Photogrammetry - Stereoscopic Parallax
•
0 likes•240 views
Parallax Apparent shift in the position of an object, with respect to a frame of reference, caused by a shift in the position of observation. Change in position of an image from one photo to the next is caused by aircraft’s motion. – Called stereoscopic parallax, x parallax, or simply parallax Parallax of any point is directly related to the elevation of the point. Parallax is greater for high points than for low points. Stereoscopic Parallax Stereoscopic parallax is caused by taking photographs of the same object but from different points of observation. Note the displacement between the top and base of the storage towers in this photo stereo-pair. Parallax of Principal Point Parallax of left ground principal point is photo base b’ measured on right photo, and the parallax of right ground principal point is photo base b measured on left photo. For moderate relief, b ≈ b’ Photo base is average of two values Photographic Flight-Line Axes for Parallax Measurement Parallax is occurred along the flight-line. Photographic x and x′ axes for parallax measurement must be parallel with the flight line. Flight line is the line connecting the two principal points. The y and y′ axes for parallax measurement pass through their respective principal points and are perpendicular to the flight line. Monoscopic Methods of Parallax Measurement Direct measurement of x and x' on the left and right photos, respectively. By fastening the photographs down on a table: flight lines O_1 O_2 and O_1'O_2' are marked as usual. Now parallax is P_b=D-d_(b ) Stereoscopic Methods of Parallax Measurement Stereoscope is used with a parallax bar, or a stereometer for calculation. D = spacing between principal points C= the parallax bar constant. K = the distance from the fixed mark to the index mark of the parallax. Parallax pf Point A =P_a=X_a'-X_a=D-(K-r_a)=(D-K)+r_a
Report
Share
Report
Share
Download to read offline
Recommended
Photogrammetry: Stereoscopy and Parallax
This literature review talks about the principles of stereoscopy and the stereoscopic instruments used, in addition to the steps for correcting the rotation of photos under the stereoscope, then talks about the Y-Parallax which result of Principal points line not parallel with Flight line. also, the stereoscopic parallax principles and it's measurement.
Photogrammetry-part 2
Geometry of Aerial photographs – Tilt, Swing,
Photo nadir, Principle points,
Principal distance, flying height, air base, overlaps, side laps,
Flight planning (aerial Photogrammetry)
flight Planning , Focal length of Camera , time of exposure,ground speed of aircraft, area to be covered
Introduction to Aerial Photogrammetry
Aerial surveying technology is utilized in a wide range of fields throughout the world. These range from the creation of maps, to terrain analysis and research (rivers, soil erosion, coasts, etc.), urban planning, road planning (roads, rails, etc.), and vegetation research (forests, agriculture, lakes and marshland, etc.).
Recommended
Photogrammetry: Stereoscopy and Parallax
This literature review talks about the principles of stereoscopy and the stereoscopic instruments used, in addition to the steps for correcting the rotation of photos under the stereoscope, then talks about the Y-Parallax which result of Principal points line not parallel with Flight line. also, the stereoscopic parallax principles and it's measurement.
Photogrammetry-part 2
Geometry of Aerial photographs – Tilt, Swing,
Photo nadir, Principle points,
Principal distance, flying height, air base, overlaps, side laps,
Flight planning (aerial Photogrammetry)
flight Planning , Focal length of Camera , time of exposure,ground speed of aircraft, area to be covered
Introduction to Aerial Photogrammetry
Aerial surveying technology is utilized in a wide range of fields throughout the world. These range from the creation of maps, to terrain analysis and research (rivers, soil erosion, coasts, etc.), urban planning, road planning (roads, rails, etc.), and vegetation research (forests, agriculture, lakes and marshland, etc.).
