Renewable and Non renewable resources by Komal BhardwajKomal Bhardwaj
It contains natural resource classification as renewable and non-renewable resources differences between both. ViSUALS of renewable and non renewables as how they are in real. Advantages and disadvantages of both. FIGURES to show DATA about every resource. How India accomplishes its need of energy.
Renewable and Non renewable resources by Komal BhardwajKomal Bhardwaj
It contains natural resource classification as renewable and non-renewable resources differences between both. ViSUALS of renewable and non renewables as how they are in real. Advantages and disadvantages of both. FIGURES to show DATA about every resource. How India accomplishes its need of energy.
Global Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy Future
Module-1 Non Conventional Energy sourcesDr Ramesh B T
Energy source, India’s production and reserves of commercial energy sources, need for nonconventional energy sources, energy alternatives, solar, thermal, photovoltaic. Water power, wind biomass, ocean temperature difference, tidal and waves, geothermal, tar sands and oil shale, nuclear (Brief descriptions); advantages and disadvantages, comparison (Qualitative and Quantitative). Solar Radiation: Extra-Terrestrial radiation, spectral distribution of extra terrestrial radiation, solar constant, solar radiation at the earth’s surface, beam, diffuse and global radiation, solar radiation data. Measurement of Solar Radiation: Pyrometer, shading ring pyrheliometer, sunshine recorder, schematic diagrams and principle of working.
Global Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy FutureGlobal Warming & Our Energy Future
Module-1 Non Conventional Energy sourcesDr Ramesh B T
Energy source, India’s production and reserves of commercial energy sources, need for nonconventional energy sources, energy alternatives, solar, thermal, photovoltaic. Water power, wind biomass, ocean temperature difference, tidal and waves, geothermal, tar sands and oil shale, nuclear (Brief descriptions); advantages and disadvantages, comparison (Qualitative and Quantitative). Solar Radiation: Extra-Terrestrial radiation, spectral distribution of extra terrestrial radiation, solar constant, solar radiation at the earth’s surface, beam, diffuse and global radiation, solar radiation data. Measurement of Solar Radiation: Pyrometer, shading ring pyrheliometer, sunshine recorder, schematic diagrams and principle of working.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
3. Introduction
3
• Energy - Energy can be defined as the ability (or) capacity to
do work.
• Different forms of energy:
- due to chemical reaction
- due to flow of electron
- due to thermal vibration
- due to radiation of light
- due to moving parts
- due to nuclear reaction
(1)Chemical energy
(2) Electrical energy
(3)Heat energy
(4) Light energy
(5)Mechanical
energy
(6)Nuclearenergy
etc.
4. Introduction
4
• The S
Iunit of Energy is Joule (or)N/m
• Law of conservation of Energy: According to law of
conservation of energy, Energy can neither be created nor
destroyed. But, one form of energy can be converted to
another form.
• Examples:
1. A heater convert electrical energy into heat energy.
2.A battery converts chemical energy into electrical energy.
etc.
5. Energy Sources
5
• T
he available energy sources can be divided into two
categories.
1. Primary Energy Sources
2. Secondary Energy Sources
6. Primary Energy Sources
6
• The energy sources which provide a net supply of energy are
defined asPrimary Sources.
• Examples are Coal, Oil, Natural Gas and Nuclear.
Secondary Energy Sources
• T
hese sources produce no net energy.
• Examples include Solar
, Wind, Water (Hydro, Tidal, Wave etc.)
• T
hese sources produce no harm to the environment and
earth.
8. Energy Sources
Coal 32.5%
92%
(commercial)
Oil 38.3%
Natural Gas 19.0%
Nuclear 0.13%
Hydro 2.0%
Wood 6.6%
8%
(non-commercial)
Dung 1.2%
Waste 0.3%
33%
38%
19%
7
%
2
%
0
%
0
%
1
%
• T
able below gives the %usage of various energy sources
Chart Title
Coal
Oil
Natural Gas
Nuclear
Hydro
Wood
Dung
Waste
8
(source: Book)
9. Energy Sources
9
• From above table we see that the non-commercial sources
contributes a huge 8%of total energy demand.
