Oml753 selection of materials l t p c
•Download as DOCX, PDF•
0 likes•500 views
This document outlines the objectives and units of a course on selection of materials. The course exposes students to the basics of selecting materials for engineering purposes and different classes of materials like metals, polymers, ceramics, composites and their properties. The units cover topics like material properties, manufacturing processes, economic analysis, materials selection charts, testing of different materials and their applications. The overall aim is to help students understand the parameters for selecting appropriate materials.
Report
Share
Report
Share
Recommended
Material Selection of Smartphone Body Shell [Autosaved].ppt 2
This document compares various materials for use as smartphone shells based on their fracture toughness, thermal conductivity, stiffness, embodied energy, and other properties. It presents data on aluminum, polycarbonate, carbon fiber reinforced polymer (CFRP), epoxies, and polymethyl methacrylate (PMMA) in tables and charts. The objective is to optimize fracture toughness while minimizing mass. Polycarbonate has the best material index values for thermal conductivity and embodied energy, while aluminum ranks highest for stiffness and CFRP for fracture toughness. The conclusion is that polycarbonate may be the best material for smartphone shells based on the design criteria and objectives.
THERMAL & STRUCTURAL ANALYSIS ON DISC BRAKE ROTOR WITH DRAFTING USING CATIA ...
Project consist of two types of analysis thermal , structural & VBA Programming.
Thermal analysis is done to check the thermal resistance of model Honda Unicorn 160.
Structural analysis is done to find the strength of the model.
VBA programming is used to automate drafting task.
Material selection for different components
Medium carbon steel is selected for the design because it has a high performance index and low cost. Polytetrafluoroethylene (PTFE) GF1 is selected, despite its high cost, for safety purposes. Wrought Ferritic Stainless Steel is selected because it has a good performance index and good thermal properties. Common hard brick is selected for its low cost, good thermal conduction, and ease of manufacture. Nodular (spheroidal, ductile) Cast Iron is selected for its good performance index and low cost. Low Carbon steel is suitable for designs requiring a material that is low cost, stiff, and strong.
Composite materials
Introduction
Properties
Factors affecting Composites
Phases of Composites
Classification of Composites
Manufacturing of Composites
Utilization and Application
Why to use Composites
Advantages and Disadvantages
Failures
References
A composite material is made by combining two or more materials
The two materials work together to give the composites a unique properties
However within the composite you can easily tell the different materials apart as they do not dissolve or blend into each other.
High Strength-to-weight ratio
Corrosion Resistance
Wear Resistance
Low electrical conductivity
Lower cost
Easy processing
Covers almost all application areas
Type of Reinforcement
Reinforcement size and its Orientation
Matrix Type
Fiber-Volume-Fraction (FVF)
Bonding between Reinforcement and matrix
Type of Reinforcement
Reinforcement size and its Orientation
Matrix Type
Fiber-Volume-Fraction (FVF)
Bonding between Reinforcement and matrix
Generations of computer powerpoint by Ruby
Charles Babbage is considered the father of computing for his concept and later invention of the Analytical Engine in 1837, which contained an arithmetic logic unit, basic flow control, and integrated memory, making it the first general-purpose computer concept. Computers have progressed through five generations from vacuum tubes to transistors to integrated circuits to microprocessors and now artificial intelligence. Each generation brought improvements in size, speed, reliability and cost reduction while expanding the uses of computers beyond mathematical calculation.
Emerging Trend #2 | Artificial Intelligence, construction and operations of b...
Artificial Intelligence is questioning business models in all industries. It is opening promising new avenues for the future of the design, building and operations of buildings and mobility infrastructure. AI is also at the very heart of smart city and raises new issues in the governance of territories.
generation of computers
This document summarizes the five generations of computers from the first generation in 1945 to the present fifth generation. The first generation used vacuum tubes and were very large. The second generation used transistors, which were smaller. The third generation used integrated circuits on silicon chips, making computers even smaller. The fourth generation used VLSI technology to put millions of transistors on single chips, reducing costs. The fifth generation aims to develop artificial intelligence capabilities through parallel processing. Each generation brought improvements in size, cost, reliability and capabilities over previous generations due to advances in components and technology.
5.material selection criteria
The document discusses material selection criteria for plastics in specific applications. It outlines the process of selecting plastics which involves defining the product purpose, assessing material properties, and considering factors like strength, temperature resistance, wear resistance, degradation resistance, and special properties. The document provides data on various plastic materials and their properties to guide selection. Key properties discussed include tensile strength, fatigue resistance, toughness, corrosion resistance, coefficient of friction, and electrical and thermal properties. Examples are given of applications suited for different plastics based on required characteristics.