Aerial Photogrammetry 01
Defination, Objectives, Classification, Comparision of map & Aerial Photograph & Types of Aerial photographs
Photogrammetry Surveying, its Benefits & Drawbacks
Learn the Photogrammetry Surveying and benefits-drawbacks of photogrammetry. Photogrammetry is the process of generating a 3D model from a set of 2D photographs. In Surveying, this is done by taking two or more images of the same point from different angles
Topic stereoscopy, Parallax, Relief displacement
stereoscopic principles, calculation of height with parallax and relief displacement, mosaic and maps, mosaic vs maps
Photogrammetry - Space Resection by Collinearity Equations
Space resection is commonly used to determine the exterior orientation parameters (which refers to position and orientation related to an exterior coordinate system) associated with one or more photos based on measurements of ground control points (GCPs). space resection is a nonlinear problem, existing methods involve linearization of the collinearity condition and the use of an iterative process to determine the final solution using the least-squares method. The process also requires initial approximate values of the unknown parameters, some of which must be estimated by another least-squares solution.
Lecture01: Introduction to Photogrammetry
This is an introduction to Photogrammetry. Lectures prepared for Duhok University's students, surveyign Department.
Notes on MATLAB - Basic Cheatsheet
MATLAB NOTES
To create a matrix that has multiple rows, separate the rows with
semicolons.
>> a = [1 2 3; 4 5 6; 7 8 10]
a =
1 2
4 5
3
6
7 8 10
Another way to create a matrix is to use a function, such as ones, zeros,
or rand. For example, create a 5-by-1 column vector of zeros.
>> z = zeros(5,1)
z =
0
0
0
0
0
>> z = ones(5,2)
z =
1 1
1 1
1 1
1 1
1 1
>> z = rand(5,3)
z =
0.8147 0.0975 0.1576
0.9058 0.2785 0.9706
0.1270 0.5469 0.9572
0.9134 0.9575 0.4854
0.6324 0.9649 0.8003
To transpose a matrix, use a single quote ('):
>> a'
ans =
1 4 7
2 5 8
3 6 10
>> a + 10
4
ans =
11 12 13
14 15 16
17 18 20
To perform element-wise multiplication rather than matrix
multiplication, use the .* operator:
>> p = a.*a
p =
1 4 9
16 25 36
49 64 100
To perform Natural Matrix multiplication, use the * operator:
>> a * a
ans =
30 36 45
66 81 102
109 134 169
MATLAB NOTES
Concatenation
>> A = [a,a]
A =
1 2 3 1 2 3
4 5 6 4 5 6
7 8 10 7 8 10
>> A = [a; a]
A =
1 2 3
4 5 6
7 8 10
1 2 3
4 5 6
7 8 10
When you want to access selected elements of an array, use indexing.
>> a(2,2)
ans =
5
5
MATLAB NOTES
use a single subscript that traverses down each column in order:
>> a(6)
ans =
8
The colon operator also allows you to create an equally spaced vector
of values using the form start:step:end.
>> b = 0:20:200
b =
0 20 40 60 80 100 120 140 160 180 200
sqrt(X) is the square root of the elements of X. Complex results are
produced if X is not positive.
>> sqrt((-2:2)')
Hydrographic Surveying : Safe Navigation
SAFE NAVIGATION ON THE NILE RIVER TEAM (6) MEMBERS AHMED YASSER AHMED MOHAMED NASSAR HOSSAM HASSAN RAMADAN HASSAN AHMED FAYEZ MOHAMED AHMED AHMED MOHAMED MESBAH ELSAYED AHMED ABDEL-RAHMAN GALAL ABSTRACT Millions of tons of cargo is transported over the Nile River yearly. Hundreds of Nile Cruises (Floating Hotels)operating between Luxor and Aswan. the Egyptian government gives a high priority to the improvement of safety of navigation on the Nile River. Cargo Ship Nile Cruise INTRODUCTION Transport on Nile River is for: Goods and Materials Tourists and Passengers INTRODUCTION SAFE VISUAL NAVIGATION implementation of hydrographic survey. cost effective solar-powered visual aids to navigation. Together with further development of infrastructure works along the Nile River. vessel tracking system for Nile cruise ships for lock passage planning and emergency cases. PROBLEMS OF Long duration of transport due to daylight navigation only NAVIGATION LOW FLOW OF CARGO REASONS: Unreliability of the river; no technical means for safe navigation in the navigable channel. Poor quality of services Unreliable delivery times due to grounding or technical failures of the barges. Poor quality of barges. AIM Is to define and design the main steps that should be followed now and, in the future, to achieve safe visual navigation on the Nile River. Considering (IHO) standards for hydrographic survey. HYDROGRAPHIC DATA ACQUISITION Data ACQUISITION Water level records Data Collection Vertical Position Horizontal Position Data Logging Data Processing Shoreline Survey Ortho-photos-Coordinates of First Order Points DATA ACQUISITION WATER LEVEL RECORDS Ministry of Public Works and Water Resources maintains a series of Staff Gauges along the Nile River from Aswan to the Mediterranean Sea. . The MPWWR can provide the water level reading daily. Overall, station readings are sufficient for the need of hydrographic survey. DATA ACQUISITION WATER LEVEL RECORDS Tide Guage DATA ACQUISITION VERTICAL (DEPTH) POSITION The flow depth is recorded referring to the bed level. The output data in form of chart . The output depth in the form of digital data is logged into data logger. DATA ACQUISITION HORIZONTAL POSITION boats are equipped with GPS antenna and controller. A reference installed GPS station is over a defined controlling point. Momentarily, The corrected horizontal position is logged into data logger to be integrated with vertical position. DATA ACQUISITION DATA LOGGING Data from DGPS system and digital depths from Echo sounder are logged in an ISAH data logging system (Integrated System for Hydrography). Automated DATA PROCESSING Sounding and position data are saved then processed workstation. then depths and positions are plotted on the screen and erroneous data are rejected. To produce navigation charts, depths were set to the chart datum .
More Related Content
What's hot
Aerial Photogrammetry 01
Defination, Objectives, Classification, Comparision of map & Aerial Photograph & Types of Aerial photographs
Photogrammetry Surveying, its Benefits & Drawbacks
Learn the Photogrammetry Surveying and benefits-drawbacks of photogrammetry. Photogrammetry is the process of generating a 3D model from a set of 2D photographs. In Surveying, this is done by taking two or more images of the same point from different angles
Topic stereoscopy, Parallax, Relief displacement
stereoscopic principles, calculation of height with parallax and relief displacement, mosaic and maps, mosaic vs maps
Photogrammetry - Space Resection by Collinearity Equations
Space resection is commonly used to determine the exterior orientation parameters (which refers to position and orientation related to an exterior coordinate system) associated with one or more photos based on measurements of ground control points (GCPs). space resection is a nonlinear problem, existing methods involve linearization of the collinearity condition and the use of an iterative process to determine the final solution using the least-squares method. The process also requires initial approximate values of the unknown parameters, some of which must be estimated by another least-squares solution.
Lecture01: Introduction to Photogrammetry
This is an introduction to Photogrammetry. Lectures prepared for Duhok University's students, surveyign Department.
What's hot (20)
Photogrammetry Surveying, its Benefits & Drawbacks
Photogrammetry Surveying, its Benefits & Drawbacks
Photogrammetry - Space Resection by Collinearity Equations
Photogrammetry - Space Resection by Collinearity Equations
More from Ahmed Nassar
Notes on MATLAB - Basic Cheatsheet
MATLAB NOTES
To create a matrix that has multiple rows, separate the rows with
semicolons.
>> a = [1 2 3; 4 5 6; 7 8 10]
a =
1 2
4 5
3
6
7 8 10
Another way to create a matrix is to use a function, such as ones, zeros,
or rand. For example, create a 5-by-1 column vector of zeros.
>> z = zeros(5,1)
z =
0
0
0
0
0
>> z = ones(5,2)
z =
1 1
1 1
1 1
1 1
1 1
>> z = rand(5,3)
z =
0.8147 0.0975 0.1576
0.9058 0.2785 0.9706
0.1270 0.5469 0.9572
0.9134 0.9575 0.4854
0.6324 0.9649 0.8003
To transpose a matrix, use a single quote ('):
>> a'
ans =
1 4 7
2 5 8
3 6 10
>> a + 10
4
ans =
11 12 13
14 15 16
17 18 20
To perform element-wise multiplication rather than matrix
multiplication, use the .* operator:
>> p = a.*a
p =
1 4 9
16 25 36
49 64 100
To perform Natural Matrix multiplication, use the * operator:
>> a * a
ans =
30 36 45
66 81 102
109 134 169
MATLAB NOTES
Concatenation
>> A = [a,a]
A =
1 2 3 1 2 3
4 5 6 4 5 6
7 8 10 7 8 10
>> A = [a; a]
A =
1 2 3
4 5 6
7 8 10
1 2 3
4 5 6
7 8 10
When you want to access selected elements of an array, use indexing.
