This document discusses packaging materials and systems for various dairy products including liquid, concentrated, dried, frozen and fat-rich products. It describes common packaging materials like paperboard, polyethylene and aluminium foil used in cartons. It also discusses retort packaging processes and benefits. Different sections summarize packaging for specific dairy products like cream, butter, ghee, milk products and concentrated/dried products. Packaging formats, materials requirements and challenges are outlined for each dairy type. Potential health and environmental impacts of some packaging materials are also mentioned.
A retort pouch or retortable pouch is a type of food packaging made from a laminate of flexible plastic and metal foils. It allows the sterile packaging of a wide variety of food and drink handled by aseptic processing, and is used as an alternative to traditional industrial canning methods
Vacuum packaging is an effective way to increase the shelf life of food products. Here the product is placed in an air-tight pack, the air sucked out and the package sealed.
A retort pouch or retortable pouch is a type of food packaging made from a laminate of flexible plastic and metal foils. It allows the sterile packaging of a wide variety of food and drink handled by aseptic processing, and is used as an alternative to traditional industrial canning methods
Vacuum packaging is an effective way to increase the shelf life of food products. Here the product is placed in an air-tight pack, the air sucked out and the package sealed.
Controlled atmospheric and Modified atmospheric packaging using nitrogenDebomitra Dey
CAP and MAP (Controlled atmospheric packaging and Modified atmospheric packaging) of food products using Nitrogen gas. Food products that are durable and perishable, how Nitrogen gas protects foods from spoilage.
Packaging materials: Paper based packaging for foodDr. Jilen Mayani
Paper is a very versatile material. It is produced from cellulosic, naturally renewable fibres. It is therefore considered as an environmentally friendly material, being easily recycled, composted or incinerated after use. It may be used in food packaging applications within a wide range of grammages, being designed as wrapping paper, folding box board or corrugated board, for direct or indirect contact, i.e. as primary, secondary or tertiary packaging. Other paper grades, such as tissue paper, may be used in occasional contact with foodstuffs.
When paper and paper based products are intended, or likely, to come into contact with food, manufacturers follow relevant and acknowledged regulations and guidelines to design manufacturing processes and recipes, and ensure consumer safety.
This presentation gives an overview of edible packaging and various films and coatings used. It also deals with various fruits and vegetable which can be coated to extend the shelf life. It also deals with the companies manufacturing these kind of innovative packages and their future scope.
Controlled atmospheric and Modified atmospheric packaging using nitrogenDebomitra Dey
CAP and MAP (Controlled atmospheric packaging and Modified atmospheric packaging) of food products using Nitrogen gas. Food products that are durable and perishable, how Nitrogen gas protects foods from spoilage.
Packaging materials: Paper based packaging for foodDr. Jilen Mayani
Paper is a very versatile material. It is produced from cellulosic, naturally renewable fibres. It is therefore considered as an environmentally friendly material, being easily recycled, composted or incinerated after use. It may be used in food packaging applications within a wide range of grammages, being designed as wrapping paper, folding box board or corrugated board, for direct or indirect contact, i.e. as primary, secondary or tertiary packaging. Other paper grades, such as tissue paper, may be used in occasional contact with foodstuffs.
When paper and paper based products are intended, or likely, to come into contact with food, manufacturers follow relevant and acknowledged regulations and guidelines to design manufacturing processes and recipes, and ensure consumer safety.
This presentation gives an overview of edible packaging and various films and coatings used. It also deals with various fruits and vegetable which can be coated to extend the shelf life. It also deals with the companies manufacturing these kind of innovative packages and their future scope.
This introduces the materials, technologies and recycling of packaging system for milk and butter as it is an important link in the entire chain of production, storage, transportation and distribution.
Retort Pouch Technology From Indonesia Toppan PrintingToto Hadi
This technology still going to grouht, but many user not yet clearly understanding this technology and not many supplier have capability to supplies this pouch.
Please contact to me for trusted your retort supplier
Aseptic, intelligent and retort packaging Suganeswaran S
The above presentation discuss about the morden packaging techniques and methods used in food industries. Aseptic packaging, intelligent packaging and retort packaging. The morden method of food packaging to increase the self life and reduce the microbial load in food. The packaging materials used and its reactions with the food all are been discussed. The morden methods of food products packaging techniques are been used in many food industries who all are manufacturing perishable food stuffs.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
2. Topic- Packaging materials and systems
for liquid, concentrated, dried, frozen
and fat-rich dairy products.
Course Code: AHD - 411
Guided by-
Dr. Anuj Gautam
Presented by:
Shreya Rai
R-13042
3. Packaging Materials
Paperboard
Paperboard is the main material in our cartons. It provides stability, strength and
smoothness to the printing surface.