Recommended
Material Selection of Smartphone Body Shell [Autosaved].ppt 2
This document compares various materials for use as smartphone shells based on their fracture toughness, thermal conductivity, stiffness, embodied energy, and other properties. It presents data on aluminum, polycarbonate, carbon fiber reinforced polymer (CFRP), epoxies, and polymethyl methacrylate (PMMA) in tables and charts. The objective is to optimize fracture toughness while minimizing mass. Polycarbonate has the best material index values for thermal conductivity and embodied energy, while aluminum ranks highest for stiffness and CFRP for fracture toughness. The conclusion is that polycarbonate may be the best material for smartphone shells based on the design criteria and objectives.
THERMAL & STRUCTURAL ANALYSIS ON DISC BRAKE ROTOR WITH DRAFTING USING CATIA ...
Project consist of two types of analysis thermal , structural & VBA Programming.
Thermal analysis is done to check the thermal resistance of model Honda Unicorn 160.
Structural analysis is done to find the strength of the model.
VBA programming is used to automate drafting task.
Material selection for different components
Medium carbon steel is selected for the design because it has a high performance index and low cost. Polytetrafluoroethylene (PTFE) GF1 is selected, despite its high cost, for safety purposes. Wrought Ferritic Stainless Steel is selected because it has a good performance index and good thermal properties. Common hard brick is selected for its low cost, good thermal conduction, and ease of manufacture. Nodular (spheroidal, ductile) Cast Iron is selected for its good performance index and low cost. Low Carbon steel is suitable for designs requiring a material that is low cost, stiff, and strong.
Composite materials
Introduction
Properties
Factors affecting Composites
Phases of Composites
Classification of Composites
Manufacturing of Composites
Utilization and Application
Why to use Composites
Advantages and Disadvantages
Failures
References
A composite material is made by combining two or more materials
The two materials work together to give the composites a unique properties
However within the composite you can easily tell the different materials apart as they do not dissolve or blend into each other.
High Strength-to-weight ratio
Corrosion Resistance
Wear Resistance
Low electrical conductivity
Lower cost
Easy processing
Covers almost all application areas
Type of Reinforcement
Reinforcement size and its Orientation
Matrix Type
Fiber-Volume-Fraction (FVF)
Bonding between Reinforcement and matrix
Type of Reinforcement
Reinforcement size and its Orientation
Matrix Type
Fiber-Volume-Fraction (FVF)
Bonding between Reinforcement and matrix
Generations of computer powerpoint by Ruby
Charles Babbage is considered the father of computing for his concept and later invention of the Analytical Engine in 1837, which contained an arithmetic logic unit, basic flow control, and integrated memory, making it the first general-purpose computer concept. Computers have progressed through five generations from vacuum tubes to transistors to integrated circuits to microprocessors and now artificial intelligence. Each generation brought improvements in size, speed, reliability and cost reduction while expanding the uses of computers beyond mathematical calculation.
Emerging Trend #2 | Artificial Intelligence, construction and operations of b...
Artificial Intelligence is questioning business models in all industries. It is opening promising new avenues for the future of the design, building and operations of buildings and mobility infrastructure. AI is also at the very heart of smart city and raises new issues in the governance of territories.
generation of computers
This document summarizes the five generations of computers from the first generation in 1945 to the present fifth generation. The first generation used vacuum tubes and were very large. The second generation used transistors, which were smaller. The third generation used integrated circuits on silicon chips, making computers even smaller. The fourth generation used VLSI technology to put millions of transistors on single chips, reducing costs. The fifth generation aims to develop artificial intelligence capabilities through parallel processing. Each generation brought improvements in size, cost, reliability and capabilities over previous generations due to advances in components and technology.
5.material selection criteria
The document discusses material selection criteria for plastics in specific applications. It outlines the process of selecting plastics which involves defining the product purpose, assessing material properties, and considering factors like strength, temperature resistance, wear resistance, degradation resistance, and special properties. The document provides data on various plastic materials and their properties to guide selection. Key properties discussed include tensile strength, fatigue resistance, toughness, corrosion resistance, coefficient of friction, and electrical and thermal properties. Examples are given of applications suited for different plastics based on required characteristics.
Carbon fibre reinforce polymer(cfrp)
Carbon fibre reinforced polymer (CFRP) cables are used for suspended bridges due to their resistance to corrosion, stress corrosion, fatigue, design faults and production faults. CFRP cables consist of extremely thin carbon fibres embedded in a polymer resin matrix. CFRP cables have higher strength and modulus of elasticity than steel cables, while also having lower density, making them lighter. CFRP cables are increasingly being used in bridges due to advantages like corrosion resistance, light weight, strength, damping characteristics, and resistance to fatigue.
