Presentation on CEMENT
•Download as PPTX, PDF•
2 likes•993 views
Cement Cement is mixture of calcareous , silicious, argellacious and other substances. Cement is used as binding material in mortar , concrete etc.. MORTAR Mortar is a workable paste used to bind building blocks such as stones, bricks, and concrete masonry units together, fill and seal the irregular gaps between them, and sometimes add decorative colors or patterns in masonry walls. TYPES OF CEMENT: OPC WHITE CEMENT MASANORY CEMENT OIL WELL CEMENT HIGH ALUMINA CEMENT PORTLAND POZZOLANA CEMENT(PPC)
Report
Share
Report
Share
Recommended
Cement
The document discusses the production of portland cement. It explains that the key raw materials needed are calcium, silica, alumina, and iron. The traditional production process involves grinding raw materials into powder and blending them, burning the mixture at high temperatures to form cement clinker, grinding the clinker with gypsum to produce portland cement. The main phases produced during clinkerization are alite, belite, aluminate, and ferrite, which contribute to the properties of the hardened cement.
Cement
Cement is produced through a process involving crushing, grinding, and burning of limestone and clay. Joseph Aspdin first produced Portland cement in 1824. The first cement factory in India was established in Tamil Nadu in 1904. Cement production involves quarrying raw materials, crushing them, mixing with water or dry process, grinding, burning at high temperatures to form clinker, cooling clinker, and final grinding with gypsum. Cement is used widely in construction activities like building, roads, bridges due to its binding properties and high compressive strength.
Cement .pptx
The document discusses different types of cement. It defines cement and describes its composition and manufacturing process. The main types discussed are ordinary Portland cement (OPC), Portland pozzolana cement (PPC), Portland blast furnace slag cement (PBSF), rapid hardening cement, low heat cement, sulfate resisting cement, and white cement. It provides details on the characteristics and common applications of each cement type.
Portland Cements, Calcium and Magnesium Compounds
This document provides an overview of Portland cements and related calcium and magnesium compounds. It discusses the history and development of Portland cement by Joseph Aspdin in 1824. It describes the manufacturing process which involves mining limestone and clay, grinding and heating the materials in a kiln to form clinker, and then grinding the clinker with gypsum to produce cement. Different types of Portland cement are outlined based on their properties and uses. Other cements like pozzolanic and high alumina cements are also discussed. Key calcium compounds like limestone, lime, and their uses are summarized. The manufacturing process for lime is outlined.
Type of cement
This document discusses types of cement. It begins by defining cement as a mixture used as a binding material. It then lists 15 common types of cement including ordinary Portland cement, rapid hardening cement, and white cement. The document focuses on ordinary Portland cement, describing its chemical composition and key constituents like lime, silica, alumina. It explains that lime provides strength, silica must be in sufficient quantity to form other compounds, and alumina supports quick setting. The role of other components like iron oxide, magnesia, and gypsum are also summarized.
Manufacture of cement - Classification and hydration
Introduction- Classification of cements - Portland Cement
Raw materials of Portland cement - Cement Manufacturing Process - Flow chart of Portland Cement manufacturing process - Cement Manufacturing Video - Mixing and Crushing
Dry Process - Wet Process - Burning Process - View of complete setup - Rotary Klin zones - Chemical Reactions -
Grinding and Packaging - Setting and hardening - Flow chart
Sequence - Chemical Reactions - Special Cement -
Cement- presentation
This document provides information about cement, including its history, definition, manufacture, and composition. It discusses the four main processes used to manufacture cement: wet, semi-wet, semi-dry, and dry. The wet and dry processes are described in more detail. It also summarizes the classification of cements as hydraulic or non-hydraulic, and provides examples of their applications. Finally, it outlines the key functions of cement and its main constituent materials like lime, silica, alumina, and others.
Cement
Cement is a binder used in construction that sets and binds other materials. The most important types are used to produce mortar and concrete. Cement is made up of calcium compounds that contribute strength over time through hydration. The main compounds are tricalcium aluminate, dicalcium silicate, and tricalcium silicate. Cement sets due to a chemical reaction with water. Common cement types include Portland cement and blended cements. Cement has many uses in construction and infrastructure. Proper storage, handling, and testing help ensure cement quality.
Recommended
Cement
The document discusses the production of portland cement. It explains that the key raw materials needed are calcium, silica, alumina, and iron. The traditional production process involves grinding raw materials into powder and blending them, burning the mixture at high temperatures to form cement clinker, grinding the clinker with gypsum to produce portland cement. The main phases produced during clinkerization are alite, belite, aluminate, and ferrite, which contribute to the properties of the hardened cement.
Cement
Cement is produced through a process involving crushing, grinding, and burning of limestone and clay. Joseph Aspdin first produced Portland cement in 1824. The first cement factory in India was established in Tamil Nadu in 1904. Cement production involves quarrying raw materials, crushing them, mixing with water or dry process, grinding, burning at high temperatures to form clinker, cooling clinker, and final grinding with gypsum. Cement is used widely in construction activities like building, roads, bridges due to its binding properties and high compressive strength.
Cement .pptx
The document discusses different types of cement. It defines cement and describes its composition and manufacturing process. The main types discussed are ordinary Portland cement (OPC), Portland pozzolana cement (PPC), Portland blast furnace slag cement (PBSF), rapid hardening cement, low heat cement, sulfate resisting cement, and white cement. It provides details on the characteristics and common applications of each cement type.