• This is 4 times the energy produced by Hydro and 60 times more
than that of Nuclear energy.
• Indeveloping nations the non-commercial sources play a
significant role in energy supply, and this dependence is likely to
grow continuously unless some alternate sources are adopted.
10. Energy Sources
• Table below gives the %usage of various energy sources (India)
Coal 56.9%
66.3%
Conventional
(Non-Renewable)
Oil 0.2%
Natural Gas 7.2%
Nuclear 2.0%
Hydro 14.2%
33.7%
Non-Conventional
(Renewable)
Solar 6.9%
Wind 10.0%
Bio Mass 2.6%
57%
0
%
7
%
2
%
14%
7
%
10%
3
%
Chart Title
Coal
Oil
Natural Gas
Nuclear
Hydro
Solar
Wind
Bio Mass
10
12. 1. Coal
12
• Coal is a non-renewable energy source because it takes millions
of yearsto form. That means what isin the ground now isall
there isand we can’t realistically make more.
• Since the advent of industrialization, the Coal has been the most
common source of energy.
• To generate energy from coal, mainly it is burnt in Boilers and
Heat energy is produced, which in turn is used to generate other
forms of energy such as Electricity.
13. How Coal is formed
13
• The energy in coal comes from energy that was stored in trees
that lived hundredsof millions of yearsago in swamp forests,
even before the dinosaurs!
• When these trees died, they formed layers at the bottom of
the swamps. Water and dirt began to pile up on top of the
dead plant.
• Over thousands of years pressure and heat would build up on
top of the plant remains, undergoing chemical and physical
changes and pushing out the oxygen, turning these remains into
what we call coal.
14. Types of coal
14
• The geological process of changing something under the effect
of temperature and pressure is called metamorphism.
1. Peat is generally considered a precursor of coal, but it has been
used as a fuel in some areas — most notably in Ireland and
Finland. In its dehydrated form, it can help soak up oil spills.
2. Lignite is the lowest quality and the first to be formed.
3. Sub-Bituminous Coal ismost often used as fuel for steam-
electric power generation.
15. Types of coal
15
4. Bituminous Coal is a dense sedimentary rock, generally of a
high-quality.
5. Steam coal isa transition type between bituminous and
anthracite.
6. Anthracite isthe highest rank of coal. I
t’s a hard, glossy rock
and highly valued for its properties.
7. Graphite isnot generally considered a type of coal because it
cannot be used for heating. It is most often used in pencils or as
a lubricant (when powdered).
17. The Adverse Effects Of Coal
17
• Coal isone of the main contributors to global warming, and
coal mining and its fueling of power stations cause major
environmental damage.
• Coal mining had been very dangerous. The list of coal mine
accidents is long, and even today, accidents are still surprisingly
common.
• Many miners also suffer from Coal-worker’s Pneumoconiosis,
also known as“Black Lung”.
18. The Adverse Effects Of Coal
18
• Coal pollution alone is responsible for one million deaths
annually across the world;
• According to a US report published in 2004, coal-fired power
plants shorten nearly 24,000 lives each year in the US(2,800
from lung cancer).
• Burning coal releases great quantities of carbon dioxide into
the air and also releases methane — a much more potent
greenhouse gas.
19. Thermal Power in India
• I
ndia'selectricity sector isdominated by fossil fuels, and in
particular coal, which in 2017-18 produced about three fourths
of all electricity.
• However, the government is pushing for an increased
investment in renewable energy.
• The National Electricity Plan of 2018 prepared by the
Government of I
ndia states that the country does not need
additional non-renewable power plants in the utility sector until
2027.
22
20. 2. Oil
20
• Almost 40%of the total energy needs of the world is fed by Oil.
• The rising prices of Oil has brought a considerable strain to the
world economy.
