7.
Different color and dyestuff must be prepared carefully
from the dye lab.
Receipt will be formed for dyeing process.
7
Colour Formulation
lab dip In SQ Hues
12.
One of the important step before panel making is
cone winding & lubrication.
The cone winding is to remove dust, dirt or fault
on the yarn before knitting.
The lubrication is to reduce the yarn friction
before knitting.
It is important the wax should be free of dust and
rotated freely during the winding process.
12
Cone winding &
lubrication
16.
The first step is to make the panel knitting either
by Computer Knitting machine or hand machine.
The decision to make by computer or hand
machine is depended on the complexity of the
design.
The panel making includes front, back and sleeve
, placket.
Sometimes, intarsia design will be done.
16
Panel Making
21.
Linking is to connect different panels (front, back and
sleeve) together to form a garment.
Loop to loop connection is done manually for high
quality garment.
For lower quality, a simple sewing can be done.
21
Linking process
26.
After the linking process (front, back and sleeve
are joined together), 2nd
fabric inspection will be
carried out.
The inspected garment will go to washing and
finishing.
This will improve the softness and hand free of
the sweater before final inspection and packing.
26
Washing & Drying
42.
Panel making for front, back and sleeve
First inspection and remove draw thread
Linking process to make a garment
Second inspection before washing
Washing and finishing
Final inspection and pressing
Packing for shipment.
42
Summary (1)
43. Additional processes are needed.
Waxing the yarn before knitting
Hank dyeing or cone dyeing before knitting.
Make decision if the panel is to be knitted by
computer machine.
Sample preparation is normally done by hand
machine but here use Computerized machine.
it will be develop gradually when I collect
picture from floor.
The end
43
Summary (2)