Portland Cements, Calcium and Magnesium Compounds
This document provides an overview of Portland cements and related calcium and magnesium compounds. It discusses the history and development of Portland cement by Joseph Aspdin in 1824. It describes the manufacturing process which involves mining limestone and clay, grinding and heating the materials in a kiln to form clinker, and then grinding the clinker with gypsum to produce cement. Different types of Portland cement are outlined based on their properties and uses. Other cements like pozzolanic and high alumina cements are also discussed. Key calcium compounds like limestone, lime, and their uses are summarized. The manufacturing process for lime is outlined.
Type of cement
This document discusses types of cement. It begins by defining cement as a mixture used as a binding material. It then lists 15 common types of cement including ordinary Portland cement, rapid hardening cement, and white cement. The document focuses on ordinary Portland cement, describing its chemical composition and key constituents like lime, silica, alumina. It explains that lime provides strength, silica must be in sufficient quantity to form other compounds, and alumina supports quick setting. The role of other components like iron oxide, magnesia, and gypsum are also summarized.
Manufacture of cement - Classification and hydration
Introduction- Classification of cements - Portland Cement
Raw materials of Portland cement - Cement Manufacturing Process - Flow chart of Portland Cement manufacturing process - Cement Manufacturing Video - Mixing and Crushing
Dry Process - Wet Process - Burning Process - View of complete setup - Rotary Klin zones - Chemical Reactions -
Grinding and Packaging - Setting and hardening - Flow chart
Sequence - Chemical Reactions - Special Cement -
Cement- presentation
This document provides information about cement, including its history, definition, manufacture, and composition. It discusses the four main processes used to manufacture cement: wet, semi-wet, semi-dry, and dry. The wet and dry processes are described in more detail. It also summarizes the classification of cements as hydraulic or non-hydraulic, and provides examples of their applications. Finally, it outlines the key functions of cement and its main constituent materials like lime, silica, alumina, and others.
Cement
Cement is a binder used in construction that sets and binds other materials. The most important types are used to produce mortar and concrete. Cement is made up of calcium compounds that contribute strength over time through hydration. The main compounds are tricalcium aluminate, dicalcium silicate, and tricalcium silicate. Cement sets due to a chemical reaction with water. Common cement types include Portland cement and blended cements. Cement has many uses in construction and infrastructure. Proper storage, handling, and testing help ensure cement quality.
Ordinary portland cement (opc) & Rapid hardening cement
This document discusses Ordinary Portland Cement and Rapid Hardening Cement. It defines cement and describes its main types. Ordinary Portland Cement (OPC) is the most widely used type and comprises calcium, silica, alumina, and iron. The production process involves crushing raw materials, mixing them, heating the mixture in a kiln to form clinker, grinding the clinker, and adding gypsum. OPC is used in construction where special properties are not required. Rapid Hardening Cement gains strength more quickly than OPC and is used when early strength or cold weather work is needed.
cement ppt
Cement is a binding material made of a mixture of calcareous, siliceous, and argillaceous substances. There are two main processes for manufacturing cement - the dry process and wet process. In the dry process, raw materials are ground without water, while in the wet process water is added during grinding. The ground raw materials are then burned in a kiln at high temperatures to form clinker, which is then ground with gypsum. There are different types of cement used for various purposes, and cement is tested for qualities like fineness, setting time, and compressive strength.
Cement, Cement manufacturing, Types of cement
Cement is a binding material used in construction that hardens when mixed with water. Portland cement is the most common type and consists of compounds that hydrate to form crystals or gel. It is made by grinding limestone and clay, blending them precisely, burning the mixture in a kiln at high temperatures, and grinding the resulting clinker with gypsum. When mixed with water or aggregate, cement sets and hardens due to chemical reactions between its compounds and water.
Cement
Gypsum and cement are important building materials. Gypsum naturally occurs as the mineral calcium sulfate dihydrate (CaSO4·2H2O) and is used to make plaster of Paris, Keene's plaster, and estrich plaster. When heated, gypsum undergoes dehydration and produces hemihydrate and anhydrite. Plaster of Paris is made from hemihydrate and sets quickly when mixed with water. Keene's plaster contains anhydrite and sets more slowly. Cement is produced by heating limestone and clay at high temperatures, resulting in compounds like dicalcium silicate that harden when mixed with water.
types and manufacturing of cement
Cement is topic;like and give credit for my free work
cement
cement and its types
Manufacturing of cement
uses of cement
wet process
dry process
portland cement
raw materials used in cement
field tests for cement
Types of cement
Gray Ordinary Portland Cement is the most commonly used type and is a high-quality, cost-effective building material composed mainly of clinker. White Portland Cement is produced with limestone, low iron kaolin clay, and gypsum for architectural works requiring brightness and artistic finishes. Masonry or mortar cement is mixed with finely ground limestone for uses like concrete blocks and brick work. Oil-well cement is a specially designed variety of hydraulic cement produced with gray Portland clinker for use in oil wells at high temperatures and pressures. Blended cements are produced by mixing Portland cement with materials like slag, fly ash, and lime to reduce CO2 emissions and offer more sustainable products.