• With today’s rate of consumption of oil and what we have in
reserve, the oil will last for about 100 years, unless more oil source
isdiscovered.
21. 3. Natural Gas
21
• Natural Gas isan incompletely utilised resource available at the
bottom of earth.
• Its huge quantity is burnt off in the oil production process.
• It is not fully utilised due to non availability of ready market and
due to it’s high transportation cost.
• Gaseousfuels can be classified as:
1. Gases of fixed composition such as Acetylete, Ethylene, Methane etc.
2. Composite industrial gases such as coke oven gas, blast furnace gas etc.
22. 4. Nuclear Energy
22
• Nuclear power isthe use of nuclearreactions that releases
nuclear energy to generate heat, which most commonly is then
used in steam turbines to produce electricity in a Nuclear Power
Plant.
• Nuclear power can be obtained from nuclear fission, nuclear
decay and nuclear fusion reactions.
• At present majority of electricity isproduced by Nuclear fission
of Uranium and Plutonium.
24. NCES(Non-Conventional Energy Sources)
• The NCES are Solar
, Wind, Sea/Ocean, Geothermal, Biomass
etc.
• Many people are continuously trying to find more NCES.
• The other terms used to describe the non-conventional energy
are ‘Alternative’, ‘Appropriate’, ‘Natural’, ‘New’, and
‘Renewable’.
25. RENEWABLE ENERGY POTENTIAL IN INDIA
Sr. No Energy Sources
Country
Potential
Installed
Capacity
1. Biomass & Waste 60000 MW 4278.87 MW
2. Small hydro 15,000 MW 3496.14 MW
3. Wind 100000 MW 18420.4 MW
4. Solar Energy 200000 MW 1282.58 MW
5 Geothermal 10 GW 4 MW
26. 1. Hydro Energy
26
• The energy form water is generated by allowing the water to fall
under the force of gravity.
• I
t isused almost exclusively for Electricity generation.
• The Potential energy of the water is converted into Mechanical
energy through Hydraulic Turbines, which in turn moves the
Generator which generates Electricity.
• T
he capital cost of Hydro Electric Plant is very high as
compared to other kinds of power plants.
• The operating cost of these plants is low as no fuel isrequired.
27. 2. Solar Energy:
web
• Energy produced through the sunlight is called solar energy.
• Sun’s energy comes to earth in form of Light and Heat. This
energy keeps the temperature of earth’s atmosphere at normal
level, so that living things can survive, the heat causes currents in
atmosphere (wind) and ocean (tide), causes the water cycle
and generates photosynthesis in plants.
• Solar energy can be utilized in two ways, either T
hermally or by
Photovoltaics.
32
28. 28
• The solar photovoltaic cells are exposed to sunlight and in turn
the electricity is produced. Photovoltaic cells converts the sun
light energy into electricity.
• The Solar energy’s potential is about 178 Billion MW, which is
around 20000 timesmore than the world’s total energy
demand.
• Various applications of Solar energy are:
1. Solar Water Heating
2. Solar Cookers
2. Solar Energy:
29. 29
3. Solar engine for water pumping.
4. Street Lights
5. Solar drying of agricultural and animal products.
6. Salt production by sea water evaporation.
7. Heating and Cooling of Residential buildings.
8. Solar Furnace.
9. Solar distillation.
10.Electric power generation by Solar Ponds, Steam Generators
heated by rotating reflectors and Photovoltaic cells.
2. Solar Energy:
30. 3. Wind Energy:
30
• Energy can be produced by harnessing the wind power.
• Wind iscaused by mainly two reasons:
1. Heating & Cooling of the atmosphere which generates
convection current.
2. The Rotation of Earth with respect to its atmosphere and its
motion around the Sun.
• The potential of wind energy is very large which is estimated to
be about 1.6x107 MW.
31. 3. Wind Energy:
31
• Wind Energy is an indirect source of Solar Energy. Why?
• In India generally the wind speed is low. Therefore attempts are
being made for development of low speed, low cost wind mills.
