission of electromagnetic waves and can occur through a vacuum without direct contact between objects.
Nucleate boiling presentation poster (1)
This document summarizes an experiment on nucleate boiling and the effect of selectively coating material surfaces with epoxy. Nucleate boiling occurs when the surface temperature is higher than the saturated fluid temperature, causing bubbles to form and heat transfer to increase sharply with temperature. The goal is to find a way for the material to maintain a high heat flux as the temperature increases. The experiment explores using an epoxy coating on brass samples, finding that it forms isolated heating zones allowing higher heat flux at higher temperatures compared to an uncoated sample. In conclusion, a material coated with epoxy can operate at much higher temperatures than pure material during nucleate boiling.
Unit c heattemperaturenotes
This document discusses heat and temperature. It defines heat as a form of energy that flows from hot to cold objects. Temperature is defined as a measurement of how hot or cold something is, which is related to the average kinetic energy of its particles. The document also discusses states of matter, how heat affects the movement and volume of particles, and the different methods of heat transfer - conduction, convection, and radiation. It provides examples of natural and renewable sources of thermal energy as well as alternatives to fossil fuels for heating systems.
Lecture 10
1) Temperature is a measure of the average kinetic energy of particles in a substance. Higher temperatures mean particles are moving faster.
2) Absolute zero is the point where particles have no kinetic energy. Doubling the temperature doubles the average kinetic energy.
3) Heat is the transfer of thermal energy between objects due to a temperature difference. Heat flows from hotter to colder objects until thermal equilibrium is reached.
Thermal Energy and Heat_3.ppt
1) Thermal energy is the total kinetic energy of particles in a substance and is measured in joules. Temperature is related to the average kinetic energy and is what is measured, while thermal energy is the total kinetic energy.
2) Heat is the transfer of energy from warmer objects to cooler ones and always flows from hot to cold. It is transferred by conduction (direct contact), convection (movement of fluids), and radiation (electromagnetic waves).
3) Adding or removing heat can change the temperature of an object and cause phase changes from solid to liquid to gas. Various materials and methods are used to control heat flow through conduction, convection, and radiation.
Lesson 5: Heat as a Form of Energy
1. Heat is a form of energy that can be produced through various means like friction, burning, electricity, bending metals, and chemical reactions.
2. Heat travels from hotter objects to cooler ones through three methods: conduction, convection, and radiation.
3. Natural phenomena like sea breezes and land breezes occur due to differences in heating and cooling of land and water by the sun. Buildings can also be kept cool through ventilation and use of insulators.
2º ESO UNITt 1 HEAT. NOTES
1. The document discusses heat transfer and related concepts including matter, energy, temperature, and the different types of heat transfer.
2. It defines key terms like thermal energy, temperature, heat, conduction, convection, and radiation. Thermal energy is the kinetic energy of particles, temperature measures thermal energy, and heat is the transfer of thermal energy between objects.
3. Heat transfer occurs through conduction, convection, or radiation. Conduction requires contact, convection occurs through fluid movement, and radiation transfers heat through electromagnetic waves without contact.
Ohsm science1 q2 module4
This document provides an overview of an integrated science course module on force, motion, and energy. The module focuses on energy transfer and includes lessons on energy, temperature and heat, and work, power, and efficiency. Students will explore these topics through pre-assessments, activities demonstrating different types of energy transfer, and summative evaluations. The goal is for students to develop a deeper understanding of energy and related concepts through hands-on learning experiences and self-reflection on their knowledge.
Transmission of heat. Conduction, Convection, Radiation, Applications, Workin...
Heat is the thermal energy that flows from an object at higher temperature to an object at lower temperature.
The transfer of heat energy from one object to the other is called transmission of heat. Heat energy transfers in three ways,
1. Conduction
2. Convection
3. Radiation
Conduction
If one end of a metal rod is heated with a flame,
the other end will also get heated up after a while. The heat energy is transferred from one end of the rod to the other without the actual movement of particles (atoms or molecules) of the rod. Such a mode of transmission of heat is called conduction.
The transfer of heat through matter without the actual movement of particles from their position is called conduction.
Conduction occurs in solids, liquids and gases, but solids usually conduct heat better than liquids or gases.