1. cement ppt
Cement is a binding material made of calcareous, siliceous, and argillaceous substances. There are various types of cement used for different purposes, including ordinary Portland cement, rapid hardening cement, extra rapid hardening cement, sulphate resisting cement, quick setting cement, low heat cement, Portland pozzolana cement, Portland slag cement, high alumina cement, air entraining cement, supersulphated cement, masonry cement, expansive cement, colored cement, and white cement. The document discusses the chemical composition and functions of cement constituents and manufacturing processes.
Types of cement
This document discusses different types of cement. It begins with a brief history of cement, noting that Romans were early developers of hydraulic cement. It then categorizes and describes various cement types including natural cement, Portland cement, Portland limestone cement, blended cement, pozzolan lime cement, masonry cement, aluminous cement, and fly ash cement. It provides details on their compositions and typical uses. The document concludes with an overview of cement types commonly used in India.
CTEP - UNIT - II - CEMENT PRODUCTION
This document discusses the raw materials and production process for Portland cement. It provides details on:
1) The key raw materials needed are calcium, silica, alumina, and iron. Various natural sources can provide these materials, such as limestone, clay, and iron ore.
2) The traditional production process involves grinding the raw materials, burning the mixture at high temperatures to form cement clinker, then grinding the clinker with gypsum to produce Portland cement.
3) The chemical composition of Portland cement consists mainly of tricalcium silicate, dicalcium silicate, tricalcium aluminate, and tetracalcium aluminoferrite, with gypsum added. Each component contributes
Cement Industries
This presentation provides an overview of cement industries. It defines cement as a powdered material that hardens when mixed with water. There are four main types of cement: Portland, pozzolana, calcium aluminate, and special or corrosion resistant cement. The history, manufacturing process, raw materials, reactions, and uses of cement are described. Cement production involves mining limestone and clay, crushing and mixing them, burning the mixture in a kiln to form clinker, and grinding the clinker with gypsum. The main constituents of cement are lime, silica, alumina, and iron oxide. Cement is primarily used in construction applications such as buildings, roads, bridges, and more.
Cement
Cement is a binding agent that sets and hardens after mixing with water. Romans first developed hydraulic cement by mixing volcanic ash with lime. Portland cement, the most common type today, was invented in 1824 and consists of calcium silicates and other compounds. It is produced through a process of grinding raw materials like limestone and clay, heating the mixture in a kiln to form clinker, then grinding the clinker with gypsum. The clinker compounds hydrate and harden when mixed with water. Cement is primarily used to bind sand, gravel and water into concrete for construction applications.
cement
Cement is produced by heating limestone and clay in a kiln to form clinker, which is then ground with gypsum. There are two main types: hydraulic cement hardens when mixed with water due to a chemical reaction, while non-hydraulic cement hardens through carbonation. The Romans used early forms of concrete and cement in structures like the Colosseum. Modern cement production involves mining raw materials, grinding and heating them to form clinker, and then grinding the clinker to produce cement powder. Cement is used primarily in concrete and mortar for construction of buildings, roads, bridges and other infrastructure.
Cement
Detailed notes of cement(Building materials)
For more, go to our youtube channel - http://www.youtube.com/c/CivilEngineeringAdda
Cement
The document provides information about cement, including its history, chemical composition, manufacturing process, hydration, types of cement and tests conducted on cement. It begins with describing how cement is made from raw materials such as limestone, clay and iron ore through grinding, heating and cooling processes. It then discusses the chemistry and reactions involved in cement hydration. The document also lists and describes common types of cement used in construction, such as ordinary Portland cement, rapid hardening cement, white cement, as well as tests to measure cement consistency, setting time and strength.
Cement
Cement is produced by heating limestone and clay at high temperatures. This causes them to chemically combine and form small balls called clinker. Clinker is then ground with gypsum into a powder to create cement. When mixed with water, cement forms a paste that binds sand, gravel and crushed rock together to form concrete. The key steps in cement production are grinding raw materials, firing the mixture in a kiln at over 1300°C to produce clinker, cooling the clinker, and grinding it with gypsum into the final cement powder. Different types of cement are produced by varying the chemical composition and fineness to achieve specific properties like rapid setting, low heat generation, or sulfate resistance.
Cement manufacturing process new
Portland cement is produced through a four step process:
1) Limestone and other raw materials are quarried and crushed
2) The raw materials are ground and blended to ensure proper chemical composition
3) The raw materials are heated in a kiln to over 1400°C, undergoing chemical reactions to form the four main compounds that make up cement
4) The resulting clinker is ground with gypsum to produce the fine powder that is Portland cement
Cement
Popular as Building material.
Material with adhesive and cohesive properties.
To bind the fine and corse aggregate together.
Common variety of cement is known as the Portland cement.
India is the fifth largest producer of cement in the world.
Rajasthan is the second largest producer of cement in india after Andra Pradesh.
Cement
This document provides information on ordinary Portland cement grade 53, including its definition, history, manufacturing process, chemical and physical requirements, and uses. Key points:
- Cement is made from limestone, clay, and other materials that are heated to form clinker and then ground with gypsum.
- The manufacturing process involves quarrying raw materials, crushing, grinding, burning at high temperatures, cooling clinker, and grinding it with gypsum to form cement.
- Cement must meet chemical requirements for composition and physical requirements for things like setting time and strength.
- The main uses of cement are in concrete and mortar for construction of buildings, infrastructure, and more.