>> a(2,2)
ans =
5
5
MATLAB NOTES
use a single subscript that traverses down each column in order:
>> a(6)
ans =
8
The colon operator also allows you to create an equally spaced vector
of values using the form start:step:end.
>> b = 0:20:200
b =
0 20 40 60 80 100 120 140 160 180 200
sqrt(X) is the square root of the elements of X. Complex results are
produced if X is not positive.
>> sqrt((-2:2)')
Hydrographic Surveying : Safe Navigation
SAFE NAVIGATION ON THE NILE RIVER TEAM (6) MEMBERS AHMED YASSER AHMED MOHAMED NASSAR HOSSAM HASSAN RAMADAN HASSAN AHMED FAYEZ MOHAMED AHMED AHMED MOHAMED MESBAH ELSAYED AHMED ABDEL-RAHMAN GALAL ABSTRACT Millions of tons of cargo is transported over the Nile River yearly. Hundreds of Nile Cruises (Floating Hotels)operating between Luxor and Aswan. the Egyptian government gives a high priority to the improvement of safety of navigation on the Nile River. Cargo Ship Nile Cruise INTRODUCTION Transport on Nile River is for: Goods and Materials Tourists and Passengers INTRODUCTION SAFE VISUAL NAVIGATION implementation of hydrographic survey. cost effective solar-powered visual aids to navigation. Together with further development of infrastructure works along the Nile River. vessel tracking system for Nile cruise ships for lock passage planning and emergency cases. PROBLEMS OF Long duration of transport due to daylight navigation only NAVIGATION LOW FLOW OF CARGO REASONS: Unreliability of the river; no technical means for safe navigation in the navigable channel. Poor quality of services Unreliable delivery times due to grounding or technical failures of the barges. Poor quality of barges. AIM Is to define and design the main steps that should be followed now and, in the future, to achieve safe visual navigation on the Nile River. Considering (IHO) standards for hydrographic survey. HYDROGRAPHIC DATA ACQUISITION Data ACQUISITION Water level records Data Collection Vertical Position Horizontal Position Data Logging Data Processing Shoreline Survey Ortho-photos-Coordinates of First Order Points DATA ACQUISITION WATER LEVEL RECORDS Ministry of Public Works and Water Resources maintains a series of Staff Gauges along the Nile River from Aswan to the Mediterranean Sea. . The MPWWR can provide the water level reading daily. Overall, station readings are sufficient for the need of hydrographic survey. DATA ACQUISITION WATER LEVEL RECORDS Tide Guage DATA ACQUISITION VERTICAL (DEPTH) POSITION The flow depth is recorded referring to the bed level. The output data in form of chart . The output depth in the form of digital data is logged into data logger. DATA ACQUISITION HORIZONTAL POSITION boats are equipped with GPS antenna and controller. A reference installed GPS station is over a defined controlling point. Momentarily, The corrected horizontal position is logged into data logger to be integrated with vertical position. DATA ACQUISITION DATA LOGGING Data from DGPS system and digital depths from Echo sounder are logged in an ISAH data logging system (Integrated System for Hydrography). Automated DATA PROCESSING Sounding and position data are saved then processed workstation. then depths and positions are plotted on the screen and erroneous data are rejected. To produce navigation charts, depths were set to the chart datum .
DETERMINATION OF THE EARTH’S RADIUS, MASS, AND GRAVITIONAL CONSTANT - PHYSIC...
DETERMINATION OF THE EARTH’S RADIUS
In 200 B.C., the size of the Earth was calculated to within 1% accuracy! Eratosthenes used Aristotle's idea that, if the Earth was round, distant stars in the night sky would appear at different positions to observers at different latitudes. Eratosthenes knew that on the first day of summer, the Sun passed directly overhead at Syene, Egypt. At midday of the same day, he measured the angular displacement of the Sun from overhead at the city of Alexandria - 5000 stadia away from Syene. He found that the angular displacement was 7.2 degrees - there are 360 degrees in a circle, making 7.2 degrees equivalent to 1/50 of a circle. Geometry tells us that the ratio of 1/50 is the same as the ratio of the distance between Syene and Alexandria to the total circumference of the Earth. Thus, the circumference can be estimated by multiplying the distance between the two cities, 5000 stadia, by 50, equaling 250,000 stadia.