In solids, the particles are held very close to each other. They vibrate constantly. When we heat one part of a solid, the particles gain heat energy and start vibrating faster. During their vibration they collide nearby particles and also cause them to vibrate fast. In this way, the particles of hot part of a solid transfer heat to those in the colder parts.
Good and Bad Conductors
Different materials conduct heat at different rates. Materials which allow heat to flow through them easily are called good conductors of heat. Solids such as metals are good conductors of heat.
Materials which do not allow heat to flow through them easily are called bad conductors of heat or heat insulators. Solids such as wood, glass, plastic, styrofoam, etc. are bad conductors of heat. All liquids (except mercury which is a liquid metal) and gases are also bad conductors of heat.
Why metals are better conductors than non-metals?
All solids (metals and non-metals) are made of tiny particles called molecules. But, some solids conduct heat better than others. Put a metal and a plastic spoon in hot water. Which one is a good conductor of heat, metal or plastic? When both spoons receive heat energy, the particles (atoms or molecules) at the hot end of each spoon vibrate fast and collide into neighbouring particles. These particles transfer heat energy to next neighboring particles.
Particles in metals are packed more closely together than non-metals. Metals can transmit heat energy more readily than non-metals (wood, plastic, etc.). The presence of free electrons also speeds up the transfer of heat in metals. When the metal spoon gets heated, the free electrons gain kinetic energy and move farther towards the colder parts of the metal spoon. They collide the atoms in the colder parts and transfer heat energy to them. In metals, heat energy is transferred from one place to another both by the vibrations of particles as well as by the movement of free electrons. That is why metals are good conductors of heat than non-metals(insulators).
Conduction in Liquids and Gases
The process of conduction in liquids and gases is very slow as compared to solids.
Heat
Heat is a form of energy that causes particles to move faster and take up more space, causing materials to expand when heated. Heat comes from sources like the sun, fire, light bulbs, and rubbing objects together. Temperature measures the thermal energy or "hotness" of an object using degrees Celsius and heat transfers from hotter to cooler objects. Thermometers are used to measure temperature while conductors easily transfer heat and insulators do not.
Heat
Heat is a form of energy that causes particles to move faster and take up more space, causing materials to expand when heated. Heat comes from sources like the sun, fire, and friction between objects. Temperature measures how hot an object is and is determined by its thermal energy - as objects gain heat they get hotter while losing heat makes them cooler. Heat always flows from warmer objects to cooler ones, as seen when a warm cup of water placed in a cooler room loses heat and cools down over time. Thermometers are used to measure temperature while conductors easily allow heat transfer and insulators do not.
Similar to quiz/ heat (20)
Transmission of heat. Conduction, Convection, Radiation, Applications, Workin...
Transmission of heat. Conduction, Convection, Radiation, Applications, Workin...
Recently uploaded
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
skeleton System.pdf (skeleton system wow)
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"National Information Standards Organization (NISO)
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.Bossa N’ Roll Records by Ismael Vazquez.
Bossa N Roll Records presentation by Izzy Vazquez for Music Retail and Distribution class at Full Sail University
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as discipline
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Benner "Expanding Pathways to Publishing Careers"
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Stack Memory Organization of 8086 Microprocessor
The stack memory organization of 8086 microprocessor.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Recently uploaded (20)
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
quiz/ heat
- 2. I. Write T if the statement is True and F if the statement is false.
- 3. 1. When materials is heated they expand..
- 4. 2.Heat is transferred from cold body to warm body.
- 5. 3. All material absorbs heat in the same time.
- 6. 4. When heat is applied molecules vibrate faster
- 7. 5. Temperature is a kind of energy.
- 8. 6.Heat is measured in Joules.
- 9. 7. When water is heated it becomes gas.
- 10. 8. Thermal Expansion is the ability of materials to raise the temperature at 1K
- 11. 9. Wood is a good conductor of heat.
- 12. 10. Heat energy of the sun reaches the earth through convection
- 13. 10. Heat energy of the sun reaches the earth through convection
- 15. 2. Why would a glass jar break if filled half full with very hot water?
- 16. Product: You are a product designer. A manufacturing company commissioned you to design a product that can withstand very high temperature and immediate temperature drop. You will evaluated based on the following Criteria: Creativity- 10 Originality -10 Efficiency of the product- 10