Evaluation of pitting corrosion behavior of 316 l and 304 stainless steels ex...
Evaluation of pitting corrosion behavior of 316 l and 304 stainless steels ex...Dhaiveegan Periyathambi
Evaluation of pitting corrosion behavior of 316 l and 304 stainless steels exposed in industrial marine-urban environment field studyApplication of composite materials in aerospace industry (1)
Using the scholar data and researcher point of view on composite materials. We illustrate the application of composite material in aerospace industry. Composites are highly efficient to make the parts and structure of aircrafts. We found the characteristics of the composite material make it very suitable material for aerospace industry. Composites like carbon fiber, carbon epoxy, and glass epoxy are very light and high strength which is mostly used in aircraft industries. In addition, our study takes the first step to highlight the uses of composite material to manufacture the different parts of aircraft's.
Advancing Additive Manufacturing In Aerospace
Aerospace is leading the way in adopting additive manufacturing (AM) for the
manufacturing industry.
Evolution of additive manufacturing
This presentation is made on the Evolution of Additive Manufacturing. It has a brief description of Additive Manufacturing. It also has a history of Additive Manufacturing, followed by how 3D printing technology was developed and printers were evolved. Also, how it gained media attention and also its application in various fields are covered.
Computer generation
The document outlines the six generations of computers from 1940 to present day. The first generation used electro-mechanical components like relays and vacuum tubes. The second generation introduced transistors, making computers smaller and more efficient. The third generation saw the invention of integrated circuits and microprocessors. Personal computers emerged in the fourth generation using microprocessor chips. The fifth generation focused on artificial intelligence. And the sixth generation features parallel computing with hundreds of processors working simultaneously.
Life Cycle Analysis for Composites and its Impact on Sustainability
This document discusses sustainability and life cycle analysis (LCA). It provides examples of using LCA to compare materials like steel, aluminum, and composites. LCA examines the environmental impacts of a product over its entire lifecycle from raw material extraction to end of life. Studies show composites can provide opportunities in areas like transportation, construction, and infrastructure by reducing weight and improving recyclability compared to other materials. Market forces and collaboration are driving increased focus on sustainability.
Formation of carbon fibers and application
Carbon fibers are very thin strands made mostly of carbon atoms that are exceptionally strong for their size. They are created by heating and processing precursor materials like polyacrylonitrile, rayon or petroleum pitch in an oxygen-free environment to remove non-carbon atoms. Individual carbon fibers are twisted together to form stronger yarns, which are then combined with epoxy and molded to create lightweight yet durable composite materials. These composites are used widely in aerospace, automotive, sporting goods and other industries where high strength and low weight are important. While carbon fiber was initially very expensive, production innovations have significantly reduced costs and expanded its applications.
Explore Abaqus-Explicit Techniques.pdf
The document provides an overview of techniques for using Abaqus/Explicit for dynamic simulations. It discusses when to use Abaqus/Explicit, applications such as impact and crash simulations, defining the explicit procedure, quasi-static simulations using increased load rates or mass scaling, advanced capabilities like ALE adaptive meshing, and tips for managing large models and reducing CPU time. The presentation covers the basics of explicit dynamics, contact modeling, stable time increments, and evaluating quasi-static solutions.
Composites
Composites are materials made from two or more constituent materials with significantly different physical or chemical properties that remain separate and distinct at the macroscopic or microscopic level within the finished structure. Composites have improved strength, stiffness, and other properties over the individual constituent materials alone. Common composite materials include fiberglass and carbon fiber reinforced plastics. Composites are used in a wide range of industries including construction, transportation, aerospace, and consumer goods due to their high strength to weight ratio and ability to be tailored to specific applications.
Computer generation
The document discusses the five generations of computers. The first generation used vacuum tubes and punched cards, the second used transistors instead of vacuum tubes, and the third used integrated circuits made from many transistors. The fourth generation used silicon chips which were reliable and cheap, and the fifth generation uses artificial intelligence and parallel processing with superconductors.
materials and engineering
Civil engineering involves directing natural forces for human use and convenience. Engineering structures must be safe, serviceable, and economical, requiring knowledge of appropriate materials. The engineer should understand material properties, specifications, testing, and inspection. Selection depends on material types, costs, preparation methods, and testing to specifications. Materials are classified by their internal structure and bonding, including metals, polymers, ceramics, composites, and reinforced composites. Standard specifications established by organizations like ASTM and ACI provide testing procedures and evaluation criteria.