Cement
Cement is produced through a process involving mixing raw materials like limestone and clay, burning the mixture in a kiln at high temperatures, and finely grinding the resulting clinker. It is used as a binding agent in materials like mortar and concrete. The consistency test determines the appropriate water-cement ratio needed to produce a cement paste with normal consistency for standard strength tests. A Vicat apparatus is used to measure penetration of a needle into the paste, with a reading between 30-35mm below the surface considered standard consistency. There are various types of cement used for different purposes and properties.
Cement
The document discusses the manufacturing process of cement. It begins with crushing and mixing of raw materials such as limestone, clay, and iron ore. The raw materials are then heated in a kiln to form clinker. Clinker is ground into a fine powder to produce cement. When mixed with water, cement undergoes chemical reactions that result in hardening over time as it hydrates. The hydration process involves calcium silicates and aluminates reacting with water to form compounds like calcium silicate hydrate and calcium aluminate hydrates.
Fundamential & technical analysis of banking sector ppt
This document analyzes the banking sector in India. It aims to examine the risk and return characteristics of public sector banks versus private sector banks to determine which is a better investment. The analysis will be conducted using fundamental analysis techniques and will evaluate 3 public sector banks and 3 private sector banks. It will also compare customer satisfaction between public and private sector banks. The methodology will use both primary and secondary sources, including questionnaires, reports, books, newspapers, government reports and banks' annual reports. Major players in the industry will be analyzed using CAMELS ratios.
Training
This document provides details about the construction of a flyover from Jagdeo Path to Sheikhpura Mode in three sentences:
The flyover is being constructed using the segmental bridge technology and has a length of 2.75 km including ramps, with pile foundations, piers, and pre-stressed concrete segments used for the superstructure. Piles of 1200 mm diameter were installed up to depths of 36-40m using bored casting technique, and the concrete plant near Saguna More was used to produce the M40 and M55 concrete used for construction. The flyover aims to reduce traffic congestion in the area by providing additional connectivity from Jagdeo Path to Sheikhpura Mode.
More Related Content
What's hot
Ordinary portland cement (opc) & Rapid hardening cement
This document discusses Ordinary Portland Cement and Rapid Hardening Cement. It defines cement and describes its main types. Ordinary Portland Cement (OPC) is the most widely used type and comprises calcium, silica, alumina, and iron. The production process involves crushing raw materials, mixing them, heating the mixture in a kiln to form clinker, grinding the clinker, and adding gypsum. OPC is used in construction where special properties are not required. Rapid Hardening Cement gains strength more quickly than OPC and is used when early strength or cold weather work is needed.
cement ppt
Cement is a binding material made of a mixture of calcareous, siliceous, and argillaceous substances. There are two main processes for manufacturing cement - the dry process and wet process. In the dry process, raw materials are ground without water, while in the wet process water is added during grinding. The ground raw materials are then burned in a kiln at high temperatures to form clinker, which is then ground with gypsum. There are different types of cement used for various purposes, and cement is tested for qualities like fineness, setting time, and compressive strength.
Cement, Cement manufacturing, Types of cement
Cement is a binding material used in construction that hardens when mixed with water. Portland cement is the most common type and consists of compounds that hydrate to form crystals or gel. It is made by grinding limestone and clay, blending them precisely, burning the mixture in a kiln at high temperatures, and grinding the resulting clinker with gypsum. When mixed with water or aggregate, cement sets and hardens due to chemical reactions between its compounds and water.
Cement
Gypsum and cement are important building materials. Gypsum naturally occurs as the mineral calcium sulfate dihydrate (CaSO4·2H2O) and is used to make plaster of Paris, Keene's plaster, and estrich plaster. When heated, gypsum undergoes dehydration and produces hemihydrate and anhydrite. Plaster of Paris is made from hemihydrate and sets quickly when mixed with water. Keene's plaster contains anhydrite and sets more slowly. Cement is produced by heating limestone and clay at high temperatures, resulting in compounds like dicalcium silicate that harden when mixed with water.
types and manufacturing of cement
Cement is topic;like and give credit for my free work
cement
cement and its types
Manufacturing of cement
uses of cement
wet process
dry process
portland cement
raw materials used in cement
field tests for cement
Types of cement
Gray Ordinary Portland Cement is the most commonly used type and is a high-quality, cost-effective building material composed mainly of clinker. White Portland Cement is produced with limestone, low iron kaolin clay, and gypsum for architectural works requiring brightness and artistic finishes. Masonry or mortar cement is mixed with finely ground limestone for uses like concrete blocks and brick work. Oil-well cement is a specially designed variety of hydraulic cement produced with gray Portland clinker for use in oil wells at high temperatures and pressures. Blended cements are produced by mixing Portland cement with materials like slag, fly ash, and lime to reduce CO2 emissions and offer more sustainable products.
1. cement ppt
Cement is a binding material made of calcareous, siliceous, and argillaceous substances. There are various types of cement used for different purposes, including ordinary Portland cement, rapid hardening cement, extra rapid hardening cement, sulphate resisting cement, quick setting cement, low heat cement, Portland pozzolana cement, Portland slag cement, high alumina cement, air entraining cement, supersulphated cement, masonry cement, expansive cement, colored cement, and white cement. The document discusses the chemical composition and functions of cement constituents and manufacturing processes.
Types of cement
This document discusses different types of cement. It begins with a brief history of cement, noting that Romans were early developers of hydraulic cement. It then categorizes and describes various cement types including natural cement, Portland cement, Portland limestone cement, blended cement, pozzolan lime cement, masonry cement, aluminous cement, and fly ash cement. It provides details on their compositions and typical uses. The document concludes with an overview of cement types commonly used in India.