C equals circumference (5000 times 50 or 250,000)
the unit of the "stadium" was about 0.15 km. This means that Eratosthenes estimated the circumference of the Earth to about 40,000 km. He also knew that the circumference of a circle was equal to 2 times π (3.1415...) times the radius of the circle. (C = 2πr) With this information, Eratosthenes inferred that the Earth's radius was 6366 km. Both values are very close to the accepted modern values for the Earth's circumference and radius, 40,070 km, and 6378 km respectively, which have since been measured by orbiting spacecraft.
The diameter of a circle is twice the radius, giving us a diameter for Earth of 12,756 km.
Note: Eratosthenes was measuring the polar radius, and his value (using the 0.15 km/stadium conversion) lies between the polar and equatorial values.
DETERMINATION OF THE GRAVITIONAL CONSTANT
Isaac Newton expressed the Universal Gravitation Equation in 1687:
where
F is the force of attraction between objects
G is the Universal Gravitational Constant
M is the mass of the larger object
m is the mass of the smaller object
R is the separation between the centers of mass of the object
After that, there really wasn't much interest in G. Most scientists simply considered it a proportionality constant. they were more interested in gravity than gravitation.
In 1798, Henry Cavendish made an experiment to determine the Earth’s density. He used a torsion balance to measure the force of attraction between the two masses.
The Cavendish experiment uses a torsion equilibrium to measure the weak gravitational force between lead balls. A torsion equilibrium consists of a bar suspended at its middle by a thin wire. Twisting the wire requires a torque.
The way it works is that the gravitational force attracting the balls together turns the bar, overcoming torque resistance from the wire. That resistance is a function of angle turned and the torsion coefficient of the wire.
Remote Sensing - Operating Satellites
REMOTE SENSING
OPERATING SATELLITES
Landsat 7
Landsat 8
Spot 6
Spot 7
Worldview-2
Worldview-3
GEOEYE-1
ASTER
Sentinel-2A
Pleiades Neo 4
ZY-3
GF-5
GF-6
EgyptSat A
Lifetime span
(Lunch time)
Orbit Altitude
Spatial resolution
Swath width
Spectral Bands
Sensors
Band
Revisit Frequency
Applications
Hydrographic Surveying - Depth Sounding Equipment
Hydrographic Surveying - LECTURE 4: DEPTH SOUNDING EQUIPMENT
Hydrographic Surveying - Geodetic Control And Tidal Effects
Hydrographic Surveying
LECTURE 5: GEODETIC CONTROL AND TIDAL EFFECTS
Hydrographic Surveying - Basic Measurements And Equipments
HYDROGRAPHIC SURVEYING
LECTURE 2:
BASIC MEASUREMENTS AND EQUIPMENTS
حقوق الانسان في مصر الفرعونية
حقوق الانسان هي المعايير التي تنسق تعامل الناس كجزء من المجتمع وتحكم أساليب معيشتهم وتحفظ لهم كرامتهم وتعمل على تطوير حياتهم ونموها وهي أساس السلام والعدل والحرية. أيضا هي ملك للكل وليست حكر على أحد. فهي حق متساوي وغير قابل للتجزئة. فبدونها لا نستطيع العيش كبشر.
من الصعب تحديد فكرة الحقيقة والعدالة لدي قدماء المصريين، فلم تكن قوانينهم مكتوبة بل كانت قائمة على الممارسة اليومية، بالإضافة لاختلاف مفهوم العدالة عما تعنيه في عالمنا اليوم. كانت الحضارة المصرية القديمة أولي الحضارات التي جسدت فكر حماية حقوق الانسان، فكان المصريون القدماء اول من اعترفوا بحق الانسان في الحياة. ولكي ندرك ونتعمق في مفهوم حقوق الانسان في مصر القديمة، فمفهوم الماعت هو البداية التي سنحاول التعمق منها.
