Qiod Quality inspection services , we inspect all type of apparels and home furnishing and home decoration products

1. Quality inspection on
demand
QIOD INSPECTION SERVISE
JB 18 F HARI ENCLAVE
HARI NAGAR, NEW DELHI 11064
Ph +919810461683 , +9145587683
E-mail - simonpta@gmail.com
A division of LOL Clothing company
Quality Inspections On
DemandWe are in to Apparel, Home Textiles, Home
Decoration , Home deco hard goods Inspections.

2. DThe Quality People
1. All fabric lots must be tested for
shrinkage with patterns/markers
adjusted to meet required
specifications.
Some recommended
quality tips from
QIOD Inspections.

3. The Quality People
2. Before spreading, fabric should
be removed from the bolt and
placed in
relaxing boxes for a minimum of 24
hours.

4. The Quality People
3. Fabric should be
spread evenly with
uniform tension. Do not
pull or
stretch fabric as it will
distort the cut pieces.

5. The Quality People
4. After being spread, fabric must rest for
a minimum of 24 hours before cutting.

6. The Quality People
5. The maximum
height of lays for
cutting is 80 pieces
or 6" depending
on the type of
fabric.

7. The Quality People
6. Recommended standard seam allowance is 3/8"
with 1/8" trim off.
Finished seams should be 1/4".

8. The Quality People
7. All sewing needles
must be ball point.
Singer use 9-14, Metric
use 90- 70, Union Special
use 027-036.

9. The Quality People
8.For better result , core spun (Coats will be
Epic, A&E will be Perma Core) sewing thread
will be used on all seams and topstitching.
Thread
size: Light weight use T-24 (metric M-120),
Medium weight must use T-40
(metric M-75). But it depend on styling .

10. The Quality People
9. Fusible of interlining
must be use from good
quality .

11. The Quality People
10. Fusing equipment must be
checked four times during
each eight
hours of operation for
temperature and cleanliness of
fusing surface. All
tests to be documented and
available for inspection.
11. Standard fusible color:
white on white/light colors;
charcoal on
medium/dark colors.

12. The quality People
12. Zippers must be used good
quality like YKK, Ideal etc

13. The Quality People
13. All irons must have a
Teflon shoe. All pressing
tables must have a
polyester pad with a silicon
cover. Pressing cloths on
steam tables must
be changed daily and the
pads aired out to dry over
night.

14. The Quality People
14. Garments are
to be steamed
only and lightly
pressed when
necessary
15. No hard
pressing is
allowed, ghosting
of seams and
necklines onto
opposite panels
is not acceptable

15. The Quality People
• 16. For a nap
fabric you must
use a needle
board
16. For a nap fabric
you must use a
needle board.
• 17. Velour or
velvet fabric is
cut with the nap
up.
17. Velour or velvet
fabric is cut with
the nap up.

16. The Quality People
18 , Embroidery must use a tear-away or water
soluble backing and it must be completely
removed. There can not be any residue left on
the garment. All loose threads must be
trimmed on embroidery.
19
• Embroidery threads cannot have jump
threads longer than ½” on the back side

17. The quality People
21 , EPIC
thread from
Coats must be
used when
attaching beads
and sequins on
the garment.
20, Beading
and sequins
must be
knotted every
3/4".

18. The Quality People
22All stripes are to match at the side
seams of the front and back
panels. Stripes will match at center front
and center back of seamed.

19. .
QIOD
Quality Inspection On Demand
QIOD
JB 18 F, Hari Enclave, Hari Nagar , New Delhi
110064.
Ph +919810461683 , 01145587683
E-Mail :- simonpta@gmail.com,
qiod_insp@gmail.com
Quality Inspections On Demand
We are in to Apparel, Home textails,Home
Decoration , Home deco hard goods Inspections.
A Division of lol clothing Company