• Special focus is on development of mill for water pumping
which can operate at low wind speed of 8-36 km/hr
. Which can
be utilised for providing drinking water in small rural area,
irrigation of small farms.
• I
n I
ndia high speed winds are available in coastal areasof
Saurashtra, Rajasthan and some parts of central India.
32. 3. Wind Energy:
• In these area we can use high speed wind mills, to generate
Electricity and feeding the same to the grid.
• Wind Mill Types:
1. Multi-blade type Wind Mill
Horizontal Axis
Vertical Axis
2. Sail type
3. Propeller type
4. Savonius type
5. Darrieus type
32
33. 3. Wind Energy:
33
• Characteristics of Wind Energy:
1
. I
t isa renewable source of energy.
2. Wind power systems are non-polluting and has no adverse
effects of the environment.
3. Wind energy systems avoids fuel provision and transport.
4. On small scale of upto few kilowatts, it is less costly. On large
scale the costs are comparable with the costs of
conventional energy sources, but low cost can be achieved
by massproduction.
34. 3. Wind Energy:
34
• Problems with Wind Energy:
1. Availability of wind is fluctuating or irregular in nature.
2. Unlike water energy, it requires storage means because of
irregularnature.
3. Wind energy systems are noisy in operation; a large unit can
be heard many km away.
4. Large area is needed for installation of Wind Farms, for
Electricity generation.
35. 3. Wind Energy:
35
• I
t isused for operating water pumps for irrigation purposes.
Approximately 2756 wind pumps were set up for thispurpose.
• In seven states, wind power operated power houses were
installed and their installed capacity is 1000 MW.
• I
ndia has second position in wind power energy generation.
36. 4. Bio Mass and Bio Gas
• Bio Massmeans Organic Matter.
• The Bio-mass is produced in nature through Photosynthesis
achieved by solar energy conversion.
• I
n simplest form the reactions in the Photosynthesiscan be
represented as:
6H2O +6CO2 C6H12O6 +6O2
• Inthis reaction, the water and carbon dioxide are converted
into organic material C6H12O6 which is basic molecule of stable
carbohydrate at low temperature.
36
37. 4. Bio Mass and Bio Gas
• At high temperature, it breaks and releases Heat of amount
equal to 112 kcal/mole or 469 kJ/mole.
C6H12O6 +O2 CO2 +H2O +112 kcal/mole
• So the absorbed energy of photons is converted into
carbohydrate which can then be used as source of energy.
• I
t ispossible to produce large amount of carbohydrate by
growing Algae (say) under suitable conditions, in plastic tubes or
in ponds.
37
38. 4. Bio Mass and Bio Gas
38
• Then the Algae, which is our Bio-Mass in this example, could be
harvested, dried and burned for production of heat that could
be converted into Electricity.
• The energy from Bio-Mass is taken by burning it directly or by
further processing it to produce more convenient liquid and gas
forms.
39. 4. Bio Mass and Bio Gas
• The Bio-Mass resources falls into three categories:
1. Bio-Mass in its traditional solid form. (e.g. Wood, agri waste etc.)
This form is directly burned to get energy.
2. Bio-Mass in its non-traditional form (converted into liquid form)
In this category the Bio-Mass is converted into liquid from such
asEthanol & Methanol, which can be used asliquid fuel in
engines
3. Bio-Mass in Fermented form. Inthis category Bio-mass is
fermented to obtain its Gaseous fuel called Bio-Gas. Bio-gas
has 55-65%Methane, 30-40%CO2 and rest impurities containing
H2, H2Sand some N2.
44
40. 3. Bio Mass and Bio Gas
40
• Energy Plantation: For large scale production of electricity, use
of fire wood as a fuel for the boiler of a conventional power
plant is called Energy Plantation scheme. In this some selected
species of trees are planted and harvested over regular time
period, on land near a power plant.
• This requires a large area near power plant for plantation
purpose.