CTEP - UNIT - II - CEMENT PRODUCTION
This document discusses the raw materials and production process for Portland cement. It provides details on:
1) The key raw materials needed are calcium, silica, alumina, and iron. Various natural sources can provide these materials, such as limestone, clay, and iron ore.
2) The traditional production process involves grinding the raw materials, burning the mixture at high temperatures to form cement clinker, then grinding the clinker with gypsum to produce Portland cement.
3) The chemical composition of Portland cement consists mainly of tricalcium silicate, dicalcium silicate, tricalcium aluminate, and tetracalcium aluminoferrite, with gypsum added. Each component contributes
Cement Industries
This presentation provides an overview of cement industries. It defines cement as a powdered material that hardens when mixed with water. There are four main types of cement: Portland, pozzolana, calcium aluminate, and special or corrosion resistant cement. The history, manufacturing process, raw materials, reactions, and uses of cement are described. Cement production involves mining limestone and clay, crushing and mixing them, burning the mixture in a kiln to form clinker, and grinding the clinker with gypsum. The main constituents of cement are lime, silica, alumina, and iron oxide. Cement is primarily used in construction applications such as buildings, roads, bridges, and more.
Cement
Cement is a binding agent that sets and hardens after mixing with water. Romans first developed hydraulic cement by mixing volcanic ash with lime. Portland cement, the most common type today, was invented in 1824 and consists of calcium silicates and other compounds. It is produced through a process of grinding raw materials like limestone and clay, heating the mixture in a kiln to form clinker, then grinding the clinker with gypsum. The clinker compounds hydrate and harden when mixed with water. Cement is primarily used to bind sand, gravel and water into concrete for construction applications.
cement
Cement is produced by heating limestone and clay in a kiln to form clinker, which is then ground with gypsum. There are two main types: hydraulic cement hardens when mixed with water due to a chemical reaction, while non-hydraulic cement hardens through carbonation. The Romans used early forms of concrete and cement in structures like the Colosseum. Modern cement production involves mining raw materials, grinding and heating them to form clinker, and then grinding the clinker to produce cement powder. Cement is used primarily in concrete and mortar for construction of buildings, roads, bridges and other infrastructure.
Cement
Detailed notes of cement(Building materials)
For more, go to our youtube channel - http://www.youtube.com/c/CivilEngineeringAdda
Cement
The document provides information about cement, including its history, chemical composition, manufacturing process, hydration, types of cement and tests conducted on cement. It begins with describing how cement is made from raw materials such as limestone, clay and iron ore through grinding, heating and cooling processes. It then discusses the chemistry and reactions involved in cement hydration. The document also lists and describes common types of cement used in construction, such as ordinary Portland cement, rapid hardening cement, white cement, as well as tests to measure cement consistency, setting time and strength.
Cement
Cement is produced by heating limestone and clay at high temperatures. This causes them to chemically combine and form small balls called clinker. Clinker is then ground with gypsum into a powder to create cement. When mixed with water, cement forms a paste that binds sand, gravel and crushed rock together to form concrete. The key steps in cement production are grinding raw materials, firing the mixture in a kiln at over 1300°C to produce clinker, cooling the clinker, and grinding it with gypsum into the final cement powder. Different types of cement are produced by varying the chemical composition and fineness to achieve specific properties like rapid setting, low heat generation, or sulfate resistance.
Cement manufacturing process new
Portland cement is produced through a four step process:
1) Limestone and other raw materials are quarried and crushed
2) The raw materials are ground and blended to ensure proper chemical composition
3) The raw materials are heated in a kiln to over 1400°C, undergoing chemical reactions to form the four main compounds that make up cement
4) The resulting clinker is ground with gypsum to produce the fine powder that is Portland cement
Cement
Popular as Building material.
Material with adhesive and cohesive properties.
To bind the fine and corse aggregate together.
Common variety of cement is known as the Portland cement.
India is the fifth largest producer of cement in the world.
Rajasthan is the second largest producer of cement in india after Andra Pradesh.
Cement
This document provides information on ordinary Portland cement grade 53, including its definition, history, manufacturing process, chemical and physical requirements, and uses. Key points:
- Cement is made from limestone, clay, and other materials that are heated to form clinker and then ground with gypsum.
- The manufacturing process involves quarrying raw materials, crushing, grinding, burning at high temperatures, cooling clinker, and grinding it with gypsum to form cement.
- Cement must meet chemical requirements for composition and physical requirements for things like setting time and strength.
- The main uses of cement are in concrete and mortar for construction of buildings, infrastructure, and more.
Cement
Cement is produced through a process involving mixing raw materials like limestone and clay, burning the mixture in a kiln at high temperatures, and finely grinding the resulting clinker. It is used as a binding agent in materials like mortar and concrete. The consistency test determines the appropriate water-cement ratio needed to produce a cement paste with normal consistency for standard strength tests. A Vicat apparatus is used to measure penetration of a needle into the paste, with a reading between 30-35mm below the surface considered standard consistency. There are various types of cement used for different purposes and properties.
Cement
The document discusses the manufacturing process of cement. It begins with crushing and mixing of raw materials such as limestone, clay, and iron ore. The raw materials are then heated in a kiln to form clinker. Clinker is ground into a fine powder to produce cement. When mixed with water, cement undergoes chemical reactions that result in hardening over time as it hydrates. The hydration process involves calcium silicates and aluminates reacting with water to form compounds like calcium silicate hydrate and calcium aluminate hydrates.