Polyethylene
Polyethylene protects against outside moisture and enables the paperboard to stick
to the aluminium foil.
Aluminium foil
Aluminium foil protects against oxygen and light to maintain the nutritional value
and flavours of the food in the package in ambient temperatures.
4.
5. A retort pouch is a flexible package in which prepared food is hermetically sealed
for long term unrefrigerated storage. Retort is a process that uses heat and
pressure to cook food in sealed packages.
It is the most acceptable form of food preservation in rigid, semi rigid and flexible
packaging system.
AIMS OF RETORT PACKAGING:
•To destroy microorganisms by heating.
•Thermal processing of food with package itself.
•To protect the food from chemical enzymes.
•To make commercially sterile food.
Benefits:
• Offer greater shelf appeal as there’s a larger area for graphics and text.
• Can be manufactured in numerous sizes and shapes
6. • Selection of the correct packaging material provides superb product protection,
optimal chemical resistance and an oxygen barrier
• Offer high temperature resistance, toughness and printability
• Products have a longer shelf-life
• Easier to distribute and therefore have lower transportation costs
• Heat sealable and sterilisable
• Easy opening and reclose
• Easy storage
• Larger surface area for marketing information
• No refrigeration required
• Microwavable
9. TYPES
1.Cream
Cream is a yellowish component of milk, rich in fat globules, that rises to the surface
naturally if milk is allowed to stand.
a. Low fat cream containing milk fat not less than 25% by weight.
b. Medium fat cream containing milk fat not less than 40% by weight.
c. High fat cream containing milk fat not less than 60% by weight.
2. Butter
Butter may be defined as fat concentrate, which is obtained by churning cream,
gathering the fat into a compact mass and then working it. Butter consists of 80-90%
fat with maximum of 16% water.
3. Fat Spreads
Fat spreads are solid plasticized foods of water in fat type of emulsion which by
principle contain an aqueous phase as well as fats and oils.
4. Ghee
Ghee means the pure heat clarified fat derived solely from milk or curd or from desi
(cooking) butter or from cream to which no colouring matter or preservative has
been added. It contains 99-99.5% fat.
10. 5. Butter oil
Butter oil and Anhydrous Milk fat / Anhydrous Butter oil means the fatty products
derived exclusively from milk and/ or products obtained from milk by means of
process which result in almost total removal of water and milk solids not fat.
Packaging of Cream
The exclusion of light is important as light can initiate auto oxidation of milk fat
resulting in the production of rancid flavors.
Cream may be tainted by the absorption of odors from various sources and
packaging material must, therefore, be impermeable to gases.
The absorption of moisture can cause the quality of cream to deteriorate and
packaging must, therefore, be impermeable to both.
The design of the container can also influence product quality. With some creams
serum separation may occur during storage and the ability to shake the contents to
ensure mixing can be important to consumer acceptability.
11. Table cream: Table cream is packaged for retail sale in units similar to those for milk such as
glass bottle, paper carton, low density polyethylene sachet, plastic bottles etc. When table
cream is produced for the purpose of coffee whitening, UHT processing is combined with
aseptic packaging.
PACKAGING FOR PASTEURIZED CREAM
Retail packaging:
Pasteurized cream is packaged in cartons and bottles for retail sale with package size usually
being in the range of approximately 100-1000 ml.
The most common form of packaging used is the injection moulded polystyrene pot, or flat
topped round container.
To improve the barrier properties of plastics packaging for fresh cream, multilayer materials
may incorporate an ethylene vinyl alcohol (EVOH) layer. Once filled, the containers are closed
with a heat sealed polyethylene/ aluminum foil laminate.
Bulk packaging:
It may be used for catering or institutional use. Normally plastic (e.g. polythene) bags
contained in plastic crates or cardboard cartons are used for bulk packaging. In this case
package size ranges from 5 to 25 liters.
12. Packaging of Sterilized Cream
In case of retort sterilized cream, tin cans and glass bottles are used for packaging.
Sterilization takes place in a retort or hydrostatic sterilizer using temperature time regimes of
110-120°C for 10-20 min.
A calcium sequestering agent, such as sodium citrate or a sodium phosphate, may be added to
make more casein available for stabilizing the emulsion.
The unit packaging volumes have to be relatively small (400 ml) because of the restriction on
heat transfer with larger volumes
Packaging of UHT CREAM
•Aseptic canning
•Plastic (polythene), paper and foil laminate cartons and Plastic (polystyrene or
polypropylene).
•Lacquered aluminum or tin plate cans are used for Aerosol cream.
•Preformed pots or with laminates.
•Plastic ( polythene) bag contained within a cardboard carton is used for bulk packaging of
UHT cream with unit volumes are in the range 5-1000L.