The Importance of Railway in Transportation
This research article mainly talks about railways. An account of the long history of centuries-old railways will be mentioned. Hence the vital importance of the railways and its role in all fields. Then the types of railway elements (rail, sleepers, and ballast). Then we will look at the advantages and disadvantages of each. Finally, the design of rail with all needed geometric equations.
In the Middle Ages, people traveled on foot or horseback, and other forms of transport were intended for goods. It is impossible to imagine the revolution that took place in industry and population expansion without the modern means of transportation for passengers and goods. So, the development of railways to coincide with industrial progress was a major challenge. In ancient civilizations in Egypt, Greece…etc, transportation of transporting goods and people by carts (drawn by bulls or horses), and they built predetermined methods to reduce animal energy consumption during transport, paved flat roads and prevented animals from walking on unpaved terrain Because this consumes much energy, this was the first transportation lines in the world.
Geometric Design of Roads and Highways
The Geometrical design of the highways deals with the nature of the visible dimensions and the setting of the visible features of the highway. The focus of geometric design is to meet the requirements of the driver and the vehicle such as safety, comfort, efficiency, smooth-flowing, and crash-free facility…etc. The features generally considered are elements of cross-section, sight distance, horizontal and vertical alignments, gradients, intersections, bicycle, and pedestrian lanes. The design of these features depends greatly on driver behavior, the characteristics of the vehicle, and traffic characteristics such as speed and size. The right geometric design will help reduce the severity of accidents. Hence, the goal of the geometric design is to ensure and provide optimum efficiency in the operation of traffic and maximum safety at an economic cost. We mean here to reduce costs and improve the quality and function of the highway.
The Function of Electric Power Systems
circuit breaker, conductors, distribution, electric power system, electrical, electromechanical, engineering, feeders, generators, insulators, lightning arresters, non-renewable energy, renewable energy, substation, substations, transformers
1. ABSTRACT
This Research Article speaks about electrical power systems which consist of three main phases: generation, transmission, and distribution. generators produce electricity from power sources at power plants. then power is delivered to customers through transmissions which stepping power up or down According to the distance that the energy travels. then power moves through distribution lines that carry electricity to homes and businesses.
2. INTRODUCTION
Typically, electricity is provided to homes and industries as AC. The electrons do not travel overhead along the power lines but vibrate in these lines 60 times per second. The electricity outlet plugs in your home does not produce electrons, but energy. If an appliance is attached, the outlet plugs provide the power for electrons to be moved around a closed circuit which is already in the wire. The energy is supplied as voltage to your home via a large, very complex distribution network. The energy is generated in a power plant and transmitted to the consumer via a network of power lines. In several steps, this is done. With a power voltage of several thousand volts, electricity leaves the power station at very high levels. The voltage is increased to several hundreds of thousand volts due to the loss of energy on high voltages at the overhead power lines. The voltage is decreased again to several thousand volts before power is distributed to industrial users. The voltage is decreased to 110 volts for home use. A transformer is used every time the voltage is down. Transformers are devices that only work with alternating current flows to either increase or decrease voltages.
Electric power systems (Figure 1) are real-time energy supply systems. Real-time means that power is generated, transported, transmitted, and distributed now of consumption. Electric power systems do not store electricity for the time of need as water and gas systems. Instead, generators produce the energy needed by demand It transforms other sources of energy (Such as wind, mechanical, solar, chemical, hydraulic, heat, geothermal, nuclear …etc.) into electrical power. Six main components of the power system are the power stations, transformer, transmission line, substations, distribution lines, distribution transformers. Also, there are many other devices connected to the network such as circuit breakers, conductors, etc. The system starts with a power plant generator where electrical energy is produced. Then power station transformers transformed to high-voltage electrical energy that is more suitable for efficient far distances transportation. High-voltage power lines in the electric power transmission system efficiently transport electricity over long distances to the
Types of Gears
Gearsare a type of mechanical element, the surface with the same space. It is toothed members used for the turning and transmitting of power and/or motion by meshing a pair of elements with no-slip from the driving shaft to the driven shaft. Therefore, gear drives are called positive drives. The smaller one is called pinion in any pair of gears and the larger one is called the immaterial gear that drives the other. The smaller gear is called pinion in any pair of gears and the larger one is called the immaterial gear that drives the other. If the pinion is the driver, the speed is decreased and the torque increases. If the pinion (the smaller one) is the driver, the speed is decreased and the torque increases, vice versa. The gears may be classified according to their shape into spiral, cycloid, and trochoid gears. Depending on the direction of the shaft, it can be categorized as Parallel, non-parallel, transverse, and non-transverse shaft gear.