What's hot (20)
Ordinary portland cement (opc) & Rapid hardening cement
Ordinary portland cement (opc) & Rapid hardening cement
Viewers also liked
Fundamential & technical analysis of banking sector ppt
This document analyzes the banking sector in India. It aims to examine the risk and return characteristics of public sector banks versus private sector banks to determine which is a better investment. The analysis will be conducted using fundamental analysis techniques and will evaluate 3 public sector banks and 3 private sector banks. It will also compare customer satisfaction between public and private sector banks. The methodology will use both primary and secondary sources, including questionnaires, reports, books, newspapers, government reports and banks' annual reports. Major players in the industry will be analyzed using CAMELS ratios.
Training
This document provides details about the construction of a flyover from Jagdeo Path to Sheikhpura Mode in three sentences:
The flyover is being constructed using the segmental bridge technology and has a length of 2.75 km including ramps, with pile foundations, piers, and pre-stressed concrete segments used for the superstructure. Piles of 1200 mm diameter were installed up to depths of 36-40m using bored casting technique, and the concrete plant near Saguna More was used to produce the M40 and M55 concrete used for construction. The flyover aims to reduce traffic congestion in the area by providing additional connectivity from Jagdeo Path to Sheikhpura Mode.
The lalit mumbai
The Lalit Mumbai is a 5-star luxury hotel located close to the city center of Mumbai and the international airport, providing easy access. It has impressive facilities like a large swimming pool, spa, and spacious conference hall equipped with state-of-the-art amenities. The hotel also has an in-house 24/7 restaurant with views of the pool serving a variety of global cuisines, as well as a see-through drinks cellar, live counters, and comfortable lounge area, offering guests relaxing dining experiences.
flyover internship 2
The document summarizes the construction of a flyover project in Patna, Bihar, India. It discusses the various stages of the project, including topographic and traffic surveys, geotechnical analysis, planning and design, and construction. The construction involves building the substructure with pile foundations and pile caps, and the superstructure, which consists of piers and precast concrete deck segments connected by post-tensioning. Once completed, the flyover will help reduce traffic congestion in the city.
Edelweiss financial services
This document provides information about a project report submitted by Kumar Prashirsh for their Post Graduate Diploma in Management. It includes a bona fide certificate signed by the principal director and project guide, acknowledging the report. It also includes an acknowledgements section thanking various mentors and faculty for their guidance and support during the project. The report then provides background information on the history and growth of the cement industry in India as well as details on Ambuja Cements, one of the leading cement manufacturers in the country.
INDUSTRIAL TRAINING OF FLYOVER CONSTRUCTION
The Public Works Department has a long history of infrastructure development in the state. It is responsible for constructing and maintaining roads, bridges, and government buildings. Originally, irrigation and public health engineering were also part of the PWD. Since its inception, the department has strived for excellence through continuous improvement and engineering milestones.
Flyover bridge
this presentation contains definition,types,components,advantages and drawbacks of flyover.....thank you
cement road construction in the rural areas
this ppt is seminar on hindustan college of science & technology farah mathura in 2013. in ppt shows the work procedure of construction of road.
Flyover construction
This power point is flyover construction .All the picture are real and all the definition are taken in standard book and google.
CONSTRUCTION OF CEMENT CONCRETE ROAD
The document provides an overview of public works departments and concrete road construction in India. It discusses that the Public Works Department in Uttar Pradesh pioneered construction and established agencies like the State Bridge Corporation. It also describes the types of pavements used in India, including flexible pavements made of bitumen and rigid concrete pavements. The document outlines the basic process of constructing concrete roads, from site preparation to mixing, placing, and curing concrete before opening the road to traffic.
Viewers also liked (10)
Fundamential & technical analysis of banking sector ppt
Fundamential & technical analysis of banking sector ppt
Similar to Presentation on CEMENT
Cement and cement grades
Cement is a powder that hardens when mixed with water and aggregates. There are various types of cement including ordinary Portland cement (OPC), Portland pozzolana cement (PPC), and others. OPC is widely used but produces more heat during curing, while PPC contains fly ash which makes it more environmentally friendly and reduces costs. The appropriate cement type depends on factors like required strength, heat generation, setting time, and permeability.
cement, bricks and their types.
Cement and bricks are important construction materials. There are many types of cement including ordinary Portland cement, Portland pozzolana cement, rapid hardening cement, and others that vary in chemical composition and properties. Bricks can be made from burnt clay, sand lime, concrete, fly ash clay, or firebrick raw materials. Each brick type has different advantages depending on factors like strength, weight, color, and fire resistance that suit different applications in construction.
Construction material in civil engineering
Element Of Civil Engineering subject as per GTU syllabus 1st sem carry out all content. also usefull for general idea about civil branch.
Construction material
This document discusses various building materials used in construction. It describes natural materials like stone, brick, lime and artificial materials like cement and aggregates. It provides classifications and properties of each material. Stone, brick, lime, cement and aggregates are used along with mortar in masonry works, concrete works, plastering and other construction activities of buildings.
Building Materials.pptx
This power point presentation will able know the building materials like cement, lime, pozzolan and timber that are used in the construction of various types of building and their properties and significance in the selection and requirements of concerned material which are required in the construction. And it should be used after testing as per IS specifications and there by quality and economical in case of life span of buildings is to be specified in advance.