• T
he trees which are suggested for I
ndia are Eucalyptus,
Casuarina and Babool.
41. 3. Bio Mass and Bio Gas
41
• Bio-Gas: The main source for production of bio-gas is wet cow
dung (gobar) or wet livestock waste (or even Human waste).
• The bio-gas has a particular significance in India because of
large cattle population, which isabout 250 million.
• Some other sources of bio-gasare: Sewage, Crop residue,
vegetable waste, poultry waste, algae etc.
42. 4. Ocean Thermal Energy Conversion (OTEC)
42
• This is also as indirect source of Solar Energy.
• The tropical oceans absorb a large amount of solar energy. The
surface of ocean acts as collector of heat, while the
temperature in the depths is20-25 ºc lower.
• This difference in temperature is used to obtain energy.
• T
he surface water
, which isheated, isused to heat some low
boiling organic fluid such as ammonia, propane, R-12, R-22, etc.
• T
hen the vapourproduced will run the heat engine.
43. 4. Ocean Thermal Energy Conversion (OTEC)
43
• The exit vapour is condensed using cold ocean water of deeper
regions.
• Several such plants were build in France with capacity upto 7.5
MW.
• T
he OTEC works in Closed Rankine Cycle.
• In India the Department of Non-Conventional Energy Sources
(DNES) hasproposed to set up a 1 MW OTEC plant in
Lakshadweep Islnd.
44. 4. Ocean Thermal Energy Conversion (OTEC)
• Rankine Cycle OTEC
44
45. 5. Tidal Energy
45
• The Tides in the sea are result of the universal gravitational
effects of the Sun and Moon on the Earth.
• T
hiscauses a periodic rise and fall of the sea water level with
daily rising and setting of the Sun and Moon.
• These tides can be used to produce electricity which is known
asT
idal power.
• When the water isabove the mean sea level it iscalled flood
tide, and when it is below it’s called ebb tide.
46. 5. Tidal Energy
• To harness the power of tides, a dam is built near the coastal
area. The dam has large gates to let the water in and out. A low
head hydraulic reversible Turbine is used which in turn generates
electricity.
46
47. 5. Tidal Energy
47
• A tidal basin is formed, which is separated from the sea by the
dam. With every tide, a difference in water levels of the sea and
the basin isobtained.
• The basin is filled with water with high tide and emptied with low
tide, with the water passing through the T
urbine.
• The turbine is reversible type which can operate in both
directions of rotation.
• The turbine is coupled with a Generator, which generates
Electricity.
48. 5. Tidal Energy
48
• The tidal plant shown in figure is called as Single Basin Plant. The
problem with such plants is that it can not generate electricity
continuously.
• To overcome this drawback, two basin plants can be used.
• Due to the absence of cost effective technology, and
unavailability of continuous tides, this source of energy is not fully
utilized.
49. 6. Geothermal Energy
49
• This energy is embedded within the Earth. The Earth has molten
core and various volcanic activities occurs in many places.
• Due to the heat, the ground water is converted into steam and
sometimes the hot water and steam comes out naturally due to
high pressure.
• For large scale use, we can bore holes (Steam Wells) for upto
1000m, which will release the steam & hot water with
temperature upto 200-300 ºc.
• These steam can be used to operate steam turbine which will
generate electricity.
51. 6. Geothermal Energy
51
• The water coming out of steam wells contains high amount of
dissolved minerals, and the steam contains these water
molecules.
• So the moisture and solid particles needs to be separated out
from the steam before being fed to the steam turbine.
52. 7. Hydrogen Energy
52
• The Hydrogen can play an important role as an alternative
source of energy.
• Its burning process is non-polluting and it can be used in the fuel
cells too.
• Hydrogen has highest energy content per unit of mass as
compared to any other chemical fuels.
• One of the most attractive feature of Hydrogen is that, it can be
produced from water which iseasily & abundantly available in
nature.
53. 7. Hydrogen Energy
53
• T
he problems with Hydrogen Energy are:
1. Hydrogen isnot freely available in nature, it hasto be
produced.