Geodesy - Definition, Types, Uses and Applications
literature review speaks about the geodesy and its relation to the figure of the earth. The definition of geodesy and the imagining of the earth's shape evolution throughout history, it passed at many important developments. We will discuss that geodesy almost interferes with all Geo- and Space sciences, by clarifying some of its uses and applications.
Geology - rocks | جيولوجيا - الصخور
تُعرف الصخور بأنّها تشكيلات طبيعيّة صلبة تتكوّن من معدن واحد أو أكثر، وهي جزء أساسيّ في تركيب القشرة الأرضيّة. تُقسَم الصّخور تبعاَ لطريقة تكونّها إلى ثلاثة أنواع رئيسيّة، وهي: الصّخور النّاريّة، والصّخور المُتحوّلة، والصّخور الرّسوبيّة، ولكل نوع من الصّخور خصائص فريدة يمكن من خلالها تمييزه عن النَّوعَين الآخَرين.
Geology - earthquakes | جيولوجيا - الزلازل
تعرّف الزلازل على أنّها اهتزاز مفاجئ للأرض، ينتج عن مرور الموجات الزلزاليّة خلال صخور الأرض، بسبب الطاقة المخزّنة في القشرة، فتضغط كتل الصخور على بعضها البعض بشكل كبير ممّا يتسبّب في انزلاقها، لذلك تحدث الزلازل في أغلب الأحيان بسبب عوامل جيولوجية، أو بسبب مناطق ضيقة تتحرّك فيها كتل الصخور.
Geodetic Astronomy - MOTION IN THE HEAVENS - EARTH, SUN AND STARS
Geodetic Astronomy
MOTION IN THE HEAVENS
EARTH, SUN AND STARS
Motion of Earth
Earth’s Rotation
Earth’s Revolution
Motion of Sun
Equinoxes
Solstices
Motion of Stars
Proper Motion
Transverse Velocity
Radial Velocity
PHOTOGRAMMETRY: GROUND CONTROL FOR AERIAL PHOTOGRAMMETRY نقاط الضبط الأرضي في...
GROUND CONTROL FOR AERIAL PHOTOGRAMMETRY
نقاط الضبط الأرضي في أعمال التصوير الجوي
الضبط الأرضي يتكون من أي نقاط موقعها معروف في نظام احداثي مرجعي (object space) حيث من الممكن ان تتعرف الصورة إيجابيا في الصور الفوتوغرافية.
او هي نقاط يتم اختيارها كمرجع من سطح الأرض بمعلومية موقعها الأفقي والرأسي معاً او فرادي، ويتم تحديدها عن طريق أدوات المساحة التقليدية او المتقدمة.
TOTAL STATION: THEORY, USES AND APPLICATIONS.
TOTAL STATION: THEORY, USES AND APPLICATIONS.
The total station, (also known as electronic tacheometer) is an instrument that can measure horizontal and vertical angles together with slope distance and can be considered as combined EDM plus electronic theodolite. In common with other electronic surveying equipment, total stations are operated using a multi-function keyboard which is connected to a microprocessor built into the instrument. The microprocessor not only controls both the angle and distance measuring systems but is also used as a small computer that can calculate slope corrections, vertical components, rectangular coordinates and, in some cases, can also store observations directly using an internal memory. Nowadays surveying systems are available which can be use in an integrated manner with Global Positioning System (GPS). so, future total stations may have integrated GPS receivers as part of the measurement unit.
(Research Project) Satellites : Applications in Topography
(Research Project) Satellites : Applications in Topography
Faculty of Engineering at Shoubra
Surveying and Geomatics Department
INTRODUCTION
CONSTRUCTION OF GEODETIC SATELLITE
Working Principle
Types
Applications
Technology & Future Perspectives
More from Ahmed Nassar (20)
DETERMINATION OF THE EARTH’S RADIUS, MASS, AND GRAVITIONAL CONSTANT - PHYSIC...