Materials Technology for Engineers pre-test 1 notes
Materials are probably more deep-seated in our culture than most of us realize. Transportation, housing, clothing, communication, recreation, and food production virtually every segment of our everyday lives is influenced to one degree or another by materials. Historically, the development and advancement of societies have been intimately tied to the members’ ability to produce and manipulate materials to fill their needs. In fact, early civilizations have been designated by the level of their materials development (i.e., Stone Age, Bronze Age). The earliest humans had access to only a very limited number of materials, those that occur naturally: stone, wood, clay, skins, and so on. With time they
discovered techniques for producing materials that had properties superior to those of the natural ones; these new materials included pottery and various metals. Furthermore, it was discovered that the properties of a material could be altered by heat treatments and by the addition of other substances. At this point, materials utilization was totally a selection process, that is, deciding from a given, rather limited set of materials the one that was best suited for an application by virtue of its characteristics. It was not until relatively recent times that scientists came to understand the relationships between the structural elements of materials and their properties. This knowledge acquired in the past 60 years or so, has empowered them to fashion, to a large degree, the characteristics of materials. Thus, tens of
thousands of different materials have evolved with rather specialized characteristics that meet the needs of our modern and complex society; these include metals, plastics, glasses, and fibers. The development of many technologies that make our existence so comfortable
has been intimately associated with the accessibility of suitable materials. An advancement
in the understanding of a material type is often the forerunner to the stepwise progression of a technology. For example, automobiles would not have been possible without the availability of inexpensive steel or some other comparable substitute. In our contemporary era, sophisticated electronic devices rely on components that are made from what are called semiconducting materials.
Mme 323 materials science week 1 - intro to materials science & engineering
Strength to Weight Ratio is an important factor in this design.
Aluminum has a higher Strength to Weight Ratio than steel, making it lighter. However, polymers like polyethylene are even lighter than aluminum and can be easily molded.
While both aluminum and polyethylene meet the design requirements, polyethylene is lower in cost and lighter. Therefore, polyethylene would be the best choice of material for the soda drink container design. Its light weight, high strength, corrosion resistance and low manufacturing cost make it suitable to produce large volumes of containers economically.
Material Science and Metallurgy
undamentals of Crystal Structure: BCC, FCC and HCP Structures, coordination number and atomic packing factors, crystal imperfections -point line and surface imperfections. Atomic Diffusion: Phenomenon, Fick’s laws of diffusion, factors affecting diffusion.
unit1.pptx
The document provides an overview of the course "Testing of Materials". It discusses the course objectives, which are to understand various destructive and non-destructive testing methods of materials and their industrial applications. The course is divided into 5 units that cover topics such as the introduction to materials testing, mechanical testing, non-destructive testing, material characterization testing, and other testing methods. The introduction unit discusses the overview of materials, classification of material testing, purpose of testing, selection of materials, development of testing, testing organizations and standards, and result analysis.
Oml751 testing of materials
This document outlines the course objectives and units for OML751 Testing of Materials. The course aims to understand various destructive and non-destructive testing methods for materials and their industrial applications. The five units cover: introduction to materials testing; mechanical tests like hardness, tensile, and impact; non-destructive tests including visual, liquid penetrant, magnetic particle, and ultrasonic; material characterization tests using microscopy and spectroscopy; and other tests such as thermal, thermo-mechanical, and chemical analyses. The outcomes are to identify suitable testing techniques for industrial components and understand different techniques, applications, and limitations.
materials presentation............
This document summarizes information about biomaterials and nanomaterials. It discusses how biomaterials are materials used as medical implants and devices to replace body parts, and lists some common classes of biomaterials like metals, ceramics, polymers and composites. It also provides an introduction to nanomaterials, describing them as materials with at least one dimension less than 100 nanometers. Examples of applications of nanotechnology in different fields like medicine, information technology and consumer goods are given. The document also discusses polyvinyl chloride (PVC), its properties and common uses. It covers non-destructive testing methods for materials and lists some international standards for mechanical testing of metals, plastics and other materials.
chapter1_intro_sainsbahan_edar (2).pdf material science
material science chapter 1 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
New spec-all-v2
Changing Magnitude and Direction of Force discusses new and emerging technologies and their impact on sustainability, people, environment, and culture. It covers developments in areas like energy generation and storage, new materials, and mechanical devices. The document provides information on material properties, forces and stresses, design strategies, communication of design ideas, and other principles of designing and making.
Evaluation Methods for Material Selection with Case Study
Here I have discussed meaning and various material selection methods which can be used effectively.
To elaborate concept of material selection, a case study is provided of table along with mathematical calculations and process steps to reach at final optimum material selection.
Thus case study shows potential of Weighted Property Indices method. The case study serves as a beneficial example for material selection of modern automobiles.