13. Packaging of Butter
Packaging material for butter should have excellent barrier properties such as:
· It should be moisture proof
· It should be grease proof
· It should be impervious to light
· It should have good strength
Some of the packaging materials used for butter packaging are:
i) Parchment paper – also known as butter paper.
ii) wax coated paper
iii) cellophane
iv) cardboard boxes and teak wood drums lined with food grade plastic
v) Aluminium foil laminates
vi) Lacquered tin cans
Techniques of packaging
1.Manual moulding and wrapping
2. Mechanical moulding and hand wrapping
14. Packaging of Ghee
Requirements for packaging material:
1 .Good fat resistance
2. Barrier properties against oxygen and moisture.
3. It shall be temper proof.
A major portion of ghee is packed in lacquered tinplate containers of capacities
ranging from 250 litres to 15 litres / kilograms. Since the product is very sensitive to
oxygen, the tinplate containers are filled to the brim without any air gap.
For shorter shelf-life, 200 ml, 500 ml and 1 litre capacity pouches made of
polyethylene film, multi – layer co-extruded films of LDPE/HDPE are used.
For long – term storage, stainless steel containers or tinplate cans are desirable.
Ghee is also marketed in lined cartons with flexible laminated plastics as inner liner
materials, laminates and Bag - in - Box containers. The bag is vacuum filled and
inserted manually into the box. Seven layer Nylon containing self standing pouch
with closure is also used.
Another form is consisting of a multi-ply collapsible bag with a tap which can be
housed in a rigid outer container. The container can be a box, a crate or a drum
whose capacity varies between 3 and 200 liters.
15.
16. Includes milk products like Butter milk, Whey, Lassi, and different types of milk like,
Recombined milk, Toned milk, Vitaminised milk etc.
Packaging
Paper Based - Paper-based packaging is lightweight and low cost, but it’s susceptible
to moisture and tearing.
Plastic - Plastic is used to hold fresh and pasteurized milk. Some of the drawbacks of
plastic containers include becoming fragile at low temperatures and melting at high
temperatures.
Glass - Glass bottles are still used today by some dairy manufacturers, not as widely
used as plastic or paper-based packaging. While glass is heat resistant, it is also
heavy and fragile.
Metal - Both aluminum and tin are used to make cans for milk products, such as
evaporated milk and sweetened condensed milk. Advantages are the strength of the
material, grease-proof qualities, and the barrier properties. One drawback to
aluminum is its vulnerability to acids. Tin tends to be heavy and expensive.
Wood - Barrels made from wood are used for bulk packaging of such milk products
as sweetened condensed milk and buttermilk. It avoids tainting the milk.
19. Evaporated milk
Evaporated milk is a concentrated milk product with a dry matter content of at least 25%.
Heat desiccated milk products include-
•Khoa- It is a partially dehydrated whole milk product prepared by the continuous heating of
milk in a karahi over a direct fire while also constantly stirring cum scraping by using a khunti
till it reaches its semi solid consistency(Pat).
Types of Khoa-
Pindi: Moisture- 31-33%
Dhap: Moisture- 37-44%
Danedar: Moisture- 35-40%
•Rabri- It is a concentrated and sweetened whole milk product containing several layers of
clotted cream. It contains 30% moisture.
Condensed milk
Condensed milk is a concentrated milk product with sugar. The product usually contains not
more than 27% of water , 43–46% of sugar and at least 28% of dry matter of milk. Condensed
milk has a pale yellow colour, smooth consistency and high viscosity and is a sweet milk
product.
20. Packaging of Concentrated milk products
Doy-pack packaging- The Integrated Plant offers the largest choice of condensed milk
in Doy-Pack pack among Ukrainian manufacturers. The barrier properties of the pack
are the same as those of the tin can and by convenience of opening exceed it – each
pack is provided with threaded cover.
DOY PACK PACKAGING
Polyamide hose- It is the ideal solution for confectionary enterprises and shop. The
advantage of this pack is convenience in removal of product, no bulky reusable
containers, inexpensive packing, convenience of disposal.
Industrial containers- Condensed milk in industrial containers is the optimum
solution for large confectionaries. Various industrial containers, both by weight and
shape, make it possible to choose the alternative suitable for the production.
Condensed milk is also delivered in tank trucks with capacity of 4 to 30 t.
Depending on kind of condensed milk and packaging, this product can be stored for
5 to 12 months.
21.
22. It is a manufactured dairy product made by evaporating milk to dryness. The
purpose of drying milk is to preserve it; milk powder has a far longer shelf life than
liquid milk and does not need to be refrigerated, due to its low moisture content.
Another purpose is to reduce its bulk for economy of transportation.
Powdered milk and dairy products include such items as:
•Dry whole milk
•Nonfat (skimmed) dry milk
•Dry buttermilk
•Dry whey products
•Dry dairy blends.