MD MAHFUJUR RAHMAN RAJ.pptx
This document provides information about common building materials used in construction. It discusses bricks, cement, sand, and coarse aggregate. For bricks, it describes the standard sizes of common bricks and categories bricks by their raw materials, including burnt clay, sand lime, engineering, fly ash, and concrete bricks. It then discusses cement and describes the raw materials and manufacturing process used to make cement. It defines sand and describes different types and classifications of sand. Finally, it defines coarse aggregate, describes its effects on concrete properties, and classifications of coarse aggregate including size ranges commonly used in concrete.
Building materials cement
The presentation is descriptive about the basics of cement and cement industry in india and abroad. this was our project in 1st year of B.arch from school of planning and architecture, bhopal, india.
ADVANCED CONCRETE TECHNOLOGY (CE361)
Aggregates: Review of types; sampling and testing; effects on properties of concrete, production of artificial aggregates.
Cements: Review of types of cements, chemical composition; properties and tests, chemical and physical process of hydration,Blended cements.Properties of fresh concrete - basics regarding fresh concrete –
mixing, workability, placement, consolidation, and curing,
segregation and bleeding
Chemical Admixtures: types and classification; actions and
interactions; usage; effects on properties of concrete
Mineral Admixtures: Flyash, ground granulated blast furnace slag,
metakaolin, rice-husk ash and
silica fume; chemical composition; physical characteristics; effects
on properties of concrete; advantages and disadvantages.
Proportioning of concrete mixtures: Factors considered in the design of mix . BIS Method, ACI method.,Properties of hardened concrete: Strength- compressive tensile
and flexure - Elastic properties - Modulus of elasticity - Creep-
factors affecting creep, effect of creep - shrinkage- factors affecting
shrinkage, plastic shrinkage, drying shrinkage, autogeneous
shrinkage, carbonation shrinkage ,Durability of concrete: Durability concept; factors affecting,
reinforcement corrosion; fire resistance; frost damage; sulfate
attack; alkali silica reaction; concrete in sea water, statistical quality
control, acceptance criteria as per BIS code.
Non-destructive testing of concrete: Surface Hardness, Ultrasonic,
Penetration resistance, Pull-out test, chemical testing for chloride
and carbonation- core cutting - measuring reinforcement cover
Special concretes - Lightweight concrete- description of various
types -High strength concrete - Self compacting concrete -Roller
compacted concrete – Ready mixed concrete – Fibre reinforced
concrete - polymer concrete
Special processes and technology for particular types of
structure - Sprayed concrete; underwater concrete, mass concrete;
slip form construction, Prefabrication technology
cement - uses, types and manufacturing process.pptx
Cement is a mixture of calcareous, siliceous, argillaceous and other substances that is used as a binding material. There are natural and artificial cements. Natural cement involves burning and crushing limestone and lime, while artificial cement involves burning materials at a high temperature and adding gypsum. The composition of cement includes lime, silica, alumina and iron oxide, with the proportions of each ingredient affecting the strength and properties. There are various types of cement used for different purposes, such as ordinary Portland cement, rapid hardening cement, and sulfate resisting cement. Cement is used for construction activities like preparing mortar and concrete, and for building fireproof, chemical resistant and water retaining structures.
cementing raw materials plaster gypsum cement.pptx
This document discusses raw materials used in cement manufacturing. The main raw materials are limestone, clay or shale, and gypsum. Limestone provides calcium oxide, an important ingredient that contributes to cement strength. Clay and shale supply silica, alumina, and iron oxide. Gypsum controls the setting time of cement. Other materials sometimes used include fly ash, silica fume, iron ore, bauxite, and mill scale. The exact composition depends on the type of cement being produced.
Advanced Material for Construction
This document summarizes a seminar on advanced materials for construction. It discusses common building stones like basalt and granite used in foundations. It describes the composition and types of bricks, including acid resistant and engineering bricks. It outlines the types of cement like Portland and types of tiles like ceramic and concrete used in construction. It discusses the advantages of glass cladding for buildings in providing beauty, insulation, and energy efficiency. The seminar provided an overview of important construction materials.
Construction materials.pptx
This document provides information on various construction materials. It discusses river sand as a preferred fine aggregate and its characteristics. It also outlines the types, grades, and uses of cement, as well as reinforcement steel and structural steel shapes. Ready-mix concrete is defined as concrete produced in a batch plant according to a mix design and delivered via transit mixers. Various concrete mix designs and ready-mix concrete types are also summarized.
Report on Types of Cement_TusharDas_SEM5.pdf
This document discusses different types of cement and their properties. It outlines 10 main types of cement:
1. Ordinary Portland Cement (OPC) is the most widely used type for concrete, mortar, and plaster construction.
2. Portland Pozzolana Cement (PPC) has high chemical resistance and is used in marine structures, bridges, and mass concrete works.
3. Rapid and extra rapid hardening cements gain strength faster, used for quick construction projects.
4. Low heat cement produces less heat during curing and is used in mass concrete like dams. Sulfate resisting cement is used where soils/water contain sulfates.
It also outlines physical
CTEP - UNIT - II - CEMENT
This document provides information about cement, including its composition, properties, functions, quality requirements, grades, and types. Cement is a binding material that is composed mainly of lime, silica, alumina, and iron oxide. It binds sand and gravel together to form concrete. The main functions of cement are to provide binding properties and strength to concrete. Common grades used in India are 33, 43 and 53, defined by their compressive strengths. There are various types of cement used for different purposes like rapid hardening, low heat, sulphate resisting, white/colored cement and others.