Manufacturing Properties of the materials
Manufacturing technology refers to the tools, techniques, and processes used to produce goods efficiently and cost-effectively. The goal is to meet customer requirements while maximizing productivity and profitability. Examples of goods produced using manufacturing technology include consumer products, industrial machinery, automobiles, aerospace products, medical devices, and building materials. Manufacturing plays a crucial role in economies by creating jobs, driving innovation, and supporting other sectors. It contributes significantly to GDP and exports. In India, the diverse manufacturing sector comprises industries like textiles, chemicals, pharmaceuticals, automobiles, and electronics.
More Related Content
What's hot
Carbon fibre reinforce polymer(cfrp)
Carbon fibre reinforced polymer (CFRP) cables are used for suspended bridges due to their resistance to corrosion, stress corrosion, fatigue, design faults and production faults. CFRP cables consist of extremely thin carbon fibres embedded in a polymer resin matrix. CFRP cables have higher strength and modulus of elasticity than steel cables, while also having lower density, making them lighter. CFRP cables are increasingly being used in bridges due to advantages like corrosion resistance, light weight, strength, damping characteristics, and resistance to fatigue.
Evaluation of pitting corrosion behavior of 316 l and 304 stainless steels ex...
Evaluation of pitting corrosion behavior of 316 l and 304 stainless steels ex...Dhaiveegan Periyathambi
Evaluation of pitting corrosion behavior of 316 l and 304 stainless steels exposed in industrial marine-urban environment field studyApplication of composite materials in aerospace industry (1)
Using the scholar data and researcher point of view on composite materials. We illustrate the application of composite material in aerospace industry. Composites are highly efficient to make the parts and structure of aircrafts. We found the characteristics of the composite material make it very suitable material for aerospace industry. Composites like carbon fiber, carbon epoxy, and glass epoxy are very light and high strength which is mostly used in aircraft industries. In addition, our study takes the first step to highlight the uses of composite material to manufacture the different parts of aircraft's.
Advancing Additive Manufacturing In Aerospace
Aerospace is leading the way in adopting additive manufacturing (AM) for the
manufacturing industry.
Evolution of additive manufacturing
This presentation is made on the Evolution of Additive Manufacturing. It has a brief description of Additive Manufacturing. It also has a history of Additive Manufacturing, followed by how 3D printing technology was developed and printers were evolved. Also, how it gained media attention and also its application in various fields are covered.
Computer generation
The document outlines the six generations of computers from 1940 to present day. The first generation used electro-mechanical components like relays and vacuum tubes. The second generation introduced transistors, making computers smaller and more efficient. The third generation saw the invention of integrated circuits and microprocessors. Personal computers emerged in the fourth generation using microprocessor chips. The fifth generation focused on artificial intelligence. And the sixth generation features parallel computing with hundreds of processors working simultaneously.
Life Cycle Analysis for Composites and its Impact on Sustainability
This document discusses sustainability and life cycle analysis (LCA). It provides examples of using LCA to compare materials like steel, aluminum, and composites. LCA examines the environmental impacts of a product over its entire lifecycle from raw material extraction to end of life. Studies show composites can provide opportunities in areas like transportation, construction, and infrastructure by reducing weight and improving recyclability compared to other materials. Market forces and collaboration are driving increased focus on sustainability.
Formation of carbon fibers and application
Carbon fibers are very thin strands made mostly of carbon atoms that are exceptionally strong for their size. They are created by heating and processing precursor materials like polyacrylonitrile, rayon or petroleum pitch in an oxygen-free environment to remove non-carbon atoms. Individual carbon fibers are twisted together to form stronger yarns, which are then combined with epoxy and molded to create lightweight yet durable composite materials. These composites are used widely in aerospace, automotive, sporting goods and other industries where high strength and low weight are important. While carbon fiber was initially very expensive, production innovations have significantly reduced costs and expanded its applications.
Explore Abaqus-Explicit Techniques.pdf
The document provides an overview of techniques for using Abaqus/Explicit for dynamic simulations. It discusses when to use Abaqus/Explicit, applications such as impact and crash simulations, defining the explicit procedure, quasi-static simulations using increased load rates or mass scaling, advanced capabilities like ALE adaptive meshing, and tips for managing large models and reducing CPU time. The presentation covers the basics of explicit dynamics, contact modeling, stable time increments, and evaluating quasi-static solutions.
Composites
Composites are materials made from two or more constituent materials with significantly different physical or chemical properties that remain separate and distinct at the macroscopic or microscopic level within the finished structure. Composites have improved strength, stiffness, and other properties over the individual constituent materials alone. Common composite materials include fiberglass and carbon fiber reinforced plastics. Composites are used in a wide range of industries including construction, transportation, aerospace, and consumer goods due to their high strength to weight ratio and ability to be tailored to specific applications.