2. technical problems in production of Hydrogen, its storage and
transportation.
54. 8. Fuel Cells
• It is defined as an electro-chemical device which continuously
converts the fuel into electrical energy.
• The difference between a fuel cell and a battery is that, the
battery generates electricity from the energy which is stored in
it. While, the fuel cell generates electricity from fuel which is
stored in an external tank.
• So, a battery may become dead, while a fuel cell will run until
the fuel supplied to it.
59 Qu. Write difference between Fuel Cell and Battery.
55. 8. Fuel Cells
55
• Some types of fuel cell are: Hydrogen-Oxygen (H2, O2),
Hydrazine-Oxygen (N2H4, O2), Carbon/Coal-Oxygen (C, O2),
Methane-Oxygen (CH4, O2).
• Hydrogen-Oxygen fuel cells (Hydrox) are most efficient and
highly developed cell among all.
• Inthis two porous carbon or nickel electrodes are immersed in
an electrolyte. The electrolyte is usually 30%KOH due to its high
electrical conductivity and low corrosiveness.
• In the fuel cells the prime requirement of electrolyte is that, it
should not change as the cell operates.
56. 8. Fuel Cells
• The H2 fed at one end, is absorbed by electrode, which gives
free electrons and it also reacts with Hydroxyl ions (OH-) of
electrolyte to form H2O.
56
57. 8. Fuel Cells
• The free electrons travel from one electrode to another through
external circuit, causing current.
• T
hese electrons reacts with the H2O and the O2 being fed from
another side, and formsHydroxyl ions (OH-).
• T
he OH- ions generated are consumed in the electrolyte and
thus the electrolyte remains unaffected.
H2
2H+ +2OH-
O2
2H+ +2e-
2H2O
2O
57
O +H2O +2e- 2OH-
58. 8. Fuel Cells
58
• These type of cells operate at (or slightly above) the
atmospheric pressure and at temperature of about 90 ºc. These
cells are also called as Low Pressure and Low temperature cells.
• In high pressure cells the pressure may go upto 45 atmospheric
and temperature may go upto 300 ºc.
• A single Hydrogen-Oxygen fuel cell produces an emf of 1.23
volts. By connecting more cells in proper arrangement we can
get highervalues of voltage and power.
59. 8. Fuel Cells
• Advantages of fuel cells:
1. It is a direct conversion process and does not involve a thermal
process, so it hashigh efficiency (38%- 60%).
2. The cell unit is small, light weight and requires low maintenance.
3. Fuel cells use may reduce the transmission losses.
4. Very low pollution and noise, it can easily be used in residential
areas.
• Drawbacks includes low voltage output, high initial costs and
low service life.
64
60. 9. MHD (Magneto Hydro-Dynamic) Power
60
• T
he principle of MHD power generation isbased on direct
conversion of Thermal Energy into Electrical Energy.
• Itis based on the Faraday’s principle: “When an electric
conductor ismoved across a magnetic field, a voltage is
induced in it which produces electric current.”
• I
n MHD generation solid conductor is replaced by electrically
conducting fluid, which may be either an ionised gas or liquid
metal.
62. 9. MHD (Magneto Hydro-Dynamic) Power
62
• As shown, Hot, partially ionised and compressed gasispassed
through a strong magnetic field in a duct, which causes
generation of electrical potential in the gas.
• Electrodes placed at the two ends of the duct, pick up the
potential generated in the gas.
• In this manner the Direct Current (DC) is obtained, which can be
later converted into AC using an inverter.
• An experimental MHD plant of 5 MW is set up in Tiruchirapalli.
63. Suggested Study
63
• Advantages & Disadvantages (Merits & Demerits )of Non-
conventional / Renewable energy sources.
• Obstacles in implementation of NCES.
• Prepare answers of previous year’s questions and questions
given in the book.
• Note: Energy Storage (of Solar
, Wind etc.) will be studied in
upcoming units.