PACKAGING
Milk powders readily take up moisture from the air, leading to a rapid loss of quality
and caking or lumping.
Packaging is chosen to provide a barrier to moisture, oxygen and light
Milk powder is packed into either plastic-lined multi-wall bags (25 kg) or bulk
bins(600 kg).
They are often packed under nitrogen gas to protect the product from oxidation and
to maintain their flavour and extend their keeping quality. Packaging is chosen to
provide a barrier to moisture, oxygen and light. Bags generally consist of several
layers to provide strength and the necessary barrier properties.
23.
24. Ice cream is a frozen dairy product made by suitable blending and processing of cream
and other products, together with sugar, flavor with or without stabilizer, colour with
incorporation of air during the freezing process.
Types of Icecreams-
Plain- Colour and flavouring ingredients amount less than 5%.
Chocolate- Flavoured with cocoa or chocolate
Fruit- Containing fruits like strawberry, pineapple. etc.
Nut- Containing nuts like almond, walnut, cashewnut etc.
Milk ices or Milk lollies- Contains milk fat not more than 2%, protein not less than
3.5%, T.S. not less than 20%.
Ices- Made from fruit juice, sugar, stabilizer etc. No any dairy product.
Sherbet- Similar to ices but used dairy product, instead of water.
Novelties- It is the ice cream having specially shape, size and colour.
Soft icecream- Sold as drawn from the freezer without hardening.
25. Packaging Of Ice creams
Ice-cream sticks and ice-cream cones are the most common types.
Ice-cream sticks come individually in flowpack bags. The ice-cream sticks in
flowpack bags are packaged into cartons which are then case-packed for
distribution.
In the case of ice-cream cones, subsequent to the freezing process, these are
presented on trays with various units which are later packed into cartons
Once the trays have been completed they are wrapped using flowpack machinery
where an inert gas may be injected to preserve the product before they are boxed.
There are 2 types of Packaging-
•Multiservice (Tinned/ Steel can)
•Single service (Carton)
27. Impacts of Packaging materials
The principal roles of food packaging are to protect food products from outside
influences and distribution damage, to contain the food, and to provide consumers
with ingredient and nutrition information.
Package design and construction play significant roles in determining the shelf life of a
food product. The right selection of packaging materials and technologies maintains
product quality and freshness during distribution and storage.
Negative health effects
PVC (polyvinyl chloride)
The World Health Organization's International Agency for Research on Cancer (IARC)
has recognized the chemical used to make PVC, adipates and pthalates as a known
human carcinogen.
Vinyl chloride monomer a known human carcinogen that causes a rare cancer of the
liver.
Dioxins are a global health threat because they persist in the environment and can
travel long distances. At very low levels, dioxins have been linked to immune system
suppression, reproductive disorders, a variety of cancers, and endometriosis
28. Polycarbonates, whose primary building block is bisphenol A (BPA), a hormone
disrupter that releases into food and liquid and acts like estrogen.
A more recent animal study suggests that even low-level exposure to BPA results in
insulin resistance, which can lead to inflammation and heart disease.
Negative effects on environment
Plastics are durable and degrade very slowly.
In some cases, burning plastic can release toxic fumes.
The manufacturing of plastics often creates large quantities of chemical pollutants.
Unfortunately, recycling plastics has proven difficult. The biggest problem with
plastic recycling is that it is difficult to automate the sorting of plastic waste, and so it
is labor intensive.
29. Residual toxic compounds likely to be transferred to food through
plastics
Monomers and oligomers: Polymers have very high molecular weight and hence not assimilated
by the body. Monomers being small may be assimilated by the body and therefore may pose
health problems.
Polymerization residues: There may be presence of catalysts, solvents, emulsifiers and wetting
agents having low molecular weight
During film container manufacturing a variety of processing aids are added which are:
a. Antioxidants
b. Antiblock agents
c. Antistatic agents
Absence of antistatic agents may lead to:
1. Fire/spark hazard
2. Dust attraction and
3. Difficulty in Derolling
d. Plasticizers
e. Lubricants
f. Slip agents
30. FUTURE GOALS IN MAKING PACKAGING MATERIALS
1. Use of new migration resistant plasticizers.
2. Improvement in formulation to reduce greatly their use.
3. Surface treatment of finished plastic products to reduce plasticizer migration (U.V.
light, laser radiation treatments given).
4. Plasticizers related to cancer by International Agency for Research on Cancer are:
DEHA- BIS-2-Ethyl Hexyl Adipate BBP: Butyl Phenyl Methyl or Butyl Benzyl Phthalate
DEHP- Bis-2- Ethyl Myxyl or Di-Ethyl Hexyl Phthalate.
5. To use biodegradable plastics as far as possible.