Computer generation
The document discusses the five generations of computers. The first generation used vacuum tubes and punched cards, the second used transistors instead of vacuum tubes, and the third used integrated circuits made from many transistors. The fourth generation used silicon chips which were reliable and cheap, and the fifth generation uses artificial intelligence and parallel processing with superconductors.
What's hot (11)
Evaluation of pitting corrosion behavior of 316 l and 304 stainless steels ex...
Evaluation of pitting corrosion behavior of 316 l and 304 stainless steels ex...
Application of composite materials in aerospace industry (1)
Application of composite materials in aerospace industry (1)
Life Cycle Analysis for Composites and its Impact on Sustainability
Life Cycle Analysis for Composites and its Impact on Sustainability
Similar to Oml753 selection of materials l t p c
materials and engineering
Civil engineering involves directing natural forces for human use and convenience. Engineering structures must be safe, serviceable, and economical, requiring knowledge of appropriate materials. The engineer should understand material properties, specifications, testing, and inspection. Selection depends on material types, costs, preparation methods, and testing to specifications. Materials are classified by their internal structure and bonding, including metals, polymers, ceramics, composites, and reinforced composites. Standard specifications established by organizations like ASTM and ACI provide testing procedures and evaluation criteria.
Materials Technology for Engineers pre-test 1 notes
Materials are probably more deep-seated in our culture than most of us realize. Transportation, housing, clothing, communication, recreation, and food production virtually every segment of our everyday lives is influenced to one degree or another by materials. Historically, the development and advancement of societies have been intimately tied to the members’ ability to produce and manipulate materials to fill their needs. In fact, early civilizations have been designated by the level of their materials development (i.e., Stone Age, Bronze Age). The earliest humans had access to only a very limited number of materials, those that occur naturally: stone, wood, clay, skins, and so on. With time they
discovered techniques for producing materials that had properties superior to those of the natural ones; these new materials included pottery and various metals. Furthermore, it was discovered that the properties of a material could be altered by heat treatments and by the addition of other substances. At this point, materials utilization was totally a selection process, that is, deciding from a given, rather limited set of materials the one that was best suited for an application by virtue of its characteristics. It was not until relatively recent times that scientists came to understand the relationships between the structural elements of materials and their properties. This knowledge acquired in the past 60 years or so, has empowered them to fashion, to a large degree, the characteristics of materials. Thus, tens of
thousands of different materials have evolved with rather specialized characteristics that meet the needs of our modern and complex society; these include metals, plastics, glasses, and fibers. The development of many technologies that make our existence so comfortable
has been intimately associated with the accessibility of suitable materials. An advancement
in the understanding of a material type is often the forerunner to the stepwise progression of a technology. For example, automobiles would not have been possible without the availability of inexpensive steel or some other comparable substitute. In our contemporary era, sophisticated electronic devices rely on components that are made from what are called semiconducting materials.
Mme 323 materials science week 1 - intro to materials science & engineering
Strength to Weight Ratio is an important factor in this design.
Aluminum has a higher Strength to Weight Ratio than steel, making it lighter. However, polymers like polyethylene are even lighter than aluminum and can be easily molded.
While both aluminum and polyethylene meet the design requirements, polyethylene is lower in cost and lighter. Therefore, polyethylene would be the best choice of material for the soda drink container design. Its light weight, high strength, corrosion resistance and low manufacturing cost make it suitable to produce large volumes of containers economically.
Material Science and Metallurgy
undamentals of Crystal Structure: BCC, FCC and HCP Structures, coordination number and atomic packing factors, crystal imperfections -point line and surface imperfections. Atomic Diffusion: Phenomenon, Fick’s laws of diffusion, factors affecting diffusion.
unit1.pptx
The document provides an overview of the course "Testing of Materials". It discusses the course objectives, which are to understand various destructive and non-destructive testing methods of materials and their industrial applications. The course is divided into 5 units that cover topics such as the introduction to materials testing, mechanical testing, non-destructive testing, material characterization testing, and other testing methods. The introduction unit discusses the overview of materials, classification of material testing, purpose of testing, selection of materials, development of testing, testing organizations and standards, and result analysis.
Oml751 testing of materials
This document outlines the course objectives and units for OML751 Testing of Materials. The course aims to understand various destructive and non-destructive testing methods for materials and their industrial applications. The five units cover: introduction to materials testing; mechanical tests like hardness, tensile, and impact; non-destructive tests including visual, liquid penetrant, magnetic particle, and ultrasonic; material characterization tests using microscopy and spectroscopy; and other tests such as thermal, thermo-mechanical, and chemical analyses. The outcomes are to identify suitable testing techniques for industrial components and understand different techniques, applications, and limitations.
materials presentation............