DETERMINATION OF THE EARTH’S RADIUS, MASS, AND GRAVITIONAL CONSTANT - PHYSIC...
Hydrographic Surveying - Geodetic Control And Tidal Effects
Hydrographic Surveying - Geodetic Control And Tidal Effects
Hydrographic Surveying - Basic Measurements And Equipments
Hydrographic Surveying - Basic Measurements And Equipments
Geodesy - Definition, Types, Uses and Applications
Geodesy - Definition, Types, Uses and Applications
Geodetic Astronomy - MOTION IN THE HEAVENS - EARTH, SUN AND STARS
Geodetic Astronomy - MOTION IN THE HEAVENS - EARTH, SUN AND STARS
PHOTOGRAMMETRY: GROUND CONTROL FOR AERIAL PHOTOGRAMMETRY نقاط الضبط الأرضي في...
PHOTOGRAMMETRY: GROUND CONTROL FOR AERIAL PHOTOGRAMMETRY نقاط الضبط الأرضي في...
(Research Project) Satellites : Applications in Topography
(Research Project) Satellites : Applications in Topography
Recently uploaded
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Water billing management system project report.pdf
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
TOP 10 B TECH COLLEGES IN JAIPUR 2024.pptx
Looking for the best engineering colleges in Jaipur for 2024?
Check out our list of the top 10 B.Tech colleges to help you make the right choice for your future career!
1) MNIT
2) MANIPAL UNIV
3) LNMIIT
4) NIMS UNIV
5) JECRC
6) VIVEKANANDA GLOBAL UNIV
7) BIT JAIPUR
8) APEX UNIV
9) AMITY UNIV.
10) JNU
TO KNOW MORE ABOUT COLLEGES, FEES AND PLACEMENT, WATCH THE FULL VIDEO GIVEN BELOW ON "TOP 10 B TECH COLLEGES IN JAIPUR"
https://www.youtube.com/watch?v=vSNje0MBh7g
VISIT CAREER MANTRA PORTAL TO KNOW MORE ABOUT COLLEGES/UNIVERSITITES in Jaipur:
https://careermantra.net/colleges/3378/Jaipur/b-tech
Get all the information you need to plan your next steps in your medical career with Career Mantra!
https://careermantra.net/
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
Governing Equations for Fundamental Aerodynamics
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
一比一原版(UofT毕业证)多伦多大学毕业证成绩单如何办理
UofT毕业证原版定制【微信：176555708】【多伦多大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
Ppt on evs amity University project work.........................??????!?!?!?!!?!!?!!?/?/?/?/?/?
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
学校原件一模一样【微信：741003700 】《(ANU毕业证书)澳洲国立大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Recently uploaded (20)
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Water billing management system project report.pdf
Water billing management system project report.pdf
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
Planning Of Procurement o different goods and services
Planning Of Procurement o different goods and services
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
Fundamentals of Electric Drives and its applications.pptx
Fundamentals of Electric Drives and its applications.pptx
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
Photogrammetry - Stereoscopic Parallax
- 1. Benha University Faculty of Engineering at Shoubra Surveying Department Photogrammetry 1B Page | 1 REPORT PARALLEX BY AHMED YASSER AHMED MOHAMED NASSAR SECTION: 1
- 2. Benha University Faculty of Engineering at Shoubra Surveying Department Photogrammetry 1B Page | 2 • • • • • •
- 3. Benha University Faculty of Engineering at Shoubra Surveying Department Photogrammetry 1B Page | 3 • • • • • •
- 4. Benha University Faculty of Engineering at Shoubra Surveying Department Photogrammetry 1B Page | 4 • 𝑥 𝑥′ • • 𝑂1𝑂2 𝑂1′𝑂2′ • 𝑃𝑏 = 𝐷 − 𝑑𝑏 • • • • • 𝑃𝑎 = 𝑋𝑎′ − 𝑋𝑎 = 𝐷 − (𝐾 − 𝑟𝑎) = (𝐷 − 𝐾) + 𝑟𝑎