CH_6 Building Material.ppt
This document provides an overview of various construction materials used in civil engineering projects. It discusses naturally available materials like stone, brick, lime, cement and timber. It describes the composition, types, properties and uses of each material. For stone, brick and lime, it specifically outlines the requirements and specifications of different varieties. The document serves as a reference for civil engineers to understand the nature and behavior of various materials used in building and infrastructure development.
Pdf lect #_8_bricks
Bricks are one of the oldest manufactured building materials. They are made by molding clay into blocks and drying and burning them. Bricks have several advantages such as variety of color/shape/texture, durability, strength, and availability. They are lighter than stones.
There are various tests conducted on bricks to check qualities like water absorption, crushing strength, hardness, presence of soluble salts, size, shape, soundness, and structure. Bricks are used widely in structural construction as well as decoratively. Good bricks are uniform in size/shape with sharp edges, give a clear ringing sound, and absorb less than 20% water. Various types of bricks include burnt bricks classified by quality, and special types like
CH_6 Building Material.pptx
This document provides an overview of various construction materials used in civil engineering projects. It begins by discussing naturally available materials like stone, brick, lime, and timber. It then covers industrial materials like cement and metals. For each material, the document outlines the composition, requirements, types, properties and common uses. Stone is described in more detail, covering the different types of stone and their uses in hydraulic structures, retaining walls, and more. The document also provides a detailed breakdown of the production of bricks and their various classifications, as well as the properties and uses of lime, cement, and timber. It discusses the seasoning process for timber to reduce moisture content.
Various types of cement used in construction in India.pdf
Types Of Cement A powerful and long-lasting structure can be created with cement, a construction substance that hardens, sets, & adheres to other materials. The majority of its constituents are calcium silicates and other minor substances. In order to hydrate cement, it is mixed with water to create a paste, which eventually hardens and strengthens to form a solid structure.
Bricks
This document provides an introduction and overview of bricks, including their composition, types, properties, and uses. It discusses the main ingredients that make up clay bricks, such as alumina, silica, lime, and iron oxide. Bricks are classified based on their quality after burning, with first class bricks being the hardest and used for important structures. Other types discussed include hollow bricks, fly-ash bricks, refractory bricks, and perforated bricks. The properties of good burnt clay bricks are that they are uniformly burnt and hard with high compressive strength.
Fly-ash disposal and utilisation
This document discusses the reuse of fly ash from coal power plants. Fly ash is a byproduct of coal combustion that can be used in concrete production as a substitute for cement and sand, for construction fills and road bases, and in agriculture and soil amendments. Using fly ash in concrete reduces costs and improves strength, permeability, and durability. Fly ash bricks are also discussed as an alternative to clay bricks that is more environmentally friendly through waste reuse. Overall fly ash utilization provides environmental and economic benefits.
Similar to Presentation on CEMENT (20)
cement - uses, types and manufacturing process.pptx
cement - uses, types and manufacturing process.pptx
cementing raw materials plaster gypsum cement.pptx
cementing raw materials plaster gypsum cement.pptx
Various types of cement used in construction in India.pdf
Various types of cement used in construction in India.pdf
Recently uploaded
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Recently uploaded (20)
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
Presentation on CEMENT
- 1. PRESENTED TO MISS RIFFAT ZAHOOR PRESENTED BY DANISH AMAN SHAKEEL AHMED HUSSAIN MUSTAFA MUNEER AHMED AAMIR RASOOL B.E CIVIL ENGINEERING SEMESTER FALL 2014-15 1/23/2015
- 2. Cement is mixture of calcareous , silicious, argellacious and other substances. Cement is used as binding material in mortar , concrete etc..
- 3. Mortar is a workable paste used to bind building blocks such as stones, bricks, and concrete masonry units together, fill and seal the irregular gaps between them, and sometimes add decorative colors or patterns in masonry walls.
- 4. OPC WHITE CEMENT MASANORY CEMENT OIL WELL CEMENT HIGH ALUMINA CEMENT PORTLAND POZZOLANA CEMENT(PPC)
- 5. It is a normal type cement which is used for construction is done by OPC.
- 6. Opc has grey color, but white cement has pure white color. Strength of white cement lower than opc. White cement is used for filling gaps between tiles, and for decoration. Price of white cement higher than opc. It is also called snowcrete.
- 7. This cement is used to make joints in the brick work, block work and stone work.
- 8. This cement can resist very high temperature and high pressure. It is used in oil well to seal leakages.
- 9. Opc cement approximately 63% lime and 6% alumina. High alumina cement has 40% lime and 40% alumina. This cement can resist high temperature . It is used for internal linings of furnaces and kiln. It is also used for construction of dams and heavy structures.
- 10. Volcanic ash containing silicates of calcium, iron and aluminum when mixed with lime and heated produces this cement. Its grey in color like OPC. PPC is used in heavy load infrastructure and constructions such as marine structures, hydraulic structures, mass concreting works, plastering, masonry mortars, and all applications of ordinary Portland cement.
- 11. ADVANTAGES: Very Strong Can create large structures quickly Conforms to different shapes (arcs and circles, etc). DISADVANTAGES: Very heavy Expensive compared to other alternatives