This document summarizes information about biomaterials and nanomaterials. It discusses how biomaterials are materials used as medical implants and devices to replace body parts, and lists some common classes of biomaterials like metals, ceramics, polymers and composites. It also provides an introduction to nanomaterials, describing them as materials with at least one dimension less than 100 nanometers. Examples of applications of nanotechnology in different fields like medicine, information technology and consumer goods are given. The document also discusses polyvinyl chloride (PVC), its properties and common uses. It covers non-destructive testing methods for materials and lists some international standards for mechanical testing of metals, plastics and other materials.
chapter1_intro_sainsbahan_edar (2).pdf material science
material science chapter 1 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
New spec-all-v2
Changing Magnitude and Direction of Force discusses new and emerging technologies and their impact on sustainability, people, environment, and culture. It covers developments in areas like energy generation and storage, new materials, and mechanical devices. The document provides information on material properties, forces and stresses, design strategies, communication of design ideas, and other principles of designing and making.
Evaluation Methods for Material Selection with Case Study
Here I have discussed meaning and various material selection methods which can be used effectively.
To elaborate concept of material selection, a case study is provided of table along with mathematical calculations and process steps to reach at final optimum material selection.
Thus case study shows potential of Weighted Property Indices method. The case study serves as a beneficial example for material selection of modern automobiles.
Manufacturing Properties of the materials
Manufacturing technology refers to the tools, techniques, and processes used to produce goods efficiently and cost-effectively. The goal is to meet customer requirements while maximizing productivity and profitability. Examples of goods produced using manufacturing technology include consumer products, industrial machinery, automobiles, aerospace products, medical devices, and building materials. Manufacturing plays a crucial role in economies by creating jobs, driving innovation, and supporting other sectors. It contributes significantly to GDP and exports. In India, the diverse manufacturing sector comprises industries like textiles, chemicals, pharmaceuticals, automobiles, and electronics.
Be i syllabus
This document outlines the topics covered in the Mechanics of Solids course for the first semester. The topics include:
- Introduction to fundamental concepts in mechanics including vectors, units, particles, rigid bodies, and forces.
- Statics principles including analysis of coplanar, concurrent, parallel, and non-parallel forces as well as moments, couples, and equilibrium conditions.
- Analysis of determinate plane trusses using the method of joints and method of sections to determine member forces.
- Concepts of distributed forces, center of gravity, and moment of inertia including properties and theorems related to areas, volumes, and bodies.
- Friction theory covering static friction, sliding friction
Ch01 intro matrl sc-fall2016-sent
The document discusses materials engineering and provides information on various engineering materials topics. It defines materials science and materials engineering. It describes the four levels of materials structure from the macroscopic to sub-atomic level. It lists the main types of materials as metals, polymers, and ceramics. It outlines six categories of materials properties and factors that affect materials selection for applications.
Introduction to Materials Testing
Subject Name: Testing of Materials (TOM)
Subject code: OML751
Unit I: Introduction to Materials Testing
B.E. Mechanical Engineering
Final year, VII Semester.
Open Elective Subject
[As per Anna university syllabus; R-2017]
Mateials
The document discusses the selection of engineering materials. It covers:
(i) Factors that must be considered when selecting materials, including mechanical properties, manufacturing requirements, cost, and availability.
(ii) The complex process of materials selection that involves design, selecting production methods, testing, and evaluation.
(iii) Classifications of common engineering materials like metals, ceramics, polymers, composites, and advanced materials. It provides examples and properties of each class.
Notes 1
The document discusses the selection of engineering materials. It covers:
(i) Factors that must be considered when selecting materials, including mechanical properties, manufacturing requirements, cost, and availability.
(ii) The complex process of materials selection that involves design, selecting production methods, and evaluating performance.
(iii) Classifications of common engineering materials like metals, ceramics, polymers, composites, and advanced materials. It provides examples and properties of each class.
Lecture2_ introduction2_MMS
This document discusses different materials used in daily life, including aluminum, glass, and plastic used in Coca-Cola beverage containers. It provides a brief historical perspective on the development of materials from early civilizations to modern times. The key topics covered include the structure and properties of materials, how processing affects structure, and the relationship between structure, properties, and performance.
1. introduction (materials and method of constrcution)
This document provides an overview of materials and methods used in construction. It discusses the basic construction materials of concrete, steel, clay products and wood. It then covers the types, production methods, properties and uses of various materials like stones, metals, clay products, lime, cements, aggregates and concrete. These materials are used in structures like buildings, bridges, highways, etc. The document also discusses classifying materials according to phase and internal structure/composition, and determining materials properties through laboratory and field testing.
SamNola_July2016-s
The document summarizes the qualifications and experience of Samanthule Nola. She has a PhD in Macromolecular Science and Engineering from the University of Michigan, where her dissertation focused on crystallization and clustering in systems of hard polyhedra using computational simulations. Her research experience includes computational modeling of self-assembly processes and experimental work in energy conversion materials and ceramic processing. She has strong skills in materials characterization, computational modeling, and laboratory techniques.
BLANK.pptx
This document outlines the units of study for a materials testing course. The 5 units cover: 1) an introduction to materials testing, 2) mechanical testing methods like hardness and tensile tests, 3) non-destructive testing techniques, 4) material characterization methods using microscopy and spectroscopy, and 5) other testing methods such as thermal, thermomechanical, and chemical analyses. The course aims to teach students the principles, techniques, advantages, limitations and applications of various materials testing methods over 45 class periods.
Similar to Oml753 selection of materials l t p c (20)
Materials Technology for Engineers pre-test 1 notes
Materials Technology for Engineers pre-test 1 notes
Mme 323 materials science week 1 - intro to materials science & engineering
Mme 323 materials science week 1 - intro to materials science & engineering
chapter1_intro_sainsbahan_edar (2).pdf material science
chapter1_intro_sainsbahan_edar (2).pdf material science
Evaluation Methods for Material Selection with Case Study
Evaluation Methods for Material Selection with Case Study
1. introduction (materials and method of constrcution)
1. introduction (materials and method of constrcution)
Recently uploaded
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Gas agency management system project report.pdf
The project entitled "Gas Agency" is done to make the manual process easier by making it a computerized system for billing and maintaining stock. The Gas Agencies get the order request through phone calls or by personal from their customers and deliver the gas cylinders to their address based on their demand and previous delivery date. This process is made computerized and the customer's name, address and stock details are stored in a database. Based on this the billing for a customer is made simple and easier, since a customer order for gas can be accepted only after completing a certain period from the previous delivery. This can be calculated and billed easily through this. There are two types of delivery like domestic purpose use delivery and commercial purpose use delivery. The bill rate and capacity differs for both. This can be easily maintained and charged accordingly.
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Recently uploaded (20)
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Oml753 selection of materials l t p c
- 1. OML753 SELECTION OF MATERIALS L T P C 3 0 0 3 OBJECTIVES: The subjectexposesstudentstothe basics parameterforselectionof materialsanddifferentclasses of materials, manufacturing processes and their properties, applications of materials. UNIT I ENGINEERING MATERIALS 9 Introduction –classificationof engineeringmaterials –selectionof materialsforengineeringpurposes –selection of materials and shape –classificationmetal and alloys, polymers, ceramics and glasses, composites,natural materials,-nonmetallicmaterials- smartmaterials - physical,metrical properties of metals UNIT II MATERIAL PROPERTIES 9 Mechanical properties – fatigue strength – fracture Toughness - Thermal Properties - Magnetic Properties - Fabrication Properties –electrical , optical properties - Environmental Properties , Corrosion properties –shape and size - Material Cost and Availability– failure analysis UNIT III MANUFACTURING PROCESSING AND ECONOMIC ANALYSIS 9 Interaction of Materials Selection, Design, and Manufacturing Processes - Production Processesand Equipment for Metals - Metal Forming, Shaping, and Casting - Plastic Parts Processing - Composites FabricationProcesses - AdvancedCeramicsProcessing –surface treatment- Resource -The Price and Availability of Materials UNIT IV MATERIALS SELECTION CHARTS AND TESTING 9 Ashbymaterial selectioncharts-Testingof MetallicMaterials - PlasticsTesting- Characterizationand Identificationof Plastics- Professional andTestingOrganizations - CeramicsTesting- Nondestructive Inspection. UNIT V APPLICATIONS AND USES 9 Selection of Materials for Biomedical Applications - Medical Products - Materials in Electronic Packaging - Advanced Materials in Sports Equipment - Materials Selection for Wear Resistance - Advanced Materials in Telecommunications - Using Composites - Manufacture and Assembly with Plastics, fiber and Diamond Films. TOTAL : 45 PERIODS OUTCOMES: of availability materials TEXT BOOKS: 1. Ashby, M. F. Materials selection in mechanical design, 3rd edition. Elsevier, 2005.
- 2. 2. Ashby, M. F. and Johnson, K. Materials and design – the art and science of material selectionin product design. Elsevier, 2002. REFERENCES: 1. Charles, J. A., Crane, F. A. A. and Furness, J. A. G. Selectionand use of engineering materials, 3rd edition. Butterworth-Heinemann, 1997 2. Handbook of Materials Selection. Edited by Myer Kutz2002 John Wiley & Sons, Inc., New York.